0

Rear bike light with replaceable 18650 battery?

preview

cross-posted from: lemmy.ml/post/55355487

Has anyone found a red rear bike light that takes a replacable 18650 battery? There are suitable headlamps, if anyone has a good solution for mounting headlamps or other flashlights at the proper angles?

I like the Fenix BC06R a lot and bike lights are usually my one exception for buying lights without a replacable battery. Just checking to see if anyone’s got an 18650 light.

Thanks in advance!

cross-posted from: lemmy.ml/post/55355487

Has anyone found a red rear bike light that takes a replacable 18650 battery? There are suitable headlamps, if anyone has a good solution for mounting headlamps or other flashlights at the proper angles?

I like the Fenix BC06R a lot and bike lights are usually my one exception for buying lights without a replacable battery. Just checking to see if anyone’s got an 18650 light.

Thanks in advance!

0

Crashed the kickball tailgate at the local park to throw frisbee by the light of a Wurkkos TS27

A girl throws a frisbee in the dark. A small tripod holds up a flashlight in lantern mode, illuminating the grass.
preview

I know not everyone has kids, but I think this is a great “family” light. To be integrated into activities and to do new things the light facilitates. It helps me create fun moments with them. It was nice to just blast it on high lantern and play for a while, without worrying about battery capacity. The kickballers were playing fun music and we danced and threw the disc and football around the light.

Tripod is a Neewer M521 Desktop Mini Tripod with Arca-Type Ball Head (19.7"), but just get whatever little tripod is on flash sale at B&H Photo (New York) at the moment. I saved $10 USD on this one.

TS27, tripod, other lights, pepper spray, it all will fit into the tactical purse that they have on clearance for $15 at your local Ross or Fred’s or equivalent discount department store.

Brown shoulder sling bag with Molle webbing and an IWW patch. Hand sanitizer is attached and a gold Wurkkos WK03 flashlight stuck in the webbing.

An assortment of lights between the blue TS27 and the collapsed tripod.

I know not everyone has kids, but I think this is a great “family” light. To be integrated into activities and to do new things the light facilitates. It helps me create fun moments with them. It was nice to just blast it on high lantern and play for a while, without worrying about battery capacity. The kickballers were playing fun music and we danced and threw the disc and football around the light.

Tripod is a Neewer M521 Desktop Mini Tripod with Arca-Type Ball Head (19.7"), but just get whatever little tripod is on flash sale at B&H Photo (New York) at the moment. I saved $10 USD on this one.

TS27, tripod, other lights, pepper spray, it all will fit into the tactical purse that they have on clearance for $15 at your local Ross or Fred’s or equivalent discount department store.

Brown shoulder sling bag with Molle webbing and an IWW patch. Hand sanitizer is attached and a gold Wurkkos WK03 flashlight stuck in the webbing.

An assortment of lights between the blue TS27 and the collapsed tripod.

0

[Review] Loop Gear SK06 – when you want flat flashlight features in a cylindrical form

preview

Summary

The Loop Gear SK06 combines a white spotlight, UV light, a laser and an omnidirectional RGBW side light in a cylindrical body powered by a replaceable 18650 Li-ion battery. It is operated intuitively using a combination of a button and a rotary switch.

The side light is particularly interesting, as it not only creates a pleasant atmosphere but also serves as a marker light (“E-Tritium”) when the flashlight is switched off, making it easier to locate in the dark. The battery can be charged directly inside the flashlight via USB-C and it can also be used as a power bank when needed.

The overall impression is somewhat diminished by the fact that the position of the rotary ring cannot be identified by touch in the dark. I also get the impression that the flashlight’s full potential is not being utilized in Turbo mode. Charging takes longer than expected and the bright charging indicator can be annoying.

Nevertheless, overall the SK06 was a pleasant surprise for me. It is rare to find such a wide range of features in such a compact body, especially in combination with a replaceable battery.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Loop Gear SK06 combines a white spotlight, UV light, a laser and an omnidirectional RGBW side light in a cylindrical body powered by a replaceable 18650 Li-ion battery. It is operated intuitively using a combination of a button and a rotary switch.

The side light is particularly interesting, as it not only creates a pleasant atmosphere but also serves as a marker light (“E-Tritium”) when the flashlight is switched off, making it easier to locate in the dark. The battery can be charged directly inside the flashlight via USB-C and it can also be used as a power bank when needed.

The overall impression is somewhat diminished by the fact that the position of the rotary ring cannot be identified by touch in the dark. I also get the impression that the flashlight’s full potential is not being utilized in Turbo mode. Charging takes longer than expected and the bright charging indicator can be annoying.

Nevertheless, overall the SK06 was a pleasant surprise for me. It is rare to find such a wide range of features in such a compact body, especially in combination with a replaceable battery.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

NLD: Convoy L21B with deep red SST-20-DR for wildlife spotting. Fam is calling it the owl blaster.

A flashlight finished in s splattery black camo pattern.
preview

First time out with it in my back yard and I saw bats at dusk. If they noticed being in a red beam, I couldn’t tell.

Treetops are maybe 200 feet away? Red beam shot into treetops 200 feet away, spill illuminating the house.

It’s not as big as I thought it’d feel. This is it next to a Wurkkos FC11C, since many have that light. However, the holster does make it feel ginormous…in a nerdy good way. Size comparison next to Wurkkos FC11C.

First time out with it in my back yard and I saw bats at dusk. If they noticed being in a red beam, I couldn’t tell.

Treetops are maybe 200 feet away? Red beam shot into treetops 200 feet away, spill illuminating the house.

It’s not as big as I thought it’d feel. This is it next to a Wurkkos FC11C, since many have that light. However, the holster does make it feel ginormous…in a nerdy good way. Size comparison next to Wurkkos FC11C.

0

11.11 Singles Day sale flashlight recommendations/scores?

Order confirmation showing a Lumintop FWAA for $39.66 USD and an Alonefire SV43 for $46.99
preview

AliExpress is having its annual Singles Day sale. Anyone snagged a good deal? If you’ve never used AliExpress before and have always wanted an Acebeam X75, this is the time to do it. Best deals are for new users/email addresses. Also, get the mobile app and figure out the silly Coins stuff for a few extra cents off.

I got this Titanium FWAA for $40 USD because I used a new user discount in addition to 11.11 coupons. That’s easy enough to do by creating a new email address. The Alonefire SV43 is recommended by 1lumen in their 2026 UV roundup. I want to cook some UV resin and glow dust instead of using tritium tubes. Plus find weird UV-reflective things in the wild? I dunno, never had a UV light!

AliExpress is having its annual Singles Day sale. Anyone snagged a good deal? If you’ve never used AliExpress before and have always wanted an Acebeam X75, this is the time to do it. Best deals are for new users/email addresses. Also, get the mobile app and figure out the silly Coins stuff for a few extra cents off.

I got this Titanium FWAA for $40 USD because I used a new user discount in addition to 11.11 coupons. That’s easy enough to do by creating a new email address. The Alonefire SV43 is recommended by 1lumen in their 2026 UV roundup. I want to cook some UV resin and glow dust instead of using tritium tubes. Plus find weird UV-reflective things in the wild? I dunno, never had a UV light!

0

Wurkkos TS27 was the Halloween work horse that powered the kiddo’s candy haul.

The inside of a large green beach bag filled with colorful US-branded candy.
preview

[Beamshot! That’s it in the middle of the bag. Edit: This is candy collected on Halloween holiday in the US.]

RGB mode for most of the walking around and neighbor chatting. Spotlight for when a car comes or when we need to light up a dark candy bowl. Warm CCT lantern for water breaks, eating from and examing the stash.

RGB mode needs memory lol…maybe that’s a feature, haven’t studied the manual.

Little awkward to cary all night, especially in a costume, but not too bad. The grooves actually made it ‘fidgety.’

Will definitely be taking this one out again next year.

[Beamshot! That’s it in the middle of the bag. Edit: This is candy collected on Halloween holiday in the US.]

RGB mode for most of the walking around and neighbor chatting. Spotlight for when a car comes or when we need to light up a dark candy bowl. Warm CCT lantern for water breaks, eating from and examing the stash.

RGB mode needs memory lol…maybe that’s a feature, haven’t studied the manual.

Little awkward to cary all night, especially in a costume, but not too bad. The grooves actually made it ‘fidgety.’

Will definitely be taking this one out again next year.

0

Got the Wurkkos TD01C on a whim. Feeling regret. Anyone come to love a pencil beam thrower after initial skepticism?

A 21700 size gray flashlight with lots of heat fins and a large head.
preview

The only good use case I’ve come across is looking at house numbers at night without lighting up the whole house. Generally I’m not a “it’s just fun to see far” kind of person.

And yes, I know there are better performing lights that cost less. I was already making a Wurkkos order and it just fell into my cart.

The only good use case I’ve come across is looking at house numbers at night without lighting up the whole house. Generally I’m not a “it’s just fun to see far” kind of person.

And yes, I know there are better performing lights that cost less. I was already making a Wurkkos order and it just fell into my cart.

0

TS10 flaky switch remedies?

preview

The usual thing where the contact between the inner battery tube and the outer PCB ring gets unreliable. Cleaning the tube end fixes it temporarily but then it acts up again soon. This is a TS10SG if that matters. The problem is apparently common with TS10’s and also (maybe less so?) with the Emisar KR1AA.

Is there a more permanent fix than cleaning? Like applying some kind of plating or coating? If they make a titanium body TS10v3, would that help, since it shouldn’t oxidize the way aluminum does? Should I give up and get a D3AA? I’m not that keen on the D3AA because of the larger head diameter. Hey Hank, a narrower, single emitter D3AA would appreciated ;).

Was there a titanium KR1AA at one point? I don’t see it listed now.

Thanks

The usual thing where the contact between the inner battery tube and the outer PCB ring gets unreliable. Cleaning the tube end fixes it temporarily but then it acts up again soon. This is a TS10SG if that matters. The problem is apparently common with TS10’s and also (maybe less so?) with the Emisar KR1AA.

Is there a more permanent fix than cleaning? Like applying some kind of plating or coating? If they make a titanium body TS10v3, would that help, since it shouldn’t oxidize the way aluminum does? Should I give up and get a D3AA? I’m not that keen on the D3AA because of the larger head diameter. Hey Hank, a narrower, single emitter D3AA would appreciated ;).

Was there a titanium KR1AA at one point? I don’t see it listed now.

Thanks

0

[Review] Wurkkos HD02 Pro – has it reached perfection?

preview

Summary

With the Pro version, Wurkkos has responded to user feedback and addressed some of the criticisms of its predecessor. The fold-out wings on the Wurkkos HD02 Pro can now also be rotated, allowing the light to be directed in almost any desired direction. Another new feature is a 660 nm red light that helps preserve the eyes’ dark adaptation. The powerful spotlight, UV light and green laser remain largely unchanged.

However, there are problems with the charging function, which has been unreliable for both me and other users. It is currently impossible to determine conclusively whether these are isolated cases or a fundamental issue. The manufacturer was informed of the problems but was unable to provide any concrete information even after several weeks. Another issue is that the plastic diffusers in the wings can come loose when the light is used at high brightness.

I had specifically criticized the non-rotatable floodlight wings on the previous model. Wurkkos has done an excellent job of addressing this issue in the new Pro version. The red light is also a useful addition. The charging problems are all the more disappointing. Otherwise, the Wurkkos HD02 Pro would be nearly perfect.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

With the Pro version, Wurkkos has responded to user feedback and addressed some of the criticisms of its predecessor. The fold-out wings on the Wurkkos HD02 Pro can now also be rotated, allowing the light to be directed in almost any desired direction. Another new feature is a 660 nm red light that helps preserve the eyes’ dark adaptation. The powerful spotlight, UV light and green laser remain largely unchanged.

However, there are problems with the charging function, which has been unreliable for both me and other users. It is currently impossible to determine conclusively whether these are isolated cases or a fundamental issue. The manufacturer was informed of the problems but was unable to provide any concrete information even after several weeks. Another issue is that the plastic diffusers in the wings can come loose when the light is used at high brightness.

I had specifically criticized the non-rotatable floodlight wings on the previous model. Wurkkos has done an excellent job of addressing this issue in the new Pro version. The red light is also a useful addition. The charging problems are all the more disappointing. Otherwise, the Wurkkos HD02 Pro would be nearly perfect.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Federated way to trade/sell lights?

preview

As may be obvious from the frequency of my posts here lately, I’ve been going through the flashlight accumulation startup phase. I’m ready to let some of my early missteps go.

I like the peer-to-peer, no platform fee of something like reddit’s r/flashlight monthly pinned BTS thread. Would there be appetite for something like that here, or does that just make moderation tedious?

Is there already a trade-friendly fedi solution that could support something as specialized as (ahem) enthusiast flashlights? TY in advance.

As may be obvious from the frequency of my posts here lately, I’ve been going through the flashlight accumulation startup phase. I’m ready to let some of my early missteps go.

I like the peer-to-peer, no platform fee of something like reddit’s r/flashlight monthly pinned BTS thread. Would there be appetite for something like that here, or does that just make moderation tedious?

Is there already a trade-friendly fedi solution that could support something as specialized as (ahem) enthusiast flashlights? TY in advance.

0

Six lights I brought to shine in the neighbors’ treetops while catsitting.

Six flashlights arranged in a row on a placemat.
preview

L-R: orange Wurkkos FC11C 4kk, green Emisar DA1K NTG50 4200k, white Emisar DW4 NTG35 1800k/SST20 red 660nm, blue Wurkkos TS27, coyote Acebeam T35 SFT40 5kk, green aluminum reylight pineapple mini.

DA1K was the most pleasing for just admiring the trees. I had lost the T35 in an apron pocket and just found it yesterday. Better beam distance than I remembered.

L-R: orange Wurkkos FC11C 4kk, green Emisar DA1K NTG50 4200k, white Emisar DW4 NTG35 1800k/SST20 red 660nm, blue Wurkkos TS27, coyote Acebeam T35 SFT40 5kk, green aluminum reylight pineapple mini.

DA1K was the most pleasing for just admiring the trees. I had lost the T35 in an apron pocket and just found it yesterday. Better beam distance than I remembered.

0

Does anybody regularly side ride? How often is your torch flung across the room?

A dark blue Noctigon KR4 clipped outside of a pocket with a gray pocket knife clipped nearby inside the pocket.
preview

My pockets grow full. I’m tempted to ride outside more often. Are my lights cruisin’ for a bruisin’ if I take this route? Tell me your horror stories. Cause it sure would make it easier to carry 18650 lights outside in my belt or pocket.

My pockets grow full. I’m tempted to ride outside more often. Are my lights cruisin’ for a bruisin’ if I take this route? Tell me your horror stories. Cause it sure would make it easier to carry 18650 lights outside in my belt or pocket.

0

How you hang your lamps in weird places?

A small red lamp hangs on an adjustable mirror arm.
preview

This is a Wurkkos CL01 that I use in a dark computer nook so people can see me on video phone. It’s hanging on the arm of an adjustable mirror. It works, just curious what others do. I have the tiny tripod for it, but I can’t set it in front of the compy.

This is a Wurkkos CL01 that I use in a dark computer nook so people can see me on video phone. It’s hanging on the arm of an adjustable mirror. It works, just curious what others do. I have the tiny tripod for it, but I can’t set it in front of the compy.

0

[Review] Wurkkos HD02 Mini – Small but Mighty

preview

Summary

For those who find the Wurkkos HD02 too large and heavy as an EDC flashlight, the Wurkkos HD02 Mini is a suitable alternative. Despite its significantly more compact dimensions, it doesn’t skimp on features: in addition to the powerful spotlight, there is a warm-white floodlight and a red light. The foldable wing for use as a small lantern is also included. Details such as the rotary switch, the long two-way clip and the magnetic tailcap with tripod thread complete the package.

With so many features, minor firmware bugs aren’t entirely surprising. However, I do consider it problematic that the adhesive holding the diffuser on the wing can come loose at high brightness. A 660 nm red light would also have been nice.

Overall, I still consider the Wurkkos HD02 Mini a successful EDC flashlight. With its wide range of features, it proves to be a practical companion for everyday use.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

For those who find the Wurkkos HD02 too large and heavy as an EDC flashlight, the Wurkkos HD02 Mini is a suitable alternative. Despite its significantly more compact dimensions, it doesn’t skimp on features: in addition to the powerful spotlight, there is a warm-white floodlight and a red light. The foldable wing for use as a small lantern is also included. Details such as the rotary switch, the long two-way clip and the magnetic tailcap with tripod thread complete the package.

With so many features, minor firmware bugs aren’t entirely surprising. However, I do consider it problematic that the adhesive holding the diffuser on the wing can come loose at high brightness. A 660 nm red light would also have been nice.

Overall, I still consider the Wurkkos HD02 Mini a successful EDC flashlight. With its wide range of features, it proves to be a practical companion for everyday use.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

[Review] Sofirn HS23 – Powerful headlamp with spot/flood/red and intuitive UI

preview

Summary

The Sofirn HS23 has a lot to offer: The headlamp features three channels with spotlight, floodlight and 660 nm red light, which can be conveniently switched between using a rotary switch. It also has an integrated USB-C charging function.

Despite its simple operation and practical features, I have one major criticism of the HS23: It is simply too heavy for a headlamp. Even an 18650 battery feels borderline to me in a headlamp, so a large 21700 battery is all the more unsuitable for this application. Personally, I would prefer a shorter runtime and more frequent battery changes rather than having to wear a relatively heavy flashlight on my forehead for extended periods.

However, the HS23 can make sense when high brightness is required for extended periods. If a helmet is already being worn for work, the additional weight is less of an issue. The good regulation is also an advantage in this case, as it keeps the brightness constant for a long time.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Sofirn HS23 has a lot to offer: The headlamp features three channels with spotlight, floodlight and 660 nm red light, which can be conveniently switched between using a rotary switch. It also has an integrated USB-C charging function.

Despite its simple operation and practical features, I have one major criticism of the HS23: It is simply too heavy for a headlamp. Even an 18650 battery feels borderline to me in a headlamp, so a large 21700 battery is all the more unsuitable for this application. Personally, I would prefer a shorter runtime and more frequent battery changes rather than having to wear a relatively heavy flashlight on my forehead for extended periods.

However, the HS23 can make sense when high brightness is required for extended periods. If a helmet is already being worn for work, the additional weight is less of an issue. The good regulation is also an advantage in this case, as it keeps the brightness constant for a long time.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Convoy AA/14500 L-shaped Light

Simon Mao www.facebook.com
preview

Convoy’s L-shape AA/14500 light appears to be in production.

There appears to be an opening for a USB port on the head. I wonder which driver it will use.

Convoy’s L-shape AA/14500 light appears to be in production.

There appears to be an opening for a USB port on the head. I wonder which driver it will use.

0

[Review] Sofirn SK31 – great hardware, poor software

preview

Summary

Great hardware, poor software – that’s the Sofirn SK31 in a nutshell. The combination of a powerful LMP LHP73B with a well-regulated driver, a two-stage tail switch, a separate switch for the lockout and a screwed cover for the USB-C charging port provide the perfect hardware foundation for a great flashlight.

The operation is all the more disappointing. The two-stage switch leaves much of its potential unused. For example, there is no direct access to the lowest or highest brightness level and in Tactical Mode, the switch must be held halfway down for a full five seconds to keep the flashlight on. Minor firmware bugs make the overall experience even less enjoyable.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

Great hardware, poor software – that’s the Sofirn SK31 in a nutshell. The combination of a powerful LMP LHP73B with a well-regulated driver, a two-stage tail switch, a separate switch for the lockout and a screwed cover for the USB-C charging port provide the perfect hardware foundation for a great flashlight.

The operation is all the more disappointing. The two-stage switch leaves much of its potential unused. For example, there is no direct access to the lowest or highest brightness level and in Tactical Mode, the switch must be held halfway down for a full five seconds to keep the flashlight on. Minor firmware bugs make the overall experience even less enjoyable.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

[Review] Imalent BTL50 – a different kind of zoom flashlight

preview

Summary

The Imalent BTL50 is not a zoom flashlight in the traditional sense, yet the width of its beam can still be adjusted – without any moving parts. This is made possible by an integrated diffuser whose strength can be controlled electronically. This technology is extremely rare in flashlights, but highly practical.

Although the flashlight feels compact and comfortable to handle, the capacity of the built-in battery is somewhat limited for its size. The flashlight stands out with its slightly futuristic design and stylish leather-like covering. The width of the beam is adjusted with a rotary control, which allows for smooth, intuitive operation. A pocket clip or holster, however, would have been a welcome addition.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Imalent BTL50 is not a zoom flashlight in the traditional sense, yet the width of its beam can still be adjusted – without any moving parts. This is made possible by an integrated diffuser whose strength can be controlled electronically. This technology is extremely rare in flashlights, but highly practical.

Although the flashlight feels compact and comfortable to handle, the capacity of the built-in battery is somewhat limited for its size. The flashlight stands out with its slightly futuristic design and stylish leather-like covering. The width of the beam is adjusted with a rotary control, which allows for smooth, intuitive operation. A pocket clip or holster, however, would have been a welcome addition.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

(SOLVED) Which emitter should I get for the Convoy T6 flashlight?

preview

cross-posted from: sopuli.xyz/post/48392158

I can’t decide between the SFT-25R and SFT-40 emitters. The price difference between them is negligible, and every online article seems to have differing opinions on which one has more throw, spill, etc.

Also, I am indecisive on the colour temperature. 5000K is daylight coloured apparently, while 6500K is cooler (blue tinted) and 3000K is warmer (yellow tinted, only available for SFT-40). I don’t like cooler lights, so I guess I will probably go with 5000K (unless 3000K isn’t super warm, then maybe that one?)

I am going with the Conway T6 as it’s compatible with regular AA batteries (like my IKEA Laddas), but as I understand, lights with built-in charging functions (e.g. Skilhunt EC150) usually don’t work with NiMH batteries, only Li-ion 14500 batteries.* I don’t think the Conway T6 has that, but I could be wrong. The T6 also cokes in a really unique purple colour!

*small edit: I meant that the charging bits don’t always work for NiMH batteries for most flashlights, the light itself would still work. The wording is a little unclear, sorry about that!

edit 2: I’m purchasing the T6 w/ the SFT-40 3000K emitter! Thanks everyone!

cross-posted from: sopuli.xyz/post/48392158

I can’t decide between the SFT-25R and SFT-40 emitters. The price difference between them is negligible, and every online article seems to have differing opinions on which one has more throw, spill, etc.

Also, I am indecisive on the colour temperature. 5000K is daylight coloured apparently, while 6500K is cooler (blue tinted) and 3000K is warmer (yellow tinted, only available for SFT-40). I don’t like cooler lights, so I guess I will probably go with 5000K (unless 3000K isn’t super warm, then maybe that one?)

I am going with the Conway T6 as it’s compatible with regular AA batteries (like my IKEA Laddas), but as I understand, lights with built-in charging functions (e.g. Skilhunt EC150) usually don’t work with NiMH batteries, only Li-ion 14500 batteries.* I don’t think the Conway T6 has that, but I could be wrong. The T6 also cokes in a really unique purple colour!

*small edit: I meant that the charging bits don’t always work for NiMH batteries for most flashlights, the light itself would still work. The wording is a little unclear, sorry about that!

edit 2: I’m purchasing the T6 w/ the SFT-40 3000K emitter! Thanks everyone!

0

Broken battery ):

preview

I have an Acebeam Pokelit 2AA, a brilliant little light, my first true EDC light.

It uses a custom Lithium battery called ARC14100P-160A which has a USB-C charging circuit built into the top of the battery.

This week the battery died, I noted that the light didn’t turn on with the battery, but with 2x 2AA NMIH it works.

When I connect it to charge, the charge LED just lights up green and the battery pulls no current (tested with my USB power meter), I tried to test the voltage of the battery with a multimeter, but it shows as 0 volts.

To me, all of this indicate an issue with the battery’s protection circuit, as I believe even a discharged lithium battery should show some voltage.

Has anyone else seen this issue?

What weirds me out about this is that the charge LED just shows as fully charged when I connect it…

Is it trickle charging at that point, do I plug it in and leave it?

I have an Acebeam Pokelit 2AA, a brilliant little light, my first true EDC light.

It uses a custom Lithium battery called ARC14100P-160A which has a USB-C charging circuit built into the top of the battery.

This week the battery died, I noted that the light didn’t turn on with the battery, but with 2x 2AA NMIH it works.

When I connect it to charge, the charge LED just lights up green and the battery pulls no current (tested with my USB power meter), I tried to test the voltage of the battery with a multimeter, but it shows as 0 volts.

To me, all of this indicate an issue with the battery’s protection circuit, as I believe even a discharged lithium battery should show some voltage.

Has anyone else seen this issue?

What weirds me out about this is that the charge LED just shows as fully charged when I connect it…

Is it trickle charging at that point, do I plug it in and leave it?

0

[Review] Nitecore P27iX – tactical flashlight with great UI and adjustable beam width

preview

Summary

The Nitecore P27iX is a tactical flashlight that impresses with a well-designed user interface and four special “M515S” LEDs. The multi-stage tail buttons provide direct access to four brightness levels, while a sliding switch reliably protects the flashlight against accidental activation. Only the SET button on the head requires some getting used to. Also worth mentioning are the battery level indicators and the USB charging port with its metal flip cover.

The width of the beam can be adjusted in three steps – a useful, though not strictly essential feature. In addition to the four regular brightness levels, there are two particularly bright modes called “Search” and “Lumin Shield”. Some of the button assignments can be customized to suit personal preferences.

A major drawback, in my view, is the proprietary battery. A design that works with standard 21700 cells would have been clearly the better option. The NL2155HPi is not only relatively expensive at over $30, but its long-term availability is also not guaranteed.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Nitecore P27iX is a tactical flashlight that impresses with a well-designed user interface and four special “M515S” LEDs. The multi-stage tail buttons provide direct access to four brightness levels, while a sliding switch reliably protects the flashlight against accidental activation. Only the SET button on the head requires some getting used to. Also worth mentioning are the battery level indicators and the USB charging port with its metal flip cover.

The width of the beam can be adjusted in three steps – a useful, though not strictly essential feature. In addition to the four regular brightness levels, there are two particularly bright modes called “Search” and “Lumin Shield”. Some of the button assignments can be customized to suit personal preferences.

A major drawback, in my view, is the proprietary battery. A design that works with standard 21700 cells would have been clearly the better option. The NL2155HPi is not only relatively expensive at over $30, but its long-term availability is also not guaranteed.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Is there an Anduril headlamp that accepts 18650 button tops?

preview

The only 18650 headlamps that I know of, Hank and Firefly, both require flat tops. Other “enthusiast” headlamps like Skilhunt and Zebralight also require them, though that matters less to me since they’re non-Anduril anyway.

Anyone know what the deal with this is? Is it just lumenitis? It also occurs to me to call that “lumen bloat”, similar to Javascript bloat. I’m an experienced enough user to not care about that any more. I’d rather have fewer lumens and keep the ability to swap 18650’s (including button cells) between my various lights and other devices. For a headlamp I prefer a floody beam since if I want to check out something in the distance, I can pull a handheld thrower from my pocket.

Interchangeable battery tubes (18350/18650) would also be a plus.

Thanks.

The only 18650 headlamps that I know of, Hank and Firefly, both require flat tops. Other “enthusiast” headlamps like Skilhunt and Zebralight also require them, though that matters less to me since they’re non-Anduril anyway.

Anyone know what the deal with this is? Is it just lumenitis? It also occurs to me to call that “lumen bloat”, similar to Javascript bloat. I’m an experienced enough user to not care about that any more. I’d rather have fewer lumens and keep the ability to swap 18650’s (including button cells) between my various lights and other devices. For a headlamp I prefer a floody beam since if I want to check out something in the distance, I can pull a handheld thrower from my pocket.

Interchangeable battery tubes (18350/18650) would also be a plus.

Thanks.

0

Some AA and AAA lights

preview

Left to right: Olight i3e with Glow Rhino Spark locator, Lumintop EDC01, Lumintop EDC15 with Wurkkos HD12 clip, Wurkkos TS10v2, Convoy T3.

Micro-reviews: i3e is nice but too bright (90lm/70 minutes). I’d prefer 30lm/3.5 hours. Skilhunt E3A is same idea, has high CRI led available if purchased direct, but is harder to find at US dealers. It’s possible to change the brightness of both lights by swapping an 0603 sized resistor, i.e. you need SMT rework tools, but some BLF’ers have done it. I’ll want to attempt this if I can get access to the tools sometime. I’ll note that I tried a mostly-depleted alkaleak AAA (1.0V OCV) in the i3e and got no light at all. Some other lights are able to reach lower voltages and still make some light.

Spark locator works but the next bigger size (Ember) should be a lot easier to find in the dark. It does cost 2x more and both are sort of mismatched to these tiny cheap lights.

Lumintop EDC01 is ok, needs a pocket/hat clip. Comes with a GITD diffuser/end cap (not shown) which is kind of nice, and also a split ring / gate clip. Also has a GITD O-ring in the bezel, but that has such short persistence that it’s almost useless. It has mode memory and levels are in H-M-L order. I’d prefer L-M-H and no memory, or maybe even just two levels (20 and 100lm). Beam is floody which I like. Uses one AAA cell, 10440 not allowed. The old Fenix LD01 felt more solid but is long discontinued. I haven’t tried the current E01v2 which has a similar setup to this Lumintop.

Lumintop EDC15 is the lightest weight current production AA light that I know of at 20.5g, and it’s pretty small too. It has 4 levels + strobe, uses AA or 14500, and came with a 14500 with a USB-C charge port, nice. (Product page says micro-USB but must be out of date). It also has mode memory. If up to me I’d give it L-M-H (3 levels), no memory, no strobe. It also came with a diffuser, gate clip, and split ring, but no pocket clip. The Wurkkos HD12 clip fits nicely. I haven’t tried the TS10 clip on it yet.

Wurkkos TS10v2: probably familiar to most of you. I also have the TS10SG and I like the SG a little better, though opinions vary about this. I wish the series hadn’t been discontinued. Note, this light is 14500-only, not dual fuel. The Emisar KR1AA is a few mm longer and dual fuel and I’ll probably get one sometime, though I prefer the TS10SG’s throwier beam.

Convoy T3: Pretty decent for this style of mix and match light. Host looks suspiciously similar to Sofirn SP10 Pro host not in photo. I got it with an 1800K LED which I’m still getting used to. I have the 12 mode group driver that I haven’t yet taken out of the light. It has a reflector which makes a somewhat focused beam that still has good spill. The slightly smaller T5 has an optic that’s more of a flooder. My main wish for these lights is to be able to reprogram the modes since this would be a very good “granny light” if it were only possible to configure it with 1 level of around 50 lumens. It’s rather large for a 1AA/14500 light but that’s fine. There is some work happening on BLF about reprogramming some of the Convoy drivers, which use a Sonix MCU with an 8051-like instruction set. But that will probably come sooner to 18650-powered drivers, plus will require removing the driver and maybe de-soldering an MCU pin, so it’s much nicer to have Anduril and flash pads. On the other hand the Convoy tail clickie switch has positive tactile feel, guarantees zero parasitic current drain, and the lights are much more affordable than a KR1AA.

Left to right: Olight i3e with Glow Rhino Spark locator, Lumintop EDC01, Lumintop EDC15 with Wurkkos HD12 clip, Wurkkos TS10v2, Convoy T3.

Micro-reviews: i3e is nice but too bright (90lm/70 minutes). I’d prefer 30lm/3.5 hours. Skilhunt E3A is same idea, has high CRI led available if purchased direct, but is harder to find at US dealers. It’s possible to change the brightness of both lights by swapping an 0603 sized resistor, i.e. you need SMT rework tools, but some BLF’ers have done it. I’ll want to attempt this if I can get access to the tools sometime. I’ll note that I tried a mostly-depleted alkaleak AAA (1.0V OCV) in the i3e and got no light at all. Some other lights are able to reach lower voltages and still make some light.

Spark locator works but the next bigger size (Ember) should be a lot easier to find in the dark. It does cost 2x more and both are sort of mismatched to these tiny cheap lights.

Lumintop EDC01 is ok, needs a pocket/hat clip. Comes with a GITD diffuser/end cap (not shown) which is kind of nice, and also a split ring / gate clip. Also has a GITD O-ring in the bezel, but that has such short persistence that it’s almost useless. It has mode memory and levels are in H-M-L order. I’d prefer L-M-H and no memory, or maybe even just two levels (20 and 100lm). Beam is floody which I like. Uses one AAA cell, 10440 not allowed. The old Fenix LD01 felt more solid but is long discontinued. I haven’t tried the current E01v2 which has a similar setup to this Lumintop.

Lumintop EDC15 is the lightest weight current production AA light that I know of at 20.5g, and it’s pretty small too. It has 4 levels + strobe, uses AA or 14500, and came with a 14500 with a USB-C charge port, nice. (Product page says micro-USB but must be out of date). It also has mode memory. If up to me I’d give it L-M-H (3 levels), no memory, no strobe. It also came with a diffuser, gate clip, and split ring, but no pocket clip. The Wurkkos HD12 clip fits nicely. I haven’t tried the TS10 clip on it yet.

Wurkkos TS10v2: probably familiar to most of you. I also have the TS10SG and I like the SG a little better, though opinions vary about this. I wish the series hadn’t been discontinued. Note, this light is 14500-only, not dual fuel. The Emisar KR1AA is a few mm longer and dual fuel and I’ll probably get one sometime, though I prefer the TS10SG’s throwier beam.

Convoy T3: Pretty decent for this style of mix and match light. Host looks suspiciously similar to Sofirn SP10 Pro host not in photo. I got it with an 1800K LED which I’m still getting used to. I have the 12 mode group driver that I haven’t yet taken out of the light. It has a reflector which makes a somewhat focused beam that still has good spill. The slightly smaller T5 has an optic that’s more of a flooder. My main wish for these lights is to be able to reprogram the modes since this would be a very good “granny light” if it were only possible to configure it with 1 level of around 50 lumens. It’s rather large for a 1AA/14500 light but that’s fine. There is some work happening on BLF about reprogramming some of the Convoy drivers, which use a Sonix MCU with an 8051-like instruction set. But that will probably come sooner to 18650-powered drivers, plus will require removing the driver and maybe de-soldering an MCU pin, so it’s much nicer to have Anduril and flash pads. On the other hand the Convoy tail clickie switch has positive tactile feel, guarantees zero parasitic current drain, and the lights are much more affordable than a KR1AA.

0

[Review] Armytek Predator Pro Max

preview

Summary

The Armytek Predator Pro Max lives up to its name: compared to its predecessor, it is brighter, has a longer runtime and more throw – all while maintaining nearly the same size. It comes with a new side button, which eliminates the need to loosen or tighten the head to adjust the brightness. Other features like the electronic tail switch and the convenient magnetic charging system are still included.

However, if you don’t want to use the flashlight at full power all the time, it can quickly become a challenge to use: in the dark, the side button for adjusting the brightness is hard to find, as it neither stands out in color nor in shape.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Armytek Predator Pro Max lives up to its name: compared to its predecessor, it is brighter, has a longer runtime and more throw – all while maintaining nearly the same size. It comes with a new side button, which eliminates the need to loosen or tighten the head to adjust the brightness. Other features like the electronic tail switch and the convenient magnetic charging system are still included.

However, if you don’t want to use the flashlight at full power all the time, it can quickly become a challenge to use: in the dark, the side button for adjusting the brightness is hard to find, as it neither stands out in color nor in shape.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Wurkkos TS30S Pro, opinions?

preview

It’s on sale for $60 with SBT90.2 led which is a quite expensive led. I generally prefer small lights but whenever Wurkkos puts an Anduril light on sale, I get FOMO since I think the light is being discontinued.

There’s some discussion here: old.reddit.com/comments/1t5exay

I’m holding off from the partly comparable TS26 because of its driver issues (moon mode probs) and it’s LEDs, though who cares about moon mode in a monster light anyway?

Also, what is so great about the SB90.2 LED? Convoy and Hank charge quite a lot extra for it.

The TS30S blurb claims 295K candela in turbo mode (6K lm) though that seems suspect since 1086m throw is claimed, which would be more like 100k cd.

The Noctigon K1 with same led has comparable throw and output and is of similar size but 2x the price.

In practice idk what I’d do with such a big light. My TS11 probably fulfills my needs for a thrower.

It’s on sale for $60 with SBT90.2 led which is a quite expensive led. I generally prefer small lights but whenever Wurkkos puts an Anduril light on sale, I get FOMO since I think the light is being discontinued.

There’s some discussion here: old.reddit.com/comments/1t5exay

I’m holding off from the partly comparable TS26 because of its driver issues (moon mode probs) and it’s LEDs, though who cares about moon mode in a monster light anyway?

Also, what is so great about the SB90.2 LED? Convoy and Hank charge quite a lot extra for it.

The TS30S blurb claims 295K candela in turbo mode (6K lm) though that seems suspect since 1086m throw is claimed, which would be more like 100k cd.

The Noctigon K1 with same led has comparable throw and output and is of similar size but 2x the price.

In practice idk what I’d do with such a big light. My TS11 probably fulfills my needs for a thrower.

0

[Review] Wuben X1 Pro – high-power flashlight with active cooling that fits into your pocket

preview

Summary

I have not seen more light from a flashlight of this size. Thanks to its flat form factor, the Wuben X1 Pro fits easily into your pocket. With spotlight, floodlight or a combination of both, the light can be adapted to any situation. Active fan cooling allows for longer operation at high brightness. The batteries can either be charged directly in the light via USB-C or quickly replaced if needed.

However, the specified 12300 lm output is not fully achieved and also drops quickly within the first few seconds. After that, 3000 lumens are maintained consistently for about 1.5 hours. With heavy use, the fan could be affected by water and dirt, but it can be replaced relatively easy if needed.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

I have not seen more light from a flashlight of this size. Thanks to its flat form factor, the Wuben X1 Pro fits easily into your pocket. With spotlight, floodlight or a combination of both, the light can be adapted to any situation. Active fan cooling allows for longer operation at high brightness. The batteries can either be charged directly in the light via USB-C or quickly replaced if needed.

However, the specified 12300 lm output is not fully achieved and also drops quickly within the first few seconds. After that, 3000 lumens are maintained consistently for about 1.5 hours. With heavy use, the fan could be affected by water and dirt, but it can be replaced relatively easy if needed.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Cell welder advice?

preview

I’m wondering if there is a decent affordable cell welder. Purpose is rebuilding tool batteries and that sort of thing on an occasional basis. K-weld has been recommended but is pretty expensive and might be overkill. diy500amp.com has a bunch closer to my price range but might be underkill. Any thoughts? Thx

I’m wondering if there is a decent affordable cell welder. Purpose is rebuilding tool batteries and that sort of thing on an occasional basis. K-weld has been recommended but is pretty expensive and might be overkill. diy500amp.com has a bunch closer to my price range but might be underkill. Any thoughts? Thx

0

Mal*Wart 2x2032 27 gram headlamp

preview

I don’t like this retailer but this is a very sparse category (headlamps under 1 ounce) and I happened to be across from one of their stores today, so I picked up 4 of them (two red and two teal). Weight is 27g all up (light, headband, and batteries). The light separates from the backing clip and the light+batteries weigh 18g so the rest is about 9g. It might be possible to golf away a few grams by replacing the headband with some shock cord, but treating 28.35g (1 ounce) as the target weight, this light comfortably hits the target and I can skip further optimization.

Pluses: 1) the light runs on included lithium primary batteries. They won’t leak and have known low temperature performance and long shelf life. 2) Cheap ($1.97 at the store mentioned). The nearest competitor that I know of is $11 (UST Tight Light and harder to find). 3) Very simple UI: press on, press off. No modes. Large, easy to use pushbutton. 4) smooth flood beam, fine for up-close repair work or walking to the loo in the dark. No real throw but this is more like a keychain light than a caving lamp. Maybe a light to stash away in case something happens to both your “real” light and its backup.

Minuses: 1) Large pushbutton might be easy to press by accident. If stashing the light away just in case, I’d leave the protective tab installed in the battery compactment, which also ensures no parasitic battery drain. Then pull the tab out before using the light. But it would be good to have a software timeout or lockout. 2) The headband is too short, maybe intended for kids, or maybe I’m just swell-headed. I can wear it when adjusted to the maximum but it’s tighter than I prefer. I might sew in an extra inch or two of fabric, or replace the headband with shock cord. 3) While it’s very small for a “proper” headlamp, it’s much bigger than a Photonlight or similar. 4) Not that waterproof, particularly because of the slot left unsealed by pulling out the battery tab. Of course you could cover that with a bit of tape, but that could be awkward if you pull out the tab in the field. 5) Need Philips screwdriver (a 4mm driver bit is probably enough) to change batteries.

I think the use of CR2032’s is a win for this light specifically, on the assumption that you’ll use the light only very occasionally or as a backup for a backup, like a Photon light. The stated runtime is 3 hours and I can believe that. Two 2032’s have about as much energy as a charged AAA Eneloop so there’s plenty there. I’d expect a long tapering “tail” as well, but haven’t yet tested. I will do a brightness and runtime test once I get some kind of measurement setup in place.

The 4 leds are SMT with the usual crappy tint. Maybe you could replace them with high CRI leds if you were nerdy about it. Someone actually mentioned that. It might even be possible to replace the 2032’s with a small lipo pouch cell.

Main more serious alternative in the sub-1-oz category that I know of is the Nitecore NU05 v2, which unfortunately has just 1 hour runtime (40 lumen output that can’t be adjusted downward). I haven’t yet gotten to try one of those so can’t compare directly. Maybe soon though. Black Diamond’s 2032 light ($20 iirc) is discontinued and the Petzl e+Lite ($30+) might also be. The Petzl is of far better quality than this thing, but the cost is outlandish unless you’re really trying to prove something.

My main immediate modification will be to staple a piece of Countycomm GITD tape to the headband, as I do with almost all my headlamps, to locate the light in the dark. Put the tape at the “far” end of the headband so you can use the LED’s to charge up the tape. The staple is because the tape’s adhesive isn’t that strong under flexing, and it can fall off if you just stick it onto the headband. You could sew it instead of course.

3.5 stars out of 5 given the niche category and the low price. Main deductions are for the short headband, the waterproofing issue, and the easy accidental activation. This all could have been fixed very easily during design.

I weighed this with a crappy kitchen scale with 1g resolution and poor consistency, but will use a more precise scale when I get a chance.

I don’t like this retailer but this is a very sparse category (headlamps under 1 ounce) and I happened to be across from one of their stores today, so I picked up 4 of them (two red and two teal). Weight is 27g all up (light, headband, and batteries). The light separates from the backing clip and the light+batteries weigh 18g so the rest is about 9g. It might be possible to golf away a few grams by replacing the headband with some shock cord, but treating 28.35g (1 ounce) as the target weight, this light comfortably hits the target and I can skip further optimization.

Pluses: 1) the light runs on included lithium primary batteries. They won’t leak and have known low temperature performance and long shelf life. 2) Cheap ($1.97 at the store mentioned). The nearest competitor that I know of is $11 (UST Tight Light and harder to find). 3) Very simple UI: press on, press off. No modes. Large, easy to use pushbutton. 4) smooth flood beam, fine for up-close repair work or walking to the loo in the dark. No real throw but this is more like a keychain light than a caving lamp. Maybe a light to stash away in case something happens to both your “real” light and its backup.

Minuses: 1) Large pushbutton might be easy to press by accident. If stashing the light away just in case, I’d leave the protective tab installed in the battery compactment, which also ensures no parasitic battery drain. Then pull the tab out before using the light. But it would be good to have a software timeout or lockout. 2) The headband is too short, maybe intended for kids, or maybe I’m just swell-headed. I can wear it when adjusted to the maximum but it’s tighter than I prefer. I might sew in an extra inch or two of fabric, or replace the headband with shock cord. 3) While it’s very small for a “proper” headlamp, it’s much bigger than a Photonlight or similar. 4) Not that waterproof, particularly because of the slot left unsealed by pulling out the battery tab. Of course you could cover that with a bit of tape, but that could be awkward if you pull out the tab in the field. 5) Need Philips screwdriver (a 4mm driver bit is probably enough) to change batteries.

I think the use of CR2032’s is a win for this light specifically, on the assumption that you’ll use the light only very occasionally or as a backup for a backup, like a Photon light. The stated runtime is 3 hours and I can believe that. Two 2032’s have about as much energy as a charged AAA Eneloop so there’s plenty there. I’d expect a long tapering “tail” as well, but haven’t yet tested. I will do a brightness and runtime test once I get some kind of measurement setup in place.

The 4 leds are SMT with the usual crappy tint. Maybe you could replace them with high CRI leds if you were nerdy about it. Someone actually mentioned that. It might even be possible to replace the 2032’s with a small lipo pouch cell.

Main more serious alternative in the sub-1-oz category that I know of is the Nitecore NU05 v2, which unfortunately has just 1 hour runtime (40 lumen output that can’t be adjusted downward). I haven’t yet gotten to try one of those so can’t compare directly. Maybe soon though. Black Diamond’s 2032 light ($20 iirc) is discontinued and the Petzl e+Lite ($30+) might also be. The Petzl is of far better quality than this thing, but the cost is outlandish unless you’re really trying to prove something.

My main immediate modification will be to staple a piece of Countycomm GITD tape to the headband, as I do with almost all my headlamps, to locate the light in the dark. Put the tape at the “far” end of the headband so you can use the LED’s to charge up the tape. The staple is because the tape’s adhesive isn’t that strong under flexing, and it can fall off if you just stick it onto the headband. You could sew it instead of course.

3.5 stars out of 5 given the niche category and the low price. Main deductions are for the short headband, the waterproofing issue, and the easy accidental activation. This all could have been fixed very easily during design.

I weighed this with a crappy kitchen scale with 1g resolution and poor consistency, but will use a more precise scale when I get a chance.

0

Chemical lightstick lumen/runtime test request

preview

I wonder if someone here with suitable test equipment could run a graph on a chemical glowstick, the ordinary 12 hour kind, not a special fancy one. I’m basically hoping for a rough estimate of the lumen output and its decay over time. I did a bit of web search and got drastically varying numbers. I guess I could make an eyeball estimate, but would want to use a reflector of some kind for the ceiling bounce.

Does anyone know if reflectors like the below are still being made? Of course I can DIY one if necessary. Web search didn’t find anything quickly, but it’s difficult to keep the results relevant.

worthpoint.com/…/nos-vintage-glow-stick-lantern-1…

I’m quite dubious of chemical light in this day and age, but they come up in discussions sometimes, so I’m interested in a concrete comparison against flashlights. Thanks!

Added: I’m happy to reimburse the cost of a few glowsticks if you’re up for running this test. Or it’s possible that I could order some and have them sent to you (Home Despot free delivery). PM if you want this.

I wonder if someone here with suitable test equipment could run a graph on a chemical glowstick, the ordinary 12 hour kind, not a special fancy one. I’m basically hoping for a rough estimate of the lumen output and its decay over time. I did a bit of web search and got drastically varying numbers. I guess I could make an eyeball estimate, but would want to use a reflector of some kind for the ceiling bounce.

Does anyone know if reflectors like the below are still being made? Of course I can DIY one if necessary. Web search didn’t find anything quickly, but it’s difficult to keep the results relevant.

worthpoint.com/…/nos-vintage-glow-stick-lantern-1…

I’m quite dubious of chemical light in this day and age, but they come up in discussions sometimes, so I’m interested in a concrete comparison against flashlights. Thanks!

Added: I’m happy to reimburse the cost of a few glowsticks if you’re up for running this test. Or it’s possible that I could order some and have them sent to you (Home Despot free delivery). PM if you want this.

0

[Review] Wurkkos HD02 – a flashlight with wings!

preview

Summary

With the HD02, Wurkkos has once again released a well-designed flashlight. It offers a powerful spotlight, UV light and a green laser. The real highlight, however, are the two fold-out wings, which provide even floodlight illumination with adjustable color temperature.

The user interface is straightforward: unfolding the wings automatically turns on the floodlight. A rotary switch allows easy selection between spotlight, UV light and laser. With the magnet and tripod thread, the flashlight can be mounted in many ways. In an emergency, it can even be used as a power bank via the USB port.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

With the HD02, Wurkkos has once again released a well-designed flashlight. It offers a powerful spotlight, UV light and a green laser. The real highlight, however, are the two fold-out wings, which provide even floodlight illumination with adjustable color temperature.

The user interface is straightforward: unfolding the wings automatically turns on the floodlight. A rotary switch allows easy selection between spotlight, UV light and laser. With the magnet and tripod thread, the flashlight can be mounted in many ways. In an emergency, it can even be used as a power bank via the USB port.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Niteize ZipLit stayed lit 1+ year nonstop, but is now discontinued

preview

Several years back I reviewed this tiny zipper pull light: lemmy.world/post/2163520

I stuck one of them into a mesh pouch where I carry stuff like toothpaste, and more than a year ago (IDK exactly when) it turned on by accident. I left it on to see what would happen. It has stayed lit ever since, though by now the glow level is completely useless for illumination and barely viable as a locator. As someone in Bored Of The Rings said of the parody version of Gandalf’s staff lighting up in Khazad-dûm, it’s about half as bright as a dead firefly. But I can report that with some dark adaptation, I can see it from 5+ feet away (and probably further) in a darkened room. I finally just got around to replacing the battery with one of a pack that I got on ebay (link in the original post).

I also notice that the light itself is discontinued now, oh well. It does seem to me that it turns on by accident too easily. I might stick down the on-off flange with a bit of tape to prevent this.

The original vendor blurb just said 24 hours of light so I might use up a battery to test that, or maybe for a week. It might be ok as a short term alternative to a tritium marker for that much time. I would say in its current state it’s way dimmer than a tritium marker whose tritium isn’t nearly depleted.

It also seems to me that at under 3 grams, this is maybe the most extreme ultralight headlamp out there, if you stick it to your forehead with a piece of tape. It DOES put out enough light to be useful in that setup, for limited notions of “useful”. You can navigate a dark room without bumping into stuff, you can see near-distances enough to change the battery in your main light without having to fumble around by feel, and so on.

Since the light is just a direct drive SMT led and a CR927 cell, it could be that something similar with a CR1616 and a resistor (or go big and use a CR2032) could be used as an H3 substitute that would last for months.

Several years back I reviewed this tiny zipper pull light: lemmy.world/post/2163520

I stuck one of them into a mesh pouch where I carry stuff like toothpaste, and more than a year ago (IDK exactly when) it turned on by accident. I left it on to see what would happen. It has stayed lit ever since, though by now the glow level is completely useless for illumination and barely viable as a locator. As someone in Bored Of The Rings said of the parody version of Gandalf’s staff lighting up in Khazad-dûm, it’s about half as bright as a dead firefly. But I can report that with some dark adaptation, I can see it from 5+ feet away (and probably further) in a darkened room. I finally just got around to replacing the battery with one of a pack that I got on ebay (link in the original post).

I also notice that the light itself is discontinued now, oh well. It does seem to me that it turns on by accident too easily. I might stick down the on-off flange with a bit of tape to prevent this.

The original vendor blurb just said 24 hours of light so I might use up a battery to test that, or maybe for a week. It might be ok as a short term alternative to a tritium marker for that much time. I would say in its current state it’s way dimmer than a tritium marker whose tritium isn’t nearly depleted.

It also seems to me that at under 3 grams, this is maybe the most extreme ultralight headlamp out there, if you stick it to your forehead with a piece of tape. It DOES put out enough light to be useful in that setup, for limited notions of “useful”. You can navigate a dark room without bumping into stuff, you can see near-distances enough to change the battery in your main light without having to fumble around by feel, and so on.

Since the light is just a direct drive SMT led and a CR927 cell, it could be that something similar with a CR1616 and a resistor (or go big and use a CR2032) could be used as an H3 substitute that would last for months.

0

[Review] Vastlite Minima Bow LED

preview

Summary

Apart from the similarity in name, the Vastlite Minima Bow LED has little in common with the earlier Minima Bow featuring a laser light source. In fact, it is a completely new model with conventional LED technology.

The cool-white light shows a pronounced corona around the spot with a yellow-green tint. Operation via the mechanical tail switch is mostly intuitive – if it weren’t for the rather unnecessary blinking modes, which can be easily activated unintentionally.

With a different LED, the Vastlite Minima Bow LED could have been an attractive EDC flashlight: slightly warmer, without the ugly corona, with better color rendering and perhaps a small TIR optic instead of the reflector.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

Apart from the similarity in name, the Vastlite Minima Bow LED has little in common with the earlier Minima Bow featuring a laser light source. In fact, it is a completely new model with conventional LED technology.

The cool-white light shows a pronounced corona around the spot with a yellow-green tint. Operation via the mechanical tail switch is mostly intuitive – if it weren’t for the rather unnecessary blinking modes, which can be easily activated unintentionally.

With a different LED, the Vastlite Minima Bow LED could have been an attractive EDC flashlight: slightly warmer, without the ugly corona, with better color rendering and perhaps a small TIR optic instead of the reflector.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

[Review] Nitecore EDC07 – lightweight EDC flashlight with adjustable color temperature

preview

Summary

The Nitecore EDC07 offers a few interesting surprises: two MCT LEDs with adjustable color temperature produce a pleasant, slightly floody beam. The classic tail-switch operation is easy to understand. Thanks to the plastic body, the flashlight is remarkably light at just 70 g. However, with the plastic feel, it takes some time before you will appreciate the build quality. The strobe mode is well hidden, severely limiting its practical use.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

The Nitecore EDC07 offers a few interesting surprises: two MCT LEDs with adjustable color temperature produce a pleasant, slightly floody beam. The classic tail-switch operation is easy to understand. Thanks to the plastic body, the flashlight is remarkably light at just 70 g. However, with the plastic feel, it takes some time before you will appreciate the build quality. The strobe mode is well hidden, severely limiting its practical use.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

NanoLEDs Push the Boundaries of Display Technology

IEEE Spectrum NanoLEDs Push the Boundaries of Display Technology spectrum.ieee.org
preview

They are making LEDs less than 100nm across, for use in ultra high dpi displays. That’s way smaller than the wavelength of light that they emit!

They are making LEDs less than 100nm across, for use in ultra high dpi displays. That’s way smaller than the wavelength of light that they emit!

0

LED lighting (350-650nm) undermines human visual performance unless supplemented by wider spectra (400-1500nm+) like daylight

Nature LED lighting (350-650nm) undermines human visual performance unless supplemented by wider spectra (400-1500nm+) like daylight - Scientific Reports www.nature.com
preview

Abstract: Life evolved under broad spectrum sunlight, from ultraviolet to infrared (300–2500 nm). This spectrally balanced light sculpted life’s physiology and metabolism. But modern lighting has recently become dominated by restricted spectrum light emitting diodes (350–650 nm LEDs). Absence of longer wavelengths in LEDs and their short wavelength dominance impacts physiology, undermining normal mitochondrial respiration that regulates metabolism, disease and ageing. Mitochondria are light sensitive. The 420–450 nm dominant in LEDs suppresses respiration while deep red/infrared (670–900 nm) increases respiration in aging and some diseases including in blood sugar regulation. Here we supplement LED light with broad spectrum lighting (400–1500 nm+) for 2 weeks and test colour contrast sensitivity. We show significant improvement in this metric that last for 2 months after the supplemental lighting is removed. Mitochondria communicate across the body with systemic impacts following regional light exposure. This likely involves shifting patterns of serum cytokine expression, raising the possibility of wider negative impacts of LEDs on human health particularly, in the elderly or in the clinical environment where individuals are debilitated. Changing the lighting in these environments could be a highly economic route to improved public health.

Abstract: Life evolved under broad spectrum sunlight, from ultraviolet to infrared (300–2500 nm). This spectrally balanced light sculpted life’s physiology and metabolism. But modern lighting has recently become dominated by restricted spectrum light emitting diodes (350–650 nm LEDs). Absence of longer wavelengths in LEDs and their short wavelength dominance impacts physiology, undermining normal mitochondrial respiration that regulates metabolism, disease and ageing. Mitochondria are light sensitive. The 420–450 nm dominant in LEDs suppresses respiration while deep red/infrared (670–900 nm) increases respiration in aging and some diseases including in blood sugar regulation. Here we supplement LED light with broad spectrum lighting (400–1500 nm+) for 2 weeks and test colour contrast sensitivity. We show significant improvement in this metric that last for 2 months after the supplemental lighting is removed. Mitochondria communicate across the body with systemic impacts following regional light exposure. This likely involves shifting patterns of serum cytokine expression, raising the possibility of wider negative impacts of LEDs on human health particularly, in the elderly or in the clinical environment where individuals are debilitated. Changing the lighting in these environments could be a highly economic route to improved public health.

0

Wurkkos releases new Anduril TS26, 21700 powered, USB-C, reverse charging, IPX8, 3400lm, RGB aux leds, $40 US

preview

Matthew Lee of Wurkkos mentioned this to me by email last week and it’s on the site now. I’m glad that Wurkkos is continuing to make Anduril lights since I thought they had given up on them.

This seems to be an Anduril version of the existing non-Anduril TS26S. It has a boost driver, flashing pads, and reverse charging which is handy in larger lights like this. Supposedly runs 520 hours in 1 lumen low mode. Come to think of it, that is fairly inefficient. Some energy might be getting lost in the boost converter at very low current. Anyway, it’s ok, 520 hours is a lot, and most of us don’t buy flashlights this large to run them at 1 lumen. It also says 135 hours at 15 lumens, which is much better in terms of efficiency. And it claims 2 hour charge time, pretty good for a 5000mah 21700 light. That means charging at 2.5 or maybe 3 amps.

Weight and dimensions are in tiny print on page 2 of the pdf manual: 122mm long, 35mm diameter, 175g including battery. It has an interesting swirl pattern machined into the battery tube and it generally looks nice.

Launch date mentioned is 1/13 (tomorrow) so right now they aren’t taking orders, but maybe by the time you read this they will.

I don’t feel likely to order right away since I generally prefer smaller lights, and I just got the TS11 for when I want a thrower. But, this certainly fills a popular niche and it looks like a good implementation.

Matthew Lee of Wurkkos mentioned this to me by email last week and it’s on the site now. I’m glad that Wurkkos is continuing to make Anduril lights since I thought they had given up on them.

This seems to be an Anduril version of the existing non-Anduril TS26S. It has a boost driver, flashing pads, and reverse charging which is handy in larger lights like this. Supposedly runs 520 hours in 1 lumen low mode. Come to think of it, that is fairly inefficient. Some energy might be getting lost in the boost converter at very low current. Anyway, it’s ok, 520 hours is a lot, and most of us don’t buy flashlights this large to run them at 1 lumen. It also says 135 hours at 15 lumens, which is much better in terms of efficiency. And it claims 2 hour charge time, pretty good for a 5000mah 21700 light. That means charging at 2.5 or maybe 3 amps.

Weight and dimensions are in tiny print on page 2 of the pdf manual: 122mm long, 35mm diameter, 175g including battery. It has an interesting swirl pattern machined into the battery tube and it generally looks nice.

Launch date mentioned is 1/13 (tomorrow) so right now they aren’t taking orders, but maybe by the time you read this they will.

I don’t feel likely to order right away since I generally prefer smaller lights, and I just got the TS11 for when I want a thrower. But, this certainly fills a popular niche and it looks like a good implementation.

0

[Review] Wurkkos HD03 – compact clip flashlight with spot and flood beam

preview

Summary

Clips are a common feature on flashlights. They make it easy to attach the flashlight to a pocket or a belt. In some cases, the clip can also be useful during operation, allowing you to keep your hands free. And on some models, the clip is even an integral part of the design.

The Wurkkos HD03 is such a clip flashlight. It features three channels for a spot light, flood light and colorful RGB lighting. With its clip and the integrated magnet, it can be mounted in many ways.

The full review is available here:

English review at BudgetLightForum
German review on my website

Summary

Clips are a common feature on flashlights. They make it easy to attach the flashlight to a pocket or a belt. In some cases, the clip can also be useful during operation, allowing you to keep your hands free. And on some models, the clip is even an integral part of the design.

The Wurkkos HD03 is such a clip flashlight. It features three channels for a spot light, flood light and colorful RGB lighting. With its clip and the integrated magnet, it can be mounted in many ways.

The full review is available here:

English review at BudgetLightForum
German review on my website

0

Did Nitecore refresh the HA11? It now has a solid headband and can use 3.6v rechargeable lithium cell

NITECORE NITECORE HA11 Multipurpose Ultra Lightweight AA Headlamp flashlight.nitecore.com
preview

For those not familiar, the HA11 is a small Nitecore headlamp that uses AA-sized batteries, reviewed in detail by Parametrek here:

parametrek.com/blog/ha11.html

The reviewed version (the same one I have) had a shock cord headband, and I’m pretty sure it couldn’t run on 3.6v, or at least wasn’t advertised that way. So I only run it on Eneloops and L91 non-rechargeable lithium. Being able to run on 14500 is a new upgrade. I don’t know if I like the new headband but it’s interesting. Also, I think they have reprogrammed the brightness settings somewhat.

If anyone is in contact with Parametrek, can they let him know about this? I don’t post on Reddit these days. Thanks.

For those not familiar, the HA11 is a small Nitecore headlamp that uses AA-sized batteries, reviewed in detail by Parametrek here:

parametrek.com/blog/ha11.html

The reviewed version (the same one I have) had a shock cord headband, and I’m pretty sure it couldn’t run on 3.6v, or at least wasn’t advertised that way. So I only run it on Eneloops and L91 non-rechargeable lithium. Being able to run on 14500 is a new upgrade. I don’t know if I like the new headband but it’s interesting. Also, I think they have reprogrammed the brightness settings somewhat.

If anyone is in contact with Parametrek, can they let him know about this? I don’t post on Reddit these days. Thanks.

0

Harbor Freight "keychain" led / headlamp mod host

preview

This is a 2x CR2032 magnet light that HF has had on sale for $1 a bunch of times. I missed the sale, so splurged on one at the full retail price of $1.79, still not too bad, as I figured that at worst I could use the pair of 2032’s. But my more interesting idea was adding a minimal headband and using it as a cheap lightweight headlamp. I think this is a borderline practical idea, but overall, meh.

Weight of this light is 28g of which a few grams is probably the magnet on the back. The magnet looks like it could be pried out easily. The beam is a wide and even flood, good for close-up illumination but probably useless for distance. Stated output is 30lm and I guess I can believe that, at least with fresh batteries. Two 2032 at 200mah each is 1.2WH which is comparable to a single AAA cell. UI is crap: press button for high, press again for low, once more for flashing, then finally off. You must cycle through all the modes to turn it off. Low is visible PWM but I’m not too bothered by that. Light source is 6 tiny leds on a COB strip.

The light is bulbous and bulkier than I’d prefer, but fine. Width is about 88mm not counting the keychain post, height 34mm, thickness 24mm. The battery cover is on the back, a circular plug with a coin slot. The light itself is in a shell of two halves that I guess are welded together. It might be possible to split the halves, then stick them back together with super glue or similar, but I haven’t tried this yet. It might alternatively be possible to drill holes in the ends and thread some shock cord through the light without doing that disassembly. I might pop this light open to photograph the internals in order to check this possibility.

Anyway, another day, another crappy light. As a random utility light to toss in Mom’s kitchen drawer in case of a power outage, it’s nice because the lithium batteries have very long shelf life and are unlikely to corrode like alkalines. It’s basically a smaller version of the 3AAA magnet light that HF used to regularly give away for free with a purchase, but which the now sell for a few bucks.

My rating: given what it is, 3 stars / 5.

This is a 2x CR2032 magnet light that HF has had on sale for $1 a bunch of times. I missed the sale, so splurged on one at the full retail price of $1.79, still not too bad, as I figured that at worst I could use the pair of 2032’s. But my more interesting idea was adding a minimal headband and using it as a cheap lightweight headlamp. I think this is a borderline practical idea, but overall, meh.

Weight of this light is 28g of which a few grams is probably the magnet on the back. The magnet looks like it could be pried out easily. The beam is a wide and even flood, good for close-up illumination but probably useless for distance. Stated output is 30lm and I guess I can believe that, at least with fresh batteries. Two 2032 at 200mah each is 1.2WH which is comparable to a single AAA cell. UI is crap: press button for high, press again for low, once more for flashing, then finally off. You must cycle through all the modes to turn it off. Low is visible PWM but I’m not too bothered by that. Light source is 6 tiny leds on a COB strip.

The light is bulbous and bulkier than I’d prefer, but fine. Width is about 88mm not counting the keychain post, height 34mm, thickness 24mm. The battery cover is on the back, a circular plug with a coin slot. The light itself is in a shell of two halves that I guess are welded together. It might be possible to split the halves, then stick them back together with super glue or similar, but I haven’t tried this yet. It might alternatively be possible to drill holes in the ends and thread some shock cord through the light without doing that disassembly. I might pop this light open to photograph the internals in order to check this possibility.

Anyway, another day, another crappy light. As a random utility light to toss in Mom’s kitchen drawer in case of a power outage, it’s nice because the lithium batteries have very long shelf life and are unlikely to corrode like alkalines. It’s basically a smaller version of the 3AAA magnet light that HF used to regularly give away for free with a purchase, but which the now sell for a few bucks.

My rating: given what it is, 3 stars / 5.