0

[Mod Post] Looking for Moderators and Community Transfer

preview

Not going to be able to mod as much nowadays, and the two Switch communities need it the most especially when this one only has one mod now.

I’m looking for moderators who have an understanding of the rules and is active enough to properly moderate as needed. Having some experience isn’t mandatory but will help a good deal. If anyone wants to take over then I can transfer communities and go from there. Switch pages are risky enough that I consider taking the pages down as a precaution, but I’ll see what everyone thinks first.

Not going to be able to mod as much nowadays, and the two Switch communities need it the most especially when this one only has one mod now.

I’m looking for moderators who have an understanding of the rules and is active enough to properly moderate as needed. Having some experience isn’t mandatory but will help a good deal. If anyone wants to take over then I can transfer communities and go from there. Switch pages are risky enough that I consider taking the pages down as a precaution, but I’ll see what everyone thinks first.

0

Is there really no way to homebrew a Mariko Switch without soldering?

preview

I don’t have any kind of experience with electronics, I’m extremely afraid to fuck up anything with my Switch BUT I want the free games. 😭 How come there is no way to exploit the software like it happened with V1? Isn’t the modding community invested in claiming another console? Or is the thing that really tough to homebrew without the hardware modding?

I don’t have any kind of experience with electronics, I’m extremely afraid to fuck up anything with my Switch BUT I want the free games. 😭 How come there is no way to exploit the software like it happened with V1? Isn’t the modding community invested in claiming another console? Or is the thing that really tough to homebrew without the hardware modding?

0

Switch 2 jailbreak "ns2jb" released. Software-only exploit, tethered

GBAtemp.net - The Independent Video Game Community Switch 2 jailbreak "ns2jb" released. Software-only exploit, tethered gbatemp.net
preview

Game might not be required (sorry for Xitter link): x.com/gezine_dev/status/2113226316623552651

"Smallbasic4 is not strictly needed. So I wouldn’t update to latest firmware to get that "

Game might not be required (sorry for Xitter link): x.com/gezine_dev/status/2113226316623552651

"Smallbasic4 is not strictly needed. So I wouldn’t update to latest firmware to get that "

0

Missing game data detected on banned switch

preview

My switch was recently banned, which isn’t an issue for me since I don’t play online, however something happened where my physical copy of pokemon violet was either corrupted due to a console update or the game was mid update and my switch reset itself.

When I try to open the game it tells me to connect to the internet to verify the game files for missing data. Since my switch is banned I am unable to connect to the internet in the first place. My question is how would I go about fixing this issue, assuming the game card or save file is affected.

My switch was recently banned, which isn’t an issue for me since I don’t play online, however something happened where my physical copy of pokemon violet was either corrupted due to a console update or the game was mid update and my switch reset itself.

When I try to open the game it tells me to connect to the internet to verify the game files for missing data. Since my switch is banned I am unable to connect to the internet in the first place. My question is how would I go about fixing this issue, assuming the game card or save file is affected.

0

Solder won't melt

preview

I’m trying to solder on the flex cable for a PicoFly. I’ve added some solder to the bottom two points that are touching the metal surrounding the CPU. However, I seem to only be making a bigger and bigger ball of solder when trying to melt it. I’ve upped the temperature on my iron but that doesn’t seem to be doing anything. What am I doing wrong?

I’m trying to solder on the flex cable for a PicoFly. I’ve added some solder to the bottom two points that are touching the metal surrounding the CPU. However, I seem to only be making a bigger and bigger ball of solder when trying to melt it. I’ve upped the temperature on my iron but that doesn’t seem to be doing anything. What am I doing wrong?

0

ACNH - BCAT injections still needed?

preview

There’s almost zero proper documentation on BCAT stuff but does it still need to be done in 2024 for the latest 2.0.6 update?

From my own testing, a handful of date events seem to be working just fine as long as in game prerequisites are met. There are a LOT of events once tied to BCAT files though, so I can’t really check all of em.

One other point to note - in videos of players using legit switches and copies of the game, the version still seems to be 2.0.6 without a letter (and 🏠 for HHA DLC)

There’s almost zero proper documentation on BCAT stuff but does it still need to be done in 2024 for the latest 2.0.6 update?

From my own testing, a handful of date events seem to be working just fine as long as in game prerequisites are met. There are a LOT of events once tied to BCAT files though, so I can’t really check all of em.

One other point to note - in videos of players using legit switches and copies of the game, the version still seems to be 2.0.6 without a letter (and 🏠 for HHA DLC)

0

Help with homebrewing?

preview

Hi, Im new here, and ive wanted to start modding my switch and my 3ds. the 3ds is simple enough, however i have no experience with soldering or hardware knowhow, so i was wondering if there was any way i could pay someone to mod my switch for me?

Hi, Im new here, and ive wanted to start modding my switch and my 3ds. the 3ds is simple enough, however i have no experience with soldering or hardware knowhow, so i was wondering if there was any way i could pay someone to mod my switch for me?

0

Error when installing NSPs

preview

Error: 2145-0001 (0x291) when installing Mario Kart 8 Deluxe NSP (or any game for that matter) I am certain I have installed sigpatches. Atmosphere 1.8.0, on firmware 19.0.1. I had no problems on 19.0.0. What could be wrong?

Error: 2145-0001 (0x291) when installing Mario Kart 8 Deluxe NSP (or any game for that matter) I am certain I have installed sigpatches. Atmosphere 1.8.0, on firmware 19.0.1. I had no problems on 19.0.0. What could be wrong?

0

Absolute noob needs advice

preview

So, since very recently Nintendo decided to be a fuck and kill all emulator projects for the Switch, I finally decided to grab them and learn how to use them. I’m very much not new to emulation in general and where to find games, so I’m mostly good with that. Only thing is that I couldn’t get the new Zelda game to run without stutters, but I guess that’s the shaders compiling in real time. Unicorn Overlord plays absolutely flawlessly.

Anyway, I would like to go after more games, but all of the different file formats confuse me. Specifically, the NSZ format. None of my emulators are able of loading that, my other games are in NSP format and load just fine.

Okay, also. I own a 2019 model Switch Lite and would like to know how would I go about unlocking it. I guess I would need to install a modchip on it?

So, since very recently Nintendo decided to be a fuck and kill all emulator projects for the Switch, I finally decided to grab them and learn how to use them. I’m very much not new to emulation in general and where to find games, so I’m mostly good with that. Only thing is that I couldn’t get the new Zelda game to run without stutters, but I guess that’s the shaders compiling in real time. Unicorn Overlord plays absolutely flawlessly.

Anyway, I would like to go after more games, but all of the different file formats confuse me. Specifically, the NSZ format. None of my emulators are able of loading that, my other games are in NSP format and load just fine.

Okay, also. I own a 2019 model Switch Lite and would like to know how would I go about unlocking it. I guess I would need to install a modchip on it?

0

Titz pro host details?

preview

Hi all, I have been a member of titz pro for a long time, but not been active on my switch for quite a while. Just booted it up and checked tinfoil and I’m not getting a success message from titz pro anymore. I’m wondering if there is a new host that someone can share or point me in the direct of it?

Hi all, I have been a member of titz pro for a long time, but not been active on my switch for quite a while. Just booted it up and checked tinfoil and I’m not getting a success message from titz pro anymore. I’m wondering if there is a new host that someone can share or point me in the direct of it?

0

Game storage? Separate NSP files or B+?

preview

I’m looking to back up all my switch games using DBI MTP responder. In the installed games partition there is the folder containing the base, updates, and dic as separate files. Also in this folder is a single nsp b+ file containing base, updates, and dic. Which is better for external storage incase I need them? Also if I go with the b+ version and a new update or dlo comes out down the line. Will I be locked into what that one file contains only and can’t be updated?

Thanks

I’m looking to back up all my switch games using DBI MTP responder. In the installed games partition there is the folder containing the base, updates, and dic as separate files. Also in this folder is a single nsp b+ file containing base, updates, and dic. Which is better for external storage incase I need them? Also if I go with the b+ version and a new update or dlo comes out down the line. Will I be locked into what that one file contains only and can’t be updated?

Thanks

0

Do you think switch hacking will become safer in the future?

preview

We all know the 3ds is comically easy to hack, do you think the switch will reach that level of ease?

I have a v1 I might mod after eol

We all know the 3ds is comically easy to hack, do you think the switch will reach that level of ease?

I have a v1 I might mod after eol

0

Atmosphere 1.7.0 is in Pre-release, fixes for Switch FW 18.0.0

GitHub Releases · Atmosphere-NX/Atmosphere github.com
preview

Interestingly the release notes include this section:

fusee no longer supports applying IPS patches to KIPs.

Followed up by:

The IPS subsystem was originally designed to make nogc patches work for FS, but these are now internal, and it appears the literal only kip patches that exist are for piracy.

Does this indicate Atmosphere is going to become more hostile for any form of piracy?

Interestingly the release notes include this section:

fusee no longer supports applying IPS patches to KIPs.

Followed up by:

The IPS subsystem was originally designed to make nogc patches work for FS, but these are now internal, and it appears the literal only kip patches that exist are for piracy.

Does this indicate Atmosphere is going to become more hostile for any form of piracy?

0

All in one pack and themes for CFW Switch / Atmosphere

preview

Hi all, I just finished making a newb friendly guide for CFW Switch. You can find it here Rentry.co/SwitchCFW I also made custom NRO forwarders for HBmenu, Haze, Tinwoo, Tinfoil and RetroArch.

Let me know what you think and what I should add next!

Hi all, I just finished making a newb friendly guide for CFW Switch. You can find it here Rentry.co/SwitchCFW I also made custom NRO forwarders for HBmenu, Haze, Tinwoo, Tinfoil and RetroArch.

Let me know what you think and what I should add next!

0

[Pico 2040 from Ali] Cannot boot OFW from eMMC, emuNAND works fine

preview

Hello,

I have installed a Pico 2040 on my V1 patched Switch yesterday. It’s an “easy install” hwfly pico clone with the CPU flex cable.

I copied my sysNAND to the SD card and I’ve had a warning saying that there may be memory issues wih the eMMC. I booted emuNAND from SD card and it works fine.

My issue is that I cannot boot Original firmware from eMMC chip. I tried the “Reboot to OFW” option in Hekate and I also tried to boot holding vol+, vol-, clicking power and releasing volume buttons once Nintendo logo appears. The screen is always stuck on the “Nintendo SWITCH” logo.

I tried to boot holding the RESET button of the modchip while booting but I’ve had the same results. So I guess I can deduce it is not a firmware issue. To troubleshoot the issue, I disconnected the modchip to connect the eMMC chip directly to the console and the original system firmawre does boot ! I guess I can deduce I did not cause any damage during installation.

I sent a message to the seller, maybe they can send me a new chip. Did anyone have a similar experience and was able to resolve it ?

Here’s a picture during the installation. I have put Kapton tape on the CPU capacitors and around the modchip after I’ve taken the picture.

Thank you

Hello,

I have installed a Pico 2040 on my V1 patched Switch yesterday. It’s an “easy install” hwfly pico clone with the CPU flex cable.

I copied my sysNAND to the SD card and I’ve had a warning saying that there may be memory issues wih the eMMC. I booted emuNAND from SD card and it works fine.

My issue is that I cannot boot Original firmware from eMMC chip. I tried the “Reboot to OFW” option in Hekate and I also tried to boot holding vol+, vol-, clicking power and releasing volume buttons once Nintendo logo appears. The screen is always stuck on the “Nintendo SWITCH” logo.

I tried to boot holding the RESET button of the modchip while booting but I’ve had the same results. So I guess I can deduce it is not a firmware issue. To troubleshoot the issue, I disconnected the modchip to connect the eMMC chip directly to the console and the original system firmawre does boot ! I guess I can deduce I did not cause any damage during installation.

I sent a message to the seller, maybe they can send me a new chip. Did anyone have a similar experience and was able to resolve it ?

Here’s a picture during the installation. I have put Kapton tape on the CPU capacitors and around the modchip after I’ve taken the picture.

Thank you

0

How to move NSP files to SD card from Mac?

preview

I thought it would be as easy as plugging the Switch Lite or SD card into the Mac and moving the NSP files over into a folder. I have no idea what I’m doing obviously.

Edit: I attempted to transfer files over from my Mac using Android File Transfer and DB Installer. It looked very promising but AFT closes and reopens over and over again.

I thought it would be as easy as plugging the Switch Lite or SD card into the Mac and moving the NSP files over into a folder. I have no idea what I’m doing obviously.

Edit: I attempted to transfer files over from my Mac using Android File Transfer and DB Installer. It looked very promising but AFT closes and reopens over and over again.

0

NSP vs XCI files? Which do you prefer?

preview

Recently got into the homebrew scene for switch. Migrating over from the 3ds. I plan on going the DDL route with jdownloader2 (unless someone has a better idea and can share lol). NSP vs XCI for base game files? What are the pros and cons of each? What do you use? I don’t plan on doing any online play or ever using stock FW ever again if that changes anything. Thanks.

Recently got into the homebrew scene for switch. Migrating over from the 3ds. I plan on going the DDL route with jdownloader2 (unless someone has a better idea and can share lol). NSP vs XCI for base game files? What are the pros and cons of each? What do you use? I don’t plan on doing any online play or ever using stock FW ever again if that changes anything. Thanks.

0

How easy to pirate and play Civilization VI

preview

Hello, i’m a simple man, i enjoy playing only a few games, and one of them is civlization

I want to get a fixable* switch, fix* it as hard as possible to be able to play Civilization VI (and maybe skyrim?)

My questions are:

  • Will i face any issues in particular about this game?

  • how long would the battery last

  • performance?

*(Fixable/fix, because all the switches are broken, they don’t allow you to pirate out of the box😂)

Hello, i’m a simple man, i enjoy playing only a few games, and one of them is civlization

I want to get a fixable* switch, fix* it as hard as possible to be able to play Civilization VI (and maybe skyrim?)

My questions are:

  • Will i face any issues in particular about this game?

  • how long would the battery last

  • performance?

*(Fixable/fix, because all the switches are broken, they don’t allow you to pirate out of the box😂)

0

Tits Pro/Bro

preview

Hello All,

Could anyone point me in the direction of where the Tits Pro/Bro discord moved to?

A couple of months ago I stupidly deleted one of my server entries in Tinfoil, this was finally recovered yesterday thanks to a kind reddit user, but now i’m getting the message that my key isn’t in their database any longer?

Hello All,

Could anyone point me in the direction of where the Tits Pro/Bro discord moved to?

A couple of months ago I stupidly deleted one of my server entries in Tinfoil, this was finally recovered yesterday thanks to a kind reddit user, but now i’m getting the message that my key isn’t in their database any longer?

0

Create my own private eshop

Create my own private eshop - Lemmy.World lemmy.world
preview

Hi, I have access to a paid shop but have 2 Nintendos. This shop decided after a while that the “licenses” changed from being able to use on 2 devices to just 1.

Now it’s hard to keep mine and my SO’s Nintendos games on the same version…

I was wondering if I could host them on my pc somehow and create an eshops connection just like a normal shop. Then I could download the games from the paid shop, somehow pull them from the switch to the server and there it is. The other switch just has to connect and update.

Is something like this possible? (sorry if the text is all over the place, it’s late and I ran out of ADHD meds 🙃. Hope you were still able to decipher what I meant)

Hi, I have access to a paid shop but have 2 Nintendos. This shop decided after a while that the “licenses” changed from being able to use on 2 devices to just 1.

Now it’s hard to keep mine and my SO’s Nintendos games on the same version…

I was wondering if I could host them on my pc somehow and create an eshops connection just like a normal shop. Then I could download the games from the paid shop, somehow pull them from the switch to the server and there it is. The other switch just has to connect and update.

Is something like this possible? (sorry if the text is all over the place, it’s late and I ran out of ADHD meds 🙃. Hope you were still able to decipher what I meant)

0

Bigger SD card, not enough storage

preview

Greetings fellow Switchers!

I have obtained a bigger SD card for my switch but I didn’t not have enough space on my laptop to copy all the files from the old card. Is it possible if I connect both cards to the laptop and copy/paste everything to the new card?

Is it possible to copy only those files that are necessary to start the switch with the new card?

Thank you in advance!

Edit: I have file based emummc and not partitioned.

Greetings fellow Switchers!

I have obtained a bigger SD card for my switch but I didn’t not have enough space on my laptop to copy all the files from the old card. Is it possible if I connect both cards to the laptop and copy/paste everything to the new card?

Is it possible to copy only those files that are necessary to start the switch with the new card?

Thank you in advance!

Edit: I have file based emummc and not partitioned.

0

Sdcard update on Oled with modchip

preview

I want to upgrade my SD card from 256gb to 512gb.

Will a simple copy and paste do the trick?

If you know a reliable guide please share it .

Thank you in advance.

I want to upgrade my SD card from 256gb to 512gb.

Will a simple copy and paste do the trick?

If you know a reliable guide please share it .

Thank you in advance.

0

OK mateys, let's talk about direct links.

preview

cross-posted from: lemmy.dbzer0.com/post/18438

The original /r/piracy was purposefully gimped because Reddit received DMCAs for any random thing and didn’t even bother to follow up. Since we’re in new waters, I want things to be a bit more relaxed, but there’s a limit on how relaxed we can be, without starting to get lawsuits, which I will not be able to fight off. I also host other communities and interests which might cause me headaches.

Remember, this is a hobby project (and none of you scurvy dogs are donating) :D

So here are some piracy-related ground rules for he whole of lemmy.dbzer0.com as of today

  1. No direct links. This means anything which would make Nintendo or Disney light my ass on fire. I am not going to ban you for it (unless you start doing this on purpose), but I will ask admins and mods to remove them.
  2. You can link to websites pages related to piracy. Linking to websites linking to your content (not with a 301 redirect, before you ask) is OK. In general try to keep one degree of separation between our collective groins and your links.
  3. Magnet Links and links to Torrent files are OK, unless we start getting into trouble for it.
  4. /c/piracy has its own, more restrictive rules. Follow them first when they differ from what I post here! /c/piracy is for generic discussion, I don’t want it to turn into a link repository full of beggars, got it?
  5. These rules apply to all pirate communities in lemmy.dbzer0.com. Unless that community has more restrictive rules from its own mods. I can easily get a lawsuit because you start making a nintendo ROM link repository.
  6. You can still post direct links elsewhere: If you want a place to post direct links, I suggest you use a community on a server setup to handle this. This requires some significant investment in anonymity and hosting provider (these providers are 3x as expensive, yo!). You can still subscribe and share from those communities with your account in lemmy.dbzer0.com, which can serve as your “port of safety” as those lemmies could be taken down due to those links. If that happens, this safer community will still be up.

All in all, this lemmy is supposed to be Pirate-allied, but not a direct link repository. I literally cannot handle that legal risk at the moment. I hope you all understand the realities of our situation. As much as we can argue that a link to a file is not infringing, the Cartel’s legal fund is bottomless, and all I have is a tinsy-tiny treasure chest under my birdbath.

If any pirate communites need to migrate after this, I understand. I would still suggest you keep them around as the “safe” community, and post your link aggregation on a lemmy instance which can handle the eye of sauron. This way you get both a stable community and account, and your links via fediverse. Win-win.

cross-posted from: lemmy.dbzer0.com/post/18438

The original /r/piracy was purposefully gimped because Reddit received DMCAs for any random thing and didn’t even bother to follow up. Since we’re in new waters, I want things to be a bit more relaxed, but there’s a limit on how relaxed we can be, without starting to get lawsuits, which I will not be able to fight off. I also host other communities and interests which might cause me headaches.

Remember, this is a hobby project (and none of you scurvy dogs are donating) :D

So here are some piracy-related ground rules for he whole of lemmy.dbzer0.com as of today

  1. No direct links. This means anything which would make Nintendo or Disney light my ass on fire. I am not going to ban you for it (unless you start doing this on purpose), but I will ask admins and mods to remove them.
  2. You can link to websites pages related to piracy. Linking to websites linking to your content (not with a 301 redirect, before you ask) is OK. In general try to keep one degree of separation between our collective groins and your links.
  3. Magnet Links and links to Torrent files are OK, unless we start getting into trouble for it.
  4. /c/piracy has its own, more restrictive rules. Follow them first when they differ from what I post here! /c/piracy is for generic discussion, I don’t want it to turn into a link repository full of beggars, got it?
  5. These rules apply to all pirate communities in lemmy.dbzer0.com. Unless that community has more restrictive rules from its own mods. I can easily get a lawsuit because you start making a nintendo ROM link repository.
  6. You can still post direct links elsewhere: If you want a place to post direct links, I suggest you use a community on a server setup to handle this. This requires some significant investment in anonymity and hosting provider (these providers are 3x as expensive, yo!). You can still subscribe and share from those communities with your account in lemmy.dbzer0.com, which can serve as your “port of safety” as those lemmies could be taken down due to those links. If that happens, this safer community will still be up.

All in all, this lemmy is supposed to be Pirate-allied, but not a direct link repository. I literally cannot handle that legal risk at the moment. I hope you all understand the realities of our situation. As much as we can argue that a link to a file is not infringing, the Cartel’s legal fund is bottomless, and all I have is a tinsy-tiny treasure chest under my birdbath.

If any pirate communites need to migrate after this, I understand. I would still suggest you keep them around as the “safe” community, and post your link aggregation on a lemmy instance which can handle the eye of sauron. This way you get both a stable community and account, and your links via fediverse. Win-win.