@mxdcodes@lemmy.world
member since 12 Apr 2026 08:01
comments
- on Hosting external services in c/selfhosted@lemmy.world · 12 Sep 2026
-
on Dawarich 1.14.1 - now rendering millions of points in seconds! in c/selfhosted@lemmy.world · 5 Sep 2026
There is a toggle next to it which enables it. A rework for the UI is already on the roadmap :D
-
on Dawarich 1.14.1 - now rendering millions of points in seconds! in c/selfhosted@lemmy.world · 5 Sep 2026
Sorry, should have mentioned it when i refer to it. In “Settings > Tracking & Sync > Advanced Settings” See also colota.app/docs/configuration/gps-settings
-
on Dawarich: 10 years of recorded tracks and now they have a purpose in c/selfhosted@lemmy.world · 2 Sep 2026
A profile with “speed above 10 km/h” will kick in when the last 5 points average speed is above 10 km/h. The notification banner and dashboard will tell you if the profile is actually active.
If your interval for that profile is 5s, a new point will be requested every 5 seconds and with a 10m movement threshold every point closer than 10m to the last recorded point gets discarded.
So to get smoother tracks you can decrease the movement threshold. Personally I use a movement threshold of 2m with a tracking interval of 6 seconds which works very well for me.
Logging points every 10m without a time interval is not possible, because the app needs a location to determine you moved 10m and Android needs an interval. A workaround would be to decrease the interval to something like 3 sec and set the movement threshold to 10m. Then the app will request a new location every 3 seconds and checks if it is at least 10m apart from the last point. If it is it will be recorded, otherwise it will be discarded. That will use a lot more battery though.
You can read more about the tracking profiles in the docs: colota.app/docs/guides/tracking-profiles
For places where you stay frequently (home, work, etc.) geofences work better. The stationary profile is good for situations where you are somewhere temporarily for longer (restaurant, friends, etc.)
Edit: Small correction after doing the math and reformatting after writing that on the phone 😂
Lowering the movement threshold will not smooth out a driving track. 10m at a 5s interval works out to 7.2 km/h, so above that speed every fix is already more than 10m from the last one and the threshold throws nothing away. So the tracking interval is your lever here. 5s at 50 km/h is a point roughly every 70m and even at a realistic average of 30 km/h it is still one every 40m, which is what cuts the corners.
-
on Dawarich 1.14.1 - now rendering millions of points in seconds! in c/selfhosted@lemmy.world · 2 Sep 2026
Out of the box Colota records every fix it gets by the device. So in case you haven’t already I would suggest to enable the accuracy filter and set it e.g. to 25m. This way all points with accuracy worse than 25m get filtered out. Also the movement threshold helps with the stationary drift
-
on Dawarich: 10 years of recorded tracks and now they have a purpose in c/selfhosted@lemmy.world · 2 Sep 2026
Colota dev here 👋 What do you want the profiles to do?
Profiles are an optional thing to finetune your tracking settings based on certain conditions, e.g. speed above or below x km/h, phone charging, Android Auto connected or being stationary. So you could raise the interval while charging, since that usually means you are not moving. To start with you could also make a pause zone at home and at work and turn on the WiFi pause. GPS stops completely while you are there and the app will consume much less battery. Tracking resumes when the WiFi drops.
I would add one at a time and see if it behaves like you want. When you create like 10 different tracking profiles with different priorities they can interfere with each other, so less is often more.
Edit: Also the accuracy filter is off by default so you probably want to enable it to reduce the noise
Tunnel is fine security wise. Keep the reverse proxy anyway and let the tunnel point at it. Routing, logs, etc. stay in one place this way.
Zero Trust with Google etc. is the way for family. Tailscale or Wireguard means installing a VPN client and making sure it keeps running, that’s too much for most people who just want to click a link.