0

The Discount XPan Experiment [Lubitel 2 (using a mask) | Opticolor 200]

preview

So this requires some explanation. Basically, I figured that I could get a “XPan” like panorama experience with my Lubitel 2 by putting a mask in it blocking the top and bottom of the normally square frame. Doing this gives you roughly double the shots on a single roll, in XPan format.

So I started cutting paper, and put this mask behind the normal film mask (on the inside of the camera). And another one in the viewfinder.

The positives:

  • The mask worked well enough
  • Using each number and large “dot” on the backing paper to align did work
  • I got some neat images

The issues:

  • Below f/11 the focus seems screwed, I assume that my modifications slightly pushed the film away. Especially on the right side of the frame
  • On one side I got a light leak (because I put tape there :3) on the other there’s a ghost of the tape visible
  • My lubitel 2 is growing a whole fungus metropolis, which ruined quite a few shots with extreme haze.

Overall a good experience tho, here are some more neat shots:

And the most messed up shot, after increasing the contrast (because it’s at f/5.6 in direct light):

So this requires some explanation. Basically, I figured that I could get a “XPan” like panorama experience with my Lubitel 2 by putting a mask in it blocking the top and bottom of the normally square frame. Doing this gives you roughly double the shots on a single roll, in XPan format.

So I started cutting paper, and put this mask behind the normal film mask (on the inside of the camera). And another one in the viewfinder.

The positives:

  • The mask worked well enough
  • Using each number and large “dot” on the backing paper to align did work
  • I got some neat images

The issues:

  • Below f/11 the focus seems screwed, I assume that my modifications slightly pushed the film away. Especially on the right side of the frame
  • On one side I got a light leak (because I put tape there :3) on the other there’s a ghost of the tape visible
  • My lubitel 2 is growing a whole fungus metropolis, which ruined quite a few shots with extreme haze.

Overall a good experience tho, here are some more neat shots:

And the most messed up shot, after increasing the contrast (because it’s at f/5.6 in direct light):

0

Neutral density filters for darkroom prints

preview

First off: I hope discussion posts are OK? I don’t see any rules except for tagging photo posts.

I have an old beseler B&W enlarger, no color filters or brightness configuration. I have a set of gels for contrast control.

When I’m printing 5x7 and I have my lens at the manufacturer’s recommended aperture size, exposure times are very short (4-6 seconds). It’s hard to get a good dodge/burn in such a short period. I can dial my lens down to f16, but even then I’m starting around 8 seconds for exposure, I’d like maybe 12-16.

I was thinking 1 or 2 stops of neutral density filter could slow down my exposure and give me more time to execute the print. Is that a thing people do?

First off: I hope discussion posts are OK? I don’t see any rules except for tagging photo posts.

I have an old beseler B&W enlarger, no color filters or brightness configuration. I have a set of gels for contrast control.

When I’m printing 5x7 and I have my lens at the manufacturer’s recommended aperture size, exposure times are very short (4-6 seconds). It’s hard to get a good dodge/burn in such a short period. I can dial my lens down to f16, but even then I’m starting around 8 seconds for exposure, I’d like maybe 12-16.

I was thinking 1 or 2 stops of neutral density filter could slow down my exposure and give me more time to execute the print. Is that a thing people do?

0

Nook [Canon F1 | FDn 35mm f2 | Kodak Gold 200-7]

Photograph of a sunlit nook in an otherwise dark medieval castle.
preview

One of the quaint nooks in the Turku Castle. I love how much contrast there is always between the dark walls within, compared to the light that casts on the white walls.

Metered by eye, as I almost always do since I can’t be bothered with keeping track of the batteries. Scanning with a Plustek OpticFilm 7600i, Vuescan for raws, Negpy for flipping into a positive.

One of the quaint nooks in the Turku Castle. I love how much contrast there is always between the dark walls within, compared to the light that casts on the white walls.

Metered by eye, as I almost always do since I can’t be bothered with keeping track of the batteries. Scanning with a Plustek OpticFilm 7600i, Vuescan for raws, Negpy for flipping into a positive.

0

Partial Eclipse [Canon EOS 300 | Tamron 24-70 f/2.8 | Ilford Pan F plus]

A black and white film photo of the partially eclipsed sun. The eclipsed sun is visible, with a slightly dimmer sun star around it.
preview

This is an enlarged scan of the full negative, which looks like this:

It was shot in manual, f/22 and shutterspeed 1/2000th, the darkest settings I could get. I didn’t have any filter but it was quite a wide angle shot and I covered the lens after and before shooting. This photo is exactly the same scene, but exposed for the foreground:

The shape of the eclipsed sun can be seen here as well, though slightly darker than the surrounding sun star and sky. This confused me, but apparently this is called Solarization and is common in film.

Anyway, this was my first roll of Pan F, and I love this stuff. I didn’t expect these photos to really be useful at all, but the latitude and detail of this film is absolutely crazy

This is an enlarged scan of the full negative, which looks like this:

It was shot in manual, f/22 and shutterspeed 1/2000th, the darkest settings I could get. I didn’t have any filter but it was quite a wide angle shot and I covered the lens after and before shooting. This photo is exactly the same scene, but exposed for the foreground:

The shape of the eclipsed sun can be seen here as well, though slightly darker than the surrounding sun star and sky. This confused me, but apparently this is called Solarization and is common in film.

Anyway, this was my first roll of Pan F, and I love this stuff. I didn’t expect these photos to really be useful at all, but the latitude and detail of this film is absolutely crazy

0

[OC] Neglected Barn [Graflex Speed Graphic 4x5 | 127mm f/4.7 | FPP Mummy 400 ISO]

preview

cross-posted from: slrpnk.net/post/39620790

An old neglected and crumbling barn on a family member’s farm. It hasn’t been used in probably 20 years now.

I developed this picture myself and the developing process was a bit of a disaster this time. The film slipped out of the holder in the developing vat, overlapped, got scratched by the film holder, messed up the developer and fixer times.

Of the vat this one and one other came out salvageable.

cross-posted from: slrpnk.net/post/39620790

An old neglected and crumbling barn on a family member’s farm. It hasn’t been used in probably 20 years now.

I developed this picture myself and the developing process was a bit of a disaster this time. The film slipped out of the holder in the developing vat, overlapped, got scratched by the film holder, messed up the developer and fixer times.

Of the vat this one and one other came out salvageable.

0

A rock in the East Fork Lewis River near Multon Falls [OC]

preview

cross-posted from: slrpnk.net/post/38262983

I went on a fun little day trip with my Graflex Speed Graphic 4x5 to a few places, unfortunately I didn’t realize until I got home that I underexposed the shots to a substantial degree due to my light meter app being misconfigured. There were a few shots that were salvageable, this was one of them.

cross-posted from: slrpnk.net/post/38262983

I went on a fun little day trip with my Graflex Speed Graphic 4x5 to a few places, unfortunately I didn’t realize until I got home that I underexposed the shots to a substantial degree due to my light meter app being misconfigured. There were a few shots that were salvageable, this was one of them.

0

Forest's Edge [Lubitel 2 | Phoenix II (cross-processed B/W)]

preview

So, uhhh, yeah. Why process Phoenix II in black and white? Well, let’s call it a happy little accident. The lab messed up and thought that it was black and white film. After the initial confusion, I was very surprised that there were somehow photos here. After finding out what happened the lab did a bit more to it, presumably to make sure that it remains stable.

Too bad I didn’t get to see what Phoenix II actually looks like, but honestly this experiment was nonetheless very interesting. Apparently when you process it as black and white film, you basically get Phoenix but in black and white.

So, uhhh, yeah. Why process Phoenix II in black and white? Well, let’s call it a happy little accident. The lab messed up and thought that it was black and white film. After the initial confusion, I was very surprised that there were somehow photos here. After finding out what happened the lab did a bit more to it, presumably to make sure that it remains stable.

Too bad I didn’t get to see what Phoenix II actually looks like, but honestly this experiment was nonetheless very interesting. Apparently when you process it as black and white film, you basically get Phoenix but in black and white.

0

The Two Towers [Minolta XG9 | 28mm f/3.5 MD | Harman Phoenix 200]

preview

My second attempt with Harman Phoenix 200, this time I metered most shots around 125 or 100 iso, which worked quite a bit better. Though I still had more under than overexposed shots.

Also, I’m very much a telelens person. This was another instance of me forcing myself to shoot with the wide-angle prime. I would’ve loved to see the 50mm version of this shot

My second attempt with Harman Phoenix 200, this time I metered most shots around 125 or 100 iso, which worked quite a bit better. Though I still had more under than overexposed shots.

Also, I’m very much a telelens person. This was another instance of me forcing myself to shoot with the wide-angle prime. I would’ve loved to see the 50mm version of this shot

0

Carrera [Leica M3 | 50mm Summicron DR | Kodak 500T]

preview

an image of the interior of an ambiguous antique blue sportscar. through the driver-side window, the glossy blue and chrome exterior contrasts the darker shades of browns and blacks that accent the interior of the car.

an image of the interior of an ambiguous antique blue sportscar. through the driver-side window, the glossy blue and chrome exterior contrasts the darker shades of browns and blacks that accent the interior of the car.

0

Santacolor 100 Expiration

preview

Hi everyone! I recently purchased a Santacolor 100 film stock, and I cannot find the expiration date written anywhere. Does anyone have any suggestion?

Thank you very much for your help!

Hi everyone! I recently purchased a Santacolor 100 film stock, and I cannot find the expiration date written anywhere. Does anyone have any suggestion?

Thank you very much for your help!

0

A spring prison | Canon AT-1 | FDn 35 mm f2 | Gold 200

A picture of a late 19th century prison building on top of a hill at springtime.
preview

A picture of the former Kakola prison, now converted to a hotel. The view from the serpentine road up the hill to it is one of my favorite spots in Turku, and a location I’ve photographed multiple times when testing out cameras.

Scanned with a Plustek 7600i, converted with NegPy, which is quickly becoming my favorite option for processing negatives.

This specific AT-1 is unfortunately overdue a shutter replacement. The curtain is starting to exhibit pinholes, and parts of the rubber coating can be seen floating around in the viewfinder. Shame, really, as it’s one of my favorite bodies to shoot with, but at least it won’t be expensive to replace as they tend to fetch less of a price than the other FD bodies.

A picture of the former Kakola prison, now converted to a hotel. The view from the serpentine road up the hill to it is one of my favorite spots in Turku, and a location I’ve photographed multiple times when testing out cameras.

Scanned with a Plustek 7600i, converted with NegPy, which is quickly becoming my favorite option for processing negatives.

This specific AT-1 is unfortunately overdue a shutter replacement. The curtain is starting to exhibit pinholes, and parts of the rubber coating can be seen floating around in the viewfinder. Shame, really, as it’s one of my favorite bodies to shoot with, but at least it won’t be expensive to replace as they tend to fetch less of a price than the other FD bodies.