148 comments

log in to comment.

  • .254

    Anything else is mental illness. .1 is sus but acceptable in a pinch. But why cut into the DHCP pool like that. 1-100 is DHCP, obviously.

    • @SpaghettiMaster@feddit.uk · 4 Nov 2026

      My DHCP is 100-something I dont remember because I don’t care about or respect the devices using DHCP.

      • As God intended. If you’re important in any context, you have a static IP. Otherwise you’re a second or third class device.

    • @hylobates@jlai.luOP · 4 Nov 2026

      Gonna use 10.233.212.254 on my 10.233.212.0/23 👍

    • @gastroglizzy@piefed.social · 4 Nov 2026 · edited

      My soho setup is:

      1-100 = DHCP

      101 = Default gateway

      102 - 199 = Unused

      201-254 = Static, manually assigned IPs (if any)

      I came up with it before I got my Net+. I told myself I’d change it as soon as it caused any problems. That was 12 years ago.

      • @SpaghettiMaster@feddit.uk · 4 Nov 2026

        I use the low numbers for statics, less to remember/communicate if its a 1/2 digit number instead of 3.

      • @wreckedcarzz@lemmy.world · 4 Nov 2026 · edited

        Mine is 1 for router/gateway, 2-199 is static with 2-9 (technically 1-9) being network gear, 10-19 being servers/related, 20-29 computers, 30-39 phones… all the way up to 100-119 for cameras and access, currently. And then 200+ for dhcp.

        Everything on the network runs dhcp but gets a static ip from the router. If I ever forget to assign a new device, it’s obvious since it won’t be near the related equipment, and it’ll be like 213 or something, sticking out like a sore thumb.

      • @j3tt@lemmy.world · 4 Nov 2026

        .1 gateway .2-.99 static range .100-.254 dynamic range (dhcp)

        btw. /23 networks are cool, too.

        • @the_morgan@lemmy.world · 4 Nov 2026

          yes to /23. Lower 24 is all static. Upper 24 is all DHCP. And the GW lives right in the middle at .1

    • @mlg@lemmy.world · 4 Nov 2026

      DHCP first is unhinged bruh

      1-127 is static, DHCP starts at 128.

      Libvirt/QEMU agrees with me so I must be right

    • @crandall@lemmy.today · 4 Nov 2026 · edited

      Why not 255?

      • @remotelove@lemmy.ca · 4 Nov 2026 · edited

        255 is reserved for broadcast.

        Edit: Yes, 255 is technically not ‘reserved’ by itself. I was only thinking about the addresses scoped to /24 for a simple answer. A broadcast address is reserved, though.

        When in doubt: www.calculator.net/ip-subnet-calculator.html

      • @rtxn@lemmy.world · 4 Nov 2026

        The highest address of a subnet is the broadcast address. You can’t assign it to a host.

        • @bluspoon@lemmy.world · 4 Nov 2026

          But 10.233.212.225 is middle of the range for the /23.

          • @Onomatopoeia@lemmy.cafe · 4 Nov 2026

            I had students like you when teaching Cisco classes…

            Their peers heads would always explode, lol.