0

We Put 3 MeshCore Repeaters 50 ft Up Here's the Real Range

play · youtube.com
YouTube We Put 3 MeshCore Repeaters 50 ft Up Here's the Real Range www.youtube.com
preview

How far can MeshCore really reach in the real world?

We put three MeshCore repeaters side by side about 50 feet in the air and tested them across the back roads of South Carolina to see how much range we could actually get from RAK Wireless, Seeed Studio, and the Heltec V4.

For this test, our rover used a Heltec V4 USB companion with a roof-mounted LoRa antenna and sent zero-hop MeshCore pings directly to each repeater. Custom test software logged GPS distance and signal-to-noise data so we could compare performance at the same locations.

The results were pretty clear:

  • Around 1 mile: solid, reliable coverage from all three
  • Around 1.5 to 2 miles: still usable, but starting to become intermittent
  • Around 3 to 4 miles: possible with good line of sight
  • Trees, hills, and terrain mattered far more than which radio we used

This is a real-world MeshCore range test, not a theoretical LoRa range estimate. All three repeaters were mounted together at the same height and tested from the same rover, giving us a much better look at what actually affects MeshCore coverage.

Hardware used
Heltec WiFi LoRa 32 V4
https://store.rokland.com/products/he…

Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit
https://www.seeedstudio.com/XIAO-nRF5…

RAK Wireless 1W LoRa Booster Kit / RAK3401
https://store.rakwireless.com/product…

Thanks to Circle B Rentals for letting us borrow the lift!

🔥Support the channel: 🔹YouTube Membership: / @brokensignal
🔹$15 off at Radioddity: https://www.radioddity.com/?ref=Broke…
🔹One free month of Starlink: https://www.starlink.com/residential?…

CHAPTERS
0:00 Intro & the build
5:31 Prepping the rover
5:52 50 feet up
6:23 The test plan
8:33 Software setup
8:53 The drive test
15:10 What the data says
18:58 Wrap-up & takeaways

How far can MeshCore really reach in the real world?

We put three MeshCore repeaters side by side about 50 feet in the air and tested them across the back roads of South Carolina to see how much range we could actually get from RAK Wireless, Seeed Studio, and the Heltec V4.

For this test, our rover used a Heltec V4 USB companion with a roof-mounted LoRa antenna and sent zero-hop MeshCore pings directly to each repeater. Custom test software logged GPS distance and signal-to-noise data so we could compare performance at the same locations.

The results were pretty clear:

  • Around 1 mile: solid, reliable coverage from all three
  • Around 1.5 to 2 miles: still usable, but starting to become intermittent
  • Around 3 to 4 miles: possible with good line of sight
  • Trees, hills, and terrain mattered far more than which radio we used

This is a real-world MeshCore range test, not a theoretical LoRa range estimate. All three repeaters were mounted together at the same height and tested from the same rover, giving us a much better look at what actually affects MeshCore coverage.

Hardware used
Heltec WiFi LoRa 32 V4
https://store.rokland.com/products/he…

Seeed Studio XIAO nRF52840 & Wio-SX1262 Kit
https://www.seeedstudio.com/XIAO-nRF5…

RAK Wireless 1W LoRa Booster Kit / RAK3401
https://store.rakwireless.com/product…

Thanks to Circle B Rentals for letting us borrow the lift!

🔥Support the channel: 🔹YouTube Membership: / @brokensignal
🔹$15 off at Radioddity: https://www.radioddity.com/?ref=Broke…
🔹One free month of Starlink: https://www.starlink.com/residential?…

CHAPTERS
0:00 Intro & the build
5:31 Prepping the rover
5:52 50 feet up
6:23 The test plan
8:33 Software setup
8:53 The drive test
15:10 What the data says
18:58 Wrap-up & takeaways

0

REPORT - File transfer testing results

preview

Hey there, I am new to piefed, the fediverse, and reticulum in general. so bear with me, please :)

I spent a lot of time putting together my field report (planning, setting up the file transfer scrips, setting up the testing plan, running the test, editing it all into a nice little post, etc) on building and testing file transfer protocols on my own mesh devices.

This report includes some PNG pictures like flow charts, and other stuff. I couldn’t figure out how to just do a direct copy paste without re-uploading the photos. So I turned this into a link post and hope you guys enjoy.

I’m still digging into it so I’m not entirely sure why I’m having such a hard time getting this file transfer to work over LoRa. I have been able to download larger files from other nomad net pages and I’m not sure what they are doing different than I am.

Best case scenario, I get everything figured out and working before the year is over :)

But in the meantime, has anyone here been able to get file transfer to function? Any advice to offer a newbie? hopefully i have inspired others to get something set up and tested on their own!

Hey there, I am new to piefed, the fediverse, and reticulum in general. so bear with me, please :)

I spent a lot of time putting together my field report (planning, setting up the file transfer scrips, setting up the testing plan, running the test, editing it all into a nice little post, etc) on building and testing file transfer protocols on my own mesh devices.

This report includes some PNG pictures like flow charts, and other stuff. I couldn’t figure out how to just do a direct copy paste without re-uploading the photos. So I turned this into a link post and hope you guys enjoy.

I’m still digging into it so I’m not entirely sure why I’m having such a hard time getting this file transfer to work over LoRa. I have been able to download larger files from other nomad net pages and I’m not sure what they are doing different than I am.

Best case scenario, I get everything figured out and working before the year is over :)

But in the meantime, has anyone here been able to get file transfer to function? Any advice to offer a newbie? hopefully i have inspired others to get something set up and tested on their own!

0

Heltec v3 won't go into download mode. Any tips?

preview

MeshCore 1.17.1 is currently installed, but I can’t connect via Bluetooth anymore. That’s why I wanted to start fresh, erase or flash a working version.

I’ve tried some button combinations but none of them get the v3 go into download mode. But I’m open to try more. Got any button combinations I don’t know about?

I’m trying to flash from CachyOS in Ungoogled Chromium (installed from Flatpack, maybe that’s an issue too?)

MeshCore 1.17.1 is currently installed, but I can’t connect via Bluetooth anymore. That’s why I wanted to start fresh, erase or flash a working version.

I’ve tried some button combinations but none of them get the v3 go into download mode. But I’m open to try more. Got any button combinations I don’t know about?

I’m trying to flash from CachyOS in Ungoogled Chromium (installed from Flatpack, maybe that’s an issue too?)

0

Update Your MeshCore Repeater Remotely! nRF52 OTA Firmware Guide

play · youtube.com
YouTube Update Your MeshCore Repeater Remotely! nRF52 OTA Firmware Guide www.youtube.com
preview

Have a MeshCore repeater installed on a roof, tower, or other hard-to-reach location? You don’t need to take it down every time a new firmware update is rele…

Have a MeshCore repeater installed on a roof, tower, or other hard-to-reach location? You don’t need to take it down every time a new firmware update is rele…

0

Good beginner about the differences between meshes?

preview

I’m curious about them, was looking at meshtastic, but then one of the articles mentioned limitations that one of the other two fixed, but unsure what can run which, why you would choose one over the other, or why there’s 3 standards which further splinters the community and lessens what you can talk through.

I’m curious about them, was looking at meshtastic, but then one of the articles mentioned limitations that one of the other two fixed, but unsure what can run which, why you would choose one over the other, or why there’s 3 standards which further splinters the community and lessens what you can talk through.

0

A $35 Solar Mesh Node Anyone Can Build: The People’s Repeater [Black Flag Civilian]

play · youtube.com
YouTube A $35 Solar Mesh Node Anyone Can Build: The People’s Repeater www.youtube.com
preview

The People’s Repeater is a cheap solar-powered LoRa mesh repeater you can build yourself using a $10 garden light and a small, 3D printed hub. In this video I walk through the design, do a range test, blast the repeater with pressurized water for an hour, and then show you how to build one step by step.

My goal is to get Meshcore and Meshtastic into actual neighborhoods, where ordinary people can build their own off-grid, encrypted text messaging infrastructure.

Support Black Flag Civilian & connect to the BFC discord: https://www.subscribestar.com/blackflagcivilian

FREE DOWNLOAD of People’s Repeater Hub & Mount STL Files: https://www.printables.com/model/1768397-the-peoples-repeater-affordable-solar-mesh-repeate

People’s Repeater Hubs & Mounts for sale on Black Flag Civilian’s web store: https://blackflagcivilian.bigcartel.com/product/3d-printed-peoples-repeater-hub-mount

Parts lists (including links to specific parts) are available at both Printables and the BFC Webstore, linked above.

The People’s Repeater is a cheap solar-powered LoRa mesh repeater you can build yourself using a $10 garden light and a small, 3D printed hub. In this video I walk through the design, do a range test, blast the repeater with pressurized water for an hour, and then show you how to build one step by step.

My goal is to get Meshcore and Meshtastic into actual neighborhoods, where ordinary people can build their own off-grid, encrypted text messaging infrastructure.

Support Black Flag Civilian & connect to the BFC discord: https://www.subscribestar.com/blackflagcivilian

FREE DOWNLOAD of People’s Repeater Hub & Mount STL Files: https://www.printables.com/model/1768397-the-peoples-repeater-affordable-solar-mesh-repeate

People’s Repeater Hubs & Mounts for sale on Black Flag Civilian’s web store: https://blackflagcivilian.bigcartel.com/product/3d-printed-peoples-repeater-hub-mount

Parts lists (including links to specific parts) are available at both Printables and the BFC Webstore, linked above.

0

My first Meshtastic radio! And the smallest case I could find. (more photos inside)

preview

Smallest that would fit a battery and a Heltec v4.

Live in a fairly small town in the southeast US but the local Amateur Radio club has a Meshtastic radio on a tall building in town and I was immediately able to see ~20 nodes and had 5 people talking in LongFast.

Wish I could have an outdoor pole mounted base station, but living in an apartment makes it hard. It seems to work okay on my 3rd floor windowsill though!

Link to case model: https://www.printables.com/model/1519914-heltec-lora-32-v4v3-pocket-pager-case/files

Smallest that would fit a battery and a Heltec v4.

Live in a fairly small town in the southeast US but the local Amateur Radio club has a Meshtastic radio on a tall building in town and I was immediately able to see ~20 nodes and had 5 people talking in LongFast.

Wish I could have an outdoor pole mounted base station, but living in an apartment makes it hard. It seems to work okay on my 3rd floor windowsill though!

Link to case model: https://www.printables.com/model/1519914-heltec-lora-32-v4v3-pocket-pager-case/files