0

Toilet Paper Holder Repair

preview

My wife told me she fixed the toilet paper holder. More specifically, “I was tired of dealing with it so I grabbed a hot glue gun, filled that sucker up, and held it in place while the glue cooled.”

I was actually kind of impressed.

My wife told me she fixed the toilet paper holder. More specifically, “I was tired of dealing with it so I grabbed a hot glue gun, filled that sucker up, and held it in place while the glue cooled.”

I was actually kind of impressed.

0

I got a 12 inch home theater subwoofer for $15 because one of the rubbery legs was missing. I replaced it with a wine cork

preview

cross-posted from: lemmy.world/post/37968248

I hope you find this less exciting than the vacuum cord replacement post, in which I was (rightly) chastised for being vaguely interesting

cross-posted from: lemmy.world/post/37968248

I hope you find this less exciting than the vacuum cord replacement post, in which I was (rightly) chastised for being vaguely interesting

0

Poor Man's Motor Brake

preview

I have an electric lawnmower that I custom built. After years of reliable service, it needed a complete teardown and rebuild. It’s powered by a 2HP induction motor and one of the features I wanted to add to it was an electronic brake. That way the blade stops quickly whenever the dead man switch is released.

Motor brakes already exist but they are very expensive so I figured I would try to roll my own.

DC injection brakes are a common type of motor brake. They basically work by disconnecting the mains power (120VAC in this case) and injecting a pulse of low voltage DC power (24VDC in this case) into the motor windings. This creates a non-rotating magnetic field which stops the rotation of the stator. It has to be powerful enough to stop the motor but without causing damage to it or the driven load.

This is what I came up with. The dead man switch cable pulls the primary switch. Primary switch closes the primary relay, delivering 24VAC to the contactor and turning the motor on.

When the dead man switch is released, the primary relay shunts power to the timed relay(white), momentarily backfeeding 24VDC to the motor and causing it to stop. It actually works well.

There is a small risk that if the contactor were to stick, it would let the smoke out. But, the rectifier and transformer would take the brunt of that failure and as cheap as those are to replace, that’s an acceptable risk.

I have an electric lawnmower that I custom built. After years of reliable service, it needed a complete teardown and rebuild. It’s powered by a 2HP induction motor and one of the features I wanted to add to it was an electronic brake. That way the blade stops quickly whenever the dead man switch is released.

Motor brakes already exist but they are very expensive so I figured I would try to roll my own.

DC injection brakes are a common type of motor brake. They basically work by disconnecting the mains power (120VAC in this case) and injecting a pulse of low voltage DC power (24VDC in this case) into the motor windings. This creates a non-rotating magnetic field which stops the rotation of the stator. It has to be powerful enough to stop the motor but without causing damage to it or the driven load.

This is what I came up with. The dead man switch cable pulls the primary switch. Primary switch closes the primary relay, delivering 24VAC to the contactor and turning the motor on.

When the dead man switch is released, the primary relay shunts power to the timed relay(white), momentarily backfeeding 24VDC to the motor and causing it to stop. It actually works well.

There is a small risk that if the contactor were to stick, it would let the smoke out. But, the rectifier and transformer would take the brunt of that failure and as cheap as those are to replace, that’s an acceptable risk.

0

Getting Boat to Plane Out

preview

I’ve had a little 12 ft (3.28m) aluminum boat with a 6 HP Johnson outboard for years. The motor is big enough to get from point A -> B but not big enough to push the boat up on plane if I’m the only one in it.

I try to put as much weight at the bow as I can but it’s usually still not enough. Yesterday, I was going fishing for a bit and I thought, “I wonder what would happen if I put this cinder block up front?”

It worked great. I don’t know why I didn’t try it years ago.

I’ve had a little 12 ft (3.28m) aluminum boat with a 6 HP Johnson outboard for years. The motor is big enough to get from point A -> B but not big enough to push the boat up on plane if I’m the only one in it.

I try to put as much weight at the bow as I can but it’s usually still not enough. Yesterday, I was going fishing for a bit and I thought, “I wonder what would happen if I put this cinder block up front?”

It worked great. I don’t know why I didn’t try it years ago.