showing posts tagged #sewingrepairing — clear

0

Welcome to Sewing, Repairing and Reducing Waste

preview

I have created this community to share projects and ideas with people who are interested in sewing and textile crafts made primarily from reclaimed and repurposed materials. That might be making bags from pillowcases, resewing a shirt into a child’s dress, or repairing the hole in the knee of your jeans.

Feel free to share any projects you have made, or ask for questions or ideas for future projects.

I have created this community to share projects and ideas with people who are interested in sewing and textile crafts made primarily from reclaimed and repurposed materials. That might be making bags from pillowcases, resewing a shirt into a child’s dress, or repairing the hole in the knee of your jeans.

Feel free to share any projects you have made, or ask for questions or ideas for future projects.

0

How would you fix these scuffs?

preview

3cAYOi1Ez2WOONQ.jpeg

The first idea I was just black shoe polish, but I’m not sure if that would really accomplish an acceptable fix. The person who wants me to fix them needs them for a formal occasion, so I would like them to look nice.

Any suggestions?

3cAYOi1Ez2WOONQ.jpeg

The first idea I was just black shoe polish, but I’m not sure if that would really accomplish an acceptable fix. The person who wants me to fix them needs them for a formal occasion, so I would like them to look nice.

Any suggestions?

0

How feasible is it to create two extra internal middle duvet cover ties with snaps, mine only came with 4 corner ties but i think it would lay out nicer if the middle 2 were also fastenedlikewise?

preview

What tools/supplies would i need?

I imagine

  • whatever that kind of tie fabric usually is
  • snaps
  • …

What tools/supplies would i need?

I imagine

  • whatever that kind of tie fabric usually is
  • snaps
  • …
0

I think it's funny to co-opt car culture for secondhand sewing machines

preview

I picked up a vintage machine from a garage sale, and I’m struck with the similarities between all secondhand machines, both sewing and vehicular. Parts & repair are gonna cost 3-5x what the initial cost was. I’m trawling for parts online and seeing if I can get aftermarket upgrades for the electronics.

I’ve been affectionately calling her my shitbox and my beater because being left sitting in an uninsulated garage/shed for forty years means she looks rough even if she runs fine. The original paint job’s ruined, so I can feel free to slap all sorts of stickers or decals on her.

I picked up a vintage machine from a garage sale, and I’m struck with the similarities between all secondhand machines, both sewing and vehicular. Parts & repair are gonna cost 3-5x what the initial cost was. I’m trawling for parts online and seeing if I can get aftermarket upgrades for the electronics.

I’ve been affectionately calling her my shitbox and my beater because being left sitting in an uninsulated garage/shed for forty years means she looks rough even if she runs fine. The original paint job’s ruined, so I can feel free to slap all sorts of stickers or decals on her.

0

EDC Sewing Kit?

preview

Looking to make an everyday carry sewing kit that I can have in my backpack for emergency sewing jobs. Other than a needle, thread, and scissors of some kind, any other suggested items and why they would be needed?

Looking to make an everyday carry sewing kit that I can have in my backpack for emergency sewing jobs. Other than a needle, thread, and scissors of some kind, any other suggested items and why they would be needed?

0

Anyone have tutorial recommendations for altering dress collar/necklines?

preview

I have some scoop neck button down dresses and rompers that I don’t really like the neckline on. Anyone have a good resources for modifying necklines? Any recommendations that are especially easy to go to from a scoop neck? (V neck comes to mind?).

This sort of neckline

I have some scoop neck button down dresses and rompers that I don’t really like the neckline on. Anyone have a good resources for modifying necklines? Any recommendations that are especially easy to go to from a scoop neck? (V neck comes to mind?).

This sort of neckline

0

Speed issues in old foot-pedal?

preview

Hey gang, I was hoping I could pick some people’s brains on this. I have a singer rocketeer I’m restoring and part of that is that I replaced the foot pedal with one off an old alco. This inadvertently diagnosed the issue with the alco as being the foot pedal. When you press down, the motor hums but seizes until you get about half way, then it runs at Moc 2 until you ease back.

There any way to fix this or do I just need a new one?

Hey gang, I was hoping I could pick some people’s brains on this. I have a singer rocketeer I’m restoring and part of that is that I replaced the foot pedal with one off an old alco. This inadvertently diagnosed the issue with the alco as being the foot pedal. When you press down, the motor hums but seizes until you get about half way, then it runs at Moc 2 until you ease back.

There any way to fix this or do I just need a new one?

0

I replaced the zipper on my bag.

preview

The zipper on my bag stopped working about a year ago. I had been trying to use it anyway but things kept falling out. I recently learned that hand stitching isn’t that hard, so I went out and got a new zipper. Here’s the old zipper for reference

The zipper on my bag stopped working about a year ago. I had been trying to use it anyway but things kept falling out. I recently learned that hand stitching isn’t that hard, so I went out and got a new zipper. Here’s the old zipper for reference

0

Repaired Couch Cushion!

preview

The seams were starting to go, so finally got out the thread and needle and sewed it back up!

After going through a billion 11 sharps as they were the only ones my mother used, I finally found a larger size as my eyes can not thread those anymore.

The seams were starting to go, so finally got out the thread and needle and sewed it back up!

After going through a billion 11 sharps as they were the only ones my mother used, I finally found a larger size as my eyes can not thread those anymore.

0

My sweetest sweet just secretly sewed the handle of my favourite rucksack and I'm so happily surprised.

preview

I thought it’s going to go the way of the dodo since the plastic fabric is very weird. My girlfriend thought differently and somehow fixes it!

Cool stuff!

I thought it’s going to go the way of the dodo since the plastic fabric is very weird. My girlfriend thought differently and somehow fixes it!

Cool stuff!

0

dog bed

jeans material sewed in a rough quilt checkerboard
preview

(just visualize a very rough, thick, quilt/rug to go on the floor)

I’ve sewn a bunch of old jean pieces together, mostly to learn how to sew jean material with a twin needle (only broke one so far) on my cheap sewing machine, but I didn’t think the project through completely.

There are two problems.

  1. It seems the quilt batting I can find around here is pretty thin (1cm) and pretty expensive: CHF18 (US$23) per meter, and it is only 150cm wide. So to double or triple it up to get some decent thickness, for an ~84cm × ~84cm top and my scrap project is starting to look a tad expensive (like near enough to half the cost of a sewing machine). Any thoughts on stuffing material (it’s just a dog bed after all) - or should I just suck it up and buy the batting? I’ve looked at using a rug purchased from a low-end Ikea-type store, but they seemed too thin and too expensive - and it goes against the reducing waste idea, right? I thought maybe I could piece together a second layer of batting from the remnant of one purchased meter, to get a bed that’s at least a couple of centimeters thick, but wasn’t sure how much integrity a separate strip would have when just tacked in (see problem 2). Or I guess I could cut the cover down to under 75cm × 75cm; it’s not that big of a dog. Any feedback?

  2. I was planning on using an old shower curtain for the bottom under cover, with through tack stitches, instead of buttons, at the checkerboard corners: no problem there I think. But making a bag, to put the filler in, by sewing it inside out leaves one edge different than the others (as the last closing seam) when it’s turned right-side out. How do quilts normally get closed on all sides?

(just visualize a very rough, thick, quilt/rug to go on the floor)

I’ve sewn a bunch of old jean pieces together, mostly to learn how to sew jean material with a twin needle (only broke one so far) on my cheap sewing machine, but I didn’t think the project through completely.

There are two problems.

  1. It seems the quilt batting I can find around here is pretty thin (1cm) and pretty expensive: CHF18 (US$23) per meter, and it is only 150cm wide. So to double or triple it up to get some decent thickness, for an ~84cm × ~84cm top and my scrap project is starting to look a tad expensive (like near enough to half the cost of a sewing machine). Any thoughts on stuffing material (it’s just a dog bed after all) - or should I just suck it up and buy the batting? I’ve looked at using a rug purchased from a low-end Ikea-type store, but they seemed too thin and too expensive - and it goes against the reducing waste idea, right? I thought maybe I could piece together a second layer of batting from the remnant of one purchased meter, to get a bed that’s at least a couple of centimeters thick, but wasn’t sure how much integrity a separate strip would have when just tacked in (see problem 2). Or I guess I could cut the cover down to under 75cm × 75cm; it’s not that big of a dog. Any feedback?

  2. I was planning on using an old shower curtain for the bottom under cover, with through tack stitches, instead of buttons, at the checkerboard corners: no problem there I think. But making a bag, to put the filler in, by sewing it inside out leaves one edge different than the others (as the last closing seam) when it’s turned right-side out. How do quilts normally get closed on all sides?

0

Altering pants

preview

Hello! I need some advice on how to alter these pants, any tips or do on how to make them larger? I’m fairly new to sewing.

I found these cargo pants this summer on a second hand and I could just get them on me! So I brought a second pair of similar fabric so that I can make them bigger.

Ive added a few pins on where I plan to make a dart as thats the only space with no pockets that go down the tights.

I think I need to add around 6cm by the waist and 3cm by the hip and then I’ll let it taper down to the knee seam. Does that sound like an okay play?

Here are some more pics that are overly bright since the pants are black:

Front:

Back:

Side:

Hello! I need some advice on how to alter these pants, any tips or do on how to make them larger? I’m fairly new to sewing.

I found these cargo pants this summer on a second hand and I could just get them on me! So I brought a second pair of similar fabric so that I can make them bigger.

Ive added a few pins on where I plan to make a dart as thats the only space with no pockets that go down the tights.

I think I need to add around 6cm by the waist and 3cm by the hip and then I’ll let it taper down to the knee seam. Does that sound like an okay play?

Here are some more pics that are overly bright since the pants are black:

Front:

Back:

Side:

0

How to repair jacket lining?

preview

I recently purchased a second-hand leather jacket, and the lining has significant holes in it where the pockets are. This is because the pockets extend about 2cm further down then the lining would allow.

Naturally I would want to fix these holes and stop the fraying, but I’m not sure how I could go about this. I don’t have any suitable material to patch it, and wouldn’t want to cause further damage. Having a patch that dangles below the hem to accommodate the pocket is undesirable, but losing pocket space instead would be a bummer. I’m also uncertain how well I could attach a different material to the existing lining, especially with my limited skills.

It should be noted that there is still some material attached to the leather along the hem of the jacket, which could be used to attach a patch.

Any recommendations would be appreciated, as I’ve never had to do anything like this before.

I recently purchased a second-hand leather jacket, and the lining has significant holes in it where the pockets are. This is because the pockets extend about 2cm further down then the lining would allow.

Naturally I would want to fix these holes and stop the fraying, but I’m not sure how I could go about this. I don’t have any suitable material to patch it, and wouldn’t want to cause further damage. Having a patch that dangles below the hem to accommodate the pocket is undesirable, but losing pocket space instead would be a bummer. I’m also uncertain how well I could attach a different material to the existing lining, especially with my limited skills.

It should be noted that there is still some material attached to the leather along the hem of the jacket, which could be used to attach a patch.

Any recommendations would be appreciated, as I’ve never had to do anything like this before.

0

My Patched Pants [A crosspost]

preview

cross-posted from: lemmy.blahaj.zone/post/31929482

Yes I patched them myself

Yes I know the patches stick out

And yes I do wear them out and about

EDIT: The back also has a few patches for those curious.

Pic of the back

cross-posted from: lemmy.blahaj.zone/post/31929482

Yes I patched them myself

Yes I know the patches stick out

And yes I do wear them out and about

EDIT: The back also has a few patches for those curious.

Pic of the back

0

Stop hole in wool shirt from getting worse? Penny for scale.

preview

This is a lightweight wool shirt, smartwool brand. I think it’s 90 or 100 percent wool, I forgot to photograph the tag.

I use it as a base layer while camping, so looks aren’t that important, but I don’t want it to fall apart.

I got a couple of snags on my last trip, and I poked most of them back in without issue, these two were bigger and I tried stretching the fabric slightly to pull them in. I did it gently, but they both broke 🫠

Should I use a patch? Or sew a few loose stitches to hold things together? Or just leave it alone?

The underside of the shirt is bright orange, the hole is only the top layer, if that makes sense?

Thanks!

This is a lightweight wool shirt, smartwool brand. I think it’s 90 or 100 percent wool, I forgot to photograph the tag.

I use it as a base layer while camping, so looks aren’t that important, but I don’t want it to fall apart.

I got a couple of snags on my last trip, and I poked most of them back in without issue, these two were bigger and I tried stretching the fabric slightly to pull them in. I did it gently, but they both broke 🫠

Should I use a patch? Or sew a few loose stitches to hold things together? Or just leave it alone?

The underside of the shirt is bright orange, the hole is only the top layer, if that makes sense?

Thanks!

0

Any experience with using iron on patches for holes in jeans front pockets?

preview

Greetings!

I almost always end up with jeans with holes in the bottom of the front pockets, because I wear a lot of stuff in my pockets all the time. The pockets give up way before the jeans themselves, but I don’t want to stop wearing a perfectly fine pair of jeans, just because the pockets have given up, so I need to fix them.

In the past I have fixed the issue by folding the pockets above where the holes are, and then sewing across, so as to create a new bottom of the pocket. However, this means I lose pocket volume, which is not what I want.

So, I’ve been looking at iron on patches for fixing denim, and thinking that might do the trick. I have no experience with iron on patches in general, so wanted to ask if anyone has experience with these?

  • Are they easy to apply?
  • Do they last, both in terms of their ability to stay put where they were applied, and to wear?

Thanks for sharing any experience you’ve had with iron on patches for this purpose.

Greetings!

I almost always end up with jeans with holes in the bottom of the front pockets, because I wear a lot of stuff in my pockets all the time. The pockets give up way before the jeans themselves, but I don’t want to stop wearing a perfectly fine pair of jeans, just because the pockets have given up, so I need to fix them.

In the past I have fixed the issue by folding the pockets above where the holes are, and then sewing across, so as to create a new bottom of the pocket. However, this means I lose pocket volume, which is not what I want.

So, I’ve been looking at iron on patches for fixing denim, and thinking that might do the trick. I have no experience with iron on patches in general, so wanted to ask if anyone has experience with these?

  • Are they easy to apply?
  • Do they last, both in terms of their ability to stay put where they were applied, and to wear?

Thanks for sharing any experience you’ve had with iron on patches for this purpose.

0

Is there a way to improve badly cut clothes?

preview

I buy most of my clothes second hand, the quality is much better for the price but when I look for something precise, too replace something wear out for example, rather than a new piece for my wardrobe, it take me a lot of time to find what I look for. Meanwhile, fast fashion brand sells lots of clothing that seems exactly what I need except that the quality is fast fashion quality :(

Is there any general advices you have to improve bad quality clothing?

Here is two specific examples that really disturb my shopping experience:

  • T-shirt that have not T, because the cloth piece under the arm has been removed. The t-shirt looks fine, folded or wear with your arms lying against your body but as soon a you raise them, in a T, or high to reach some high shelf, the whole t-shirt raises with them
  • Long sleeves than a just long enough to keep your arms lying against your body. If you go for a crazy move, like using your hand, you hand up with almost 3/4 sleeves.

What do you think? Is there anything that can be done to improve these type of badly cut clothes? What about all the others? With loose stitches, bad made buttons… You know what fast fashion looks like.

I buy most of my clothes second hand, the quality is much better for the price but when I look for something precise, too replace something wear out for example, rather than a new piece for my wardrobe, it take me a lot of time to find what I look for. Meanwhile, fast fashion brand sells lots of clothing that seems exactly what I need except that the quality is fast fashion quality :(

Is there any general advices you have to improve bad quality clothing?

Here is two specific examples that really disturb my shopping experience:

  • T-shirt that have not T, because the cloth piece under the arm has been removed. The t-shirt looks fine, folded or wear with your arms lying against your body but as soon a you raise them, in a T, or high to reach some high shelf, the whole t-shirt raises with them
  • Long sleeves than a just long enough to keep your arms lying against your body. If you go for a crazy move, like using your hand, you hand up with almost 3/4 sleeves.

What do you think? Is there anything that can be done to improve these type of badly cut clothes? What about all the others? With loose stitches, bad made buttons… You know what fast fashion looks like.

0

Finding a good beginner sewing machine

preview

Hi everyone!

Not sure if this is the right place but I’ve been looking to buy a sewing machine recently and haven’t really been sure about what to get or what to look out for.

Does anyone have any recommendations? I’ve used some before, but never owned one. Don’t know what a good budget might be but I’m happy to spend a couple hundred if need be? Some googling seems to show that to be reasonable, but I’m not sure if I’m getting ripped off (on either quality or price).

Thanks for any advice!

Hi everyone!

Not sure if this is the right place but I’ve been looking to buy a sewing machine recently and haven’t really been sure about what to get or what to look out for.

Does anyone have any recommendations? I’ve used some before, but never owned one. Don’t know what a good budget might be but I’m happy to spend a couple hundred if need be? Some googling seems to show that to be reasonable, but I’m not sure if I’m getting ripped off (on either quality or price).

Thanks for any advice!

0

Second attempt at darning a sock with a Speedweve type loom

A photo of the bottom of a white and gray sock. A hole has been repaired with a woven blue patch that has several shades of blue in it
preview

My first attempt doesn’t look as nice, since I was trying to sew down the last loops of the warp one at a time instead of taking them all off the hooks at once and then sewing them down.

I think this one turned out alright, though! I just used some variegated craft thread that looked about the same size as pearl thread, but was cheaper and came in a variety pack.

My first attempt doesn’t look as nice, since I was trying to sew down the last loops of the warp one at a time instead of taking them all off the hooks at once and then sewing them down.

I think this one turned out alright, though! I just used some variegated craft thread that looked about the same size as pearl thread, but was cheaper and came in a variety pack.

0

My second attempt at sashiko from a little while ago :)

preview

And a replacement button with a similar color scheme :)

At some point I also wanna get some mini patches to go where there’s currently the little embroidered polo player. The theme is lavender lemonade, so a little lavender and a little lemon would be cute :)

And a replacement button with a similar color scheme :)

At some point I also wanna get some mini patches to go where there’s currently the little embroidered polo player. The theme is lavender lemonade, so a little lavender and a little lemon would be cute :)

0

Repair Advice: Broken Bamboo Cup Lid

preview

I’d love some advice on repairing or replacing this bamboo cup lid, which has lasted around 5 years otherwise!

I’ve thought about doing a kintsugi type repair, since I still have the broken pieces:

However, most kintsugi kits I’ve seen for sale online are either pretty expensive or not meant to be in contact with food. I’m cautious about using a cheaper epoxy for that reason as well – I’m not sure how concerned I should be about chemicals leaching into my coffee even after it’s cured.

Maybe I should just look for a replacement lid online? This one is about 9.5cm across, but I’m not sure they come in standard sizes

I’d love some advice on repairing or replacing this bamboo cup lid, which has lasted around 5 years otherwise!

I’ve thought about doing a kintsugi type repair, since I still have the broken pieces:

However, most kintsugi kits I’ve seen for sale online are either pretty expensive or not meant to be in contact with food. I’m cautious about using a cheaper epoxy for that reason as well – I’m not sure how concerned I should be about chemicals leaching into my coffee even after it’s cured.

Maybe I should just look for a replacement lid online? This one is about 9.5cm across, but I’m not sure they come in standard sizes

0

Backpack Repair Update: One Year Later

preview

I was recently looking at old posts in this community, and it reminded me that it’s been over a year since I repaired these two backpacks and made a few posts about the process.

Both of these have held up remarkable well in a year of near daily use. Some of the shoe-goo sealant is starting to detach in places:

But most of it is still in place. The fabric patches and sewing line I used to close the rips are also still in one piece:

The shoe goo is still in a drawer somewhere, so I may apply a fresh coat at some point, if more of it flakes off. But overall, I’m really happy with how these have held up!

I was recently looking at old posts in this community, and it reminded me that it’s been over a year since I repaired these two backpacks and made a few posts about the process.

Both of these have held up remarkable well in a year of near daily use. Some of the shoe-goo sealant is starting to detach in places:

But most of it is still in place. The fabric patches and sewing line I used to close the rips are also still in one piece:

The shoe goo is still in a drawer somewhere, so I may apply a fresh coat at some point, if more of it flakes off. But overall, I’m really happy with how these have held up!

0

Sewing a DIY Tent

play · youtube.com
YouTube Construction Material DIY Tent #Camping m.youtube.com
preview

This video made me think of this community. Fixing a camping chair and stool with Tyvek is pretty inventive, as well as sewing a tent with the material!

This video made me think of this community. Fixing a camping chair and stool with Tyvek is pretty inventive, as well as sewing a tent with the material!

0

Sewing seatbelt webbing

preview

Hello! I have a sling bag that I really like, but the strap doesn’t take it as close to my body as I would like. I have a sewing machine, but I have never used it for stitching seatbelt webbing. What sort of needle would I need to use, and which type of thread would be best suited for the material?

Hello! I have a sling bag that I really like, but the strap doesn’t take it as close to my body as I would like. I have a sewing machine, but I have never used it for stitching seatbelt webbing. What sort of needle would I need to use, and which type of thread would be best suited for the material?

0

[Request] How Should I Repair this Coat?

preview

I have this nice heavy winter coat that I accidentally tore a small hole in the shell near a chest pocket. It’s a tiny rip, but I don’t want it to get any larger. Any advice for how I should go about repairing it? I want to try a visible mend instead of a simple patch. The tag says the shell is listed as 61% cotton 39% nylon.

Picture 1

Picture 2

I have this nice heavy winter coat that I accidentally tore a small hole in the shell near a chest pocket. It’s a tiny rip, but I don’t want it to get any larger. Any advice for how I should go about repairing it? I want to try a visible mend instead of a simple patch. The tag says the shell is listed as 61% cotton 39% nylon.

Picture 1

Picture 2

0

bought used machine - needle broke - diagnosis needed

preview

cross-posted from: slrpnk.net/post/3317096

I bought this machine from the 1960s (cost: 12 Big Macs). I did not clean it or oil it as I wanted to just see if it works.

It made a straight line without issue. Then on the 2nd straight line the top thread got bundled below the plate. I cleared that & started over. Then went to the narrowest zig-zag setting and the needle broke.

I’m just starting to learn. I know from videos that pushing the fabric while the needle is down can bend the needle and put it in harms way. I don’t think I was pushing or pulling the fabric when the needle broke. So I wonder what would cause this-- does this mean the timing is off and needs adjustment?

I’m not enthusiastic about doing much experimentation at this point because needles seem pricey enough that I don’t want to break many (1¼ the cost of a Big Mac in my area buys 5 needles). But I just removed the top thread and bobbin and installed the empty bobbin case. When I manually spin the wheel with no thread at various zig-zig widths, there is no apparent contact with the needle. So perhaps the thread occasionally bundling up under the plate is part of the issue.

update: if I load thread and manually crank for the zig-zag patterns, most stitches are missed. The thread is plunged in from the top but does not get grabbed from the bottom most of the time.

cross-posted from: slrpnk.net/post/3317096

I bought this machine from the 1960s (cost: 12 Big Macs). I did not clean it or oil it as I wanted to just see if it works.

It made a straight line without issue. Then on the 2nd straight line the top thread got bundled below the plate. I cleared that & started over. Then went to the narrowest zig-zag setting and the needle broke.

I’m just starting to learn. I know from videos that pushing the fabric while the needle is down can bend the needle and put it in harms way. I don’t think I was pushing or pulling the fabric when the needle broke. So I wonder what would cause this-- does this mean the timing is off and needs adjustment?

I’m not enthusiastic about doing much experimentation at this point because needles seem pricey enough that I don’t want to break many (1¼ the cost of a Big Mac in my area buys 5 needles). But I just removed the top thread and bobbin and installed the empty bobbin case. When I manually spin the wheel with no thread at various zig-zig widths, there is no apparent contact with the needle. So perhaps the thread occasionally bundling up under the plate is part of the issue.

update: if I load thread and manually crank for the zig-zag patterns, most stitches are missed. The thread is plunged in from the top but does not get grabbed from the bottom most of the time.

0

[answered] Front-load bobbins -- any advantages? Or only downsides?

preview

I watched several sewing videos in preparation to buy a machine. The consensus is that drop-in bobbins are easier for beginners than front-load. Well I’m the kind of person who wants to get to the /expert/ stage & if that means doing things the hard way, so be it. But then the question is, what are the advantages of front-loads?

Youtube video id rbhfilt68vI titled “TESTED Best Sewing Machines for Beginners” suggests that front-load bobbins are more likely to get tangled and jammed. That sounds like an anti-feature for both beginners and experienced users. So why do front-load bobbin designs even exist?

(edit)

I think I got my answer. Video F7GTjrc-m5w says front-loading enables the machine to go faster and also enables you to switch bobbins mid-task.

I care more about jamming than speed. But the mid-task swapping sounds useful because I don’t suppose you can predict when it will run out. So I guess I need to consider how much stock to put into the comment about jamming.

I watched several sewing videos in preparation to buy a machine. The consensus is that drop-in bobbins are easier for beginners than front-load. Well I’m the kind of person who wants to get to the /expert/ stage & if that means doing things the hard way, so be it. But then the question is, what are the advantages of front-loads?

Youtube video id rbhfilt68vI titled “TESTED Best Sewing Machines for Beginners” suggests that front-load bobbins are more likely to get tangled and jammed. That sounds like an anti-feature for both beginners and experienced users. So why do front-load bobbin designs even exist?

(edit)

I think I got my answer. Video F7GTjrc-m5w says front-loading enables the machine to go faster and also enables you to switch bobbins mid-task.

I care more about jamming than speed. But the mid-task swapping sounds useful because I don’t suppose you can predict when it will run out. So I guess I need to consider how much stock to put into the comment about jamming.

0

Second darned sock

preview

I’ve recently started darning my worn-out socks (shoutout to that one poster who posted a tutorial) and so it’s going really well! My socks are still comfy, and the woven patches do the job.

I’ve recently started darning my worn-out socks (shoutout to that one poster who posted a tutorial) and so it’s going really well! My socks are still comfy, and the woven patches do the job.

0

How do FOSS enthusiasts sew? What hardware do they buy?

preview

cross-posted from: slrpnk.net/post/2890733

I think I need a sewing machine that can do a variety of different kinds of stitches. One use case is to repair holey socks by cannabalizing fabric from other holey socks. Thus the stitch needs to be the kind that can stretch and ideally not create an awkward feeling on the foot.

Some sewing machines have a fixed number of stitches they can do. Would it make sense to get an embroidery machine and use #inkStitch (an Inkscape variant)? I’m not sure if that’s strictly for embroidery – or does that give the ability to do a variety of stitches using FOSS?

The inkstitch.org website steers people toward taking a basic sewing machine and modifying it using 3d printed parts. That’s too ambitious for me. I don’t want a hardware project. I just want to buy hardware that’s ready to go and use free software to control it. Is that possible with things that exist already?

cross-posted from: slrpnk.net/post/2890733

I think I need a sewing machine that can do a variety of different kinds of stitches. One use case is to repair holey socks by cannabalizing fabric from other holey socks. Thus the stitch needs to be the kind that can stretch and ideally not create an awkward feeling on the foot.

Some sewing machines have a fixed number of stitches they can do. Would it make sense to get an embroidery machine and use #inkStitch (an Inkscape variant)? I’m not sure if that’s strictly for embroidery – or does that give the ability to do a variety of stitches using FOSS?

The inkstitch.org website steers people toward taking a basic sewing machine and modifying it using 3d printed parts. That’s too ambitious for me. I don’t want a hardware project. I just want to buy hardware that’s ready to go and use free software to control it. Is that possible with things that exist already?

0

Another backpack repair, part 2

preview

This is an update to this post.

I turned the backpack inside out to see the damage on the inside. Most of the black plastic coating was gone, and you can see the patch I applied in the outside.

I decided to coat pretty much the entire bottom with Shoe Goo sealant, like I did in my last repair. This gave the material a lot of extra stiffness, as well as waterproofing it. You can see it applied in the shinier areas:

Here is the sealant on the inside of the biggest rip, holding the patch in place:

I know this update isn’t particularly visually impressive, but it felt like a pretty successful fix. I’m looking forward to being able to use this bag again!

This is an update to this post.

I turned the backpack inside out to see the damage on the inside. Most of the black plastic coating was gone, and you can see the patch I applied in the outside.

I decided to coat pretty much the entire bottom with Shoe Goo sealant, like I did in my last repair. This gave the material a lot of extra stiffness, as well as waterproofing it. You can see it applied in the shinier areas:

Here is the sealant on the inside of the biggest rip, holding the patch in place:

I know this update isn’t particularly visually impressive, but it felt like a pretty successful fix. I’m looking forward to being able to use this bag again!

0

No Pattern, Adjustable, Zero-Waste 18th Century Skirt - Sewing Tutorial

preview

I’ve been looking for more adjustable closure ideas (excluding zippers and buttons) and ways to reduce my fabric cutting waste. This tutorial pointed me in the right direction!

I’ve been looking for more adjustable closure ideas (excluding zippers and buttons) and ways to reduce my fabric cutting waste. This tutorial pointed me in the right direction!

0

Yet another backpack repair

preview

This backpack has been stowed away at the back of my closet for a few months waiting to be fixed. It was being held together pretty tenuously: Sewed some of the smaller rips, then added repair tape to the largest one:

Next step will be to turn it inside out and add some more material to the large rip. The entire bottom is pretty much thin enough to let light through at this point. I’ll try to post an update once I fix that!

This backpack has been stowed away at the back of my closet for a few months waiting to be fixed. It was being held together pretty tenuously: Sewed some of the smaller rips, then added repair tape to the largest one:

Next step will be to turn it inside out and add some more material to the large rip. The entire bottom is pretty much thin enough to let light through at this point. I’ll try to post an update once I fix that!

0

Next step in the backpack repair -- new zipper pull, and a reinforced floor

preview

Zipper pull made from some shoelace I had lying around:

Parts of the bottom of the bag were threadbare (literally starting to let light through). Gooped over everything with a bunch of Shoe Goo sealant, which turned out messy but effective:

Overall I’m pretty please with how this turned out. Maybe not too pretty to look at, but thoroughly functional, and I’m sure it’ll extend the life of this bag quite a bit

Zipper pull made from some shoelace I had lying around:

Parts of the bottom of the bag were threadbare (literally starting to let light through). Gooped over everything with a bunch of Shoe Goo sealant, which turned out messy but effective:

Overall I’m pretty please with how this turned out. Maybe not too pretty to look at, but thoroughly functional, and I’m sure it’ll extend the life of this bag quite a bit

0

Stage 2 of the backpack repair

preview

Glued and sewed a larger piece of gear repair tape to add fidelity to the ripped edge: Then sewed the rip itself with fishing line (the strongest thing I could think of to hold the weight of the bag’s contents, plus I just happened to have it at home:

As of this post, I’ve been using it for a week, and it’s held up pretty well. I may add some sealant later to hold things in place.

Now all that’s left to do is replace a missing zipper pull and fix some rodent damage to the front compartment… I may post about that at a later time

Glued and sewed a larger piece of gear repair tape to add fidelity to the ripped edge: Then sewed the rip itself with fishing line (the strongest thing I could think of to hold the weight of the bag’s contents, plus I just happened to have it at home:

As of this post, I’ve been using it for a week, and it’s held up pretty well. I may add some sealant later to hold things in place.

Now all that’s left to do is replace a missing zipper pull and fix some rodent damage to the front compartment… I may post about that at a later time

0

Does this place have a sticky/newb post?

preview

Basically the title. I would love to get at least a basic working knowledge of repairs and alterations, but I have no experience whatsoever. A “questions that don’t deserve their own post” or “starting resources” thing would be very helpful. Thank you!

Basically the title. I would love to get at least a basic working knowledge of repairs and alterations, but I have no experience whatsoever. A “questions that don’t deserve their own post” or “starting resources” thing would be very helpful. Thank you!