So, now that I’m cutting again, I decided to dig through my rough and see what I could do with a piece of fire opal. The piece didn’t have a lot of fire, but I wanted to have a go at it.
Overall everything went great, good solid cut, meet points and polish. Worked to take it off the dop an an unknown flaw clipped off one edge of the stone. 😱 😭
Needless to say that really pissed me off.
So, now that I’m cutting again, I decided to dig through my rough and see what I could do with a piece of fire opal. The piece didn’t have a lot of fire, but I wanted to have a go at it.
Overall everything went great, good solid cut, meet points and polish. Worked to take it off the dop an an unknown flaw clipped off one edge of the stone. 😱 😭
This stone was cut by my son using his own design. YAG is a man made crystal used in lasers. Most YAG that cutters get comes from rejected crystal that didn’t meet specs.
None of these pictures do it justice as it had almost as much fire as my wife’s engagement ring.
This stone was cut by my son using his own design. YAG is a man made crystal used in lasers. Most YAG that cutters get comes from rejected crystal that didn’t meet specs.
None of these pictures do it justice as it had almost as much fire as my wife’s engagement ring.
Tiny orange zircon. I cut this once and was super unhappy because only a few facets would take a polish. Bought more lightning laps to give me more prepolish steps, and suddenly everything is happy. Design is Square Princess Cut by Justin K. Prim
Tiny orange zircon. I cut this once and was super unhappy because only a few facets would take a polish. Bought more lightning laps to give me more prepolish steps, and suddenly everything is happy. Design is Square Princess Cut by Justin K. Prim
This is one of the most perfect cuts I’ve managed. The meet points are all as perfect as I could get, as well as the polish. I chose a more standard round cut than what my son designed as I wanted to lighten the stone more due to the overall color saturation of the material.
I’m going to cut a second calibrated to match, and get them set for my wife.
This is one of the most perfect cuts I’ve managed. The meet points are all as perfect as I could get, as well as the polish. I chose a more standard round cut than what my son designed as I wanted to lighten the stone more due to the overall color saturation of the material.
I’m going to cut a second calibrated to match, and get them set for my wife.
My son has really started to get into faceting. He bought a boule of hydrothermal emerald(man made) as he wanted to cut a design he made specific to emerald.
He sliced the emerald in half and gave me one half while he cut his up into the sizes he was going to facet.
I was mostly hands off with this and only really helped out when his stone popped off the dop. He did a great job!
My son has really started to get into faceting. He bought a boule of hydrothermal emerald(man made) as he wanted to cut a design he made specific to emerald.
He sliced the emerald in half and gave me one half while he cut his up into the sizes he was going to facet.
I was mostly hands off with this and only really helped out when his stone popped off the dop. He did a great job!
This is one of two stones I’m cutting from a piece of morganite. This stone was started almost a month ago, and sat on the dop for weeks after I cut part of the crown and found an inclusion of bubbles that intersected a set of facets on one side looking like a fracture.
The perfectionist in me was pissed and frustrated and I walked away from the stone leaving it on the machine. I was forced to finish the stone thanks to my son who was planning on cutting a hydrothermal emerald. So I finished the stone, and you can’t even see the flaw without a loop.
I’m such an idiot and am so thankful that my son gave me a swift kick in the ass.
This is one of two stones I’m cutting from a piece of morganite. This stone was started almost a month ago, and sat on the dop for weeks after I cut part of the crown and found an inclusion of bubbles that intersected a set of facets on one side looking like a fracture.
The perfectionist in me was pissed and frustrated and I walked away from the stone leaving it on the machine. I was forced to finish the stone thanks to my son who was planning on cutting a hydrothermal emerald. So I finished the stone, and you can’t even see the flaw without a loop.
I’m such an idiot and am so thankful that my son gave me a swift kick in the ass.
So my son, who is studying engineering, has gotten into faceting due to the math/science behind optimizing a cut. He designed this in GemCad Studio, and cut this stone this last weekend. Turned out incredible, and I wanted to share.
So my son, who is studying engineering, has gotten into faceting due to the math/science behind optimizing a cut. He designed this in GemCad Studio, and cut this stone this last weekend. Turned out incredible, and I wanted to share.
Design is Trifectancy, by Andrew Brown. This was much larger but the culet decided to stay behind in the cone dop, forcing me to start over. Still, I love how affordable this stuff is, and it always looks nice.
Design is Trifectancy, by Andrew Brown. This was much larger but the culet decided to stay behind in the cone dop, forcing me to start over. Still, I love how affordable this stuff is, and it always looks nice.
Cheap bit of tourmaline but I’m happy how it turned out. The c axis didn’t look this closed when I picked the design, but I probably should have done something to hide that, whoops. Design is Emerald Cut by Justin K Prim.
Cheap bit of tourmaline but I’m happy how it turned out. The c axis didn’t look this closed when I picked the design, but I probably should have done something to hide that, whoops. Design is Emerald Cut by Justin K Prim.
I’ve got several very pale, quite long aquamarine crystals, and wanted to do something interesting with one of them.
The design is Blue Ice, by Jeff Graham. Long facets are a pig to polish, I don’t know why I keep picking them.
I’m pretty happy with this, although I mistakenly overcut a facet by quite a bit, making me lose most of the girdle.
I’ve got several very pale, quite long aquamarine crystals, and wanted to do something interesting with one of them.
The design is Blue Ice, by Jeff Graham. Long facets are a pig to polish, I don’t know why I keep picking them.
I’m pretty happy with this, although I mistakenly overcut a facet by quite a bit, making me lose most of the girdle.
I’ve been looking at this large morganite rough and trying to decide how to cut this. It’s sort of in the shape of a triangular prism, but it narrows towards one end.
I was leaning towards slicing it in three and creating a matching set of trillian stones. The other alternative I’m contemplating is a matching set of square/princess cut stones optimized for this stone.
Interested if anyone has some other alternatives or opinions.
I’ve been looking at this large morganite rough and trying to decide how to cut this. It’s sort of in the shape of a triangular prism, but it narrows towards one end.
I was leaning towards slicing it in three and creating a matching set of trillian stones. The other alternative I’m contemplating is a matching set of square/princess cut stones optimized for this stone.
Interested if anyone has some other alternatives or opinions.
To celebrate a year of doing the most expensive hobby ever, I tried my hand at doing a Portuguese cut. Sadly the veils weren’t obvious until I started cutting, but I hate throwing things away so I just followed through to the end. Design is Round Portuguese Cut by Justin K. Prim, in amethyst
To celebrate a year of doing the most expensive hobby ever, I tried my hand at doing a Portuguese cut. Sadly the veils weren’t obvious until I started cutting, but I hate throwing things away so I just followed through to the end. Design is Round Portuguese Cut by Justin K. Prim, in amethyst
My first scapolite, in Trioptic Blast by Andrew Brown. I was expecting a lot more trouble with this, due to cleavage planes, but it was actually a joy to cut
My first scapolite, in Trioptic Blast by Andrew Brown. I was expecting a lot more trouble with this, due to cleavage planes, but it was actually a joy to cut
Bit of an experimental one, in my own design. Chunky bloodstone, cut from my stock of cabbing stuff. This guy decided to yeet off of the dop, but I managed to save it with superglue. Still, it’s made the table a touch wonky.
Bit of an experimental one, in my own design. Chunky bloodstone, cut from my stock of cabbing stuff. This guy decided to yeet off of the dop, but I managed to save it with superglue. Still, it’s made the table a touch wonky.
Teeny tiny peridot. It was a very cheap bit of rough for around £1, so I’m amazed I managed to get anything out of it at all. Still, I’m happy with the result and have a bit more experience with stuff that needs Aluminium Oxide to polish. Design is Emerald by Justin K. Prim
Teeny tiny peridot. It was a very cheap bit of rough for around £1, so I’m amazed I managed to get anything out of it at all. Still, I’m happy with the result and have a bit more experience with stuff that needs Aluminium Oxide to polish. Design is Emerald by Justin K. Prim
A heavily included bit of green tourmaline (my first!) in a simple square cut. You can see the different colours through different angles, which I didn’t realise before I cut it!
Design is Square Cut by Justin K. Prim
A heavily included bit of green tourmaline (my first!) in a simple square cut. You can see the different colours through different angles, which I didn’t realise before I cut it!
Design is Square Cut by Justin K. Prim
My first stab at a spinel. I think the cut is probably not great for a stone this size, and I’m not sure if it’s hazy due to a bad polish, the weird design, or the stone just not being super clear. Design is Time Portal by Andrew Brown
My first stab at a spinel. I think the cut is probably not great for a stone this size, and I’m not sure if it’s hazy due to a bad polish, the weird design, or the stone just not being super clear. Design is Time Portal by Andrew Brown
Got my machine back, and it runs great! The motor is even quieter than it was before. This will be my first stone, a nice clean peridot that is 11mm x 9mm.
Got my machine back, and it runs great! The motor is even quieter than it was before. This will be my first stone, a nice clean peridot that is 11mm x 9mm.
Social media keeps trying to sell me faceted moss agate jewelry, so I had a stab at cutting some myself. The stone is a bit too thick with moss (I can now see why the ads are for stuff that is tiny!) but it was a fun experiment.
Social media keeps trying to sell me faceted moss agate jewelry, so I had a stab at cutting some myself. The stone is a bit too thick with moss (I can now see why the ads are for stuff that is tiny!) but it was a fun experiment.
This was another stone from the way back machine that I still have laying around. I don’t recall what the cut was, but my best guess is a standard portuguese cut.
My machine is on it’s way to get repaired, they said 2-3 weeks. Shipping cost was more than I care to admit.
This was another stone from the way back machine that I still have laying around. I don’t recall what the cut was, but my best guess is a standard portuguese cut.
My machine is on it’s way to get repaired, they said 2-3 weeks. Shipping cost was more than I care to admit.