#imadethis

posts tagged #imadethis

0

Graphic I made for a future college station radio show

preview

I’m not formally a designer, but I’ve had an idea for this graphic since like May of this year so today I spent five hours trying to get that idea into existence, and it turned out better than I thought it would!! I wasn’t expecting it to look at all cohesive but I think it turned out decently cohesive.

Workflow (free!):

3D text made in womp.com (on the free trial) using the fonts cageroll cage and cageroll roll

layout, effects, and touch-ups in photogimp

dithering and effects added using effect.app

Adobe Firefly used for generative fill

text added in photogimp using neutral face

Bonus graphic:

I’m not formally a designer, but I’ve had an idea for this graphic since like May of this year so today I spent five hours trying to get that idea into existence, and it turned out better than I thought it would!! I wasn’t expecting it to look at all cohesive but I think it turned out decently cohesive.

Workflow (free!):

3D text made in womp.com (on the free trial) using the fonts cageroll cage and cageroll roll

layout, effects, and touch-ups in photogimp

dithering and effects added using effect.app

Adobe Firefly used for generative fill

text added in photogimp using neutral face

Bonus graphic:

0

Jewelry Price Numbers

preview

cross-posted from: infosec.pub/post/54835521

A friend who runs a local guitar store found that price numbers like these normally come as sets that leaves you with multiples of less-used numbers (and you have to pay for the whole set if you just need a few of the numbers). So, I made these:

printables.com/…/1895482-jewelry-price-numbers

cross-posted from: infosec.pub/post/54835521

A friend who runs a local guitar store found that price numbers like these normally come as sets that leaves you with multiples of less-used numbers (and you have to pay for the whole set if you just need a few of the numbers). So, I made these:

printables.com/…/1895482-jewelry-price-numbers

0

A MIDI website I loved got slopified, so I brought it back!

preview

www.furbnet.com/index.iva

It aims to recreate the old HamieNET site, with period-correct extra features.

You can read more about what the site is and what drove me to recreate it on the about page.

I will also occasionally post development updates, as well as other (related and unrelated) miscellany to my PeerTube channel, which can be followed from your fediverse platform of choice (including probably the one you’re reading this on!) !furbland_channel@cuddly.tube

If anyone has any questions or comments, or is at all curious about the inner workings of the site/parts I’m particularly proud of, don’t hesitate to leave a comment! :D

www.furbnet.com/index.iva

It aims to recreate the old HamieNET site, with period-correct extra features.

You can read more about what the site is and what drove me to recreate it on the about page.

I will also occasionally post development updates, as well as other (related and unrelated) miscellany to my PeerTube channel, which can be followed from your fediverse platform of choice (including probably the one you’re reading this on!) !furbland_channel@cuddly.tube

If anyone has any questions or comments, or is at all curious about the inner workings of the site/parts I’m particularly proud of, don’t hesitate to leave a comment! :D

0

World is Over Album

preview

Wrote this album, it’s very special to me.

It’s the last album I wrote with FL before I stopped using it because fuck ai.

https://waow.bandcamp.com/album/the-world-is-over-im-finally-awake

Wrote this album, it’s very special to me.

It’s the last album I wrote with FL before I stopped using it because fuck ai.

https://waow.bandcamp.com/album/the-world-is-over-im-finally-awake

0

Simple Beading: updating an old and making a new necklace

preview

I broke the clasp of the first one, so I went in an added the tiger’s eye + carnelian part that was just laying around. The earrings were made for the original chain, but fortunately they still work.

And because it took a whole mess to repair/face lift the wooden one, I decided to replace an other one that I misplaced. The funny thing that it is misplaced because when I tried to find the earrings, they were gone also.

This one is glass, quartz crystal and probably the tiny ones are just quartz also. Now I either find the missing one, or I have “no choice” and have to make some earrings also :)

I broke the clasp of the first one, so I went in an added the tiger’s eye + carnelian part that was just laying around. The earrings were made for the original chain, but fortunately they still work.

And because it took a whole mess to repair/face lift the wooden one, I decided to replace an other one that I misplaced. The funny thing that it is misplaced because when I tried to find the earrings, they were gone also.

This one is glass, quartz crystal and probably the tiny ones are just quartz also. Now I either find the missing one, or I have “no choice” and have to make some earrings also :)

0

I made https://sciencefind.org/ - discover science wikipedia articles and learn something new

preview

I’ve been slowly building sciencefind.org without the use of AI. It has a random science article button, as well as a wide variety of science categories where you can discover different wikipedia articles about that specific category. Feedback really appreciated.

I’ve been slowly building sciencefind.org without the use of AI. It has a random science article button, as well as a wide variety of science categories where you can discover different wikipedia articles about that specific category. Feedback really appreciated.

0

Tiki God scroll

preview

11 x 17 coffee stained print
There are no digital enhancements to this image.
I sell these if anyone’s interested at etsy.me/4xmcvIW
I will also be selling these at the Big Tiki Woo-Woo in Ventura, CA, on Oct. 2nd - tickets available here: tinyurl.com/28bfdw5

11 x 17 coffee stained print
There are no digital enhancements to this image.
I sell these if anyone’s interested at etsy.me/4xmcvIW
I will also be selling these at the Big Tiki Woo-Woo in Ventura, CA, on Oct. 2nd - tickets available here: tinyurl.com/28bfdw5

0

I made a Corsi-Rosentha air filter

The photo shows a Corsi-Rosethan box. A Corsi–Rosenthal Box is a do-it-yourself air purifier that can be built with four HVAC particulate air filters to form an enclosure. A fan attached to the top draws air through the filters and the seams of the box are sealed with tape.
preview

Granted, I used a blower fan as instead of the box fan the canonical design uses.

Due to a series of unfortunate events, we’ve found ourselves with a reasonably clean basement. One of my wife’s biggest complaints about the basement had always been dust. Dust from my very infrequently used wood-shop. Dust from the litter box. Dust from… well, dust.

The new basement seemed like a good excuse to take a crack at the dust situation and this design sprung into mind.

I built it with four 16x25 MERV 11 filters, some plywood, some 1x4s, some plumber’s tape to hold the fan in place, and the aforementioned blower fan. I could have gone for a higher MERV rating, but I didn’t feel the need to go super overboard. I can also crank the fan for multiple consecutive passes. That’s the whole idea of the design after all.

The box itself is only held together with tape and the weight of the fan. Now that the basement is more together I might model and print some brackets to make the box more solid.

One cheap motion sensor plug later and the air down there is honestly pretty fresh

Granted, I used a blower fan as instead of the box fan the canonical design uses.

Due to a series of unfortunate events, we’ve found ourselves with a reasonably clean basement. One of my wife’s biggest complaints about the basement had always been dust. Dust from my very infrequently used wood-shop. Dust from the litter box. Dust from… well, dust.

The new basement seemed like a good excuse to take a crack at the dust situation and this design sprung into mind.

I built it with four 16x25 MERV 11 filters, some plywood, some 1x4s, some plumber’s tape to hold the fan in place, and the aforementioned blower fan. I could have gone for a higher MERV rating, but I didn’t feel the need to go super overboard. I can also crank the fan for multiple consecutive passes. That’s the whole idea of the design after all.

The box itself is only held together with tape and the weight of the fan. Now that the basement is more together I might model and print some brackets to make the box more solid.

One cheap motion sensor plug later and the air down there is honestly pretty fresh

0

My Nokia 7110 is online

preview

I finally finished a months long project consisting of a lot of research and help by a wonderful community.

I recently bought this Nokia 7110 because i thought the spring loaded keyboard cover is the coolest thing ever.

Apprently it’s the first phone ever with a WAP Browser and it connects via CSD (Circuit-Switched-Data - basically calling a modem that transfers data via sound on the phone line)

This technology is basically dead in the big 26.

Over at r/vintagemobilephones i found an enthusiastic community that keeps these devices alive.

A user named bs0dd wrote a comprehensive guide on how to set up a WAP gateway and a CSD dial-in number.

I went through many SIM-cards to test it but ultimately failed at setting up the dial-in.

Through dumb luck Reddit user 15pmm01 realized that there’s still a working dial-in number in Poland of all places.

As soon as that worked the fun began.

I immediately set up discord-wap and vibe-coded a Singal-CLI bridge, which gives this phone all abilities I wouldn’t want to miss on the go. (Apart from Navigation, a Camera… yknow xD)

So yea… i am rlly happy this took an end.

I’m about to set up my own WAP Services and have fun with it :D

I finally finished a months long project consisting of a lot of research and help by a wonderful community.

I recently bought this Nokia 7110 because i thought the spring loaded keyboard cover is the coolest thing ever.

Apprently it’s the first phone ever with a WAP Browser and it connects via CSD (Circuit-Switched-Data - basically calling a modem that transfers data via sound on the phone line)

This technology is basically dead in the big 26.

Over at r/vintagemobilephones i found an enthusiastic community that keeps these devices alive.

A user named bs0dd wrote a comprehensive guide on how to set up a WAP gateway and a CSD dial-in number.

I went through many SIM-cards to test it but ultimately failed at setting up the dial-in.

Through dumb luck Reddit user 15pmm01 realized that there’s still a working dial-in number in Poland of all places.

As soon as that worked the fun began.

I immediately set up discord-wap and vibe-coded a Singal-CLI bridge, which gives this phone all abilities I wouldn’t want to miss on the go. (Apart from Navigation, a Camera… yknow xD)

So yea… i am rlly happy this took an end.

I’m about to set up my own WAP Services and have fun with it :D

0

Goldar scroll

preview

cross-posted from: lemmy.world/post/51039107

cross-posted from: lemmy.world/post/51038772

11 x 17 coffee stained print.
There are no digital enhancements to this immage.
The text says “Griffozar” in Japanese, which is the character’s name in Kyōryū Sentai Zyuranger
I sell copies of this if anyone’s interested.
Enjoy!

cross-posted from: lemmy.world/post/51039107

cross-posted from: lemmy.world/post/51038772

11 x 17 coffee stained print.
There are no digital enhancements to this immage.
The text says “Griffozar” in Japanese, which is the character’s name in Kyōryū Sentai Zyuranger
I sell copies of this if anyone’s interested.
Enjoy!

0

I wrote two upbeat heist fantasy books set in the Sumerian afterlife

To Rob a God jessekaukonen.net
preview

I’ve written about 8 books so far, but these are the ones I considered good enough to publish.

If you want, you can download them for free on the “piracy policy” page.

I’ve written about 8 books so far, but these are the ones I considered good enough to publish.

If you want, you can download them for free on the “piracy policy” page.

0

Farwoods: 2026 Alpha Trailer & Second Playtest Period

play · youtube.com
YouTube Farwoods 2026 Alpha Trailer www.youtube.com
preview

Hello everyone! We are proud to announce that the next Farwoods test period will begin on August 18th, 2026 at 8pm EDT. We have a huge amount of new content, features, and polish for you on an all-new client rewritten in Godot. Save the date, we hope to see you there!

What is Farwoods?

Farwoods is a “graphical MUD,” an older style of MMO that mixes sandbox game mechanics with a roleplay community to create an immersive living world inspired by Redwall. It’s similar to a big, always-running D&D game that people drop in and out of. We have been working on the game since 2020 and next month, we will be bringing it back for people to try out and help us test all the changes we’ve made.

Farwoods is designed as a prosocial game where other people’s characters are part of the experience, as opposed to the antisocial theme park MMO style where there is a set story in which you are the protagonist in a largely on-rails experience, and forming connections with anyone else playing the game is purely optional.

If the idea of creating characters to play in a fantasy, Redwall-inspired world of magic and intrigue excites you, come check us out!

Hello everyone! We are proud to announce that the next Farwoods test period will begin on August 18th, 2026 at 8pm EDT. We have a huge amount of new content, features, and polish for you on an all-new client rewritten in Godot. Save the date, we hope to see you there!

What is Farwoods?

Farwoods is a “graphical MUD,” an older style of MMO that mixes sandbox game mechanics with a roleplay community to create an immersive living world inspired by Redwall. It’s similar to a big, always-running D&D game that people drop in and out of. We have been working on the game since 2020 and next month, we will be bringing it back for people to try out and help us test all the changes we’ve made.

Farwoods is designed as a prosocial game where other people’s characters are part of the experience, as opposed to the antisocial theme park MMO style where there is a set story in which you are the protagonist in a largely on-rails experience, and forming connections with anyone else playing the game is purely optional.

If the idea of creating characters to play in a fantasy, Redwall-inspired world of magic and intrigue excites you, come check us out!

0

Evening Jam 19 - Sunset - Korg Nts-4, Roland S1, Micromonsta 2, Volca Drum, Bastl FX wizard, NTS-3. - YouTube

play · youtube.com
YouTube Evening Jam 19 - Sunset - Korg Nts-4, Roland S1, Micromonsta 2, Volca Drum, Bastl FX wizard, NTS-3. youtu.be
preview

Not a lot of time to prepare this one as I wanted to catch the sunset as well.

Lets call it a continuation of my glitchy drums experiment, with more to come. :)

Not a lot of time to prepare this one as I wanted to catch the sunset as well.

Lets call it a continuation of my glitchy drums experiment, with more to come. :)

0

Evening Jam 18 - Calm Smmer Jam - Dirtywave M8, Ukulele, Sonicake Pocket Master, Korg NTS-4 Mixer. - YouTube

play · youtube.com
YouTube Evening Jam 18 - Calm Summer Jam - Dirtywave M8, Ukulele, Sonicake Pocket Master, Korg NTS-4 Mixer. youtu.be
preview

cross-posted from: lemmy.world/post/49772793

cross-posted from: lemmy.world/post/49772791

A bit more simple this time since I’m on holiday. Ukulele and reverb+delay can make for some great ambience.

Hope everyone are having a nice summer. :)

First time trying out the NTS-4 as a audio interface, mainly since the M8 is glitchy when streaming directly to my Phone.

Uke is amplified by and running through reverb+delay on the sonicake.

cross-posted from: lemmy.world/post/49772793

cross-posted from: lemmy.world/post/49772791

A bit more simple this time since I’m on holiday. Ukulele and reverb+delay can make for some great ambience.

Hope everyone are having a nice summer. :)

First time trying out the NTS-4 as a audio interface, mainly since the M8 is glitchy when streaming directly to my Phone.

Uke is amplified by and running through reverb+delay on the sonicake.

0

I made a game. It is short adventure about bying bread during the war. It is free to play. And i am looking for feedback.

preview

Hi. I am new to Lemmy. Only found out about it yesterday. One person told me about this place and advised to share the game here, saying that this community is less prejudiced and more likely to give feedback about game as an experience, instead of tools it was built with. I am mostly looking for feedback about the story and direction, since my main skill is writing and telling a story.

The game’s story tells a story about life away from the front during wartime. There’s no heroism or victories, and all you need to do is go to the store and buy some bread, listening to the protagonist’s reflections on this conflict and how it changes the lives of everyone it touches. In this game, only one character has a name—and that’s no coincidence, as they’re all “nameless,” the ones who won’t be mentioned in the news, talked about, or likely even remembered. But each of them has their own life with dreams, fears, and hopes, and despite the bombings, they try to live on.

The story is fully fictional, but, as some might have quessed - are inspired by my life in Ukraine. Though, i think that the things i speak about are universal for any conflict.

This is an adventure game, also known as a “walking simulator.” You probably could also quess that from the name) There are some interactive elements, but not many, so it’s not for those who enjoy active gameplay. You’ll mostly be reading or listening to the main character’s monologues, and dialogues with various oddballs, walking, and completing small tasks.

The game also has three hidden endings. If you’re interested in unlocking them, I’ll give you a hint: when you enter the city, go left, look for a note, and… start counting. If your count is correct, the condition can be fulfilled on a second playthrough.

The game is completely free: it’s too short to put a price tag on it, and I generally don’t like doing that. Plus, this is likely my last game, and I don’t have much life left in me, so there’s no point in thinking about the future. However, for those who really want to support me, there are support packs. Since I hate microtransactions, they don’t contain any in-game content, only bonuses like the soundtrack.

If the game is in English and you want to switch to Ukrainian (or vice versa), right-click on it in the library, select “Properties,” and the first menu will offer an option to switch languages.

That’s all for now, thank you for your attention. I welcome any feedback—both general impressions and detailed analyses—if anyone is interested in sharing their opinions. You can leave them here, but it’s better to leave them in Steam reviews so everyone who considers to play the game can read them too.

Also, if you know where else game can be shared, I’ll be glad if you do, since I don’t have money for advertising, and the game is not commercial, so simply talking about it is the only way to let people know that it even exists.

Hi. I am new to Lemmy. Only found out about it yesterday. One person told me about this place and advised to share the game here, saying that this community is less prejudiced and more likely to give feedback about game as an experience, instead of tools it was built with. I am mostly looking for feedback about the story and direction, since my main skill is writing and telling a story.

The game’s story tells a story about life away from the front during wartime. There’s no heroism or victories, and all you need to do is go to the store and buy some bread, listening to the protagonist’s reflections on this conflict and how it changes the lives of everyone it touches. In this game, only one character has a name—and that’s no coincidence, as they’re all “nameless,” the ones who won’t be mentioned in the news, talked about, or likely even remembered. But each of them has their own life with dreams, fears, and hopes, and despite the bombings, they try to live on.

The story is fully fictional, but, as some might have quessed - are inspired by my life in Ukraine. Though, i think that the things i speak about are universal for any conflict.

This is an adventure game, also known as a “walking simulator.” You probably could also quess that from the name) There are some interactive elements, but not many, so it’s not for those who enjoy active gameplay. You’ll mostly be reading or listening to the main character’s monologues, and dialogues with various oddballs, walking, and completing small tasks.

The game also has three hidden endings. If you’re interested in unlocking them, I’ll give you a hint: when you enter the city, go left, look for a note, and… start counting. If your count is correct, the condition can be fulfilled on a second playthrough.

The game is completely free: it’s too short to put a price tag on it, and I generally don’t like doing that. Plus, this is likely my last game, and I don’t have much life left in me, so there’s no point in thinking about the future. However, for those who really want to support me, there are support packs. Since I hate microtransactions, they don’t contain any in-game content, only bonuses like the soundtrack.

If the game is in English and you want to switch to Ukrainian (or vice versa), right-click on it in the library, select “Properties,” and the first menu will offer an option to switch languages.

That’s all for now, thank you for your attention. I welcome any feedback—both general impressions and detailed analyses—if anyone is interested in sharing their opinions. You can leave them here, but it’s better to leave them in Steam reviews so everyone who considers to play the game can read them too.

Also, if you know where else game can be shared, I’ll be glad if you do, since I don’t have money for advertising, and the game is not commercial, so simply talking about it is the only way to let people know that it even exists.

0

Repaired a dead VT320 serial terminal from the 80s

VT320 terminal showing a successful self-test with "VT320 OK"
preview

A few months ago, I was gifted a non-operational DEC VT320 serial terminal. This is a 80s/90s text-only CRT monitor, which was only displaying a thin vertical line rather than a proper picture. I’ve done some electronics repair in the past, but nothing this old or involving a high-voltage tube. But I figure that it would make for an interesting project over the summer, whether or not I can recover it. If nothing else, it is quite a retro talking piece.

Fortunately, DEC – aka Digital Equipment Corporation– made a lot of these things, and also published troves of service information, which was the norm back then (#RightToRepair). Among the documents that can be found online included the schematics, which would be of incredible aid. That said, the quality of the scan is pretty poor, and it took quite a bit of cross-referencing of component identifiers with the parts list to confirm what couldn’t be read.

Before opening up the monitor, I did some preparatory research, to identify areas which would be worthwhile to investigate, and also to make sure I’m not going to shock myself in the process. My findings showed that because the CRT was able to display something beyond a single dot in the center of the screen, the issue would not be in the high-voltage generation circuitry, but rather the downstream circuits. Specifically, in the horizontal deflector path; this explains why the only image is a vertical line, because horizontal control was lost.

Using the field replacement guide, I got the monitor open and then discharged the anode using a screwdriver attached to the ground strap. There was no spark or sound, which can happen if the bleeder resistor was still intact. A good sign as to what’s probably still working in this monitor, but I take no unnecessary risks around potentially high voltage.

The innards were reasonably laid out, basically existing as components that adorn the CRT display itself. The PSU, main board, and “arc protection” board were all easy to identify, although the latter was more like a connector than a board. I quickly ruled out the PSU by checking its output voltages, so the issue must be on the main board.

logic board of VT320 from above, unobstructed by the picture tube

It took a while to extract the board, since I didn’t want to break any of the 40-year old plastic clips. But once out, I began matching the board to the diagrams and examining for any obvious damage. No obviously blown caps, no evidence of thermal events, no components rolling around on the bottom.

At this point, I stopped to do some very thorough circuit analysis of the circuit diagrams, to absolutely understand what I was going to do. This actually took two tries, since each attempt revealed faults in my understanding, and I had to go back to the thinking chair. This part took a few days, until I finally internalized the circuit’s behavior. As it turns out, this wasn’t necessary, and I’ll probably include it as a later comment, just for posterity.

When I returned to the board, I made a plan to solder some trace wires, to verify my expectations when powered on. And indeed, after reinstalling the board, my oscilloscope confirmed that the H sync signal was intact and the power transistor was functioning as expected.

oscilloscope traces, one showing a square wave pulse for 35 ms with amplitude of 4 volts, and another trace showing a single distorted sine pulse lasting 10 ms with peak amplitude of 200 volts

Narrowing the search, I took the board back out and started tracing the lines on the PCB surface – it was fortunately only a two-sided board – and then compared my observations to the schematics. This revealed a difference, where the Horizontal Linearity inductor (H-LIN) was not showing connectivity, despite visibly being attached to the trace.

Closer examination revealed that of the inductor’s three legs – two for electrical connections, one extra for support – one had developed a hairline fault. This physical damage broke continuity, likely from the shock of impacting something. I made a repair by constructing a wooden splint for physical support, and then soldered over the leg for electrical connectivity.

a tall inductor supported by wood splints, marked as H-LIN

For good measure, I completed the exercise of verifying all other components, which showed that all other resistors, capacitors, and connectors were intact and likely working. And with that, I reassembled and powered on the monitor to see.

monitor displaying: VT320 OK, Firmware and Set-Up Screens Copyright  C 1997, Digital Equipment Corporation

And it works! In total, I probably spent a week on-and-off working on this. I will say that this is a strange machine to have, since I’ve been able to hook it up to a modern Linux machine and use it as a serial TTY. I even wrote most of the text of this post in vim.

a VT320 terminal with vim open

A few months ago, I was gifted a non-operational DEC VT320 serial terminal. This is a 80s/90s text-only CRT monitor, which was only displaying a thin vertical line rather than a proper picture. I’ve done some electronics repair in the past, but nothing this old or involving a high-voltage tube. But I figure that it would make for an interesting project over the summer, whether or not I can recover it. If nothing else, it is quite a retro talking piece.

Fortunately, DEC – aka Digital Equipment Corporation– made a lot of these things, and also published troves of service information, which was the norm back then (#RightToRepair). Among the documents that can be found online included the schematics, which would be of incredible aid. That said, the quality of the scan is pretty poor, and it took quite a bit of cross-referencing of component identifiers with the parts list to confirm what couldn’t be read.

Before opening up the monitor, I did some preparatory research, to identify areas which would be worthwhile to investigate, and also to make sure I’m not going to shock myself in the process. My findings showed that because the CRT was able to display something beyond a single dot in the center of the screen, the issue would not be in the high-voltage generation circuitry, but rather the downstream circuits. Specifically, in the horizontal deflector path; this explains why the only image is a vertical line, because horizontal control was lost.

Using the field replacement guide, I got the monitor open and then discharged the anode using a screwdriver attached to the ground strap. There was no spark or sound, which can happen if the bleeder resistor was still intact. A good sign as to what’s probably still working in this monitor, but I take no unnecessary risks around potentially high voltage.

The innards were reasonably laid out, basically existing as components that adorn the CRT display itself. The PSU, main board, and “arc protection” board were all easy to identify, although the latter was more like a connector than a board. I quickly ruled out the PSU by checking its output voltages, so the issue must be on the main board.

logic board of VT320 from above, unobstructed by the picture tube

It took a while to extract the board, since I didn’t want to break any of the 40-year old plastic clips. But once out, I began matching the board to the diagrams and examining for any obvious damage. No obviously blown caps, no evidence of thermal events, no components rolling around on the bottom.

At this point, I stopped to do some very thorough circuit analysis of the circuit diagrams, to absolutely understand what I was going to do. This actually took two tries, since each attempt revealed faults in my understanding, and I had to go back to the thinking chair. This part took a few days, until I finally internalized the circuit’s behavior. As it turns out, this wasn’t necessary, and I’ll probably include it as a later comment, just for posterity.

When I returned to the board, I made a plan to solder some trace wires, to verify my expectations when powered on. And indeed, after reinstalling the board, my oscilloscope confirmed that the H sync signal was intact and the power transistor was functioning as expected.

oscilloscope traces, one showing a square wave pulse for 35 ms with amplitude of 4 volts, and another trace showing a single distorted sine pulse lasting 10 ms with peak amplitude of 200 volts

Narrowing the search, I took the board back out and started tracing the lines on the PCB surface – it was fortunately only a two-sided board – and then compared my observations to the schematics. This revealed a difference, where the Horizontal Linearity inductor (H-LIN) was not showing connectivity, despite visibly being attached to the trace.

Closer examination revealed that of the inductor’s three legs – two for electrical connections, one extra for support – one had developed a hairline fault. This physical damage broke continuity, likely from the shock of impacting something. I made a repair by constructing a wooden splint for physical support, and then soldered over the leg for electrical connectivity.

a tall inductor supported by wood splints, marked as H-LIN

For good measure, I completed the exercise of verifying all other components, which showed that all other resistors, capacitors, and connectors were intact and likely working. And with that, I reassembled and powered on the monitor to see.

monitor displaying: VT320 OK, Firmware and Set-Up Screens Copyright  C 1997, Digital Equipment Corporation

And it works! In total, I probably spent a week on-and-off working on this. I will say that this is a strange machine to have, since I’ve been able to hook it up to a modern Linux machine and use it as a serial TTY. I even wrote most of the text of this post in vim.

a VT320 terminal with vim open

0

I made a system to quickly publish authenticated Markdown Web sites

preview

I made a system for people to quickly publish cryptographically authenticated Web sites using Markdown and CSS.

There’s no need to share any PII, just generate a keypair and go. Custom domains or subdomains on jot.run are supported. Free of charge. Open source.

I built this because it’s something I wanted to use for personal documentation and note taking, as well as learning more about and getting used to Rust.

Happy to have any feedback positive or negative.

EDIT: Only Linux is currently supported. Let me know if you have interest in another OS and I’ll look into it.

I made a system for people to quickly publish cryptographically authenticated Web sites using Markdown and CSS.

There’s no need to share any PII, just generate a keypair and go. Custom domains or subdomains on jot.run are supported. Free of charge. Open source.

I built this because it’s something I wanted to use for personal documentation and note taking, as well as learning more about and getting used to Rust.

Happy to have any feedback positive or negative.

EDIT: Only Linux is currently supported. Let me know if you have interest in another OS and I’ll look into it.

0

Leather needle case

preview

cross-posted from: lemmy.blahaj.zone/post/45002872

Over a year ago I posted a needle pouch I had made, I still use this all the time but there were always a few elements I wasn’t overly keen on. So when my friend’s birthday was approaching I wanted to make her something and she is a keen cross stitcher, so I thought about making her a case like mine which she had seen and liked before.

So I set about making my own variation on the original pattern, it is mostly subtle, mostly just tweaking a few measurements but also to add a closure to it.

I also took the opportunity to add my favourite design feature, the X stitch that I use to combine two different pieces of leather to create a bit more visual interest.

The straps were a new idea for me, I could have done a standard snap closure like I’ve done a million times before, or I could have attached some straps and snaps directly to it but I do like making some sightly odd features sometimes and I liked the idea of a strap that loops around and attaches to itself. This meant I only needed one rivet to attach the strap to the body and the snaps could both be added to the strap. One benefit of this, with the time pressure I was under to finish it, was that had I messed up installing the snaps, I wasn’t going to damage the otherwise finished case. I also didn’t have to design and plan for the attachment points during the process. Is it the most practical closure? No. But do I like it as a bit of a quirky thing? Absolutely. One funny effect of this is that it ended up looking like some weird creature, particularly when open with the straps extended!

It all came together pretty easily, nothing exactly complicated in the construction other than some really awkward stitch spacing on the pockets, I really need to start designing things with the stitch spacing in mind - my 3.8mm chisels are just a bit awkward in that sense…

So yeah, very pleased with the outcome and she was really happy with her gift!

cross-posted from: lemmy.blahaj.zone/post/45002872

Over a year ago I posted a needle pouch I had made, I still use this all the time but there were always a few elements I wasn’t overly keen on. So when my friend’s birthday was approaching I wanted to make her something and she is a keen cross stitcher, so I thought about making her a case like mine which she had seen and liked before.

So I set about making my own variation on the original pattern, it is mostly subtle, mostly just tweaking a few measurements but also to add a closure to it.

I also took the opportunity to add my favourite design feature, the X stitch that I use to combine two different pieces of leather to create a bit more visual interest.

The straps were a new idea for me, I could have done a standard snap closure like I’ve done a million times before, or I could have attached some straps and snaps directly to it but I do like making some sightly odd features sometimes and I liked the idea of a strap that loops around and attaches to itself. This meant I only needed one rivet to attach the strap to the body and the snaps could both be added to the strap. One benefit of this, with the time pressure I was under to finish it, was that had I messed up installing the snaps, I wasn’t going to damage the otherwise finished case. I also didn’t have to design and plan for the attachment points during the process. Is it the most practical closure? No. But do I like it as a bit of a quirky thing? Absolutely. One funny effect of this is that it ended up looking like some weird creature, particularly when open with the straps extended!

It all came together pretty easily, nothing exactly complicated in the construction other than some really awkward stitch spacing on the pockets, I really need to start designing things with the stitch spacing in mind - my 3.8mm chisels are just a bit awkward in that sense…

So yeah, very pleased with the outcome and she was really happy with her gift!

0

The Brotherhood is now open-access!!

preview

cross-posted from: lemmy.zip/post/67142082

The first release of The Brotherhood is officially out. This is the Architech. It’s still not production tested. But it’s open-access for the first time. Make some graphs, share with your friends, and track your journey across it. Let the wikipedia of pedagogy begin!!

It’s an open-source software that you can use to build obsidian-like knowledge graphs. But unlike obsidian, this is community-built like wikipedia. And it also has git-like forking abilities built in for every graph. All graphs are released under CC BY-SA. Go to our website for more details.

Upcoming features would include -

  1. More workspace features
  2. Complex assessment methods
  3. Work allocation algorithms
  4. Federated hosting
  5. Social hub

Here are some screenshots from this version workspace Academia Library Vision

cross-posted from: lemmy.zip/post/67142082

The first release of The Brotherhood is officially out. This is the Architech. It’s still not production tested. But it’s open-access for the first time. Make some graphs, share with your friends, and track your journey across it. Let the wikipedia of pedagogy begin!!

It’s an open-source software that you can use to build obsidian-like knowledge graphs. But unlike obsidian, this is community-built like wikipedia. And it also has git-like forking abilities built in for every graph. All graphs are released under CC BY-SA. Go to our website for more details.

Upcoming features would include -

  1. More workspace features
  2. Complex assessment methods
  3. Work allocation algorithms
  4. Federated hosting
  5. Social hub

Here are some screenshots from this version workspace Academia Library Vision

0

Azathoth Scroll [OC]

preview

cross-posted from: lemmy.world/post/47765950

Some time back I got a comission to create an Azathoth scroll with some bloodstains and “Madman” writing as a prop for a Dnd campagin, so this is what I came up with. Scroll is 11 x 17 inches, coffee stained print with red acryllic paint. There are no digital enhancements to this image. I sell stuff like this if anyone’s interested: tinyurl.com/ypy8mdb5

cross-posted from: lemmy.world/post/47765950

Some time back I got a comission to create an Azathoth scroll with some bloodstains and “Madman” writing as a prop for a Dnd campagin, so this is what I came up with. Scroll is 11 x 17 inches, coffee stained print with red acryllic paint. There are no digital enhancements to this image. I sell stuff like this if anyone’s interested: tinyurl.com/ypy8mdb5

0

I made a bike trailer to help me haul bikes

preview

I built this using a cheap bike trailer for hauling kids that I picked up off the curb and an old steel bed frame.

The idea is that I can use it to haul bikes around that I am working on for customers in my local community.

My next goals are to:

  1. Move the wheels backwards by about a foot to improve handling and reduce scraping when going down curbs and driveways
  2. Obtain a bike hauler that attaches to the roof or tow hitch of a car to allow me to tow more than one bicycle at a time

This version is awesome though because it was made mainly using junk and swearing :)

I built this using a cheap bike trailer for hauling kids that I picked up off the curb and an old steel bed frame.

The idea is that I can use it to haul bikes around that I am working on for customers in my local community.

My next goals are to:

  1. Move the wheels backwards by about a foot to improve handling and reduce scraping when going down curbs and driveways
  2. Obtain a bike hauler that attaches to the roof or tow hitch of a car to allow me to tow more than one bicycle at a time

This version is awesome though because it was made mainly using junk and swearing :)

0

Evening Jam 17 - NTS-3 - Dirtywave M8 Tracker - LaunchPad Pro Mk3 - Hydrasynth Explorer - YouTube

play · youtube.com
YouTube Evening Jam 17 - NTS-3 - Dirtywave M8 Tracker - LaunchPad Pro Mk3 - Hydrasynth Explorer youtube.com
preview

cross-posted from: lemmy.world/post/46701270

This Jam had many purposes. I have been working on this track based on samples of some old public domain tunes, and wanted to experiment with structure and elements.

I also wanted to finally start practicing using my M8 for live perfomance / Jams. Still just scraping the surface. But given that the M8 has been my goto music device and has me making a lot more songs then in a long time i really want it to be able to be a part of both my “jam” and “song writing” brains. :)

cross-posted from: lemmy.world/post/46701270

This Jam had many purposes. I have been working on this track based on samples of some old public domain tunes, and wanted to experiment with structure and elements.

I also wanted to finally start practicing using my M8 for live perfomance / Jams. Still just scraping the surface. But given that the M8 has been my goto music device and has me making a lot more songs then in a long time i really want it to be able to be a part of both my “jam” and “song writing” brains. :)

0

Progress Tracker via Self-Assessment for The Brotherhood

preview

cross-posted from: lemmy.zip/post/63831008

This is the new progress tracking ability added for users to check their progress of a skill graph. The backend handles this via Assessments and Capabilities - 2 general objects in the Brotherhood that will, in the future, serve as the blueprint for more exotic assessment systems like work-based, peer-verified assessments and capability certificates that will serve as the de-facto portable proof-of-skills.

This is currently in beta-stage and behind an invite-only access. However, very soon, signups will be open-for-all and you can test it for yourself. If you wish to try it out before that, please reach out through to us.

For more information, please visit the official website

cross-posted from: lemmy.zip/post/63831008

This is the new progress tracking ability added for users to check their progress of a skill graph. The backend handles this via Assessments and Capabilities - 2 general objects in the Brotherhood that will, in the future, serve as the blueprint for more exotic assessment systems like work-based, peer-verified assessments and capability certificates that will serve as the de-facto portable proof-of-skills.

This is currently in beta-stage and behind an invite-only access. However, very soon, signups will be open-for-all and you can test it for yourself. If you wish to try it out before that, please reach out through to us.

For more information, please visit the official website

0

Made some handmade botanical micro-art trading cards

Some micro-art handmade botanical Canadian trading cards on a wooden table
preview

Hi iMadeThis Lemmy!

I was recommended to post here with my micro-art collectable botanical trading cards. I spent a long time making these. They are for each province and territory of Canada. Kind of a hobby that got out of ‘hand’. I did everything by hand, locally and offline, so every individual card has some variations to them.

I’m really curious if others would ever want something like this? I’d be happy to figure out if it’s just me who likes them or?

I added a link for a self made waitlist (recommended to make one by a friend for the idea), just to see if anyone anywhere might be interested in my crafts. Not sure if my link worked, it’s my first time trying to post after reading on lemmy for some time.

Thanks

Hi iMadeThis Lemmy!

I was recommended to post here with my micro-art collectable botanical trading cards. I spent a long time making these. They are for each province and territory of Canada. Kind of a hobby that got out of ‘hand’. I did everything by hand, locally and offline, so every individual card has some variations to them.

I’m really curious if others would ever want something like this? I’d be happy to figure out if it’s just me who likes them or?

I added a link for a self made waitlist (recommended to make one by a friend for the idea), just to see if anyone anywhere might be interested in my crafts. Not sure if my link worked, it’s my first time trying to post after reading on lemmy for some time.

Thanks

0

Skill Graph Prototype for The Brotherhood

preview

cross-posted from: lemmy.zip/post/62550551

For reference, the Skill Graph is an open-source self-navigable graph of all human knowledge

A sneak peek into the Skill Graph we are building for The Brotherhood. This interconnected graph and its nodes represent modular concepts and how one can learn one after another. Our next goal is to not only provide a roadmap, link free resources, make the process itself open source but also then use this to verify one’s skills rather than a black box degree/certificate. But most importantly, one day this will encompass all of human knowledge and ability 🔥

We are currently massively scaling up. There is need of curation of these wonderful graphs and connect them with each other to build the ultimate Skill Graph. If you are interested in working with us, please contact us personally. If you want to have more information, please check out our website or ask in the comments

cross-posted from: lemmy.zip/post/62550551

For reference, the Skill Graph is an open-source self-navigable graph of all human knowledge

A sneak peek into the Skill Graph we are building for The Brotherhood. This interconnected graph and its nodes represent modular concepts and how one can learn one after another. Our next goal is to not only provide a roadmap, link free resources, make the process itself open source but also then use this to verify one’s skills rather than a black box degree/certificate. But most importantly, one day this will encompass all of human knowledge and ability 🔥

We are currently massively scaling up. There is need of curation of these wonderful graphs and connect them with each other to build the ultimate Skill Graph. If you are interested in working with us, please contact us personally. If you want to have more information, please check out our website or ask in the comments

0

I made a wordmark for my favourite browser!

preview

As someone who doesn’t do stuff like this very often, I think it turned out very well! Check out the browser if you want to, it’s very good. I like the minimal, no toolbar mode. Works quite well with hyprland. natsumi.greeeen.dev github.com/greeeen-dev/natsumi-browser

As someone who doesn’t do stuff like this very often, I think it turned out very well! Check out the browser if you want to, it’s very good. I like the minimal, no toolbar mode. Works quite well with hyprland. natsumi.greeeen.dev github.com/greeeen-dev/natsumi-browser