#magnetism

posts tagged #magnetism

0

Electricity basics - Induction

preview

An electron flow - a current - in a conductor can influence the electron spin in neighboring conductors, which in turn yields magnetic fields, as we saw with the solenoid. However, this relationship goes both ways. Magnetic fields can also cause electron flow: if we move a conductor through a magnetic field, the magnetic field will push the electrons in the conductor in a certain direction. Recall that we learned in previous posts that it is voltage that makes current flow. The push - or pressure, if you will - that we exert on the electrons in the conductor by moving it through a magnetic field is also voltage. However, contrary to the voltage that we observed in earlier posts, this voltage is not caused by the difference between two differently charged nodes, as with batteries. In the case, voltage is caused by a force called electromotive force . The end goal - or rather, the result - is nevertheless the same: a current occurs! Now, if we move the conductor through the magnetic field in the opposite direction, the polarity of the voltage and the direction of the current change too. This phenomenon, when a magnetic field influences a conductor so that electric potential occurs, is called induction . One prerequisite for induction is that either the magnetic field or the conductor actually moves.

Y5xrbNQiTWTU4T5.jpg
Source: https://adityaabeysinghepresentations.blogspot.com/2013/11/electromagnetic-induction.html?m=1 (2026-09-09)

Current and voltage that regularly changes direction and polarity is called alternating current, shortened AC, and the opposite is called direct current, or DC.

The magnitude of the induced voltage is subject to:

  • the length of the conductor that “cuts through” the magnetic field lines
  • the velocity at which the field lines are “cut”
  • the density of the magnetic field

If the conductor in which we have induced voltage is part of a closed circuit, the voltage is going to drive current through the circuit. As we already know - both from earlier posts but also from above - current causes magnetic fields to appear around the conductor that leads it. This means that there are two magnetic fields present at induction: one between the poles of the magnet that induces the voltage/current and one around the conductor that we move back and forth between the poles of the magnet. The direction of the induced current - and thus the direction of rotation of the magnetic fields around its conductor - is such that it “collides” with the direction of movement that is otherwise required for the induction to happen. This “collision” or “friction” is similar to what happens when you try to make two magnets of the same polarity touch: they repel! This phenomenon is described in greater detail in Lenz’s Law, but to summarize: the kinetic energi required to move either the magnetic fields past the conductor or the conductor through the magnetic fields is converted into electric energy.

To be continued. Meanwhile:

  1. Are there better expressions in English than “cut” and “cut through” magnetic fields?
  2. I translated the book to saying “density of the magnetic field”, but I am unsure whether this is correct in English. Would “intensity” be better?
  3. I feel uneasy (really intrigued!) when the book makes a connection between kinetic and electric energy, because it makes me wonder: are there conversion tables or the likes? As in, how much power in watts, joules or even calories yields how much electric energy? Wouldn’t that depend on the mass of the, say, inductor that is forced through the magnetic fields? Wouldn’t the strength of the magnetic fields also be a determining factor? Leading, in my head, to the definition: if a conductor of X mass moves through magnetic fields of Y strength with the velocity of Z, then V volts and A amperes are induced.
  4. In other places, I have seen “potential difference”, “electromotive force” and “voltage” being used interchangeably. But after reading the section about induction in this book, it does make me want to separate at the very least the phrases that distinguish how voltage is achieved: by opposite charges (such as in a battery) or by electromotive force as seen in induction…
  5. I was absolutely blown away when I understood what induction is! So much of our appliances seem to be using this technology! Like, the spinning bikes at the gym? I can just imagine there being a bunch of magnets surrounding the wheel looking “outwards”, and pieces of iron all around the wheel itself looking “inward” and as I pedal, the rotation of the wheel induces voltage/current, which turns on the display?! Again, I’m so amped about this. 😆🩷

An electron flow - a current - in a conductor can influence the electron spin in neighboring conductors, which in turn yields magnetic fields, as we saw with the solenoid. However, this relationship goes both ways. Magnetic fields can also cause electron flow: if we move a conductor through a magnetic field, the magnetic field will push the electrons in the conductor in a certain direction. Recall that we learned in previous posts that it is voltage that makes current flow. The push - or pressure, if you will - that we exert on the electrons in the conductor by moving it through a magnetic field is also voltage. However, contrary to the voltage that we observed in earlier posts, this voltage is not caused by the difference between two differently charged nodes, as with batteries. In the case, voltage is caused by a force called electromotive force . The end goal - or rather, the result - is nevertheless the same: a current occurs! Now, if we move the conductor through the magnetic field in the opposite direction, the polarity of the voltage and the direction of the current change too. This phenomenon, when a magnetic field influences a conductor so that electric potential occurs, is called induction . One prerequisite for induction is that either the magnetic field or the conductor actually moves.

Y5xrbNQiTWTU4T5.jpg
Source: https://adityaabeysinghepresentations.blogspot.com/2013/11/electromagnetic-induction.html?m=1 (2026-09-09)

Current and voltage that regularly changes direction and polarity is called alternating current, shortened AC, and the opposite is called direct current, or DC.

The magnitude of the induced voltage is subject to:

  • the length of the conductor that “cuts through” the magnetic field lines
  • the velocity at which the field lines are “cut”
  • the density of the magnetic field

If the conductor in which we have induced voltage is part of a closed circuit, the voltage is going to drive current through the circuit. As we already know - both from earlier posts but also from above - current causes magnetic fields to appear around the conductor that leads it. This means that there are two magnetic fields present at induction: one between the poles of the magnet that induces the voltage/current and one around the conductor that we move back and forth between the poles of the magnet. The direction of the induced current - and thus the direction of rotation of the magnetic fields around its conductor - is such that it “collides” with the direction of movement that is otherwise required for the induction to happen. This “collision” or “friction” is similar to what happens when you try to make two magnets of the same polarity touch: they repel! This phenomenon is described in greater detail in Lenz’s Law, but to summarize: the kinetic energi required to move either the magnetic fields past the conductor or the conductor through the magnetic fields is converted into electric energy.

To be continued. Meanwhile:

  1. Are there better expressions in English than “cut” and “cut through” magnetic fields?
  2. I translated the book to saying “density of the magnetic field”, but I am unsure whether this is correct in English. Would “intensity” be better?
  3. I feel uneasy (really intrigued!) when the book makes a connection between kinetic and electric energy, because it makes me wonder: are there conversion tables or the likes? As in, how much power in watts, joules or even calories yields how much electric energy? Wouldn’t that depend on the mass of the, say, inductor that is forced through the magnetic fields? Wouldn’t the strength of the magnetic fields also be a determining factor? Leading, in my head, to the definition: if a conductor of X mass moves through magnetic fields of Y strength with the velocity of Z, then V volts and A amperes are induced.
  4. In other places, I have seen “potential difference”, “electromotive force” and “voltage” being used interchangeably. But after reading the section about induction in this book, it does make me want to separate at the very least the phrases that distinguish how voltage is achieved: by opposite charges (such as in a battery) or by electromotive force as seen in induction…
  5. I was absolutely blown away when I understood what induction is! So much of our appliances seem to be using this technology! Like, the spinning bikes at the gym? I can just imagine there being a bunch of magnets surrounding the wheel looking “outwards”, and pieces of iron all around the wheel itself looking “inward” and as I pedal, the rotation of the wheel induces voltage/current, which turns on the display?! Again, I’m so amped about this. 😆🩷
0

Electricity basics - The relationship between electricity and magnetism

preview

IMPORTANT NOTICE
I have no formal education related to electricity or any other branch within the natural sciences. I take no responsibility for the factual accuracy of the posts, comments or any other content within this community.

In previous posts, we have looked at electricity and magnetism separately. However, electricity and magnetism have a close relationship. When current flows through a conductor, magnetic fields appear around the conductor. These are not the same kind of magnetic fields as those that emanate from permanent magnets, which are generated by electron spin. Instead, they are generated by the movement of electrons in the conductor. If the current stops, the magnetic field disappears.

The magnetic fields that are generated around a conductor when they carry current rotate around the exterior of the conductor in certain directions: they rotate clockwise, seen in the direction of the current/electron flow.

The direction of rotating magnetic fields in relation to the direction of current:
ihLCFVWmth3r3X5.jpg
Source: https://micro.magnet.fsu.edu/electromag/electricity/generators/ (2026-09-07)

The strength of the magnetic fields waxes and wanes in relation to the amount of current that flows through the conductor. The strength of the magnetic fields is weaker further away from the condctor. If you put a compass next to a single conductor that carries current, the arrow of the compass will position itself perpendicularly to the direction of the current, indicating the direction of the rotation of the magnetic fields.

Compasses next to a current carrying conductor:
hJITgTCNKhRPzI0.jpg
Source: https://storage.googleapis.com/dzprtnlcmuyjte/magnetic-field-around-a-wire-experiment.html (2026-09-07)

When looking at cross sections of wires, an “x” and a dot can be used to indicate the direction of current, together with the direction of the magnetic fields. The “x” indicates that the current flows away from the viewer, while the dot indicates that the current flows towards the viewer:
me4WFCEqyzfxBpJ.jpg
Source: https://www.slideserve.com/tracy/magnetic-field-of-electric-currents (2026-09-07)

The placement of conductors needs to be taken into consideration. Remember what we learned about electron spin! With that in mind, it is easier to understand that if two conductors whose current flows in opposite directions - and thus having magnetic fields rotating in opposite directions - are placed in close proximity to each other, the magnetic fields cancel each other out and no magnetic phenomena is observed outside the conductors. If, however, the conductors are placed so that current flows in the same direction, the magnetic fields amplify each other.
(Illustration needed.)

We can leverage these properties to create strong, non permanent magnets by twisting conductors into spirals or coils. The close proximity of the individual turns in the coil will yield the same effect as if we would have placed several separate conductors whose current flows in the same direction next to each other. We can enhance the strength of the magnetic fields even further by winding the conductor around a piece of iron, keeping the coil shape. The magnetic fields of the coil will then affect the direction of electron spin within the iron and make the iron magnetic. This, in turn, further enhances the magnetic fields of the coil. We call such magnets electromagnets or solenoids.

Simple solenoid construction:
cQSYqDJuImDVVXO.jpg
Source: https://www.skyfilabs.com/project-ideas/diy-electromagnet-stem-project-for-school-kids (2026-09-07)

Flow of magnetic fields in a simple solenoid:
SBvOiP9kzrnWHpY.jpg
Source: https://storage.googleapis.com/dtacjmqtkptxue/what-is-the-difference-between-electromagnet-and-magnet.html (2026-09-07)

One application of electromagnets are in so called relays. Relays are a way to use electromagnetism to turn a switch on and off instead of having to manually flip a switch. The conductor coil with the iron core that we talked about above are seen to the left, in the picture below. Just to the right of that, we see two flaps touching and releasing as current is being applied and removed. When current is applied, the iron core becomes magnetic, pulling the flap just above it downwards. This flap works as lever that actuates the other two flaps to the right.

TjARvTMEV3cCB9g.jpg

Go2ZBhKB29ReWhK.gif

To be continued.

IMPORTANT NOTICE
I have no formal education related to electricity or any other branch within the natural sciences. I take no responsibility for the factual accuracy of the posts, comments or any other content within this community.

In previous posts, we have looked at electricity and magnetism separately. However, electricity and magnetism have a close relationship. When current flows through a conductor, magnetic fields appear around the conductor. These are not the same kind of magnetic fields as those that emanate from permanent magnets, which are generated by electron spin. Instead, they are generated by the movement of electrons in the conductor. If the current stops, the magnetic field disappears.

The magnetic fields that are generated around a conductor when they carry current rotate around the exterior of the conductor in certain directions: they rotate clockwise, seen in the direction of the current/electron flow.

The direction of rotating magnetic fields in relation to the direction of current:
ihLCFVWmth3r3X5.jpg
Source: https://micro.magnet.fsu.edu/electromag/electricity/generators/ (2026-09-07)

The strength of the magnetic fields waxes and wanes in relation to the amount of current that flows through the conductor. The strength of the magnetic fields is weaker further away from the condctor. If you put a compass next to a single conductor that carries current, the arrow of the compass will position itself perpendicularly to the direction of the current, indicating the direction of the rotation of the magnetic fields.

Compasses next to a current carrying conductor:
hJITgTCNKhRPzI0.jpg
Source: https://storage.googleapis.com/dzprtnlcmuyjte/magnetic-field-around-a-wire-experiment.html (2026-09-07)

When looking at cross sections of wires, an “x” and a dot can be used to indicate the direction of current, together with the direction of the magnetic fields. The “x” indicates that the current flows away from the viewer, while the dot indicates that the current flows towards the viewer:
me4WFCEqyzfxBpJ.jpg
Source: https://www.slideserve.com/tracy/magnetic-field-of-electric-currents (2026-09-07)

The placement of conductors needs to be taken into consideration. Remember what we learned about electron spin! With that in mind, it is easier to understand that if two conductors whose current flows in opposite directions - and thus having magnetic fields rotating in opposite directions - are placed in close proximity to each other, the magnetic fields cancel each other out and no magnetic phenomena is observed outside the conductors. If, however, the conductors are placed so that current flows in the same direction, the magnetic fields amplify each other.
(Illustration needed.)

We can leverage these properties to create strong, non permanent magnets by twisting conductors into spirals or coils. The close proximity of the individual turns in the coil will yield the same effect as if we would have placed several separate conductors whose current flows in the same direction next to each other. We can enhance the strength of the magnetic fields even further by winding the conductor around a piece of iron, keeping the coil shape. The magnetic fields of the coil will then affect the direction of electron spin within the iron and make the iron magnetic. This, in turn, further enhances the magnetic fields of the coil. We call such magnets electromagnets or solenoids.

Simple solenoid construction:
cQSYqDJuImDVVXO.jpg
Source: https://www.skyfilabs.com/project-ideas/diy-electromagnet-stem-project-for-school-kids (2026-09-07)

Flow of magnetic fields in a simple solenoid:
SBvOiP9kzrnWHpY.jpg
Source: https://storage.googleapis.com/dtacjmqtkptxue/what-is-the-difference-between-electromagnet-and-magnet.html (2026-09-07)

One application of electromagnets are in so called relays. Relays are a way to use electromagnetism to turn a switch on and off instead of having to manually flip a switch. The conductor coil with the iron core that we talked about above are seen to the left, in the picture below. Just to the right of that, we see two flaps touching and releasing as current is being applied and removed. When current is applied, the iron core becomes magnetic, pulling the flap just above it downwards. This flap works as lever that actuates the other two flaps to the right.

TjARvTMEV3cCB9g.jpg

Go2ZBhKB29ReWhK.gif

To be continued.

0

Electricity basics - Magnetic equilibrium

preview

Magnetic fields are invisible force fields. They have direction and strength. They emanate from and return to the same point in space. But how do they emerge in the first place? Electrons not only orbit the atomic nucleus, but they also rotate around their own axis. This is called a “spin”. This rotation generates a magnetic field. No magnetic phenomena occur outside the atom.

Electron orbit and spin:
A5hispe2Q48wGra.png
https://www.researchgate.net/figure/Demonstrating-the-movement-of-the-electron-around-the-nucleus-58_fig2_368608080 (2026-09-06)

Within the same atom, electrons can rotate in different directions, or they can rotate in the same direction. When the electrons rotate in different directions, their individual magnetic fields cancel each other out and there is magnetic equilibrium. In many cases the same amount of electrons rotate in one direction as in the opposite direction.

Electrons spinning in different directions:
0cVaKQDIfWBc4Tx.jpg
Source: Ellära i teori och praktik, Leif Westlund and Gleerups Utbildning AB, 2012.

When all electrons rotate in the same direction, they enhance each other’s magnetic fields, instead of cancelling each other out. The material of which they are a part is then magnetic.

Electrons spinning in one direction (1):
GkqfsRyI6ivdIwq.jpg
Source: ibid.

Electrons spinning in one direction (2):
OwxZpb4EwVMtwQJ.jpg
Source: ibid.

A few materials, mostly minerals such as magnetite, are naturally magnetic. Materials, or objects, that have a constant magnetic field are called permanent magnets. Magnetic equilibrium - or the lack thereof - cannot change on its own. It can only change if influenced by an external force. For instance, permanent magnets can be artificially created, just as iron can be made temporarily magnetic. The ability to retain magnetism is called “remanence”. An example of a non permanent piece of metal that is often made magnetic is the tip of a screwdriver.

Magnetite:
fAHy4Io8KmRPgp8.jpg
Source: https://commons.wikimedia.org/w/index.php?curid=10139390 (2026-09-06)

Magnetic screwdriver:
A6h1WgVGQ9v4m7Q.jpg
Source: https://www.howtogeek.com/854142/is-it-safe-to-use-magnetic-screwdriver-in-a-pc/ (2026-09-26)

Magnets have two poles. In case of a bar magnet, they are called north/N-pole and south/S-pole. The magnetic flow emanates from the N-pole and returns through the S-pole. The magnetic flow is illustrated with field lines, which are imaginary, but a great way to start understanding magnetic fields and their directions. N-poles are often both illustrated and physically colored red, while S-poles are often white.

Bar magnet with illustrated field lines:
oBvBTlrGlICZnR0.jpg
Source: https://www.archyde.com/top-10-must-have-smartphones-right-now-galaxy-a56-xiaomi-15t-pro-more/ (2026-09-26)

Two materials of the same polarity can never be united and two materials of opposite polarity will attract each other with equal force.

zdhpvbfDtF6p74O.jpg
Source: https://stock.adobe.com/images/shows-a-diagram-of-magnetic-field-in-a-situation-of-repelling-and-attraction/112218437 (2026-09-06)

Magnetic fields can be manipulated or lead to flow in certain directions or in a more concentrated manner. For instance, by placing a bar magnet between the two ends of a U-shaped piece of iron.

(Illustration needed.)

To be continued. Meanwhile:

  1. I suppose “no magnetic phenomena occur outside the atom” is an oversimplification and what they really mean to say is that no magnetic fields are produced outside the atom?
  2. Do electrons really all rotate in the very same or the opposite three dimensional direction, or is this an oversimplification too and they really:

    • either rotate in a great variety of directions
    • or in similar directions
  3. By “united”, are they talking about nuclear fusion? I’m asking because I can physically push two N-poles together and make them touch if the magnet is small enough…

  4. It doesn’t sound or feel intuitive to say that opposite polarities will attract with equal force. What if one magnet has a mass of 20kg and the other 2 grams?

Magnetic fields are invisible force fields. They have direction and strength. They emanate from and return to the same point in space. But how do they emerge in the first place? Electrons not only orbit the atomic nucleus, but they also rotate around their own axis. This is called a “spin”. This rotation generates a magnetic field. No magnetic phenomena occur outside the atom.

Electron orbit and spin:
A5hispe2Q48wGra.png
https://www.researchgate.net/figure/Demonstrating-the-movement-of-the-electron-around-the-nucleus-58_fig2_368608080 (2026-09-06)

Within the same atom, electrons can rotate in different directions, or they can rotate in the same direction. When the electrons rotate in different directions, their individual magnetic fields cancel each other out and there is magnetic equilibrium. In many cases the same amount of electrons rotate in one direction as in the opposite direction.

Electrons spinning in different directions:
0cVaKQDIfWBc4Tx.jpg
Source: Ellära i teori och praktik, Leif Westlund and Gleerups Utbildning AB, 2012.

When all electrons rotate in the same direction, they enhance each other’s magnetic fields, instead of cancelling each other out. The material of which they are a part is then magnetic.

Electrons spinning in one direction (1):
GkqfsRyI6ivdIwq.jpg
Source: ibid.

Electrons spinning in one direction (2):
OwxZpb4EwVMtwQJ.jpg
Source: ibid.

A few materials, mostly minerals such as magnetite, are naturally magnetic. Materials, or objects, that have a constant magnetic field are called permanent magnets. Magnetic equilibrium - or the lack thereof - cannot change on its own. It can only change if influenced by an external force. For instance, permanent magnets can be artificially created, just as iron can be made temporarily magnetic. The ability to retain magnetism is called “remanence”. An example of a non permanent piece of metal that is often made magnetic is the tip of a screwdriver.

Magnetite:
fAHy4Io8KmRPgp8.jpg
Source: https://commons.wikimedia.org/w/index.php?curid=10139390 (2026-09-06)

Magnetic screwdriver:
A6h1WgVGQ9v4m7Q.jpg
Source: https://www.howtogeek.com/854142/is-it-safe-to-use-magnetic-screwdriver-in-a-pc/ (2026-09-26)

Magnets have two poles. In case of a bar magnet, they are called north/N-pole and south/S-pole. The magnetic flow emanates from the N-pole and returns through the S-pole. The magnetic flow is illustrated with field lines, which are imaginary, but a great way to start understanding magnetic fields and their directions. N-poles are often both illustrated and physically colored red, while S-poles are often white.

Bar magnet with illustrated field lines:
oBvBTlrGlICZnR0.jpg
Source: https://www.archyde.com/top-10-must-have-smartphones-right-now-galaxy-a56-xiaomi-15t-pro-more/ (2026-09-26)

Two materials of the same polarity can never be united and two materials of opposite polarity will attract each other with equal force.

zdhpvbfDtF6p74O.jpg
Source: https://stock.adobe.com/images/shows-a-diagram-of-magnetic-field-in-a-situation-of-repelling-and-attraction/112218437 (2026-09-06)

Magnetic fields can be manipulated or lead to flow in certain directions or in a more concentrated manner. For instance, by placing a bar magnet between the two ends of a U-shaped piece of iron.

(Illustration needed.)

To be continued. Meanwhile:

  1. I suppose “no magnetic phenomena occur outside the atom” is an oversimplification and what they really mean to say is that no magnetic fields are produced outside the atom?
  2. Do electrons really all rotate in the very same or the opposite three dimensional direction, or is this an oversimplification too and they really:

    • either rotate in a great variety of directions
    • or in similar directions
  3. By “united”, are they talking about nuclear fusion? I’m asking because I can physically push two N-poles together and make them touch if the magnet is small enough…

  4. It doesn’t sound or feel intuitive to say that opposite polarities will attract with equal force. What if one magnet has a mass of 20kg and the other 2 grams?