GoThread
appearance log in
home all local communities
H

@Hamknight@lemmy.world

@Hamknight@lemmy.world

member since 7 Aug 2023 05:35 · modlog

postscomments
  • on Did you check inside the box? in c/programmer_humor@programming.dev · 5 Nov 2026

    The old GiB vs GB

  • on Looking to offload Plex from my gaming PC in c/selfhosted@lemmy.world · 3 Nov 2026

    Going with a cheap used system, and then adding an Intel a310 is a good start. For getting drives, look into getting some external Seagate drives, popping them open, and using them internally. Just a couple ideas 😊

  • on Home server in c/selfhosted@lemmy.world · 19 Oct 2026

    Tdarr is a pretty fun automation tool if you Wana try. Basically I down scale to 1080p if it’s higher, then I rencode to av1 at 8mbps or lower depending on current bitrate. I also keep all audio and subtitle streams how they were

  • on Home server in c/selfhosted@lemmy.world · 18 Oct 2026

    Does it help to point out this is vinyl backed foam 😉 really thin vinyl sheet on it, but it helps

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Oh! Just the stock webpage

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Yea it’s mobile. Away from home for a bit 😅

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    It’s in the middle of rencoding my library, should finish at some point and return to low usage

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I get about the same affect by placing a layer of the foam on the wall behind the fans. But you’re totally right. Without that lil bit the fan noise from the intake and exhaust was a lil noticeable

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    With the big tower cooler it now has in the server it barely touches 80c under load. As for sound, I can take a recording when I get home later this week if anyone’s are still interested

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Two of the drives are 18tb I got cheap 😂 so maybe in a decade I’ll get that 8tb of space

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I keep my place at 74, and basically have a per room heat pump to never have the temp be an issue even on a 108 day. I’ve been running the setup for over two years now and have monitored thermals the whole time and have never had an issue. I understand the concern, and had the same concerns at first too, but the results don’t lie. It’s just very well tuned for it’s environment

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I9 11900k and about 18 spereate sata drives. The lil amounts add up 😂

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    They basically just sit and spin with all reads going to a cache nvme drive 😊 should live as long as possible

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Was just what I was experimenting with when I built it a few years ago. Never gave may issues so I’ve just stayed with it. Would be nice to be able to mismatch my drive size though

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    It’s alot of fun. NSFW makes some really easy to build in ITX cases if you ever want to dabble. My req though is too put a baffle made of stuff foam to force cool air in for the gpu. I’ll post a Pic of my main setup when I get home later this week if you want

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Lol. I mistyped tennis so many times 😂

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Yea, I definitely would have gone z2, but this all started with the drives, and slowly expanded into this monster. But so far it’s been running smooth. The drives were added at different times to so they shouldn’t fail at the same time (hopefully 😂)

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    It just had a very undersized cooler at the time (pics of case are hiding here somewhere lol). It would idle normally, but load put it near throttle. Moved to the 9800x3d though in the same case and that performs like a dream

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    127.0.0.1 sweet 127.0.0.1

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I posted specs and temps if you were curious 😊

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I shall now my known as Sir Hamknight of Tennis 😂❤️🎾

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Super quiet, and had been running non stop for over a year no with no problems 😊 also that i9 runs super hot. When it was in my lil gaming rig it was always running up near 90. So retiring to the server had been much more gentle on it, lol

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Plus the other fan hiding behind the system 😉 posted temps in a comment of you eye curious

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Surprisingly the server is pretty good on pretty usage. It pulls about 300-350w from the wall, so probably about $50 a month. For being my security system and media server is pretty cost effective

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Thanks! Has been alot of fun playing with

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Here’s my tdarr flow. I have redundent paths to handle if qsv fails and to retry in software if you’re curious of why it splits

    Also, here’s my lil gaming rig too. Runs warm, but it’s tiny.

    It’s a 9800x3d paired with a 6800xt

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    That’s crazy! That would be such a fun system to play with for a silent transcoding setup. Thanks for sharing 😊

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    My dang autocorrect last night refused to use the word temps 😂 caught it on most of my replies, but it slipped past a few times

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Oooo, cute mini system! I’ve always wanted to start a cluster with tiny towers like that

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    This post here. I fixed it on most replies, but SwiftKey did not like me using the word temp

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Or spaceballs 3, the search for spaceballs 2

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    They are! I also have a small sheet of foam on the wall behind the cabinet too to catch any sound leaking out, so all I get is a small hum

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    It was a common comment after a few hours 😂 also looking forward to spaceballs the sequel!!

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I just think no one’s really coming at it in a way they think it’s rude, and most had been out of concern, just worded rough. I definitely can be rough with my words sometime so I can’t be too mad. Also thanks for engaging ❤️ love you and all the lurkers following along

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    To be honest, I have more media then I’ll ever need, and after rencoding everything it shouldn’t use even half the space. The a310 is the real goat here for saving space

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I’m choosing to focus on the positive comments, and giving info to those who doubt. In the end I know there’s a few people at least who saw this and got some inspiration for a fun project

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Oh sweet! It’s such a great case. $20 is a bargin

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    The whole setup is really quiet actually! The cabinet has an intake fan hiding on the bottom, while the top fan is just exhaust. Then all the fans in the system are built for front to top exhaust. I posted temps while the system is running full tilt of you were curious

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    You gotta do push pull. There’s another fan on the bottom of the cabinet pulling in fresh, while all the hot air is directed up and out. Temps are more stable then my gaming rig sitting 5 feet away in the open air.

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Posted temps and specs if you were curious 😉 guessing you didn’t think I had more fans in the cabinet

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Thankfully all either used, or bought before the Ai drive prices

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Oh, and if anyone is curious on specs. This is my old gaming rig but it’s: I9 11900k Z590I Vision D ITX mobo 64gb memory The 16x lane is bifurcated to run: Intel a310 & Lsi 9305 16e into a hp dl380

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    I’m currently running truenas on it. Simple and free

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    That’s it! Though when I was first seting up my new place 😊 it’s on my comment history so I don’t think that’s snooping

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Theres currently 110 tb of usable space. Got a bunch of 14tb drives when you could shuck them for 150 each

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Not if there were a second fan hiding in there 😉

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    Wifi is just there as a backup. Everything is hardwired

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    It’s a really old corsair case I picked up for free. It’s also packed with noctua fans 😂

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    The sound proofing helps a ton. This sits in my living room and I can barely hear it. There’s also a second fan hiding on the bottom for intake, while the top is just exhaust. Keeps temps nice and cool

  • on Home server in c/selfhosted@lemmy.world · 17 Oct 2026

    There are actuality two fans. There’s an intake on the bottom full cold air, and the top is exhaust. I posted temps if you wanna see how it is at full tilt

GoThread · self-hosted threadiverse · instances · modlog · rss · appearance · AGPL-3.0