showing posts tagged #electricity — clear

0

Electricity basics - The relationship between electricity and magnetism

preview

IMPORTANT NOTICE
I have no formal education related to electricity or any other branch within the natural sciences. I take no responsibility for the factual accuracy of the posts, comments or any other content within this community.

In previous posts, we have looked at electricity and magnetism separately. However, electricity and magnetism have a close relationship. When current flows through a conductor, magnetic fields appear around the conductor. These are not the same kind of magnetic fields as those that emanate from permanent magnets, which are generated by electron spin. Instead, they are generated by the movement of electrons in the conductor. If the current stops, the magnetic field disappears.

The magnetic fields that are generated around a conductor when they carry current rotate around the exterior of the conductor in certain directions: they rotate clockwise, seen in the direction of the current/electron flow.

The direction of rotating magnetic fields in relation to the direction of current:
ihLCFVWmth3r3X5.jpg
Source: https://micro.magnet.fsu.edu/electromag/electricity/generators/ (2026-09-07)

The strength of the magnetic fields waxes and wanes in relation to the amount of current that flows through the conductor. The strength of the magnetic fields is weaker further away from the condctor. If you put a compass next to a single conductor that carries current, the arrow of the compass will position itself perpendicularly to the direction of the current, indicating the direction of the rotation of the magnetic fields.

Compasses next to a current carrying conductor:
hJITgTCNKhRPzI0.jpg
Source: https://storage.googleapis.com/dzprtnlcmuyjte/magnetic-field-around-a-wire-experiment.html (2026-09-07)

When looking at cross sections of wires, an “x” and a dot can be used to indicate the direction of current, together with the direction of the magnetic fields. The “x” indicates that the current flows away from the viewer, while the dot indicates that the current flows towards the viewer:
me4WFCEqyzfxBpJ.jpg
Source: https://www.slideserve.com/tracy/magnetic-field-of-electric-currents (2026-09-07)

The placement of conductors needs to be taken into consideration. Remember what we learned about electron spin! With that in mind, it is easier to understand that if two conductors whose current flows in opposite directions - and thus having magnetic fields rotating in opposite directions - are placed in close proximity to each other, the magnetic fields cancel each other out and no magnetic phenomena is observed outside the conductors. If, however, the conductors are placed so that current flows in the same direction, the magnetic fields amplify each other.
(Illustration needed.)

We can leverage these properties to create strong, non permanent magnets by twisting conductors into spirals or coils. The close proximity of the individual turns in the coil will yield the same effect as if we would have placed several separate conductors whose current flows in the same direction next to each other. We can enhance the strength of the magnetic fields even further by winding the conductor around a piece of iron, keeping the coil shape. The magnetic fields of the coil will then affect the direction of electron spin within the iron and make the iron magnetic. This, in turn, further enhances the magnetic fields of the coil. We call such magnets electromagnets or solenoids.

Simple solenoid construction:
cQSYqDJuImDVVXO.jpg
Source: https://www.skyfilabs.com/project-ideas/diy-electromagnet-stem-project-for-school-kids (2026-09-07)

Flow of magnetic fields in a simple solenoid:
SBvOiP9kzrnWHpY.jpg
Source: https://storage.googleapis.com/dtacjmqtkptxue/what-is-the-difference-between-electromagnet-and-magnet.html (2026-09-07)

One application of electromagnets are in so called relays. Relays are a way to use electromagnetism to turn a switch on and off instead of having to manually flip a switch. The conductor coil with the iron core that we talked about above are seen to the left, in the picture below. Just to the right of that, we see two flaps touching and releasing as current is being applied and removed. When current is applied, the iron core becomes magnetic, pulling the flap just above it downwards. This flap works as lever that actuates the other two flaps to the right.

TjARvTMEV3cCB9g.jpg

Go2ZBhKB29ReWhK.gif

To be continued.

IMPORTANT NOTICE
I have no formal education related to electricity or any other branch within the natural sciences. I take no responsibility for the factual accuracy of the posts, comments or any other content within this community.

In previous posts, we have looked at electricity and magnetism separately. However, electricity and magnetism have a close relationship. When current flows through a conductor, magnetic fields appear around the conductor. These are not the same kind of magnetic fields as those that emanate from permanent magnets, which are generated by electron spin. Instead, they are generated by the movement of electrons in the conductor. If the current stops, the magnetic field disappears.

The magnetic fields that are generated around a conductor when they carry current rotate around the exterior of the conductor in certain directions: they rotate clockwise, seen in the direction of the current/electron flow.

The direction of rotating magnetic fields in relation to the direction of current:
ihLCFVWmth3r3X5.jpg
Source: https://micro.magnet.fsu.edu/electromag/electricity/generators/ (2026-09-07)

The strength of the magnetic fields waxes and wanes in relation to the amount of current that flows through the conductor. The strength of the magnetic fields is weaker further away from the condctor. If you put a compass next to a single conductor that carries current, the arrow of the compass will position itself perpendicularly to the direction of the current, indicating the direction of the rotation of the magnetic fields.

Compasses next to a current carrying conductor:
hJITgTCNKhRPzI0.jpg
Source: https://storage.googleapis.com/dzprtnlcmuyjte/magnetic-field-around-a-wire-experiment.html (2026-09-07)

When looking at cross sections of wires, an “x” and a dot can be used to indicate the direction of current, together with the direction of the magnetic fields. The “x” indicates that the current flows away from the viewer, while the dot indicates that the current flows towards the viewer:
me4WFCEqyzfxBpJ.jpg
Source: https://www.slideserve.com/tracy/magnetic-field-of-electric-currents (2026-09-07)

The placement of conductors needs to be taken into consideration. Remember what we learned about electron spin! With that in mind, it is easier to understand that if two conductors whose current flows in opposite directions - and thus having magnetic fields rotating in opposite directions - are placed in close proximity to each other, the magnetic fields cancel each other out and no magnetic phenomena is observed outside the conductors. If, however, the conductors are placed so that current flows in the same direction, the magnetic fields amplify each other.
(Illustration needed.)

We can leverage these properties to create strong, non permanent magnets by twisting conductors into spirals or coils. The close proximity of the individual turns in the coil will yield the same effect as if we would have placed several separate conductors whose current flows in the same direction next to each other. We can enhance the strength of the magnetic fields even further by winding the conductor around a piece of iron, keeping the coil shape. The magnetic fields of the coil will then affect the direction of electron spin within the iron and make the iron magnetic. This, in turn, further enhances the magnetic fields of the coil. We call such magnets electromagnets or solenoids.

Simple solenoid construction:
cQSYqDJuImDVVXO.jpg
Source: https://www.skyfilabs.com/project-ideas/diy-electromagnet-stem-project-for-school-kids (2026-09-07)

Flow of magnetic fields in a simple solenoid:
SBvOiP9kzrnWHpY.jpg
Source: https://storage.googleapis.com/dtacjmqtkptxue/what-is-the-difference-between-electromagnet-and-magnet.html (2026-09-07)

One application of electromagnets are in so called relays. Relays are a way to use electromagnetism to turn a switch on and off instead of having to manually flip a switch. The conductor coil with the iron core that we talked about above are seen to the left, in the picture below. Just to the right of that, we see two flaps touching and releasing as current is being applied and removed. When current is applied, the iron core becomes magnetic, pulling the flap just above it downwards. This flap works as lever that actuates the other two flaps to the right.

TjARvTMEV3cCB9g.jpg

Go2ZBhKB29ReWhK.gif

To be continued.

0

Electricity basics - The electric circuit

preview

We can harness electric charges and their potentials by artificially creating networks of paths for them in which they can equalize. We call these networks “circuits” and we can use them to create light, among other things.

This is a circuit:
ZTPu6hstSL6NT35.png
Source: https://www.caretxdigital.com/split-ac-outdoor-contactor-wiring-diagram-2/ (2026-09-02)

This is also a circuit:
jVjl88L9jrUzczn.webp
Source: https://stock.adobe.com/in/images/a-complex-electrical-wiring-diagram-with-colorful-wires-circuits-and-components-on-a-white-background-illustrating-a-detailed-schematic-for-an-electronic-system/938846171 (2026-09-02)

In the previous post, we saw how objects or materials can become negatively or positively charged by friction, such as when you - wearing slippers - walk over a carpet: electrons from the carpet are “smeared” onto you, making you negatively charged until you discharge/equalize your potential by touching something that is less negatively charged.

There are canisters/containers that hold opposite charges artificially: batteries. How nifty, that we can carry around canisters of electric potentinal in our pockets!!!

Various batteries:
a34BSuHXBBD1YWj.jpg
Source: https://www.popsci.com/technology/why-so-many-batteries/ (2026-09-02)

In simple terms, batteries contain two chambers with opposite charges, one negative and one positive. To access the charges inside the chambers, we add a gate to each chamber called nodes: one negative and one positive. If the two nodes are in some way connected to each other, a path is created for the charges in the chambers to equalize. That which connects the two nodes is called a “conductor” and it is the potential difference - the voltage - in the charges that drives the equalization. Where there is a potential difference, charges always want to equalize. Connecting two opposite charges this way is one way of creating an electric circuit. When the circuit is closed - when we connect the two opposite charges - a current of these charges in the form of electrons is allowed to flow through the conductor from the negative chamber to the positive chamber. The flow of electrons in a closed circuit, “carrying” charges, is called an electric current and it goes on until the potential difference has been equalized.

Electrons do not move with the speed of light. That which we perceive as an instantaneous effect of closing a circuit, for instance flicking a light switch, is the effect of the flow of electrons. When an electric circuit is closed, an electromagnetic wave propagates all over the circuit. This wave pushes the electrons in the direction of the potential difference - negative to positive - so that the electrons closest to the negative “source” pushes the electrons closest to the positive “end”. This propagation of the electromagnetic wave occurs almost at the speed of light. Saying that “electrons move at the speed of light” is just a simplification.

Open circuit:
jOnH8paEvLPgQgR.jpg
Source: Petzold, Charles. Code: The Hidden Language of Computer Hardware and Software: Second Edition. Pearson Education, Inc. 2023. p22.

Closed circtui:
JIsAbVxSxGRILGG.jpg
Source: ibid.

That which we used to connect the two nodes of the battery is usually made of copper, but different materials are differently good - or bad - at allowing electric current to flow. Electrons orbit the atomic nucleus at various distances, simplified as “shells”. The number of electrons that orbit an atom differs by what basic element that specific atom constitutes. Some elements - or materials - have electrons that are not strongly bound to shells. These materials have “free electrons” or “valence electrons”. Valence electrons in conductors move even when there is no voltage applied, but they move randomly and very slowly. By applying a voltage, we can influence the movement of the electrons.

Valence electrons:
x3PDsfrq0TbpW1f.webp
Source: https://valenceelectrons.com/valence-electrons-of-copper/ (2026-09-01)

Materials that have many valence electrons - often metals - are called conductors and materials that have no valence electrons - such as glass, plastic and ceramic - are called insulators. The ability of a material to allow current is called conductivity and its inability to allow current is called resistivity. One way to picture resistivity is to imagine electrons colliding with other particles, creating friction. High conductivity = low resistivity and vice versa. The resistivity of a material is decided by what material we are talking about, its temperature, length and thickness. Temperature plays a role because heat increases the random movement of electrons. Therefore, resistivity must be given alongside temperature. A short, thick, cool conductor has generally lower resistivity while a long, thin, hot conductor has generally higher resistivity.

Finally, returning to creating light, let’s add a lightbulb between the two nodes of the batteries as in the images above. The filament in traditional lightbulbs is a long, thin piece of material called tungsten, which endures high temperatures. Because the current in a closed circuit - the flow of electrons - continues with the same pressure (voltage) but encounters higher resistance in the filament, only a few electrons are going to be able to pass through it at any given time. The potential is going to equalize at a slower pace. The resistance that the flow of electrons encounters creates heat. Heat increases the resistivity of the filament. This circle continues until the lightbulb reaches its target temperature and emits light. A component in an electric circuit that does “useful work” this way, such as a lightbulb - or its filament - is called a “load”.

Tungsten filament, no current:
9LhnM1OZ3dRfz4I.png
Source: https://tdmfginc.net/product/tungsten-filament/ (2026-09-02)

Tungsten filament, with current:
QjaeVVYFMEVot00.jpg
Source: https://www.azom.com/article.aspx?ArticleID=1538 (2026-09-02)

If the circuit, intentionally or not, is closed before or after the load - in other words bypassing it - a short circuit occurs. Electric current always chooses the path with the least resistance. Because of the low resistance, a surge in current occurs, possibly depleting our batteries very quickly.

To be continued. Meanwhile:

  1. What is the difference between “resistivity” and “resistance”?
  2. “This circle continues until the lightbulb reaches its target temperature and emits light.” This must be an oversimplification for the highschoolers. Couldn’t you just keep increasing the voltage and reach even higher temperatures, even more light, until the filament pops/melts?
  3. I have never seen temperature written on any electric product. I might have seen resistance on a pair of headphones, but are there any common appliences in our everyday lives at all that also give at what temperature it works with what resistance?
  4. I’m confused about what the book says about the relationship between valence electrons and conductivity. Copper has one valence electron, right? Aren’t there metals that we could use that have more valence electrons and thus better conductivity? Or is copper wire just that much cheaper to produce?

We can harness electric charges and their potentials by artificially creating networks of paths for them in which they can equalize. We call these networks “circuits” and we can use them to create light, among other things.

This is a circuit:
ZTPu6hstSL6NT35.png
Source: https://www.caretxdigital.com/split-ac-outdoor-contactor-wiring-diagram-2/ (2026-09-02)

This is also a circuit:
jVjl88L9jrUzczn.webp
Source: https://stock.adobe.com/in/images/a-complex-electrical-wiring-diagram-with-colorful-wires-circuits-and-components-on-a-white-background-illustrating-a-detailed-schematic-for-an-electronic-system/938846171 (2026-09-02)

In the previous post, we saw how objects or materials can become negatively or positively charged by friction, such as when you - wearing slippers - walk over a carpet: electrons from the carpet are “smeared” onto you, making you negatively charged until you discharge/equalize your potential by touching something that is less negatively charged.

There are canisters/containers that hold opposite charges artificially: batteries. How nifty, that we can carry around canisters of electric potentinal in our pockets!!!

Various batteries:
a34BSuHXBBD1YWj.jpg
Source: https://www.popsci.com/technology/why-so-many-batteries/ (2026-09-02)

In simple terms, batteries contain two chambers with opposite charges, one negative and one positive. To access the charges inside the chambers, we add a gate to each chamber called nodes: one negative and one positive. If the two nodes are in some way connected to each other, a path is created for the charges in the chambers to equalize. That which connects the two nodes is called a “conductor” and it is the potential difference - the voltage - in the charges that drives the equalization. Where there is a potential difference, charges always want to equalize. Connecting two opposite charges this way is one way of creating an electric circuit. When the circuit is closed - when we connect the two opposite charges - a current of these charges in the form of electrons is allowed to flow through the conductor from the negative chamber to the positive chamber. The flow of electrons in a closed circuit, “carrying” charges, is called an electric current and it goes on until the potential difference has been equalized.

Electrons do not move with the speed of light. That which we perceive as an instantaneous effect of closing a circuit, for instance flicking a light switch, is the effect of the flow of electrons. When an electric circuit is closed, an electromagnetic wave propagates all over the circuit. This wave pushes the electrons in the direction of the potential difference - negative to positive - so that the electrons closest to the negative “source” pushes the electrons closest to the positive “end”. This propagation of the electromagnetic wave occurs almost at the speed of light. Saying that “electrons move at the speed of light” is just a simplification.

Open circuit:
jOnH8paEvLPgQgR.jpg
Source: Petzold, Charles. Code: The Hidden Language of Computer Hardware and Software: Second Edition. Pearson Education, Inc. 2023. p22.

Closed circtui:
JIsAbVxSxGRILGG.jpg
Source: ibid.

That which we used to connect the two nodes of the battery is usually made of copper, but different materials are differently good - or bad - at allowing electric current to flow. Electrons orbit the atomic nucleus at various distances, simplified as “shells”. The number of electrons that orbit an atom differs by what basic element that specific atom constitutes. Some elements - or materials - have electrons that are not strongly bound to shells. These materials have “free electrons” or “valence electrons”. Valence electrons in conductors move even when there is no voltage applied, but they move randomly and very slowly. By applying a voltage, we can influence the movement of the electrons.

Valence electrons:
x3PDsfrq0TbpW1f.webp
Source: https://valenceelectrons.com/valence-electrons-of-copper/ (2026-09-01)

Materials that have many valence electrons - often metals - are called conductors and materials that have no valence electrons - such as glass, plastic and ceramic - are called insulators. The ability of a material to allow current is called conductivity and its inability to allow current is called resistivity. One way to picture resistivity is to imagine electrons colliding with other particles, creating friction. High conductivity = low resistivity and vice versa. The resistivity of a material is decided by what material we are talking about, its temperature, length and thickness. Temperature plays a role because heat increases the random movement of electrons. Therefore, resistivity must be given alongside temperature. A short, thick, cool conductor has generally lower resistivity while a long, thin, hot conductor has generally higher resistivity.

Finally, returning to creating light, let’s add a lightbulb between the two nodes of the batteries as in the images above. The filament in traditional lightbulbs is a long, thin piece of material called tungsten, which endures high temperatures. Because the current in a closed circuit - the flow of electrons - continues with the same pressure (voltage) but encounters higher resistance in the filament, only a few electrons are going to be able to pass through it at any given time. The potential is going to equalize at a slower pace. The resistance that the flow of electrons encounters creates heat. Heat increases the resistivity of the filament. This circle continues until the lightbulb reaches its target temperature and emits light. A component in an electric circuit that does “useful work” this way, such as a lightbulb - or its filament - is called a “load”.

Tungsten filament, no current:
9LhnM1OZ3dRfz4I.png
Source: https://tdmfginc.net/product/tungsten-filament/ (2026-09-02)

Tungsten filament, with current:
QjaeVVYFMEVot00.jpg
Source: https://www.azom.com/article.aspx?ArticleID=1538 (2026-09-02)

If the circuit, intentionally or not, is closed before or after the load - in other words bypassing it - a short circuit occurs. Electric current always chooses the path with the least resistance. Because of the low resistance, a surge in current occurs, possibly depleting our batteries very quickly.

To be continued. Meanwhile:

  1. What is the difference between “resistivity” and “resistance”?
  2. “This circle continues until the lightbulb reaches its target temperature and emits light.” This must be an oversimplification for the highschoolers. Couldn’t you just keep increasing the voltage and reach even higher temperatures, even more light, until the filament pops/melts?
  3. I have never seen temperature written on any electric product. I might have seen resistance on a pair of headphones, but are there any common appliences in our everyday lives at all that also give at what temperature it works with what resistance?
  4. I’m confused about what the book says about the relationship between valence electrons and conductivity. Copper has one valence electron, right? Aren’t there metals that we could use that have more valence electrons and thus better conductivity? Or is copper wire just that much cheaper to produce?