showing posts tagged #voltage — clear

0

Electricity basics - Induction

preview

An electron flow - a current - in a conductor can influence the electron spin in neighboring conductors, which in turn yields magnetic fields, as we saw with the solenoid. However, this relationship goes both ways. Magnetic fields can also cause electron flow: if we move a conductor through a magnetic field, the magnetic field will push the electrons in the conductor in a certain direction. Recall that we learned in previous posts that it is voltage that makes current flow. The push - or pressure, if you will - that we exert on the electrons in the conductor by moving it through a magnetic field is also voltage. However, contrary to the voltage that we observed in earlier posts, this voltage is not caused by the difference between two differently charged nodes, as with batteries. In the case, voltage is caused by a force called electromotive force . The end goal - or rather, the result - is nevertheless the same: a current occurs! Now, if we move the conductor through the magnetic field in the opposite direction, the polarity of the voltage and the direction of the current change too. This phenomenon, when a magnetic field influences a conductor so that electric potential occurs, is called induction . One prerequisite for induction is that either the magnetic field or the conductor actually moves.

Y5xrbNQiTWTU4T5.jpg
Source: https://adityaabeysinghepresentations.blogspot.com/2013/11/electromagnetic-induction.html?m=1 (2026-09-09)

Current and voltage that regularly changes direction and polarity is called alternating current, shortened AC, and the opposite is called direct current, or DC.

The magnitude of the induced voltage is subject to:

  • the length of the conductor that “cuts through” the magnetic field lines
  • the velocity at which the field lines are “cut”
  • the density of the magnetic field

If the conductor in which we have induced voltage is part of a closed circuit, the voltage is going to drive current through the circuit. As we already know - both from earlier posts but also from above - current causes magnetic fields to appear around the conductor that leads it. This means that there are two magnetic fields present at induction: one between the poles of the magnet that induces the voltage/current and one around the conductor that we move back and forth between the poles of the magnet. The direction of the induced current - and thus the direction of rotation of the magnetic fields around its conductor - is such that it “collides” with the direction of movement that is otherwise required for the induction to happen. This “collision” or “friction” is similar to what happens when you try to make two magnets of the same polarity touch: they repel! This phenomenon is described in greater detail in Lenz’s Law, but to summarize: the kinetic energi required to move either the magnetic fields past the conductor or the conductor through the magnetic fields is converted into electric energy.

To be continued. Meanwhile:

  1. Are there better expressions in English than “cut” and “cut through” magnetic fields?
  2. I translated the book to saying “density of the magnetic field”, but I am unsure whether this is correct in English. Would “intensity” be better?
  3. I feel uneasy (really intrigued!) when the book makes a connection between kinetic and electric energy, because it makes me wonder: are there conversion tables or the likes? As in, how much power in watts, joules or even calories yields how much electric energy? Wouldn’t that depend on the mass of the, say, inductor that is forced through the magnetic fields? Wouldn’t the strength of the magnetic fields also be a determining factor? Leading, in my head, to the definition: if a conductor of X mass moves through magnetic fields of Y strength with the velocity of Z, then V volts and A amperes are induced.
  4. In other places, I have seen “potential difference”, “electromotive force” and “voltage” being used interchangeably. But after reading the section about induction in this book, it does make me want to separate at the very least the phrases that distinguish how voltage is achieved: by opposite charges (such as in a battery) or by electromotive force as seen in induction…
  5. I was absolutely blown away when I understood what induction is! So much of our appliances seem to be using this technology! Like, the spinning bikes at the gym? I can just imagine there being a bunch of magnets surrounding the wheel looking “outwards”, and pieces of iron all around the wheel itself looking “inward” and as I pedal, the rotation of the wheel induces voltage/current, which turns on the display?! Again, I’m so amped about this. 😆🩷

An electron flow - a current - in a conductor can influence the electron spin in neighboring conductors, which in turn yields magnetic fields, as we saw with the solenoid. However, this relationship goes both ways. Magnetic fields can also cause electron flow: if we move a conductor through a magnetic field, the magnetic field will push the electrons in the conductor in a certain direction. Recall that we learned in previous posts that it is voltage that makes current flow. The push - or pressure, if you will - that we exert on the electrons in the conductor by moving it through a magnetic field is also voltage. However, contrary to the voltage that we observed in earlier posts, this voltage is not caused by the difference between two differently charged nodes, as with batteries. In the case, voltage is caused by a force called electromotive force . The end goal - or rather, the result - is nevertheless the same: a current occurs! Now, if we move the conductor through the magnetic field in the opposite direction, the polarity of the voltage and the direction of the current change too. This phenomenon, when a magnetic field influences a conductor so that electric potential occurs, is called induction . One prerequisite for induction is that either the magnetic field or the conductor actually moves.

Y5xrbNQiTWTU4T5.jpg
Source: https://adityaabeysinghepresentations.blogspot.com/2013/11/electromagnetic-induction.html?m=1 (2026-09-09)

Current and voltage that regularly changes direction and polarity is called alternating current, shortened AC, and the opposite is called direct current, or DC.

The magnitude of the induced voltage is subject to:

  • the length of the conductor that “cuts through” the magnetic field lines
  • the velocity at which the field lines are “cut”
  • the density of the magnetic field

If the conductor in which we have induced voltage is part of a closed circuit, the voltage is going to drive current through the circuit. As we already know - both from earlier posts but also from above - current causes magnetic fields to appear around the conductor that leads it. This means that there are two magnetic fields present at induction: one between the poles of the magnet that induces the voltage/current and one around the conductor that we move back and forth between the poles of the magnet. The direction of the induced current - and thus the direction of rotation of the magnetic fields around its conductor - is such that it “collides” with the direction of movement that is otherwise required for the induction to happen. This “collision” or “friction” is similar to what happens when you try to make two magnets of the same polarity touch: they repel! This phenomenon is described in greater detail in Lenz’s Law, but to summarize: the kinetic energi required to move either the magnetic fields past the conductor or the conductor through the magnetic fields is converted into electric energy.

To be continued. Meanwhile:

  1. Are there better expressions in English than “cut” and “cut through” magnetic fields?
  2. I translated the book to saying “density of the magnetic field”, but I am unsure whether this is correct in English. Would “intensity” be better?
  3. I feel uneasy (really intrigued!) when the book makes a connection between kinetic and electric energy, because it makes me wonder: are there conversion tables or the likes? As in, how much power in watts, joules or even calories yields how much electric energy? Wouldn’t that depend on the mass of the, say, inductor that is forced through the magnetic fields? Wouldn’t the strength of the magnetic fields also be a determining factor? Leading, in my head, to the definition: if a conductor of X mass moves through magnetic fields of Y strength with the velocity of Z, then V volts and A amperes are induced.
  4. In other places, I have seen “potential difference”, “electromotive force” and “voltage” being used interchangeably. But after reading the section about induction in this book, it does make me want to separate at the very least the phrases that distinguish how voltage is achieved: by opposite charges (such as in a battery) or by electromotive force as seen in induction…
  5. I was absolutely blown away when I understood what induction is! So much of our appliances seem to be using this technology! Like, the spinning bikes at the gym? I can just imagine there being a bunch of magnets surrounding the wheel looking “outwards”, and pieces of iron all around the wheel itself looking “inward” and as I pedal, the rotation of the wheel induces voltage/current, which turns on the display?! Again, I’m so amped about this. 😆🩷
0

Electricity basics - The relationship between voltage, current and resistance

preview

In the previous post, we were talking about creating light by leveraging the properties of electricity: voltage, current and resistance. Voltage occurs when two opposite charges consitute a potential difference in a closed circuit. This voltage in turn causes a current - a flow of electrons - in our circuit, flowing from the negative node of the power source to the positive node of the power source. When the current passes through the load of our circuit - a filament made of tungsten in our case with the lightbulb - it encounters high resistance. As current is forced through this high resistance, heat is generated. The increased heat increases the resistivity of the tungsten filament, and vice versa, which at a certain point starts emitting light.

Tungsten filament emitting light:
NmA5cm5sxczeElq.jpg
Source: https://www.azom.com/article.aspx?ArticleID=1538 (2026-09-02)

We can - to some extent - control how much light is emitted by increasing or decreasing the amount of current that flows through the filament. There are two methods for achieving this:

  1. Voltage causes current to flow, which means that if we increase the voltage - and the resistance stays constant - the current also increases, and vice versa.
  2. Resistance hinders the flow of current, which means that if we increase the resistance - and the voltage stays constant - the current decreases, and vice versa. There are - as we discussed earlier - at least three ways to manipulate resistance:
  • choose a material for our conductor/load with greater or lesser resistivity
  • change the length of the conductor/load
  • change the thickness of the conductor/load

To summarize, we can regulate current by changing voltage if resistance stays the same or by changing resistance if voltage stays the same. This relationship between these three characteristics of electricity is expressed and explained by Ohm’s Law. One takeaway from Ohm’s Law gives us a means to calculate any one of these three properties if two of them are known. This relationship can be represented with the following triangle, which also gives us what arithmetics should be performed on the properties and in what order to find the value of which property.

Ohm’s Law expressed with a triangle:
hCz9RiBGomq7DfL.png
Source: https://www.inchcalculator.com/ohms-law-calculator/ (2026-09-02)

A few notes:

  • Voltage/V is sometimes expressed as “E”, which is the first letter in “electromotive force”, which helps us visualize how voltage actually drives, “motivates” or gives “motion” to current. It can also be represented by “U”.
  • Current is represented by “I”, which comes from the French phrase intensité du courant (current intensity).

To be continued. Meanwhile:

  1. Where does the “U” come from? It seems to be an international standardization for symbolizing voltage.

In the previous post, we were talking about creating light by leveraging the properties of electricity: voltage, current and resistance. Voltage occurs when two opposite charges consitute a potential difference in a closed circuit. This voltage in turn causes a current - a flow of electrons - in our circuit, flowing from the negative node of the power source to the positive node of the power source. When the current passes through the load of our circuit - a filament made of tungsten in our case with the lightbulb - it encounters high resistance. As current is forced through this high resistance, heat is generated. The increased heat increases the resistivity of the tungsten filament, and vice versa, which at a certain point starts emitting light.

Tungsten filament emitting light:
NmA5cm5sxczeElq.jpg
Source: https://www.azom.com/article.aspx?ArticleID=1538 (2026-09-02)

We can - to some extent - control how much light is emitted by increasing or decreasing the amount of current that flows through the filament. There are two methods for achieving this:

  1. Voltage causes current to flow, which means that if we increase the voltage - and the resistance stays constant - the current also increases, and vice versa.
  2. Resistance hinders the flow of current, which means that if we increase the resistance - and the voltage stays constant - the current decreases, and vice versa. There are - as we discussed earlier - at least three ways to manipulate resistance:
  • choose a material for our conductor/load with greater or lesser resistivity
  • change the length of the conductor/load
  • change the thickness of the conductor/load

To summarize, we can regulate current by changing voltage if resistance stays the same or by changing resistance if voltage stays the same. This relationship between these three characteristics of electricity is expressed and explained by Ohm’s Law. One takeaway from Ohm’s Law gives us a means to calculate any one of these three properties if two of them are known. This relationship can be represented with the following triangle, which also gives us what arithmetics should be performed on the properties and in what order to find the value of which property.

Ohm’s Law expressed with a triangle:
hCz9RiBGomq7DfL.png
Source: https://www.inchcalculator.com/ohms-law-calculator/ (2026-09-02)

A few notes:

  • Voltage/V is sometimes expressed as “E”, which is the first letter in “electromotive force”, which helps us visualize how voltage actually drives, “motivates” or gives “motion” to current. It can also be represented by “U”.
  • Current is represented by “I”, which comes from the French phrase intensité du courant (current intensity).

To be continued. Meanwhile:

  1. Where does the “U” come from? It seems to be an international standardization for symbolizing voltage.
0

Electricity basics - Electric equilibrium

preview

The core, the nucleus, of an atom consists of positively charged protons and of neutrons that do not have any charge. The nucleus in its entirety is considered to be positively charged. Surrounding the atomic nucleus is a cloud of electrons. Electrons are negatively charged. If the number of electrons are the same as the number of protons, then the atom is electrically neutral. There is electric equilibrium.

C2FyELcFNEiB3zc.jpg
Source: https://www.sciencefacts.net/atom-2.html (2026-08-31)

This equilibrium can change. This happens when the number of electrons is unequal to the number of protons. The atom is then called an ion. If there are more electrons than protons, the ion is negatively charged. If there are less electrons than protons, the ion is positively charged.

AfLAuzrLwBINjCs.png
Source: https://sciencenotes.org/what-is-the-difference-between-an-atom-and-an-ion/ (2026-08-31)

Any object or material that contains ions is no longer electrically neutral. It has an electric charge or “potential”. Between to differently charged objects or materia, there is potential difference or “voltage”. This electric imbalance always wants to equalize: atoms “want to be” neutral. Ions are either going to give away or receive the amount of electrons needed to achieve this equilibrium. This happens when two differently charged objects or materia directly touch or it can happen by influence in an electric field. Until a charge is equalized it remains and is considered static.

An example of charges equalizing by direct contact is when two differently charged people touch each other and experience a shock. Or when you happen to have collected an abundance of electrons, thus creating negative ions, and then you touch a differently charged object. Ouch (sometimes).

j3lxxyuULWD4OqP.webp
Source: https://thors.com/manufacturing-courses/manufactured-products/electrical-and-electronics/electrostatic-discharge-esd-basics/ (2026-08-31)

An example of charges equalizing through electric fields is lightning striking the ground. The potential difference between clouds and the ground grows so big that matter between them is ionized and finally, when the potentinal difference is big enough, the charges equalize in the form of visible current - lightning ⚡.

V3pPHL4zmzbFJoK.png
Source: https://www.savemyexams.com/igcse/physics/oxford-aqa/16/revision-notes/electricity-and-magnetism/electrical-circuits/static-electricity/ (2026-08-31)

Another example is dust particles pulled towards oppositely charged electric devices in your home. Or styrofoam on a cat.

dXhOKZHzGMSKNVZ.jpg
Source: https://commons.wikimedia.org/w/index.php?curid=60287175 (2026-08-31)

To be continued. Meanwhile, some questions that popped up:

  1. What determines the amount of voltage needed for a current to discharge in a scenario where the opposite charges never touch but only ever interact through the electric field? Some assumptions of mine: distance to each other, (air) humidity, medium (air, vacuum, other), resistance, interference from other electromagnetic waves…?
  2. What creates ions, except for the above mentioned physical friction? What natural phenomenon or scenarios kick electrons off or shoves them onto atoms? Is this what we artificially do in batteries? Creating negative and positive ions to create voltage?

The core, the nucleus, of an atom consists of positively charged protons and of neutrons that do not have any charge. The nucleus in its entirety is considered to be positively charged. Surrounding the atomic nucleus is a cloud of electrons. Electrons are negatively charged. If the number of electrons are the same as the number of protons, then the atom is electrically neutral. There is electric equilibrium.

C2FyELcFNEiB3zc.jpg
Source: https://www.sciencefacts.net/atom-2.html (2026-08-31)

This equilibrium can change. This happens when the number of electrons is unequal to the number of protons. The atom is then called an ion. If there are more electrons than protons, the ion is negatively charged. If there are less electrons than protons, the ion is positively charged.

AfLAuzrLwBINjCs.png
Source: https://sciencenotes.org/what-is-the-difference-between-an-atom-and-an-ion/ (2026-08-31)

Any object or material that contains ions is no longer electrically neutral. It has an electric charge or “potential”. Between to differently charged objects or materia, there is potential difference or “voltage”. This electric imbalance always wants to equalize: atoms “want to be” neutral. Ions are either going to give away or receive the amount of electrons needed to achieve this equilibrium. This happens when two differently charged objects or materia directly touch or it can happen by influence in an electric field. Until a charge is equalized it remains and is considered static.

An example of charges equalizing by direct contact is when two differently charged people touch each other and experience a shock. Or when you happen to have collected an abundance of electrons, thus creating negative ions, and then you touch a differently charged object. Ouch (sometimes).

j3lxxyuULWD4OqP.webp
Source: https://thors.com/manufacturing-courses/manufactured-products/electrical-and-electronics/electrostatic-discharge-esd-basics/ (2026-08-31)

An example of charges equalizing through electric fields is lightning striking the ground. The potential difference between clouds and the ground grows so big that matter between them is ionized and finally, when the potentinal difference is big enough, the charges equalize in the form of visible current - lightning ⚡.

V3pPHL4zmzbFJoK.png
Source: https://www.savemyexams.com/igcse/physics/oxford-aqa/16/revision-notes/electricity-and-magnetism/electrical-circuits/static-electricity/ (2026-08-31)

Another example is dust particles pulled towards oppositely charged electric devices in your home. Or styrofoam on a cat.

dXhOKZHzGMSKNVZ.jpg
Source: https://commons.wikimedia.org/w/index.php?curid=60287175 (2026-08-31)

To be continued. Meanwhile, some questions that popped up:

  1. What determines the amount of voltage needed for a current to discharge in a scenario where the opposite charges never touch but only ever interact through the electric field? Some assumptions of mine: distance to each other, (air) humidity, medium (air, vacuum, other), resistance, interference from other electromagnetic waves…?
  2. What creates ions, except for the above mentioned physical friction? What natural phenomenon or scenarios kick electrons off or shoves them onto atoms? Is this what we artificially do in batteries? Creating negative and positive ions to create voltage?