0

a website for visualizing electromagnetism

preview

cross-posted from: lemmus.org/post/26646894

a website to help students visualize the electromagnetic field

I’ve been building this simulator as a side project aimed to help students understand and visualize electromagnetic phenomena such as radiation, near field effects, polarization, wave interference and diffraction.

You can:

  • place multiple, diffrent radiation sources and set their parameters (geometery, amplitude, phase and more)
  • place perefect wire conductors, PEC plane and poke slots in the plane to create diffraction patterns
  • observe the electric field, magnetic field, energy flow field, energy density or radiation pattern
  • zoom in and out and translate the canvas
  • change the simulation resolution, frequency and propogation speed and some other parameters

I hope someone might find it useful and I’d love to hear what people think :)

What do you think I should add?

Live:
www.antennasim.com

GitHub:

github.com/rotemTsafrir/antenna_sim

cross-posted from: lemmus.org/post/26646894

a website to help students visualize the electromagnetic field

I’ve been building this simulator as a side project aimed to help students understand and visualize electromagnetic phenomena such as radiation, near field effects, polarization, wave interference and diffraction.

You can:

  • place multiple, diffrent radiation sources and set their parameters (geometery, amplitude, phase and more)
  • place perefect wire conductors, PEC plane and poke slots in the plane to create diffraction patterns
  • observe the electric field, magnetic field, energy flow field, energy density or radiation pattern
  • zoom in and out and translate the canvas
  • change the simulation resolution, frequency and propogation speed and some other parameters

I hope someone might find it useful and I’d love to hear what people think :)

What do you think I should add?

Live:
www.antennasim.com

GitHub:

github.com/rotemTsafrir/antenna_sim

0

Bill Hammock (a.k.a. the engineer guy) made another video! This one's about copper.

play · youtube.com
YouTube The Engineering of Copper Extraction www.youtube.com
preview

He doesn’t make a ton of content but what he does make is (I think) very good and his backlog is worth a dive if you’re not already familiar. I like his aluminum can video

He doesn’t make a ton of content but what he does make is (I think) very good and his backlog is worth a dive if you’re not already familiar. I like his aluminum can video

0

im looking to engineer a wizard staff using science.

preview

this is not for cosplay or comidy. im looking to make a device that can cast spells. lazy answers and sarcasm please leave. for the first device im looking for 3 spells. this project is ment to open minds to new possabilities and get peaple used to looking at wonders and asking how do i do that. origal idea came from how do dragons work? please if you up for dialog. feel free to comment.

this is not for cosplay or comidy. im looking to make a device that can cast spells. lazy answers and sarcasm please leave. for the first device im looking for 3 spells. this project is ment to open minds to new possabilities and get peaple used to looking at wonders and asking how do i do that. origal idea came from how do dragons work? please if you up for dialog. feel free to comment.

0

Hello from Chemical Engineering!

preview

👋 Hey engineers!

I’ve just started a dedicated community for process and chemical engineering:

👉 !ChemicalEngineering@lemmy.world

If you’re into industrial chemistry, process design, thermodynamics, safety engineering, separation technologies, energy systems or plant optimization –> this is the place to be.

👋 Hey engineers!

I’ve just started a dedicated community for process and chemical engineering:

👉 !ChemicalEngineering@lemmy.world

If you’re into industrial chemistry, process design, thermodynamics, safety engineering, separation technologies, energy systems or plant optimization –> this is the place to be.

0

ball Python enclosure problem

preview

So I’m hoping this is the right place for this, but I think i have a problem that y’all can help with. I have a 3.5-4ft ball python (Oli Syyyykes) in a 40 gal wide glass tank. Ik its too small, but im actively looking for a bettet enclosure for her. So. My question is can I take 2 40gal wide tanks and use aquarium silicone to somehow connect the 2 and make a massive space for her? I know that I would need to make a custom lid and it would probably need a support bar across the top. What do y’all think? Is this a ridiculous stoner idea? TIA

So I’m hoping this is the right place for this, but I think i have a problem that y’all can help with. I have a 3.5-4ft ball python (Oli Syyyykes) in a 40 gal wide glass tank. Ik its too small, but im actively looking for a bettet enclosure for her. So. My question is can I take 2 40gal wide tanks and use aquarium silicone to somehow connect the 2 and make a massive space for her? I know that I would need to make a custom lid and it would probably need a support bar across the top. What do y’all think? Is this a ridiculous stoner idea? TIA

0

Demonstration of pilot oxygen mask by Airbus test pilot

preview

This design is incredibly clever. I assume Boeing and other companies use similar masks? Maybe someone here knows more about commercial aviation than I do and can chime in.

Apparently Collins Aerospace makes them, or at least a version of them:
https://www.collinsaerospace.com/what-we-do/industries/military-and-defense/oxygen-and-psu-systems/crew-oxygen-systems/crew-masks/sweep-on-fullface-oxygen-mask

Video source: https://youtu.be/mgLSTimJ868

This design is incredibly clever. I assume Boeing and other companies use similar masks? Maybe someone here knows more about commercial aviation than I do and can chime in.

Apparently Collins Aerospace makes them, or at least a version of them:
https://www.collinsaerospace.com/what-we-do/industries/military-and-defense/oxygen-and-psu-systems/crew-oxygen-systems/crew-masks/sweep-on-fullface-oxygen-mask

Video source: https://youtu.be/mgLSTimJ868

0

Wire routing porn

preview

So clean. So orderly. This is pure satisfaction.

The photo is from the Hanford B Reactor in Washington state, USA.

Source: https://www.spokesman.com/picture-stories/2014/aug/10/hanford-tour/

So clean. So orderly. This is pure satisfaction.

The photo is from the Hanford B Reactor in Washington state, USA.

Source: https://www.spokesman.com/picture-stories/2014/aug/10/hanford-tour/

0

Looking for Engineering idea for a harness to pull a cart

preview

I have an elderly dog with a broken leg. Back in late 2019 I started hiking down by the river with the dog and have continued to this day. However she broke her leg, and then had to have surgery to add a plate, she is still unable to walk much during the healing. So I purchased a garden cart to tote her with us (my wife and my dog), but the extra weight and the quick harness I made are starting to make it too difficult.

Currently I have two equal length leashes attached to a clip on the handle.

The leashes crisscross my chest like Sean Connery’s bandoliers.

I have been thinking about maybe some replacement backpack straps, but I am unsure what to do with them on the back. Maybe a rope web of some sort, that attaches to the cart handle?

If anyone has any ideas, I would love to hear them, because I have a feeling even after her leg is healed I will still be carting her around for at least some of the hike.

Edit to add a picture of said dog, Mocha, this morning.

I have an elderly dog with a broken leg. Back in late 2019 I started hiking down by the river with the dog and have continued to this day. However she broke her leg, and then had to have surgery to add a plate, she is still unable to walk much during the healing. So I purchased a garden cart to tote her with us (my wife and my dog), but the extra weight and the quick harness I made are starting to make it too difficult.

Currently I have two equal length leashes attached to a clip on the handle.

The leashes crisscross my chest like Sean Connery’s bandoliers.

I have been thinking about maybe some replacement backpack straps, but I am unsure what to do with them on the back. Maybe a rope web of some sort, that attaches to the cart handle?

If anyone has any ideas, I would love to hear them, because I have a feeling even after her leg is healed I will still be carting her around for at least some of the hike.

Edit to add a picture of said dog, Mocha, this morning.

0

What tools can you use to model 3d pressure/fluid dynamics?

preview

I’m fascinated by the youtube videos of “the spike” where circular waves can be used to create a pressure spike that asymptotes at the center, example: www.youtube.com/watch?v=iWKFPTgkpXo

In my mind, this makes sense for an essentially 2d scenario…but why can’t it be expanded to 3d? Could you do this with gasses? Could you make some theoretical spherical chamber with, as an over-simplification, soccer-ball shaped pistons to create some asymptotically high pressure spike at the center? Could you modify parameters like piston extension distance, chamber radius, and temperature to create conditions to generate things like crystals found in the earth, like those industrial diamond making machines? Does creating asymptotically high pressures momentarily reduce the complexity of chambers needed to withstand those pressures, as the pressures near the outside would be much lower? Heck, could you create conditions wild enough at the center to bring things like fusion into range of ignition with supplemental lasers or something?

I want to play with this idea by throwing some numbers around and simulating, but this kind of thing is totally new to me and I wouldn’t know where to start to explore this curiosity. Is there any place for someone to do some beginner physics simulating?

I’m fascinated by the youtube videos of “the spike” where circular waves can be used to create a pressure spike that asymptotes at the center, example: www.youtube.com/watch?v=iWKFPTgkpXo

In my mind, this makes sense for an essentially 2d scenario…but why can’t it be expanded to 3d? Could you do this with gasses? Could you make some theoretical spherical chamber with, as an over-simplification, soccer-ball shaped pistons to create some asymptotically high pressure spike at the center? Could you modify parameters like piston extension distance, chamber radius, and temperature to create conditions to generate things like crystals found in the earth, like those industrial diamond making machines? Does creating asymptotically high pressures momentarily reduce the complexity of chambers needed to withstand those pressures, as the pressures near the outside would be much lower? Heck, could you create conditions wild enough at the center to bring things like fusion into range of ignition with supplemental lasers or something?

I want to play with this idea by throwing some numbers around and simulating, but this kind of thing is totally new to me and I wouldn’t know where to start to explore this curiosity. Is there any place for someone to do some beginner physics simulating?

0

Building a DIY solar panel mount: how would I calculate the parameters for a linear actuator to tilt the panels between completely horizontal and vertical?

preview

Terrible diagram 1

I’m trying to figure out how long to make A and B here if I have linear actuator of length C (extended = 2C) in order to tilt my panels from completely horizontal to vertical so they avoid wind and shed snow respectively when I run up the actuator to the extremes respectively based on sensor input.

Is there a simple formula I can use to plug the length of whatever actuator I settle on to figure A and B out? I know it will have to be a certain minimum and maximum size to work properly and might have to experiment to get an idea of what works in the end, but I’d like a reasonable start point to purchase an appropriate actuator.

I’ve googled around and decided I’m not smart enough to even come up with the right search criteria, let alone figure this out myself since it’s been 35 years since I’ve used anything except the most basic trig.

This isn’t really homework except for the fact that I’m trying to make my home work right.

Edit: seems like if I select A=.75C and solve for B at horizontal, then it always works out. No idea why, but the couple examples I try seem to agree.

Terrible diagram 1

I’m trying to figure out how long to make A and B here if I have linear actuator of length C (extended = 2C) in order to tilt my panels from completely horizontal to vertical so they avoid wind and shed snow respectively when I run up the actuator to the extremes respectively based on sensor input.

Is there a simple formula I can use to plug the length of whatever actuator I settle on to figure A and B out? I know it will have to be a certain minimum and maximum size to work properly and might have to experiment to get an idea of what works in the end, but I’d like a reasonable start point to purchase an appropriate actuator.

I’ve googled around and decided I’m not smart enough to even come up with the right search criteria, let alone figure this out myself since it’s been 35 years since I’ve used anything except the most basic trig.

This isn’t really homework except for the fact that I’m trying to make my home work right.

Edit: seems like if I select A=.75C and solve for B at horizontal, then it always works out. No idea why, but the couple examples I try seem to agree.

0

Need some advice on creating a waterproof container that allows for a sliding stainless steel rod

preview

Hello lemgineers!

I’m working on designing a claw that can be operated underwater. The plan is to use a linear actuator in a waterproof housing. The main issue is allowing the shaft to slide through without causing a leak. What’s the best way to go about this?

Hello lemgineers!

I’m working on designing a claw that can be operated underwater. The plan is to use a linear actuator in a waterproof housing. The main issue is allowing the shaft to slide through without causing a leak. What’s the best way to go about this?

0

Animation: The World's Biggest Wind Turbines

Visual Capitalist %%title%% %%page%% www.visualcapitalist.com
preview

An animation of the world’s largest wind turbines

This is the second of two wind turbine posts inspired by this recent good news: https://slrpnk.net/post/7625300

An animation of the world’s largest wind turbines

This is the second of two wind turbine posts inspired by this recent good news: https://slrpnk.net/post/7625300

0

Great channel to learn about AC machines

preview

I just started getting interested in synchronous machines, and this channel really did it for me. Great for anyone studying engineering, or anyone interested with a high school/first year university physics background.

I just started getting interested in synchronous machines, and this channel really did it for me. Great for anyone studying engineering, or anyone interested with a high school/first year university physics background.