0

Welcome to the Gunpla Community! New to Gunpla? Start here!

preview

Welcome to the Gunpla community on Lemmy! This is the place where we fuel our plastic addiction enjoy our mecha modeling hobby and tell ourselves that getting one more kit for the backlog will be fine.

TL;DR - Gunpla is easy to get into, and can be a very fun and satisfying hobby. If you want a simple kit to start, look for an Entry Grade (no tools required) or High Grade (nippers required). If you see a kit that looks cool, go for it, as none of them are that difficult.

Gunpla is a portmanteau of Gundam and plastic, and technically refers to official Gundam model kits produced by Bandai, but is sometimes used to refer to any mecha model kit (also referred to as plamo, plastic model). From here on out, when I say Gunpla, I will be referring to Bandai’s official Gundam model kits. Pieces for kits come connected to plastic frames, called runners (or sprue, depending on which modeling community you look at) and must be cut out in order to build the model. Gunpla differentiates itself from other types of models (cars, ships, military, etc) by being highly articulate and having a low barrier of entry, since nearly all Gunpla kits only require means to cut the pieces from their runners, most comonly done so with model nippers, sometimes referred to as side cutters. You can of course use other methods to process the pieces and customize as you build the model (sanding, filing, painting, etc), but none of that is required to build a fully articulate, (mostly) color accurate model right out of the box.

Sound cool? Not sure where to start? Read on!

Gunpla kits come in a variety of scales and grades. The cost of kits can vary greatly even within a certain grade, but generally, as far as this list goes, the lower ones will cost more than the higher ones. The most common scales and grades are listed here:

1/144 scale - roughly 5.5"/14cm tall

1/100 scale - roughly 8"/20cm tall

1/60 scale - roughly 12"/30cm tall

Entry Grade - 1/144 scale - This line is designed for beginners. The kits are relatively simple to build, inexpensive, and have little to no color-correcting stickers. They also don’t require any tools, as the pieces on the runners are designed to be popped off with your fingers.

Super Deformed “SD” - non-scale - This line of kits are simple to build, and the models are “chibi”, where they have a short stature with short limbs and a large head. Like Entry Grade kits, they don’t require any tools to build.

High Grade “HG” - 1/144 scale - This line is on the simpler side of complexity, and the kits are designed to resemble their anime counterparts. This is by far the largest line.

Real Grade “RG” - 1/144 scale - This line is more complex than the previous lines and contain more “gimmicks” (things like opening hatches, moving pistons, etc). Their design is very intricate, and they are modeled after what they would look like if they were actually real (or are real, as there are some 1:1 statues of Gundams in Japan, China, and other places). Because of their size and amount of detail, many have very small pieces.

Master Grade “MG” - 1/100 scale - This line is typically more complex than RG kits, and usually offer more detail and gimmicks since they are larger. Some of the older MG kits make use of screws (included), so a screwdriver would be needed in addition to nippers.

Perfect Grade “PG” - 1/60 scale - This is the largest scale, offering more detail and gimmicks than most MG kits. Some of these kits come with LEDs to install, and others have a LED kit sold separately. Some of the older PG kits also make use of screws (included).

The vast majority of Gunpla kits are produced in Japan with Japanese builders in mind, so the instruction booklets are in Japanese. In the past 7-8 years or so, they have also been printing notes in English, as well. Regardless of the languages you can or can’t read, the steps in the instructions are clear and easy to follow, and make use of symbols to dictate what you are meant to do in a given step. Examples of this would be “attach this piece first”, “do this to both sides”, or “pay close attention here”. A translation app on your phone, like Google Lens can also be helpful if you get stuck.

Where to get Gunpla:

Disclaimer - I am in the USA, so my knowledge is mostly limited to what’s available here. That said, everything I list here is somewhere I have ordered from and can vouch for their legitimacy.

  • Your local hobby shop. Check what’s around in your area and see what they offer. Buying local is good :). You also may get lucky if you have anime or other similar specialty stores in your area.
  • mechawarehouse.com
  • www.gundampros.shop
  • www.usagundamstore.com
  • galactictoys.com
  • leapingpandahobbies.com
  • www.gundamplanet.com
  • newtype.us
  • trinityhobby.com - based in Canada
  • www.hlj.com - based in Japan, so prices are typically less expensive than what can be found in the west. That said, shipping is extremely expensive. This could still be an option depending on where you are located if you are out of alternatives. Link to their shipping methods and countries: www.hlj.com/shipping-from-hobbylink-japan/
  • www.suruga-ya.com/en - This is a second-hand chain of stores based in Japan. They ship to many countries (www.suruga-ya.com/en/feature/…/index.html) and offer free shipping regularly, starting at Saturday 10AM and ending Thursday 6PM JST. The site is machine translated, so browsing and searching has a learning curve. This link will get you to the Gunpla section: www.suruga-ya.com/en/category/50104?genre=Gundam. The vast majority of the kits are labeled as “used”, but don’t worry, the runners are inspected and should come in like-new condition in their bags. I have placed many orders and have yet to have an issue with missing pieces or already-built kits. Also, if you are ordering internationally, I advise using Paypal for your first order, to avoid your order being flagged for fraud. Subsequent orders are fine with other payment methods.
  • www.amazon.com - I’m sure everyone knows this one. Gunpla is sold here, but beware of how much you are spending, as prices can be inflated. I have ordered several kits from various sellers and haven’t had any issues, but I know a couple others who have. Standard Amazon BS. If you want to order a kit here, I advise checking the price against other sources to avoid overpaying.
  • www.hobbylobby.com - I know a lot of people don’t like this company, but I feel it’s worth mentioning anyways. Their kits are marked up over standard retail price, but they run a 40% off sale every other week. This takes the price down to roughly 25-30% off retail. Check their Weekly Ad section on their site to see if they are running the sale on a given week. I strongly advise against ordering online, as you are NOT guaranteed to receive the exact kit you ordered. Check their retail stores instead.

/r/Gunpla on Reddit has a much more comprehensive list of shops if my list doesn’t cover you: www.reddit.com/r/Gunpla/wiki/shopping/

Once you find potential sources of Gunpla, I advise getting on their mailing lists, as the majority that I have dealt with run sales and other promotions at least semi-frequently, especially around holidays.

This should be enough information to get you started. If you have any questions, feel free to post them here or in the pinned weekly discussion thread. Have fun!

Welcome to the Gunpla community on Lemmy! This is the place where we fuel our plastic addiction enjoy our mecha modeling hobby and tell ourselves that getting one more kit for the backlog will be fine.

TL;DR - Gunpla is easy to get into, and can be a very fun and satisfying hobby. If you want a simple kit to start, look for an Entry Grade (no tools required) or High Grade (nippers required). If you see a kit that looks cool, go for it, as none of them are that difficult.

Gunpla is a portmanteau of Gundam and plastic, and technically refers to official Gundam model kits produced by Bandai, but is sometimes used to refer to any mecha model kit (also referred to as plamo, plastic model). From here on out, when I say Gunpla, I will be referring to Bandai’s official Gundam model kits. Pieces for kits come connected to plastic frames, called runners (or sprue, depending on which modeling community you look at) and must be cut out in order to build the model. Gunpla differentiates itself from other types of models (cars, ships, military, etc) by being highly articulate and having a low barrier of entry, since nearly all Gunpla kits only require means to cut the pieces from their runners, most comonly done so with model nippers, sometimes referred to as side cutters. You can of course use other methods to process the pieces and customize as you build the model (sanding, filing, painting, etc), but none of that is required to build a fully articulate, (mostly) color accurate model right out of the box.

Sound cool? Not sure where to start? Read on!

Gunpla kits come in a variety of scales and grades. The cost of kits can vary greatly even within a certain grade, but generally, as far as this list goes, the lower ones will cost more than the higher ones. The most common scales and grades are listed here:

1/144 scale - roughly 5.5"/14cm tall

1/100 scale - roughly 8"/20cm tall

1/60 scale - roughly 12"/30cm tall

Entry Grade - 1/144 scale - This line is designed for beginners. The kits are relatively simple to build, inexpensive, and have little to no color-correcting stickers. They also don’t require any tools, as the pieces on the runners are designed to be popped off with your fingers.

Super Deformed “SD” - non-scale - This line of kits are simple to build, and the models are “chibi”, where they have a short stature with short limbs and a large head. Like Entry Grade kits, they don’t require any tools to build.

High Grade “HG” - 1/144 scale - This line is on the simpler side of complexity, and the kits are designed to resemble their anime counterparts. This is by far the largest line.

Real Grade “RG” - 1/144 scale - This line is more complex than the previous lines and contain more “gimmicks” (things like opening hatches, moving pistons, etc). Their design is very intricate, and they are modeled after what they would look like if they were actually real (or are real, as there are some 1:1 statues of Gundams in Japan, China, and other places). Because of their size and amount of detail, many have very small pieces.

Master Grade “MG” - 1/100 scale - This line is typically more complex than RG kits, and usually offer more detail and gimmicks since they are larger. Some of the older MG kits make use of screws (included), so a screwdriver would be needed in addition to nippers.

Perfect Grade “PG” - 1/60 scale - This is the largest scale, offering more detail and gimmicks than most MG kits. Some of these kits come with LEDs to install, and others have a LED kit sold separately. Some of the older PG kits also make use of screws (included).

The vast majority of Gunpla kits are produced in Japan with Japanese builders in mind, so the instruction booklets are in Japanese. In the past 7-8 years or so, they have also been printing notes in English, as well. Regardless of the languages you can or can’t read, the steps in the instructions are clear and easy to follow, and make use of symbols to dictate what you are meant to do in a given step. Examples of this would be “attach this piece first”, “do this to both sides”, or “pay close attention here”. A translation app on your phone, like Google Lens can also be helpful if you get stuck.

Where to get Gunpla:

Disclaimer - I am in the USA, so my knowledge is mostly limited to what’s available here. That said, everything I list here is somewhere I have ordered from and can vouch for their legitimacy.

  • Your local hobby shop. Check what’s around in your area and see what they offer. Buying local is good :). You also may get lucky if you have anime or other similar specialty stores in your area.
  • mechawarehouse.com
  • www.gundampros.shop
  • www.usagundamstore.com
  • galactictoys.com
  • leapingpandahobbies.com
  • www.gundamplanet.com
  • newtype.us
  • trinityhobby.com - based in Canada
  • www.hlj.com - based in Japan, so prices are typically less expensive than what can be found in the west. That said, shipping is extremely expensive. This could still be an option depending on where you are located if you are out of alternatives. Link to their shipping methods and countries: www.hlj.com/shipping-from-hobbylink-japan/
  • www.suruga-ya.com/en - This is a second-hand chain of stores based in Japan. They ship to many countries (www.suruga-ya.com/en/feature/…/index.html) and offer free shipping regularly, starting at Saturday 10AM and ending Thursday 6PM JST. The site is machine translated, so browsing and searching has a learning curve. This link will get you to the Gunpla section: www.suruga-ya.com/en/category/50104?genre=Gundam. The vast majority of the kits are labeled as “used”, but don’t worry, the runners are inspected and should come in like-new condition in their bags. I have placed many orders and have yet to have an issue with missing pieces or already-built kits. Also, if you are ordering internationally, I advise using Paypal for your first order, to avoid your order being flagged for fraud. Subsequent orders are fine with other payment methods.
  • www.amazon.com - I’m sure everyone knows this one. Gunpla is sold here, but beware of how much you are spending, as prices can be inflated. I have ordered several kits from various sellers and haven’t had any issues, but I know a couple others who have. Standard Amazon BS. If you want to order a kit here, I advise checking the price against other sources to avoid overpaying.
  • www.hobbylobby.com - I know a lot of people don’t like this company, but I feel it’s worth mentioning anyways. Their kits are marked up over standard retail price, but they run a 40% off sale every other week. This takes the price down to roughly 25-30% off retail. Check their Weekly Ad section on their site to see if they are running the sale on a given week. I strongly advise against ordering online, as you are NOT guaranteed to receive the exact kit you ordered. Check their retail stores instead.

/r/Gunpla on Reddit has a much more comprehensive list of shops if my list doesn’t cover you: www.reddit.com/r/Gunpla/wiki/shopping/

Once you find potential sources of Gunpla, I advise getting on their mailing lists, as the majority that I have dealt with run sales and other promotions at least semi-frequently, especially around holidays.

This should be enough information to get you started. If you have any questions, feel free to post them here or in the pinned weekly discussion thread. Have fun!

0

Representing Neo-Germany, give it up for ~~Shadow~~ Gundam Spiegel!

preview

Ah, Schwarz Bruder, practitioner of that most traditional of German arts, ninjitsu…

Anyway, this arrived from P-Bandai last week. Like all the other P-Bandai HGFC kits, it comes with a custom color action base 5, but I’ve got it on a rotating base that also comes with the kit instead of the normal action base display arms. It’s supposed to be for recreating the Sturm and Drang attack, but as you can see I opted to go with the ninja scroll display.

As with the other HGFC kits, this was a pretty easy build with good color separation. Aside from the eyes and head sensor stickers common to most gunpla, the only other stickers used are for the core lander canopy and some yellow bits on the back skirt. Almost everything else works as is, with the sole exception of the kunai. They’re actually a extra pair of hands unique to this kit, so the kunai are the same color as the hands and needed to be painted. In addition, the kit comes with the normal gripping hands, a pair of open claw hands, a pair of kung fu knife hands (because G Gundam) and another unique hand for holding a rolled up scroll.

Which brings me to my one complaint with this kit. The scrolls. They’re cool, don’t get me wrong. Each one is themed around a different element (fire, water, wind, earth, wood) with a unique German koan of some sort for each element and a drawing of a different elemental (salamander, undine, silph, gnome, dryad respectively). And the whole unfurling scrolls display looks amazing. But the frames that you’re supposed to attach the scrolls to only have some tiny tabs to hold the paper in place, and they suck at it. I got tired of the scrolls repeatedly popping out and used Scotch tape to stick the paper to the frames. So, if you’ve got this kit on order, that’s something to keep in mind.

All in all, though, I do like the kit. That said, Rising Gundam when, Bandai?

Ah, Schwarz Bruder, practitioner of that most traditional of German arts, ninjitsu…

Anyway, this arrived from P-Bandai last week. Like all the other P-Bandai HGFC kits, it comes with a custom color action base 5, but I’ve got it on a rotating base that also comes with the kit instead of the normal action base display arms. It’s supposed to be for recreating the Sturm and Drang attack, but as you can see I opted to go with the ninja scroll display.

As with the other HGFC kits, this was a pretty easy build with good color separation. Aside from the eyes and head sensor stickers common to most gunpla, the only other stickers used are for the core lander canopy and some yellow bits on the back skirt. Almost everything else works as is, with the sole exception of the kunai. They’re actually a extra pair of hands unique to this kit, so the kunai are the same color as the hands and needed to be painted. In addition, the kit comes with the normal gripping hands, a pair of open claw hands, a pair of kung fu knife hands (because G Gundam) and another unique hand for holding a rolled up scroll.

Which brings me to my one complaint with this kit. The scrolls. They’re cool, don’t get me wrong. Each one is themed around a different element (fire, water, wind, earth, wood) with a unique German koan of some sort for each element and a drawing of a different elemental (salamander, undine, silph, gnome, dryad respectively). And the whole unfurling scrolls display looks amazing. But the frames that you’re supposed to attach the scrolls to only have some tiny tabs to hold the paper in place, and they suck at it. I got tired of the scrolls repeatedly popping out and used Scotch tape to stick the paper to the frames. So, if you’ve got this kit on order, that’s something to keep in mind.

All in all, though, I do like the kit. That said, Rising Gundam when, Bandai?

0

[30MS - FGO] Shielder-Mash Kyrielight

preview

Hey there! Sorry if it feels I’m spamming, but no one else is sharing their builds. Anyways, this time is a 30MS build, a collabo with Fate Grand Order. To be honest, I haven’t played FGO, only knowing the brand through Stay Night, but I couldn’t resist a girl in armor (they’re so cool!)

To be fair, while the model looks great once finished, and some of the armor parts are great and I can see myself modding them unto other builds, there are some design choices that make this build less than stellar. Some of the joints are weak, the clothes greatly limit leg mobility, and that shield, oh the shield! Amazing to look at, but too heavy for the model. You do need a separate stand for it if you want to pose it as anything else but the basis pose.

All in all, a good build nonetheless.

Hey there! Sorry if it feels I’m spamming, but no one else is sharing their builds. Anyways, this time is a 30MS build, a collabo with Fate Grand Order. To be honest, I haven’t played FGO, only knowing the brand through Stay Night, but I couldn’t resist a girl in armor (they’re so cool!)

To be fair, while the model looks great once finished, and some of the armor parts are great and I can see myself modding them unto other builds, there are some design choices that make this build less than stellar. Some of the joints are weak, the clothes greatly limit leg mobility, and that shield, oh the shield! Amazing to look at, but too heavy for the model. You do need a separate stand for it if you want to pose it as anything else but the basis pose.

All in all, a good build nonetheless.

0

[30MF] Dragonia Lord

preview

Hey there! To complement augus’ Dragonia Knight post, here’s my take on the upgrade kit, the Dragonia Lord. It originally comes in red and gold-ish; I painted it black with white gold, as I already had a different kit with a similar colour scheme and wanted some variety. This was also the first time I experimented with paint layer opacity; I tried to apply the black layer thinly as to let some of the original red undertones to show through, as a way to emulate fiery scales; the result was not exactly as I expected, but I was also not disappointed.

After assembling it and painting it, one of the horns broke. I think it adds some cool flair to it, if I say so myself!

I must say, out of the current 30MF line, the Dragonia Lord is one of my favs. Not only because I adore anything dragon, but because the build is a bit sturdier than the other kits, perhaps because it’s slightly bigger and there’s a bit more plastic on the joints.

Hey there! To complement augus’ Dragonia Knight post, here’s my take on the upgrade kit, the Dragonia Lord. It originally comes in red and gold-ish; I painted it black with white gold, as I already had a different kit with a similar colour scheme and wanted some variety. This was also the first time I experimented with paint layer opacity; I tried to apply the black layer thinly as to let some of the original red undertones to show through, as a way to emulate fiery scales; the result was not exactly as I expected, but I was also not disappointed.

After assembling it and painting it, one of the horns broke. I think it adds some cool flair to it, if I say so myself!

I must say, out of the current 30MF line, the Dragonia Lord is one of my favs. Not only because I adore anything dragon, but because the build is a bit sturdier than the other kits, perhaps because it’s slightly bigger and there’s a bit more plastic on the joints.

0

30MF Dragonia Knight

The 30MF Dragonia Knight in a relaxed, somewhat crouched standing pose. Its left arm is hanging loosely in front of it, and it is holding its double-edged sword above its shoulder
preview

30MF Dragonia Knight

Fantastic kit. The “silhouette”/base body looks good by itself, but once you put on the armor it turns into one of the coolest kits I’ve assembled.

My main complaint with this whole line (so far) is that I have not been able to make the eyes “glow” with silver paint behind the clear plastic.

@gunpla

#30MF #30MM #30minutesmission #mecha #plamo #modelkit #modelkits

30MF Dragonia Knight

Fantastic kit. The “silhouette”/base body looks good by itself, but once you put on the armor it turns into one of the coolest kits I’ve assembled.

My main complaint with this whole line (so far) is that I have not been able to make the eyes “glow” with silver paint behind the clear plastic.

@gunpla

#30MF #30MM #30minutesmission #mecha #plamo #modelkit #modelkits

0

Crossbone Ghost fight scene with Victory

preview

🙌 Wooooo! The kits and bases for this scene from Crossbone Ghost are done! Technically I still need to correct the cut of some ⅛” plex to hold up the manga panel and diffuse the leds in the frame, but I foresee that taking a good bit longer and doesn’t really detract from the gunpla.

🙌 Wooooo! The kits and bases for this scene from Crossbone Ghost are done! Technically I still need to correct the cut of some ⅛” plex to hold up the manga panel and diffuse the leds in the frame, but I foresee that taking a good bit longer and doesn’t really detract from the gunpla.

0

[30MS] Custom Build

preview

Hey there! Sorry if it seems I’m spamming; I just have many builds to share!

This time is a custom build using 30 Minutes Sisters and Missions kits. For the torso, I used Option parts set 7 (evil costume) color A, with arms and legs from 30MM Cielnova. The hair and face, I don’t remember the kit numbers.

The weapons come from the 30MM Armored Core weapon set 04 (the machine gun and the canon thing) and sengoku army customize weapons (the long gun).

For the colours, I had this yellow on black image in mind; I tried to go with a pattern or oil stains design, but I think I still have a long way to go. Need more practice!

Hey there! Sorry if it seems I’m spamming; I just have many builds to share!

This time is a custom build using 30 Minutes Sisters and Missions kits. For the torso, I used Option parts set 7 (evil costume) color A, with arms and legs from 30MM Cielnova. The hair and face, I don’t remember the kit numbers.

The weapons come from the 30MM Armored Core weapon set 04 (the machine gun and the canon thing) and sengoku army customize weapons (the long gun).

For the colours, I had this yellow on black image in mind; I tried to go with a pattern or oil stains design, but I think I still have a long way to go. Need more practice!

0

[BandaiSpirits] Daemon x Machina TS Bahamut

preview

Hey there! New kit, this time from the Daemon x Machina TS collab series, the Bahamut!

The kit is amazing, and I cannot recommend it enough. It was a bit harder to build than the ones in the 30mm series, but nothing too hard. The armor detail is on point, especially for a high-grade level kit (or at least that’s where I’d put it). The mobility is not as great, mostly due to the armor, but it was enough to make a couple of poses.

Hey there! New kit, this time from the Daemon x Machina TS collab series, the Bahamut!

The kit is amazing, and I cannot recommend it enough. It was a bit harder to build than the ones in the 30mm series, but nothing too hard. The armor detail is on point, especially for a high-grade level kit (or at least that’s where I’d put it). The mobility is not as great, mostly due to the armor, but it was enough to make a couple of poses.

0

[30MF] Gladiator

preview

Hey there! Allow me to show you another of my builds, again from 30 Minutes Fantasy. This time is a bit of a custow build: Liber Gladiator armor with the body from Rozan Wizard. My objective was to do a bit of training with the feminization of the models (seeing as how, as of now, all 30MF kits are very much male-code), following the instructions from Narisawa_Ya.

For the colour, I went with a black metallic base with a gold coating for a dark gold effect, and white gold for the accents.

Armor base: Metallic black (Tamiya TS-40) Armor coating: Prost’s Goro ゴールドパール Accent base: Champagne gold (TS-75) Weapon color: Gold (TS-21)

Hey there! Allow me to show you another of my builds, again from 30 Minutes Fantasy. This time is a bit of a custow build: Liber Gladiator armor with the body from Rozan Wizard. My objective was to do a bit of training with the feminization of the models (seeing as how, as of now, all 30MF kits are very much male-code), following the instructions from Narisawa_Ya.

For the colour, I went with a black metallic base with a gold coating for a dark gold effect, and white gold for the accents.

Armor base: Metallic black (Tamiya TS-40) Armor coating: Prost’s Goro ゴールドパール Accent base: Champagne gold (TS-75) Weapon color: Gold (TS-21)

0

(30MF) Are other kits accepted here?

preview

Hey there! Wondering if other non-gundam kits are accepted here. I tried to look for a 30 Minute Missions and their family community, or at least something more generic, but it seems Lemmy needs more love for plastic kits. Anyways, if you all don’t mind, allow me to post a bit of my collection. Since I started building, I’ve always aimed to put some custom painting in each figure. It doesn’t always end up pretty, but it’s always enjoyable!

Here’s a Liber Viking from my favourite lineup of 30 Minute Fantasy.

Hey there! Wondering if other non-gundam kits are accepted here. I tried to look for a 30 Minute Missions and their family community, or at least something more generic, but it seems Lemmy needs more love for plastic kits. Anyways, if you all don’t mind, allow me to post a bit of my collection. Since I started building, I’ve always aimed to put some custom painting in each figure. It doesn’t always end up pretty, but it’s always enjoyable!

Here’s a Liber Viking from my favourite lineup of 30 Minute Fantasy.

0

Finally making progress on the XM-X0!

preview

Finally making tangible progress on this kit! The weird gold I mixed up, and a piece that took a stroll into the aether slowed me down a bit. Luckily, I’ve got some paints I can mix up to recreate my rattle can gold for the shoulders and plamokitbash had a version of the piece I lost (don’t even have to paint it!) Once the external pieces of the joints and the small gold details are painted, I can get it assembled and move to the base and background 🙌

Finally making tangible progress on this kit! The weird gold I mixed up, and a piece that took a stroll into the aether slowed me down a bit. Luckily, I’ve got some paints I can mix up to recreate my rattle can gold for the shoulders and plamokitbash had a version of the piece I lost (don’t even have to paint it!) Once the external pieces of the joints and the small gold details are painted, I can get it assembled and move to the base and background 🙌

0

MG Ver.Ka Zeta Gundam

preview

Only my third kit build. I actually did some research to see what kits people thought were really good quality. Glad I did, because this one was an absolute pleasure to build.

I haven’t put on any decals yet, but I think it already looks pretty fantastic.

Only my third kit build. I actually did some research to see what kits people thought were really good quality. Glad I did, because this one was an absolute pleasure to build.

I haven’t put on any decals yet, but I think it already looks pretty fantastic.

0

HG Heavyarms

preview

I’ve been on a Wing kick and Sandrock is next. Need to clean up the panel lining a bit and give it a top coat but it was a fun build

I’ve been on a Wing kick and Sandrock is next. Need to clean up the panel lining a bit and give it a top coat but it was a fun build

0

HG Gundam Mk. II (Revive)

The HG Gundam Mark 2 Revive A.E.U.G. on a stand against a black background. It is falling backwards with its bazooka pointed toward the viewer's left.
preview

HG Gundam Mk. II (Revive)

This was a fun kit, although I’m glad I went into it knowing it needed some paint. I was surprised at how much I liked the design, since I’m not a big fan of the RX-78-2.

@gunpla

#gunpla #gundammkii #gundam #universalcentury #hguc #HighGrade #plamo #modelkit #mecha

HG Gundam Mk. II (Revive)

This was a fun kit, although I’m glad I went into it knowing it needed some paint. I was surprised at how much I liked the design, since I’m not a big fan of the RX-78-2.

@gunpla

#gunpla #gundammkii #gundam #universalcentury #hguc #HighGrade #plamo #modelkit #mecha

0

[30MM] Cielnova Custom (Space Type)

preview
more pics

Whoof, it’s been a while since I’ve had a new build. Maybe I’ll start posting older builds that I haven’t shared before.

Anyway, I bought this kit off P-Bandai pretty much solely on the basis of that backpack reminding me of the Tallgeese. Visually, at least, since it’s actually a detachable skygrasper/core lander-like thing. I mostly enjoyed the build, although I do have a minor gripe about the rifle. It’s assembled in sections to allow for modularity, but the sections attach together using flat tabs, and as a result the rifle is kinda wobbly and I needed to be super careful about the hand placements to keep the rifle straightened out rather than bending to the side at the joints.

more pics

Whoof, it’s been a while since I’ve had a new build. Maybe I’ll start posting older builds that I haven’t shared before.

Anyway, I bought this kit off P-Bandai pretty much solely on the basis of that backpack reminding me of the Tallgeese. Visually, at least, since it’s actually a detachable skygrasper/core lander-like thing. I mostly enjoyed the build, although I do have a minor gripe about the rifle. It’s assembled in sections to allow for modularity, but the sections attach together using flat tabs, and as a result the rifle is kinda wobbly and I needed to be super careful about the hand placements to keep the rifle straightened out rather than bending to the side at the joints.

0

First time posting, Monument Repair Type, WIP

preview

Hello All,

I wanted to share a few pictures of my WIP Monument Repair Type custom build.

I am nearing the completion and have only the leg armor to finish. Let me know what you think!

Hello All,

I wanted to share a few pictures of my WIP Monument Repair Type custom build.

I am nearing the completion and have only the leg armor to finish. Let me know what you think!

0

HG Gundam Barbatos Lupus Rex

The HG Gundam Barbatos Lupus Rex in a standing pose against a black background. Its right hand is holding its mace, which is only partially visible. Its left is positioned ahead of its face with the yellow claws pointed towars the viewer. Its tail is stabbing toward the viewer.
preview

HG Gundam Barbatos Lupus Rex

This required a decent amount of paint to get it close to color accurate, but I’m happy with the result.

@gunpla

#HighGrade #gunpla #gundam #gundamibo #IronBloodedOrphans #mecha #modelkit #modelkits #plamo

HG Gundam Barbatos Lupus Rex

This required a decent amount of paint to get it close to color accurate, but I’m happy with the result.

@gunpla

#HighGrade #gunpla #gundam #gundamibo #IronBloodedOrphans #mecha #modelkit #modelkits #plamo

0

MG Unicorn Gundam (OVA)

The MG Unicorn Gundam OVA in Destroy mode with bright pink details in a standing pose holding its rifle and shield.
preview

MG Unicorn Gundam (OVA)

This is definitely a kit of highs and lows. The pink plastic almost glows, and the silhouette is intimidating. However, the transformation gimmick causes issues with Unicorn mode and general stability, which is quite unfortunate.

@gunpla

#gunpla #gundam #mecha #gundamuc #GundamUnicorn #plamo #modelkit

MG Unicorn Gundam (OVA)

This is definitely a kit of highs and lows. The pink plastic almost glows, and the silhouette is intimidating. However, the transformation gimmick causes issues with Unicorn mode and general stability, which is quite unfortunate.

@gunpla

#gunpla #gundam #mecha #gundamuc #GundamUnicorn #plamo #modelkit

0

HG Gundam Pharact

The HG Gundam Pharacy on a stand flying toward the viewer's right with its rifle pointed ahead
preview

HG Gundam Pharact

I wanted to build something relatively unique and simple, so I pulled the Pharact. Very similar build to the Zowort (understandably). Definitely looks better on a stand than free-standing.

@gunpla

#highgrade #mecha #gunpla #plamo #modelkits #gwitch #witchfrommercury

HG Gundam Pharact

I wanted to build something relatively unique and simple, so I pulled the Pharact. Very similar build to the Zowort (understandably). Definitely looks better on a stand than free-standing.

@gunpla

#highgrade #mecha #gunpla #plamo #modelkits #gwitch #witchfrommercury

0

Zakupla-kun DX

A (slightly blurry) picture of the "Normal ver." of Zakupla-kun. It is holding the zaku machine gun in its right hand, and a heat hawk in the left. It is on the included stand.
preview

Zakupla-kun DX

This was a neat kit to build. Almost a surreal experience to clip a display runner out of an actual runner. The last image is a scan of the parts list, just to demonstrate how much goes into the display.

@gunpla

#gunpla #modelkits #plamo #gundam #zaku #gunplakun

Zakupla-kun DX

This was a neat kit to build. Almost a surreal experience to clip a display runner out of an actual runner. The last image is a scan of the parts list, just to demonstrate how much goes into the display.

@gunpla

#gunpla #modelkits #plamo #gundam #zaku #gunplakun

0

MG Char's Zaku II 2.0 (with a Sony α7 IV)

The MG Zaku II 2.0 on the Action Base 1 with its bazooka pointed to the viewer's left. Used the FE 28-70mm F3.5-5.6 OSS lens
preview

MG Char’s Zaku II 2.0 (with a Sony α7 IV)

First of all, apologies to ohai for the filesize on this post.

I love the Zaku II. Probably my favorite mobile suit design, besides maybe the Barbatos Lupus. The MG Zaku II 2.0 is a fantastic rendition of the suit, and definitely worth getting.

I borrowed my friend’s Sony α7 IV mirrorless camera and took some (unfortunately not bright enough) pictures in a lightbox.

@gunpla

#gunpla #gundam #universalcentury #mastergrade #modelkits #mecha #plamo

MG Char’s Zaku II 2.0 (with a Sony α7 IV)

First of all, apologies to ohai for the filesize on this post.

I love the Zaku II. Probably my favorite mobile suit design, besides maybe the Barbatos Lupus. The MG Zaku II 2.0 is a fantastic rendition of the suit, and definitely worth getting.

I borrowed my friend’s Sony α7 IV mirrorless camera and took some (unfortunately not bright enough) pictures in a lightbox.

@gunpla

#gunpla #gundam #universalcentury #mastergrade #modelkits #mecha #plamo

0

[30MM] AC6 Generic Balam Melander with Weapon Set 02

30MM Melander in a kneeling pose against a black background
preview

[30MM] AC6 Generic Balam Melander with Weapon Set 02

More (poorly color balanced) images of an Armored Core 6 build. Well, two actually, since the last two images include my generic Orbiter with the Weapon Set 05 I put together for it.

@gunpla

#30minutes_missions #30MM #armoredcorevi #armoredcore #bandaispirits #mecha

[30MM] AC6 Generic Balam Melander with Weapon Set 02

More (poorly color balanced) images of an Armored Core 6 build. Well, two actually, since the last two images include my generic Orbiter with the Weapon Set 05 I put together for it.

@gunpla

#30minutes_missions #30MM #armoredcorevi #armoredcore #bandaispirits #mecha

0

[30MM] Armored Core VI Nachtreiher / V.IV Rusty

The 30MM V4 Rusty lunging toward the viewer with its laser twinblade
preview

[30MM] Armored Core VI Nachtreiher / V.IV Rusty

This is one of my 3 ACs from Bandai, and the only non-generic one I have. Pictures of the others will come soon enough, although I didn’t have the lighting quite right for them, either.

Fun note: right after this, one of its feet broke in 3 places. Some wire and glue has it back mostly right.

@gunpla

#mecha #plamo #armoredcore #armoredcorevi #30mm #30_minutes_missions

[30MM] Armored Core VI Nachtreiher / V.IV Rusty

This is one of my 3 ACs from Bandai, and the only non-generic one I have. Pictures of the others will come soon enough, although I didn’t have the lighting quite right for them, either.

Fun note: right after this, one of its feet broke in 3 places. Some wire and glue has it back mostly right.

@gunpla

#mecha #plamo #armoredcore #armoredcorevi #30mm #30_minutes_missions

0

MG Blitz Gundam

The MG Blitz Gundam launching its Gleipnir weapon at the viewer, with its right hand holding the Trikeros offensive shield
preview

MG Blitz Gundam

Brief story time: my first articulated “model kit” was the G-Frame Blitz Gundam. I was amazed at the simplicity and aesthetic for <10 USD, and it inspired me to get into the hobby.

Late last year I got the MG Blitz Gundam, and it is everything I liked about the G-Frame times 20.

@gunpla

#gunpla #gundam #plamo #mecha #modelkits #gundamseed

MG Blitz Gundam

Brief story time: my first articulated “model kit” was the G-Frame Blitz Gundam. I was amazed at the simplicity and aesthetic for <10 USD, and it inspired me to get into the hobby.

Late last year I got the MG Blitz Gundam, and it is everything I liked about the G-Frame times 20.

@gunpla

#gunpla #gundam #plamo #mecha #modelkits #gundamseed

0

SNAA Nether Emperor

preview

This is probably my most involved project so far. I liked the Nether Emperor ever since it was first announced, but the color scheme did not say “nether” to me, so I changed that. I learned a lot, especially in regards to shading. I applied some orange fluorescent paint as a wash to the inner frame to give it a molten look.

This is probably my most involved project so far. I liked the Nether Emperor ever since it was first announced, but the color scheme did not say “nether” to me, so I changed that. I learned a lot, especially in regards to shading. I applied some orange fluorescent paint as a wash to the inner frame to give it a molten look.

0

[30MS] Spotter

preview

Build this time is another custom 30MS combining the spotter costume and float unit. Once again, the HGAC Leo FWS provides accessories, in this case the long- and short-type beam rifles and the space-type backpack.

Build this time is another custom 30MS combining the spotter costume and float unit. Once again, the HGAC Leo FWS provides accessories, in this case the long- and short-type beam rifles and the space-type backpack.

0

[30MS] Hello Nurse!

preview

Aider Costume + Dash Unit = rollerblading nurse. I tried to emulate, as much as possible, an action pose that professional speed skaters often take during a race. I think it turned out well enough, even if the left hip ended up kinda goofy looking, since there’s no skirt to hide the joint. Also, the bazooka is originally from the HGAC Leo FWS, but I guess it’s now a potion launcher or something, I dunno.

Aider Costume + Dash Unit = rollerblading nurse. I tried to emulate, as much as possible, an action pose that professional speed skaters often take during a race. I think it turned out well enough, even if the left hip ended up kinda goofy looking, since there’s no skirt to hide the joint. Also, the bazooka is originally from the HGAC Leo FWS, but I guess it’s now a potion launcher or something, I dunno.

0

HG Unicorn Gundam 02 Banshee Norn (Destroy Mode)

The HG Banshee Norn Destroy Mode in a leaping pose on a flight stand. Its revolver rifle is firing, and it is blocking potential attacks from its left.
preview

HG Unicorn Gundam 02 Banshee Norn (Destroy Mode)

(that’s a mouthfull)

I went into this kit expecting extra work, but the result was worth it. It even came with an extra shield (from the Unicorn mode?). I do wish it came with some basic beams for the sabers and tonfas, though.

@gunpla

#gunpla #gundam #modelkits #plamo #mecha #HighGrade #GundamUnicorn

HG Unicorn Gundam 02 Banshee Norn (Destroy Mode)

(that’s a mouthfull)

I went into this kit expecting extra work, but the result was worth it. It even came with an extra shield (from the Unicorn mode?). I do wish it came with some basic beams for the sabers and tonfas, though.

@gunpla

#gunpla #gundam #modelkits #plamo #mecha #HighGrade #GundamUnicorn

0

[30MS] Tactical Cyberpunk Action!

preview

Or perhaps Rydira is streetpunk? Nah, I’m gonna say that the sci-fi looking weapon (actually the mega beam cannon from the HGAC Leo Full Weapon Set) makes it cyberpunk. Helmet on, though, because you gotta protect your noggin.

Or perhaps Rydira is streetpunk? Nah, I’m gonna say that the sci-fi looking weapon (actually the mega beam cannon from the HGAC Leo Full Weapon Set) makes it cyberpunk. Helmet on, though, because you gotta protect your noggin.

0

EG Build Strike Exceed Galaxy

The Entry Grade Exceed Galaxy on a 3D printed flight stand launching its attached aircraft at the viewer
preview

EG Build Strike Exceed Galaxy

This was a surprisingly fun build, especially since I have never done a Strike Gundam before.

@gunpla

#gunpla #gundam #plamo #mecha #EntryGrade #modelkits #gundambuildmetaverse

EG Build Strike Exceed Galaxy

This was a surprisingly fun build, especially since I have never done a Strike Gundam before.

@gunpla

#gunpla #gundam #plamo #mecha #EntryGrade #modelkits #gundambuildmetaverse

0

MGSD Gundam Aerial

The MGSD Gundam Aerial on a flight stand lunging toward the viewer. Its right hand is holding an activated beam saber in a slashing pose, and its left is holding its shield in front of its torso. Its eyes are clearly visible over the top of the shield.
preview

MGSD Gundam Aerial

Finally figured something out for pictures, just in time to finish another Aerial.

This kit is super fun. The strange proportions highlight a lot of what I like about the original design, and the eyes are absolutely wild. The permet could stand out more, but I appreciate that I can swap between red and blue.

@gunpla

#gunpla #gwitch #gundam #modelkits #plamo #mecha #mgsd #SuperDeformed

MGSD Gundam Aerial

Finally figured something out for pictures, just in time to finish another Aerial.

This kit is super fun. The strange proportions highlight a lot of what I like about the original design, and the eyes are absolutely wild. The permet could stand out more, but I appreciate that I can swap between red and blue.

@gunpla

#gunpla #gwitch #gundam #modelkits #plamo #mecha #mgsd #SuperDeformed

0

This is not a Gundam!

preview

Aerial is not a Gundam! There was an inquest and everything!

First build of the new year is MGSD Aerial, with the WfM Action Base and WfM weapon display. Sadly, the weapon display does not actually come with enough arms and adapters for all of the Aerial’s 11(!) GUND bits, so I improvised using some of the unused arms and adapters from my other Action Base 5s and the God Gundam expansion set. I also didn’t use the weapon display arm that actually came with the WfM Action Base, because it’s purple and that doesn’t go with the clear arms of the WfM weapon display.

Aerial is not a Gundam! There was an inquest and everything!

First build of the new year is MGSD Aerial, with the WfM Action Base and WfM weapon display. Sadly, the weapon display does not actually come with enough arms and adapters for all of the Aerial’s 11(!) GUND bits, so I improvised using some of the unused arms and adapters from my other Action Base 5s and the God Gundam expansion set. I also didn’t use the weapon display arm that actually came with the WfM Action Base, because it’s purple and that doesn’t go with the clear arms of the WfM weapon display.

0

[30MM] Spinatia Saint Valkyrie Type

preview

P-Bandai variant of the Spinatia, distinguished by a new color palette and a set of wings. Interestingly, the wings attach to the waist and not the back. Also, the “default” configuration for this kit, judging by the box and manual, appears to be as a swordswoman, but I like the visual of using the staff to fire off a spell circle more.

Incidentally, I was quite surprised by how simple the torso was compared to 30MS kits. I guess when you’re not constrained by the need to try to replicate an actual human torso you can get away with simple ball joints.

P-Bandai variant of the Spinatia, distinguished by a new color palette and a set of wings. Interestingly, the wings attach to the waist and not the back. Also, the “default” configuration for this kit, judging by the box and manual, appears to be as a swordswoman, but I like the visual of using the staff to fire off a spell circle more.

Incidentally, I was quite surprised by how simple the torso was compared to 30MS kits. I guess when you’re not constrained by the need to try to replicate an actual human torso you can get away with simple ball joints.

0

MG Freedom 2.0 (Cross Contrast)

preview

This is a special edition of MG Freedom 2.0 with Cross Contrast and clear colors. It also came with unique water slide decals and a clear Action Base 1 instead of the crappy stand that other MG Seed kits get. I panel lined with silver enamel paint and sprayed matte topcoat to give the clear parts a frosty look.

This is a special edition of MG Freedom 2.0 with Cross Contrast and clear colors. It also came with unique water slide decals and a clear Action Base 1 instead of the crappy stand that other MG Seed kits get. I panel lined with silver enamel paint and sprayed matte topcoat to give the clear parts a frosty look.

0

[30MF] Liber Archer

preview

Unlike some other model kits, this one has an English accent!

Anyway, my first foray into 30MF. The line has some sort of lore about the world getting wrecked by meteors and the human survivors creating robots to reclaim the world, but honestly no one really cares about that. The core of this kit is the gray silhouette body, over which you stick all the armor pieces. The archer line doesn’t appear to have any upgrade kits, although you can swap out the armor with any other humanoid 30MF kit.

The bowstring is a strip of PET, which was an unexpected choice (I was half-expecting wire or something), but it makes sense in practice, since the string needs to keep tension to look good, and the PET works in that regard. Also, the quiver is technically supposed to attach to the back, but as someone who actually dabbled with archery in the past I always found hip quivers to be way better, so onto the side skirt it goes.

Unlike some other model kits, this one has an English accent!

Anyway, my first foray into 30MF. The line has some sort of lore about the world getting wrecked by meteors and the human survivors creating robots to reclaim the world, but honestly no one really cares about that. The core of this kit is the gray silhouette body, over which you stick all the armor pieces. The archer line doesn’t appear to have any upgrade kits, although you can swap out the armor with any other humanoid 30MF kit.

The bowstring is a strip of PET, which was an unexpected choice (I was half-expecting wire or something), but it makes sense in practice, since the string needs to keep tension to look good, and the PET works in that regard. Also, the quiver is technically supposed to attach to the back, but as someone who actually dabbled with archery in the past I always found hip quivers to be way better, so onto the side skirt it goes.

0

Mini Tachikoma paint job

preview

I wasn’t the most happy with my Jigabachi paint job. I airbrushed but kept getting a rough texture. I was using 15-18psi with pre thinned lacquer paints but especially on larger pieces something wasn’t working right. Took a break then figured that the mini tachikoma that came with that same model would be perfect for some trial and error.

This time I used a can of primer instead of the Mr surfacer bottle. I used all the same paints but decided to build up the color more gradually. This is where I had the problem I think. I read that with gloss and metallics you want to put on a nice wet coat but I know that orange peel/ rough texture can come from putting the paint on too thick/fast.

I started with a super fine misting of the color before setting it down and getting to other pieces. Once done, say 5-10mins I’d go back to the first piece with about the same type of coating. 5 or 6 passes latter and the color was basically where I wanted. I then did a wetter coat, wet enough that I could see a glossy sheen, and that was my last coat for the paint. Let dry for 24hrs and hit it with a gloss, let dry another 24, then did the detail paints by hand. Red enamel for the lights, black for the “eyes” and other dark marks, and silver for the bare metal.

I’m super happy with the result. I think I found my airbrush problem and I did decently well with the hand painting. I have two more of these mini Tachikoma so I think I’ll try to get the colors for the others from the episode where the three Tachikoma break out to save Batou. Yellow/black construction type and I think the other was like a rnd style grey. Or maybe a red one like the Arise model

I wasn’t the most happy with my Jigabachi paint job. I airbrushed but kept getting a rough texture. I was using 15-18psi with pre thinned lacquer paints but especially on larger pieces something wasn’t working right. Took a break then figured that the mini tachikoma that came with that same model would be perfect for some trial and error.

This time I used a can of primer instead of the Mr surfacer bottle. I used all the same paints but decided to build up the color more gradually. This is where I had the problem I think. I read that with gloss and metallics you want to put on a nice wet coat but I know that orange peel/ rough texture can come from putting the paint on too thick/fast.

I started with a super fine misting of the color before setting it down and getting to other pieces. Once done, say 5-10mins I’d go back to the first piece with about the same type of coating. 5 or 6 passes latter and the color was basically where I wanted. I then did a wetter coat, wet enough that I could see a glossy sheen, and that was my last coat for the paint. Let dry for 24hrs and hit it with a gloss, let dry another 24, then did the detail paints by hand. Red enamel for the lights, black for the “eyes” and other dark marks, and silver for the bare metal.

I’m super happy with the result. I think I found my airbrush problem and I did decently well with the hand painting. I have two more of these mini Tachikoma so I think I’ll try to get the colors for the others from the episode where the three Tachikoma break out to save Batou. Yellow/black construction type and I think the other was like a rnd style grey. Or maybe a red one like the Arise model

0

Perfect Grades are awesome

preview

Just finished installing the under frame. I’m so reluctant to add on the armor and have been taking weeks having the figure sit in the back of the kitchen table while admiring the details when eating.

Just finished installing the under frame. I’m so reluctant to add on the armor and have been taking weeks having the figure sit in the back of the kitchen table while admiring the details when eating.

0

HGRfV RX-78(G)E Gundam EX (Preliminary)

The HGRfV Gundam EX stepping toward the camera in a pose similar to the box art
preview

HGRfV RX-78(G)E Gundam EX (Preliminary)

Still have to finish up the water slide decals I bought for it, but I’m already pretty happy with the result.

@gunpla

#gunpla #gundam #highgrade #hgrfv #modelkits #plamo #mecha #gundamrequiemforvengeance

HGRfV RX-78(G)E Gundam EX (Preliminary)

Still have to finish up the water slide decals I bought for it, but I’m already pretty happy with the result.

@gunpla

#gunpla #gundam #highgrade #hgrfv #modelkits #plamo #mecha #gundamrequiemforvengeance

0

White Dragon Knight Galahad

preview

Now that I’m done with model shows for a while, I’ve shifted gears and decided to work on some girlpla for a while. This one is mostly a straight build, with a bit of panel lining, some decals, and matte topcoat. Overall, it’s a good build, and great value for what comes in the box, including 2 full models and lots of accessories, not to mention pre-painted and detailed pieces.

Now that I’m done with model shows for a while, I’ve shifted gears and decided to work on some girlpla for a while. This one is mostly a straight build, with a bit of panel lining, some decals, and matte topcoat. Overall, it’s a good build, and great value for what comes in the box, including 2 full models and lots of accessories, not to mention pre-painted and detailed pieces.