#dull_mens_club

posts tagged #dull_mens_club

0

Do you rake and bag or mow/ mulch?

preview

I used the rider to blow most of the leaves into a narrower line. Then used my walk behind to mulch them up. The walk behind is a Husqvarna that I ruined hitting a large piece of metal. So I put a harbor freight engine on it. My stepson helped, had to add a throttle cable. It’s a all wheel drive deck, and I only had a season and a 1/2 use out of it. Couldn’t bring myself to get rid of it.

I used the rider to blow most of the leaves into a narrower line. Then used my walk behind to mulch them up. The walk behind is a Husqvarna that I ruined hitting a large piece of metal. So I put a harbor freight engine on it. My stepson helped, had to add a throttle cable. It’s a all wheel drive deck, and I only had a season and a 1/2 use out of it. Couldn’t bring myself to get rid of it.

0

Made my laptop brightness work again

preview

My laptop is an off brand that I got years ago because it had an Ethernet jack and an Nvidia 1070 and no major brand bloatware. Moved it from Windows to Bazzite Linux and the brightness controls stopped working, stuck at 100% regardless of what any setting reported. Tried all the kernel options and stuff but it turned out that the brightness controls didn’t work because I had the BIOS set to only use the Nvidia card instead of hybrid. Brightness works now that the desktop is rendered by the integrated gpu. Finally, using my laptop isn’t like looking into the sun anymore.

My laptop is an off brand that I got years ago because it had an Ethernet jack and an Nvidia 1070 and no major brand bloatware. Moved it from Windows to Bazzite Linux and the brightness controls stopped working, stuck at 100% regardless of what any setting reported. Tried all the kernel options and stuff but it turned out that the brightness controls didn’t work because I had the BIOS set to only use the Nvidia card instead of hybrid. Brightness works now that the desktop is rendered by the integrated gpu. Finally, using my laptop isn’t like looking into the sun anymore.

0

I cleaned the fridge today

preview

Did not have any specific plans today, so I looked in the fridge for a snack. That’s when I noticed that there was water under one of the feet.

So I took everything out, cleaned the fridge and drain (which was clogged), and then moved the fridge to clean behind it.

Lo and behold, mice had a little nest. Found a little hole in the wall, which I closed up. Cleaned it all up, and hours later, I am done.

Did not have any specific plans today, so I looked in the fridge for a snack. That’s when I noticed that there was water under one of the feet.

So I took everything out, cleaned the fridge and drain (which was clogged), and then moved the fridge to clean behind it.

Lo and behold, mice had a little nest. Found a little hole in the wall, which I closed up. Cleaned it all up, and hours later, I am done.

0

Just a massive thank you!

preview

To whoever created this community. I feel like men need a space like this to talk about just men things/stuff without being judged. This is a great place to be yourself, and I genuinely appreciate it.

I’ve quit Reddit for good over a year ago and then found out about the fediverse, and then found out about this community recently through a random post on the “All” section. It piqued my interest, and now I’m a member who checks it out basically daily. It’s something I have always thought should exist. Possibly did on Reddit, but I never thought to check. Probably for the best, because Reddit sucked as a platform.

So, thank you and keep on keeping on, guys. You’re doing great.

To whoever created this community. I feel like men need a space like this to talk about just men things/stuff without being judged. This is a great place to be yourself, and I genuinely appreciate it.

I’ve quit Reddit for good over a year ago and then found out about the fediverse, and then found out about this community recently through a random post on the “All” section. It piqued my interest, and now I’m a member who checks it out basically daily. It’s something I have always thought should exist. Possibly did on Reddit, but I never thought to check. Probably for the best, because Reddit sucked as a platform.

So, thank you and keep on keeping on, guys. You’re doing great.

0

I purchased new notebooks

preview

They’re are lined, A5, hardcover notebooks. Kinda like Moleskine but unbranded, made in China.

I recently purchased two of them, in some nearby discount shop (near Paris, France). At 1,99€ each this seemed like an excellent bargain and after using one for a couple weeks or so, I went back to the store this very afternoon and purchased the few that were left.

Exciting as it already is, I need to point out that this purchase saved me quite a few bucks compared to regular branded-notebooks, as I now own 8 notebooks for (less than?) the price a single branded one… A brand whose notebooks are also made in China, btw.

If that was not exciting enough already: being there for the second time in a few weeks, I took the opportunity to buy a few extra packs of “10 Cristal Bic”, at 1,49€ per pack (0,15c/pen).

Sometimes, it feels like my life is way too exciting.

They’re are lined, A5, hardcover notebooks. Kinda like Moleskine but unbranded, made in China.

I recently purchased two of them, in some nearby discount shop (near Paris, France). At 1,99€ each this seemed like an excellent bargain and after using one for a couple weeks or so, I went back to the store this very afternoon and purchased the few that were left.

Exciting as it already is, I need to point out that this purchase saved me quite a few bucks compared to regular branded-notebooks, as I now own 8 notebooks for (less than?) the price a single branded one… A brand whose notebooks are also made in China, btw.

If that was not exciting enough already: being there for the second time in a few weeks, I took the opportunity to buy a few extra packs of “10 Cristal Bic”, at 1,49€ per pack (0,15c/pen).

Sometimes, it feels like my life is way too exciting.

0

I cleared the first snow of the winter off the driveway and the footpaths

Pixelfed ExtremeDullard (@ExtremeDullard@pixelfed.sdf.org) pixelfed.sdf.org
preview

Not too much snow, but more of it is on the way. And since I do it by hand for the exercise, I absolutely need to clear it as soon as possible, otherwise it quickly becomes overwhelming.

Also, I strategically dumped the snow in the backyard, to start building a cross-country ski track connecting the public tracks on the lake (which will be carved into the snow when the ice is thick enough to drive a quad on) straight to my garage at the front, so I never have to walk the skis back to the garage when I’m back from a trek. More on that later, when the lake is walkable 🙂

Not too much snow, but more of it is on the way. And since I do it by hand for the exercise, I absolutely need to clear it as soon as possible, otherwise it quickly becomes overwhelming.

Also, I strategically dumped the snow in the backyard, to start building a cross-country ski track connecting the public tracks on the lake (which will be carved into the snow when the ice is thick enough to drive a quad on) straight to my garage at the front, so I never have to walk the skis back to the garage when I’m back from a trek. More on that later, when the lake is walkable 🙂

0

[update] cleaning up some old cast iron

preview

I had enough time to properly clean up two of the three cast iron skillets. I was able to identify that the 8 inch skillet was a wagner ware skillet. When I was seasoning the bottom of the pan a tiny little W and some other characters of the logo started to appear.

As for the griddle it cleaned up alright however the logo is practically rusted off and I can’t really identify it. There’s a lot of pitting rust on the cooking surface and I have been having trouble getting it take seasoning, I think I might have polished it to much that there is no ridges for it to stick to. The only areas that seem to be taking the seasoning are the rust pits. I will keep trying.

I suspect the logo was here

Size or model number?

Bottom profile of the griddle

Pits on the cooking surface.

As for the 8 inch skillet it cooks good. I seasoned it 3 times and it’s doing just fine. Here’s a photo of the logo coming through.

Oh and for the lead testing they all tested negative. I will update this post when I get the other one in good working order.

I had enough time to properly clean up two of the three cast iron skillets. I was able to identify that the 8 inch skillet was a wagner ware skillet. When I was seasoning the bottom of the pan a tiny little W and some other characters of the logo started to appear.

As for the griddle it cleaned up alright however the logo is practically rusted off and I can’t really identify it. There’s a lot of pitting rust on the cooking surface and I have been having trouble getting it take seasoning, I think I might have polished it to much that there is no ridges for it to stick to. The only areas that seem to be taking the seasoning are the rust pits. I will keep trying.

I suspect the logo was here

Size or model number?

Bottom profile of the griddle

Pits on the cooking surface.

As for the 8 inch skillet it cooks good. I seasoned it 3 times and it’s doing just fine. Here’s a photo of the logo coming through.

Oh and for the lead testing they all tested negative. I will update this post when I get the other one in good working order.

0

A moment of silence

preview

Broke my Leatherman today.

I won a raffle in 2008 I think.

The first prize was a gift card which I used to buy the most expensive leatherman that was available in the store at the time.

I have used it so much and still somehow taken way too good care of it. Never abused the blades. I bet the tool I have used the most have been the pliers and the screwdriver.

The leather holster that I used occasionally looks still almost like new.

Cutting hot dog buns for kids when out and about, fixing my bike…

F for respect 🫡

Broke my Leatherman today.

I won a raffle in 2008 I think.

The first prize was a gift card which I used to buy the most expensive leatherman that was available in the store at the time.

I have used it so much and still somehow taken way too good care of it. Never abused the blades. I bet the tool I have used the most have been the pliers and the screwdriver.

The leather holster that I used occasionally looks still almost like new.

Cutting hot dog buns for kids when out and about, fixing my bike…

F for respect 🫡

0

Can someone less dull tell me what the heck just fell aff my microwáve wall?

preview

The internet doesn’t help.

Wtf is that?

It feels plasticky and hard. But I don’t think it’s happy to see me since it’s broken in half and I probably did it when cleaning it.

If you help me figure out what it is, I will clean my microweave in return.

Edit: It’s a Mica cover. TIL.

…wordpress.com/…/microwave-waveguide-cover/

Tx to @TabbsTheBat@pawb.social

The internet doesn’t help.

Wtf is that?

It feels plasticky and hard. But I don’t think it’s happy to see me since it’s broken in half and I probably did it when cleaning it.

If you help me figure out what it is, I will clean my microweave in return.

Edit: It’s a Mica cover. TIL.

…wordpress.com/…/microwave-waveguide-cover/

Tx to @TabbsTheBat@pawb.social

0

I spent some time using a seam ripper on a table-skirt to save the fabric

preview

Please don’t get too excited by the golden threading on the ribbon! I tried to keep it as dull as possible, by folding in the shiny side of the synthetic silk.

This is mostly money saving and recycling in action at the same time. I needed some tulle fabric, and I was able to get a pink table-skirt for basically nothing.

I spent some time on removing the seams. The most challenging part was the two layers of tulle sewn together. I nicked the material in one or two places, but after spending some extra time on it, I finished the task successfully.
So now, I am able to proceed with a project that might be a tad too exciting for this community.

Please don’t get too excited by the golden threading on the ribbon! I tried to keep it as dull as possible, by folding in the shiny side of the synthetic silk.

This is mostly money saving and recycling in action at the same time. I needed some tulle fabric, and I was able to get a pink table-skirt for basically nothing.

I spent some time on removing the seams. The most challenging part was the two layers of tulle sewn together. I nicked the material in one or two places, but after spending some extra time on it, I finished the task successfully.
So now, I am able to proceed with a project that might be a tad too exciting for this community.

0

Reinforced some wobbly legs on the master bed

preview

Had the bed for a long time now, always held up fine. Then my wife bought a new robot vacuum. Apparently its sensitivity sucks because the bastard took out 3 of four legs running down the middle of our bed.

The legs were initially held in place by a single bolt into a metal receptacle bored into thetop of the leg. Seems like the wood splintered once the vacuum kept hitting them full force.

I decided to brace them all with extra L-bend pieces from IKEA furniture (finally a use for the junk drawer!). Biggest problem was actually installing them and attaching the reinforced arms to the bottom of the bed. My kiddo suggested using a car jack to lift and hold the big. It was just crazy enough to work.

Half an hour on my back and doing my best worm impressions in and out from under the bed and done. The jack was perfect and didn’t damage the bed (or let it fall and crush me). All in all about an hour and a half’s work.

If that vacuum takes them out again I’m entering it into Battle Bots.

Had the bed for a long time now, always held up fine. Then my wife bought a new robot vacuum. Apparently its sensitivity sucks because the bastard took out 3 of four legs running down the middle of our bed.

The legs were initially held in place by a single bolt into a metal receptacle bored into thetop of the leg. Seems like the wood splintered once the vacuum kept hitting them full force.

I decided to brace them all with extra L-bend pieces from IKEA furniture (finally a use for the junk drawer!). Biggest problem was actually installing them and attaching the reinforced arms to the bottom of the bed. My kiddo suggested using a car jack to lift and hold the big. It was just crazy enough to work.

Half an hour on my back and doing my best worm impressions in and out from under the bed and done. The jack was perfect and didn’t damage the bed (or let it fall and crush me). All in all about an hour and a half’s work.

If that vacuum takes them out again I’m entering it into Battle Bots.

0

I used some planks from the rotten fence I just rebuilt to replace some of the rotten rotten deck

preview

It’s far from perfect, but at least it’s not a rotted hazard with screws sticking out for the dog to catch her paw on while yeeting herself off the edge.

It’s far from perfect, but at least it’s not a rotted hazard with screws sticking out for the dog to catch her paw on while yeeting herself off the edge.

0

Replaced the showerhead

preview

Old showerhead always came out with little pressure and unevenly. Cleaning didn’t help much so I looked for a new one. I found a seller that manufactured locally and specialized in showerheads. Much better than the attractive plastic junk from the box stores.

It was an easy change and it makes a big difference.

Old showerhead always came out with little pressure and unevenly. Cleaning didn’t help much so I looked for a new one. I found a seller that manufactured locally and specialized in showerheads. Much better than the attractive plastic junk from the box stores.

It was an easy change and it makes a big difference.

0

Hung one of my late grandmothers custom tufted rugs as a tapestry

preview

My grandmother passed due to ALS in 2012. She loved making these rugs that she bought as kits. This one’s been in a bag under a bed for years, almost forgotten about.

Time to see the light once more.

I miss you grandma. Rest In Peace, knowing you were loved by many.

My grandmother passed due to ALS in 2012. She loved making these rugs that she bought as kits. This one’s been in a bag under a bed for years, almost forgotten about.

Time to see the light once more.

I miss you grandma. Rest In Peace, knowing you were loved by many.

0

I recycle silica desiccant bead packs. That boring enough?

preview

Cut 'em open and pour them in a jar with a tight seal. When you need a pack, microwave hell out of some and rubber band them into a piece of coffee filter.

The colored beads indicate how water saturated they are. When they’re nuked and dried out, they change color. YMMV as some manufacturers use different colors or none at all. Whatever. Nuke 'em and reuse.

It’s an exciting hobby.

Cut 'em open and pour them in a jar with a tight seal. When you need a pack, microwave hell out of some and rubber band them into a piece of coffee filter.

The colored beads indicate how water saturated they are. When they’re nuked and dried out, they change color. YMMV as some manufacturers use different colors or none at all. Whatever. Nuke 'em and reuse.

It’s an exciting hobby.

0

I shaved my face with a safety razor for the first time

preview

Bought a Merkur 33C, a synthetic Parker brush, and a mühle soap bar thar I received today.

Not as close a shave as I’m used to, but my skin feels a lot less irritated than it used to after a shave. Cut myself twice, on my upper lip and on the underside of my chin.

Bought a Merkur 33C, a synthetic Parker brush, and a mühle soap bar thar I received today.

Not as close a shave as I’m used to, but my skin feels a lot less irritated than it used to after a shave. Cut myself twice, on my upper lip and on the underside of my chin.

0

I sorted out my rock storage

preview

As everyone knows, it’s that time of the year again that we must prep our rock storages for winter.

I emptied the pallet entirely, cleaned out the leaves and reinforced the bottom a bit. I added some treated lumber blocks under it to lift it off the ground and I tensioned a threaded rod to span through the box to prevent the sides from bulging out. Then I added a permanent tarp to prevent leaves from getting in anymore and stop the pallet from rotting further. It’s also easy to roll to the side when I want to look at my collection. The buckets contain all the smaller stones I have.

As everyone knows, it’s that time of the year again that we must prep our rock storages for winter.

I emptied the pallet entirely, cleaned out the leaves and reinforced the bottom a bit. I added some treated lumber blocks under it to lift it off the ground and I tensioned a threaded rod to span through the box to prevent the sides from bulging out. Then I added a permanent tarp to prevent leaves from getting in anymore and stop the pallet from rotting further. It’s also easy to roll to the side when I want to look at my collection. The buckets contain all the smaller stones I have.