#energy

posts tagged #energy

0

Electricity basics - Power

preview

We have come to understand - with the help of earlier posts - that voltage drives current and that this current can do useful work for us. The amount of work that voltage and current can do is expressed as “power”. The unit of power is watt/W, but when doing calculations “P” is used, taken from the first letter in the word “power”. If on an electric appliance you find the markings “230V, 40W”, it is to be understood that the appliance does useful work for us at the power of 40 watts if it is supplied the voltage 230 volts. If one does not supply the appliance with the prescribed voltage, it will not do useful work for us at the desired power.

Power is a product of voltage and current and can thus be calculated by voltage times current or V * I. The formulaic circle below summarizes both Ohm’s Law - as presented in an earlier post - and how to calculate power:

MYEiTlGtTSDlwhy.png
Source: https://ashlandacademicscience.miraheze.org/w/index.php?curid=209 (2026-09-04)

There is a great variety of electric appliances, for instance lightbulbs, heaters and motors, that do different kinds of useful work for us, for instance creating light, heat and motion.

Electric appliances:
gs1PKJux8DWlbet.jpg
Source: https://www.dreamstime.com/stock-illustration-home-electric-appliance-illustration-icon-set-hand-drawn-sketch-image92394788 (2026-09-04)

In these cases, power is reaped in desirable ways. However, power can also be wasted in undesirable ways! Before current reaches the intended load - the lightbulb, the heater or the motor - it needs to be transported to the load through the conductor(s). Regardless of how efficient a conductor we use, there will always be some resistance, as explained earlier, which in turn will make the voltage and the current to be translated into heat, which is seldom useful: there is a loss of power. The same amount of current will reach the load, but the voltage is diminished through the loss of power. This drop in voltage is referred to as a “voltage drop”.

The way to express how much energy is “used” during a certain period of time is given in “watt seconds/Ws” or “joules”. However, it is more common and useful to express it in “kilowatt hours/kWh”. For instance, a boiler that has a power output of 1000 watts and is used for 30 minutes will have used 1000 * 0,5 or 500 watt hours or 0,5 kilowatt hours.

To be continued: Meanwhile:

  1. This one was really hard to translate in my head. For instance, in Swedish the book litterally says “power is developed” instead of “power is generated”. Is it confusing to say this in English? Similarly, is “loss of power” or “power loss” the correct term to express how power is lost during transport? Also, the watts and voltages that are written on electric appliences are, in Swedish, called “marked power/marked voltage”. Are there equivalents in English?
  2. Is there any intuitive ways to visualize or imagine why current remains the same when a voltage drop occurs? If I understand correctly, current is expressed in ampere, which is a fixed amount of electrons passing through any one point in a circuit in one second. This current is driven by voltage. If resistance is constant, current increases when voltage is increased (I know nothing of the ratios). Wouldn’t a voltage drop mean that less electrons are pushed through that one point in the circuit in one second?

We have come to understand - with the help of earlier posts - that voltage drives current and that this current can do useful work for us. The amount of work that voltage and current can do is expressed as “power”. The unit of power is watt/W, but when doing calculations “P” is used, taken from the first letter in the word “power”. If on an electric appliance you find the markings “230V, 40W”, it is to be understood that the appliance does useful work for us at the power of 40 watts if it is supplied the voltage 230 volts. If one does not supply the appliance with the prescribed voltage, it will not do useful work for us at the desired power.

Power is a product of voltage and current and can thus be calculated by voltage times current or V * I. The formulaic circle below summarizes both Ohm’s Law - as presented in an earlier post - and how to calculate power:

MYEiTlGtTSDlwhy.png
Source: https://ashlandacademicscience.miraheze.org/w/index.php?curid=209 (2026-09-04)

There is a great variety of electric appliances, for instance lightbulbs, heaters and motors, that do different kinds of useful work for us, for instance creating light, heat and motion.

Electric appliances:
gs1PKJux8DWlbet.jpg
Source: https://www.dreamstime.com/stock-illustration-home-electric-appliance-illustration-icon-set-hand-drawn-sketch-image92394788 (2026-09-04)

In these cases, power is reaped in desirable ways. However, power can also be wasted in undesirable ways! Before current reaches the intended load - the lightbulb, the heater or the motor - it needs to be transported to the load through the conductor(s). Regardless of how efficient a conductor we use, there will always be some resistance, as explained earlier, which in turn will make the voltage and the current to be translated into heat, which is seldom useful: there is a loss of power. The same amount of current will reach the load, but the voltage is diminished through the loss of power. This drop in voltage is referred to as a “voltage drop”.

The way to express how much energy is “used” during a certain period of time is given in “watt seconds/Ws” or “joules”. However, it is more common and useful to express it in “kilowatt hours/kWh”. For instance, a boiler that has a power output of 1000 watts and is used for 30 minutes will have used 1000 * 0,5 or 500 watt hours or 0,5 kilowatt hours.

To be continued: Meanwhile:

  1. This one was really hard to translate in my head. For instance, in Swedish the book litterally says “power is developed” instead of “power is generated”. Is it confusing to say this in English? Similarly, is “loss of power” or “power loss” the correct term to express how power is lost during transport? Also, the watts and voltages that are written on electric appliences are, in Swedish, called “marked power/marked voltage”. Are there equivalents in English?
  2. Is there any intuitive ways to visualize or imagine why current remains the same when a voltage drop occurs? If I understand correctly, current is expressed in ampere, which is a fixed amount of electrons passing through any one point in a circuit in one second. This current is driven by voltage. If resistance is constant, current increases when voltage is increased (I know nothing of the ratios). Wouldn’t a voltage drop mean that less electrons are pushed through that one point in the circuit in one second?