13 comments

log in to comment.

  • @JoMiran@lemmy.ml · 6 Oct 2026

    PSA: If you are an indoor swing enjoyer, you might be tempted to use brackets like these to hang your swing.

    This mount type is a bad time waiting to happen, especially if you are a bit heavy and…enthusiastic.

    Instead, I highly recommend the following type of mount, especially if you take it a step further and add a thick plate of metal between the nut and the wood in order to spread tge strain and reinforce the mount point.

    PS: Drill your holes from the top (attic) down.

    • @infinitesunrise@slrpnk.net · 6 Oct 2026

      Do you drill from the top down because the emerging bit causes the wood to split slightly, and that avoids the small splits from having to bare weight?

      • @JoMiran@lemmy.ml · 6 Oct 2026

        You definitely want to use the correct bit, and a drill with a level bubble built in. I also recommend the mount to be relatively close to a load bearing wall, and or “sister” the joist.

  • @NOT_RICK@lemmy.world · 6 Oct 2026

    BBL Snorlax isn’t real, he can’t hurt you, they said!

  • @AtomicHotSauce@piefed.social · 6 Oct 2026

    Trunk: junk

  • @samus12345@sh.itjust.works · 6 Oct 2026

  • @RizzRustbolt@lemmy.world · 6 Oct 2026

    Of course he got a dump truck.

  • @Edges@lemmy.zip · 6 Oct 2026

    Just walk up and put your face in it

  • @fyzzlefry@retrolemmy.com · 6 Oct 2026

  • @Lushed_Lungfish@lemmy.ca · 6 Oct 2026

    Ah Snorlax, my favorite Pokemon.

  • @boobookittyfrick@lemmy.zip · 12 Oct 2026