0

The Joy of Dismembering Necks With A King-S Chef

A handmade kitchen knife with walnut handle, resting on a baking sheet covered in duck juices and spices.
preview

Free-range duck necks are very strong, ropy and flexible, with tiny vertebrae that are impossible to break open with a cleaver. They are much stronger and more muscled than chicken necks, because my Muscovys free range for years before they’re harvested. They are not overfed, fragile little commercial broilers designed to disintegrate at 100 days. Their necks and beaks are their weapons when they fight and they love to fight. You need a knife that can slip in between duck vertebrae and separate the muscle-bound bones, leading to a clean separation. The King-S Chef is that knife. For the first time, I was able to cleanly cut one off (for stock-making collagen, not for eating) without much effort, unlike many previous episodes of scrambling and cursing as a slippery, marinaded duck carcass tries to shoot off the cutting board towards me as I apply force . I didn’t have to apply any muscle, which saved fatigue and let me get a duck in the oven that much faster. There’s not a single bit of meretricious ornamentation on it to catch food debris or juices. I like this knife so much, I just bought it a little Guy Fawkes Day present- a Work Sharp Benchstone, a grown-up-man-dude knife sharpener. [RIP Guy Fawkes, you were a real one.]

Free-range duck necks are very strong, ropy and flexible, with tiny vertebrae that are impossible to break open with a cleaver. They are much stronger and more muscled than chicken necks, because my Muscovys free range for years before they’re harvested. They are not overfed, fragile little commercial broilers designed to disintegrate at 100 days. Their necks and beaks are their weapons when they fight and they love to fight. You need a knife that can slip in between duck vertebrae and separate the muscle-bound bones, leading to a clean separation. The King-S Chef is that knife. For the first time, I was able to cleanly cut one off (for stock-making collagen, not for eating) without much effort, unlike many previous episodes of scrambling and cursing as a slippery, marinaded duck carcass tries to shoot off the cutting board towards me as I apply force . I didn’t have to apply any muscle, which saved fatigue and let me get a duck in the oven that much faster. There’s not a single bit of meretricious ornamentation on it to catch food debris or juices. I like this knife so much, I just bought it a little Guy Fawkes Day present- a Work Sharp Benchstone, a grown-up-man-dude knife sharpener. [RIP Guy Fawkes, you were a real one.]

0

Send In The Clones! Buck 119 and Gordon

preview

My friends, it is the spooky season once more. Time for bats and pumpkins and tacky lawn decorations galore.

Somehow I’ve been in a bowie frame of mind lately for no particular reason whatsoever that I can identify, so let’s use this one for a gratuitous Halloween themed special.

Here is the iconic, legendary, deeply prolific, and all the other words we can think of to praise the thing, Buck Model 119 Special. This is quite possibly the single most ubiquitous fixed blade knife in America and it’s basically a given at this point that everyone who is into knives in any meaningful capacity either owns has owned one of these at some point in their lives. And if not this, than certainly the very closely related but slightly larger Buck 120, or the mildly downscaled 117.

My brother had one. I’ve owned two of the damn things, one of which vanished some years ago, probably having been stolen by somebody. A good friend of mine infamously carries a 117 every single day in lieu of a folder to the extent that it’s basically become part of his identity.

The Buck 119 is another crocodile, remaining largely unchanged since its introduction since there’s not much about it that needed changing. The details are a little hazy but the thing is veritably Precambrian, as near as anyone can figure being introduced some time around 1942. There have been various minor permutations of handle construction and blade steel, with the originals starting out as carbon tool steel and eventually becoming 440C, then today’s 420HC by about 1994.

Buck stamps a glyph on each one of these nowadays which translates to the year of production. My current one appears to have been manufactured in 2023, and I bought this when the obvious hole in my collection really started to bother me again. As for the one I lost, I have no idea. I bought it from K-Mart in my late teens, I didn’t bother to check its production date and at the time I certainly didn’t care, and now we’ll never know.

So now we’re seven paragraphs in and I still haven’t explained how the hell there’s supposed to be a Halloween connection here.

Well, even if you’re not a knife nerd, if you think you’ve seen this knife before that’s because you probably have.

That’s right, Ghostface’s very own knife from the Scream movies has been consistently depicted as the larger Buck Model 120, which has an identical profile to the 119 aside from being an inch and three eighths longer.

It seems all of the early classic slasher pics are famously duct taped together with an array of low budget prop solutions. Michael Myers’ face being a stretched out and spraypainted store bought William Shatner Halloween mask is well known one, and I imagine back in 1996 Wes Craven or Kevin Williamson or somebody probably bought that Buck 120 right off the peg from a K-Mart someplace in a manner not too dissimilar from how I bought mine.

So the 120 and by extension to a lesser extent the 119 join the short list of actual factual named production knife models that have made it into a popular piece of fiction cast as themselves. Not with any bits glued on, not hacked apart and turned into something else, and in this case certainly not shown only in a passing glimpse.

Thus it joins the ranks with the likes of, say, Raul Duke’s attorney and his Gerber Mini-Magnum, Mickey Rourke’s Cold Steel Espada, and Hit-Girl’s Benchmade Model 42. (And while we’re at it, it will probably not surprise you at all to learn that Jeff Imada’s brief cameo in Cheech and Chong’s Sweet Dreams where he appears as a waiter and smoothly lops the top off of a wine bottle with his balisong knife was hugely formative towards my own career of learning to use and amassing the things.)

Actually, come to think of it Hollywood’s output is just chock-a-block full of knives of all descriptions, very often being wielded exclusively by the bad guys, but nearly all of which are utter fictions made of plastic and foam rubber. It’s rare enough that a real knife makes it onto the screen in any meaningful capacity that I’m struggling to think of any more concrete examples. I’m sure that’s something we can all kibitz about in the comments.

All the classic slasher villains have their signature weapon, be it Jason’s machete, Leatherface’s chainsaw, or the cleaver Michael Myers frequently gets depicted with. Or, and I’m casting around for examples here, perhaps Karl Childers and his eponymous sling blade. But those are all generic objects that are defined by their wielders rather than the other way around. Just by themselves they’re nothing; totally nondescript.

Ghostface’s Buck, on the other hand, has only seemed to creep closer to center stage as the incessant sequels pile up.

While we’re on the topic, the fact that the villains all seem to have knives probably goes a long way towards explaining why society as a whole seems to be so down on knife ownership these days, and why our laws in particular seem to single out specific types of knives for prohibition apparently informed solely by their depictions in movies. I suppose given our legislators’ famously well-documented shortcomings on the topic of separating fantasy from reality, this probably shouldn’t come as much of a surprise. That still doesn’t make it any less stupid, though.

Anyway, back to the 119. Although it can be had with wooden handles as well, the classic versions of the 119/120/117 trio all have their stark black and very glossy phenolic resin handles. That is to say, Bakelite or something very close to it. Like the stuff they used to make rotary dial telephones out of. This must have seemed very modern in the 1940s but it feels almost quaint now.

You’d think this would make the 119 act like a bar of soap in your hand, but surprisingly it doesn’t. In my younger years I professed not to be a huge fan of the 119 for this and other reasons, and broadly considered my ownership of one to be more of an obligation than anything else. Nobody, I declared at the time, could possibly use this thing seriously. But I’ve warmed up to it more recently. We’ve got fingerprints precisely so we can grip things, after all. Provided your hands aren’t covered in grease or possibly butter your purchase on the 119’s handle is actually perfectly satisfactory.

The pommel and guard are steel and near mirror polished. I have no doubt that these contribute to the knife’s screen presence and might have been no small part of the casting decision that got the Buck 120 immortalized on film.

The 119 and its ilk come in a distinctive leather sheath that is aggressively right handed with its wrap around retention strap. This actually has changed slightly over the years, with minutely different cuts to the shape of the strap and certainly updates to Buck’s logo.

As it happens I still have the sheath for my OG 119 although I still have no clue where the knife itself got off to. This one has an older logo variant on it, and maybe some old timer can use this to identify its vintage. Me, I can’t be bothered.

The current 119’s steel is 420HC, which is a choice that has rather infamously garnered Buck kind of a bad rap among the Intertubes’ relentless peanut gallery. The current zeitgeist seems to consider 420HC a thoroughly unexciting steel and totally unworthy of any consideration. “Them Buck knifes just ain’t what they used to be” is a cry apparently heard so often that Tim Leatherman himself went and penned In Defense of 420HC Steel in response — an entire article about it.

Truth be told this is part of what had me down on the 119 in those days of yesteryear myself. But then much later it was Larrin Thomas’ very own chart on knife steel toughnesses that tickled my interest not too long ago, which is obviously the type of thing that’s of considerable interest to me now that I’m an aspiring knifesmith.

What immediately caught my eye was 420HC’s top-of-the-heap ranking, with its dot all the way the hell up there in the stratosphere in the upper left. Yes, lowly old basic, outdated, and extremely unhip 420HC is capable of outperforming not just a wide array of much more expensive stainless steels on sheer toughness, but literally all of them.

The conclusion I’m coming to here is that maybe we’ve been misunderstanding the Buck 119 all along.

It turns out that the 119 is the perfect redneck’s knife, just as it should be. While its edge retention may be unimpressive compared to any number of fancier modern steels, this is readily mitigated by keeping a field stone about your person someplace and if nothing else will provide a vehicle to keep you gainfully employed while you’re sitting around at camp. Meanwhile in exchange, in the hands of any mere man the 119 should be functionally unbreakable. This is ideal for all the types of stabbing, chopping, hacking, and prying uses a particular subset of careless users are likely to subject it to.

And that’s fantastic.

But that’s not all. Oh, it certainly isn’t.

What could possibly be more ominous than the sound of a banjo echoing through the woods on the dark?

Well, if we’re on the topic of rednecks (A group in which I often gleefully include myself), how about the Harbor Freight knockoff of the Buck 119? Yes, there’s a real life honest to goodness pod-person clone of this thing, which you can apparently still walk into any number of retail locations and just buy, and somehow this hasn’t gotten anyone sued. You are doubtlessly aware of this knife, as it has been ragged upon ad nauseam by all of the cutlery related online cults of personality already. Somehow, though, I still couldn’t resist.

As usual for the old Hazard Freight, they’ve invented from the whole cloth a non-brand moniker for this, in this case calling it… “Gordon.”

They’re waiting for you.

In the test chamberrrr.

I find the feature list on the back and its distinctive reek of desperation to be particularly amusing. I’m most fond of “heat treated blade.” Yes, we would certainly hope so. The note about being “perfect for detail work” is also a little rich considering it’s applied to a fixed blade Bowie that’s just a touch over 10-1/2" in overall length.

Once you get over the initial shock brought on by the sheer chutzpah of the thing, you’ll notice that there are several differences between the Gordon and the genuine Buck that are more than just superficial.

The easy to spot ones include the simplified pommel and guard, which in addition to being shaped slightly differently from the real 119 also conspicuously lack the layered black stripe embellishments. This is without a doubt to make manufacturing the thing cheaper. Strangely the Gordon is also minutely longer than the genuine Buck. The 119 is exactly 10-1/2" long (266.7mm) but the Gordon is just about a sixteenth of an inch longer or 268.29mm. It’s unnoticeable until you have both of them lying on the table next to each other, and then it’s impossible to miss.

In exchange the Gordon’s blade is also a tiny bit thinner than the Buck, 0.170" vs. 0.172" (4.318mm/4.3688mm). This may be a further cheapening, or it may just be down to manufacturing tolerances. The difference isn’t much. Likewise the genuine article weighs 7.76 ounces or 219.8 grams sans its sheath. The clone is 7.34 ounces or 208 grams precisely, and its handle is noticeably less dense. The 119’s point of balance is basically right behind the crossguard but the Gordon places it forward of this by about half an inch.

The much less superficial difference is that the Gordon flat out admits to being made of 7Cr17MoV steel, a Chinese alloy broadly equivalent to 440A which somehow manages to be even less exciting than the Buck’s 420HC. 7Cr’s edge retention may theoretically be slightly better than 420HC due to it having a higher potential hardness, but the difference is probably really splitting hairs. It will more importantly have noticeably reduced toughness versus the former. Which if you’re going to dump all of your points into one stat, so to speak, really rather defeats the purpose.

The Gordon’s sheath is also clearly riffing off of the Buck’s but it’s worse. The button snap is a generic black painted one and it’s relocated to the middle rather than the side mounted location on the genuine sheath. The retention strap is a different, simpler, and less attractive shape. Its real problem is that it’s not quite long enough, though, which makes snapping it back over the handle a real chore.

Luckily I have two genuine 119 sheaths so I guess if I’ll ever do anything with this knife I can drop it in my spare one. What anyone else is going to do about it I have no clue. As for myself, I’m thinking of building some kind of generator that runs off of the heat from the scorn and ridicule I’d earn by doing so, and get myself free power forever.

The Buck’s edge is true out of the box, completely aside from mine arriving with the tip already being slightly hooked as if somebody at the factory used it to stab a rock. Maybe they did, and that’s how they test their heat treatment. Who knows.

The Gordon’s edge, meanwhile, is so out of whack that it’s clearly visible to the naked eye.

The rest of the Gordon’s grind is at minimum acceptable, although the surface finish obviously isn’t anywhere near as nice.

This isn’t a repeat of the same glamor shot I put in earlier up the page. This is actually the Gordon, shot from roughly the same angle. From a couple of feet away it does look like the business.

One other piece of trivia I don’t have anywhere better to slip in is the apparent fact that this is made in Vietnam of all places, but “finished” in China. I cannot fathom how that would possibly contribute to making it any less expensive to manufacture, but it clearly must do somehow or else this wouldn’t be stocked at Harbor Freight.

The Inevitable Conclusion

I suppose I should not find it at all surprising what with the Internet being what it is that people are apparently straight-facedly hawking “replica” Scream knives when as we’ve just explored the real thing is literally just a mass produced model from a major manufacturer that you can still buy. Even more baffling is the observation quite a number of these charlatans are trying to sell these for several dollars more than just clicking over to Buck’s website and buying a 120. Or if it comes down to it, just going to any Tractor Supply or Walmart or whatever and walking out with a genuine 119 for a hundred bucks.

If you absolutely must have one that’s a prop for your Halloween costume and you legitimately need it to be made out of plastic or whatever, I can at least sort of respect that.

Or just, like, buy one of these Gordons and butter knife the edge off of it on your grinding wheel for $35.

I can think of no finer use case for it.

My friends, it is the spooky season once more. Time for bats and pumpkins and tacky lawn decorations galore.

Somehow I’ve been in a bowie frame of mind lately for no particular reason whatsoever that I can identify, so let’s use this one for a gratuitous Halloween themed special.

Here is the iconic, legendary, deeply prolific, and all the other words we can think of to praise the thing, Buck Model 119 Special. This is quite possibly the single most ubiquitous fixed blade knife in America and it’s basically a given at this point that everyone who is into knives in any meaningful capacity either owns has owned one of these at some point in their lives. And if not this, than certainly the very closely related but slightly larger Buck 120, or the mildly downscaled 117.

My brother had one. I’ve owned two of the damn things, one of which vanished some years ago, probably having been stolen by somebody. A good friend of mine infamously carries a 117 every single day in lieu of a folder to the extent that it’s basically become part of his identity.

The Buck 119 is another crocodile, remaining largely unchanged since its introduction since there’s not much about it that needed changing. The details are a little hazy but the thing is veritably Precambrian, as near as anyone can figure being introduced some time around 1942. There have been various minor permutations of handle construction and blade steel, with the originals starting out as carbon tool steel and eventually becoming 440C, then today’s 420HC by about 1994.

Buck stamps a glyph on each one of these nowadays which translates to the year of production. My current one appears to have been manufactured in 2023, and I bought this when the obvious hole in my collection really started to bother me again. As for the one I lost, I have no idea. I bought it from K-Mart in my late teens, I didn’t bother to check its production date and at the time I certainly didn’t care, and now we’ll never know.

So now we’re seven paragraphs in and I still haven’t explained how the hell there’s supposed to be a Halloween connection here.

Well, even if you’re not a knife nerd, if you think you’ve seen this knife before that’s because you probably have.

That’s right, Ghostface’s very own knife from the Scream movies has been consistently depicted as the larger Buck Model 120, which has an identical profile to the 119 aside from being an inch and three eighths longer.

It seems all of the early classic slasher pics are famously duct taped together with an array of low budget prop solutions. Michael Myers’ face being a stretched out and spraypainted store bought William Shatner Halloween mask is well known one, and I imagine back in 1996 Wes Craven or Kevin Williamson or somebody probably bought that Buck 120 right off the peg from a K-Mart someplace in a manner not too dissimilar from how I bought mine.

So the 120 and by extension to a lesser extent the 119 join the short list of actual factual named production knife models that have made it into a popular piece of fiction cast as themselves. Not with any bits glued on, not hacked apart and turned into something else, and in this case certainly not shown only in a passing glimpse.

Thus it joins the ranks with the likes of, say, Raul Duke’s attorney and his Gerber Mini-Magnum, Mickey Rourke’s Cold Steel Espada, and Hit-Girl’s Benchmade Model 42. (And while we’re at it, it will probably not surprise you at all to learn that Jeff Imada’s brief cameo in Cheech and Chong’s Sweet Dreams where he appears as a waiter and smoothly lops the top off of a wine bottle with his balisong knife was hugely formative towards my own career of learning to use and amassing the things.)

Actually, come to think of it Hollywood’s output is just chock-a-block full of knives of all descriptions, very often being wielded exclusively by the bad guys, but nearly all of which are utter fictions made of plastic and foam rubber. It’s rare enough that a real knife makes it onto the screen in any meaningful capacity that I’m struggling to think of any more concrete examples. I’m sure that’s something we can all kibitz about in the comments.

All the classic slasher villains have their signature weapon, be it Jason’s machete, Leatherface’s chainsaw, or the cleaver Michael Myers frequently gets depicted with. Or, and I’m casting around for examples here, perhaps Karl Childers and his eponymous sling blade. But those are all generic objects that are defined by their wielders rather than the other way around. Just by themselves they’re nothing; totally nondescript.

Ghostface’s Buck, on the other hand, has only seemed to creep closer to center stage as the incessant sequels pile up.

While we’re on the topic, the fact that the villains all seem to have knives probably goes a long way towards explaining why society as a whole seems to be so down on knife ownership these days, and why our laws in particular seem to single out specific types of knives for prohibition apparently informed solely by their depictions in movies. I suppose given our legislators’ famously well-documented shortcomings on the topic of separating fantasy from reality, this probably shouldn’t come as much of a surprise. That still doesn’t make it any less stupid, though.

Anyway, back to the 119. Although it can be had with wooden handles as well, the classic versions of the 119/120/117 trio all have their stark black and very glossy phenolic resin handles. That is to say, Bakelite or something very close to it. Like the stuff they used to make rotary dial telephones out of. This must have seemed very modern in the 1940s but it feels almost quaint now.

You’d think this would make the 119 act like a bar of soap in your hand, but surprisingly it doesn’t. In my younger years I professed not to be a huge fan of the 119 for this and other reasons, and broadly considered my ownership of one to be more of an obligation than anything else. Nobody, I declared at the time, could possibly use this thing seriously. But I’ve warmed up to it more recently. We’ve got fingerprints precisely so we can grip things, after all. Provided your hands aren’t covered in grease or possibly butter your purchase on the 119’s handle is actually perfectly satisfactory.

The pommel and guard are steel and near mirror polished. I have no doubt that these contribute to the knife’s screen presence and might have been no small part of the casting decision that got the Buck 120 immortalized on film.

The 119 and its ilk come in a distinctive leather sheath that is aggressively right handed with its wrap around retention strap. This actually has changed slightly over the years, with minutely different cuts to the shape of the strap and certainly updates to Buck’s logo.

As it happens I still have the sheath for my OG 119 although I still have no clue where the knife itself got off to. This one has an older logo variant on it, and maybe some old timer can use this to identify its vintage. Me, I can’t be bothered.

The current 119’s steel is 420HC, which is a choice that has rather infamously garnered Buck kind of a bad rap among the Intertubes’ relentless peanut gallery. The current zeitgeist seems to consider 420HC a thoroughly unexciting steel and totally unworthy of any consideration. “Them Buck knifes just ain’t what they used to be” is a cry apparently heard so often that Tim Leatherman himself went and penned In Defense of 420HC Steel in response — an entire article about it.

Truth be told this is part of what had me down on the 119 in those days of yesteryear myself. But then much later it was Larrin Thomas’ very own chart on knife steel toughnesses that tickled my interest not too long ago, which is obviously the type of thing that’s of considerable interest to me now that I’m an aspiring knifesmith.

What immediately caught my eye was 420HC’s top-of-the-heap ranking, with its dot all the way the hell up there in the stratosphere in the upper left. Yes, lowly old basic, outdated, and extremely unhip 420HC is capable of outperforming not just a wide array of much more expensive stainless steels on sheer toughness, but literally all of them.

The conclusion I’m coming to here is that maybe we’ve been misunderstanding the Buck 119 all along.

It turns out that the 119 is the perfect redneck’s knife, just as it should be. While its edge retention may be unimpressive compared to any number of fancier modern steels, this is readily mitigated by keeping a field stone about your person someplace and if nothing else will provide a vehicle to keep you gainfully employed while you’re sitting around at camp. Meanwhile in exchange, in the hands of any mere man the 119 should be functionally unbreakable. This is ideal for all the types of stabbing, chopping, hacking, and prying uses a particular subset of careless users are likely to subject it to.

And that’s fantastic.

But that’s not all. Oh, it certainly isn’t.

What could possibly be more ominous than the sound of a banjo echoing through the woods on the dark?

Well, if we’re on the topic of rednecks (A group in which I often gleefully include myself), how about the Harbor Freight knockoff of the Buck 119? Yes, there’s a real life honest to goodness pod-person clone of this thing, which you can apparently still walk into any number of retail locations and just buy, and somehow this hasn’t gotten anyone sued. You are doubtlessly aware of this knife, as it has been ragged upon ad nauseam by all of the cutlery related online cults of personality already. Somehow, though, I still couldn’t resist.

As usual for the old Hazard Freight, they’ve invented from the whole cloth a non-brand moniker for this, in this case calling it… “Gordon.”

They’re waiting for you.

In the test chamberrrr.

I find the feature list on the back and its distinctive reek of desperation to be particularly amusing. I’m most fond of “heat treated blade.” Yes, we would certainly hope so. The note about being “perfect for detail work” is also a little rich considering it’s applied to a fixed blade Bowie that’s just a touch over 10-1/2" in overall length.

Once you get over the initial shock brought on by the sheer chutzpah of the thing, you’ll notice that there are several differences between the Gordon and the genuine Buck that are more than just superficial.

The easy to spot ones include the simplified pommel and guard, which in addition to being shaped slightly differently from the real 119 also conspicuously lack the layered black stripe embellishments. This is without a doubt to make manufacturing the thing cheaper. Strangely the Gordon is also minutely longer than the genuine Buck. The 119 is exactly 10-1/2" long (266.7mm) but the Gordon is just about a sixteenth of an inch longer or 268.29mm. It’s unnoticeable until you have both of them lying on the table next to each other, and then it’s impossible to miss.

In exchange the Gordon’s blade is also a tiny bit thinner than the Buck, 0.170" vs. 0.172" (4.318mm/4.3688mm). This may be a further cheapening, or it may just be down to manufacturing tolerances. The difference isn’t much. Likewise the genuine article weighs 7.76 ounces or 219.8 grams sans its sheath. The clone is 7.34 ounces or 208 grams precisely, and its handle is noticeably less dense. The 119’s point of balance is basically right behind the crossguard but the Gordon places it forward of this by about half an inch.

The much less superficial difference is that the Gordon flat out admits to being made of 7Cr17MoV steel, a Chinese alloy broadly equivalent to 440A which somehow manages to be even less exciting than the Buck’s 420HC. 7Cr’s edge retention may theoretically be slightly better than 420HC due to it having a higher potential hardness, but the difference is probably really splitting hairs. It will more importantly have noticeably reduced toughness versus the former. Which if you’re going to dump all of your points into one stat, so to speak, really rather defeats the purpose.

The Gordon’s sheath is also clearly riffing off of the Buck’s but it’s worse. The button snap is a generic black painted one and it’s relocated to the middle rather than the side mounted location on the genuine sheath. The retention strap is a different, simpler, and less attractive shape. Its real problem is that it’s not quite long enough, though, which makes snapping it back over the handle a real chore.

Luckily I have two genuine 119 sheaths so I guess if I’ll ever do anything with this knife I can drop it in my spare one. What anyone else is going to do about it I have no clue. As for myself, I’m thinking of building some kind of generator that runs off of the heat from the scorn and ridicule I’d earn by doing so, and get myself free power forever.

The Buck’s edge is true out of the box, completely aside from mine arriving with the tip already being slightly hooked as if somebody at the factory used it to stab a rock. Maybe they did, and that’s how they test their heat treatment. Who knows.

The Gordon’s edge, meanwhile, is so out of whack that it’s clearly visible to the naked eye.

The rest of the Gordon’s grind is at minimum acceptable, although the surface finish obviously isn’t anywhere near as nice.

This isn’t a repeat of the same glamor shot I put in earlier up the page. This is actually the Gordon, shot from roughly the same angle. From a couple of feet away it does look like the business.

One other piece of trivia I don’t have anywhere better to slip in is the apparent fact that this is made in Vietnam of all places, but “finished” in China. I cannot fathom how that would possibly contribute to making it any less expensive to manufacture, but it clearly must do somehow or else this wouldn’t be stocked at Harbor Freight.

The Inevitable Conclusion

I suppose I should not find it at all surprising what with the Internet being what it is that people are apparently straight-facedly hawking “replica” Scream knives when as we’ve just explored the real thing is literally just a mass produced model from a major manufacturer that you can still buy. Even more baffling is the observation quite a number of these charlatans are trying to sell these for several dollars more than just clicking over to Buck’s website and buying a 120. Or if it comes down to it, just going to any Tractor Supply or Walmart or whatever and walking out with a genuine 119 for a hundred bucks.

If you absolutely must have one that’s a prop for your Halloween costume and you legitimately need it to be made out of plastic or whatever, I can at least sort of respect that.

Or just, like, buy one of these Gordons and butter knife the edge off of it on your grinding wheel for $35.

I can think of no finer use case for it.

0

Nah, Mate. *This* Is A Knife.

preview

If we’re taking the view that this community is supposed to be for, you know, folders and the like, this is easily the second or third least appropriate thing I’ve posted here.

I went on about this thing’s construction at some length, but rather than repeat all of that here I’ll just leave you this and you can take it or leave it as you please.

I promise I’ll get back to semi-regular shitposting about zany novelty shit at some point soon, but in the meantime I’m just having way too much fun.

If we’re taking the view that this community is supposed to be for, you know, folders and the like, this is easily the second or third least appropriate thing I’ve posted here.

I went on about this thing’s construction at some length, but rather than repeat all of that here I’ll just leave you this and you can take it or leave it as you please.

I promise I’ll get back to semi-regular shitposting about zany novelty shit at some point soon, but in the meantime I’m just having way too much fun.

0

Pinfeathers

preview

Some noodling around, and just a touch of chest-beating, as usual. I put the finishing touches on this last night, which I’ve dubbed the Pinfeather.

How do we feel about this profile?

This is some kind of mutant hybrid between a small hunter and a paring knife. This is another offcut deal, this time not only the steel (CPM154, if it interests you) but also some leftover bits of walnut that I used for a prior commission which is now in the hands of another denizen of this very board.

Truth be told I’m not entirely happy with the outcome, here, but largely that’s due to my own ineptitude in woodworking. Originally the idea was to Corby bolt this together but it turned out my bolts were too long, so I changed horses in the middle of the race to pinning it with some brass rod instead. But that required drilling the old Corbies out, and this explains the small but noticeable mismatch between the diameter of the pin holes and the pins. I backfilled these with epoxy, and likewise with the small gouge taken out of the reverse of the handle.

I’m told that this sort of thing confers charm, and is evidence that the article in question is hand made.

Next time, I think I’ll just do a better job.

In light of all of the above, it may surprise you to learn that I had enough steel to make two (2) identical blanks. I haven’t hewn the handle for the second one yet. I’m planning on giving the first one away, but I haven’t decided on what to do with the second one yet. Perhaps if anyone here is interested, drop me a line and I’ll make it available.

Some noodling around, and just a touch of chest-beating, as usual. I put the finishing touches on this last night, which I’ve dubbed the Pinfeather.

How do we feel about this profile?

This is some kind of mutant hybrid between a small hunter and a paring knife. This is another offcut deal, this time not only the steel (CPM154, if it interests you) but also some leftover bits of walnut that I used for a prior commission which is now in the hands of another denizen of this very board.

Truth be told I’m not entirely happy with the outcome, here, but largely that’s due to my own ineptitude in woodworking. Originally the idea was to Corby bolt this together but it turned out my bolts were too long, so I changed horses in the middle of the race to pinning it with some brass rod instead. But that required drilling the old Corbies out, and this explains the small but noticeable mismatch between the diameter of the pin holes and the pins. I backfilled these with epoxy, and likewise with the small gouge taken out of the reverse of the handle.

I’m told that this sort of thing confers charm, and is evidence that the article in question is hand made.

Next time, I think I’ll just do a better job.

In light of all of the above, it may surprise you to learn that I had enough steel to make two (2) identical blanks. I haven’t hewn the handle for the second one yet. I’m planning on giving the first one away, but I haven’t decided on what to do with the second one yet. Perhaps if anyone here is interested, drop me a line and I’ll make it available.

0

Weird Knife Wednesday: CIVIVI Purr

preview

Well, it’s finally happened. At long last I’ve devolved or, perhaps, succumbed to making my contribution to the One True Purpose of the Internet.

You know. Cats.

What did you think I was going to suggest?

Verily, the CIVIVI Purr has a certain design philosophy. A multitude of variants are available, although alas none of them fully match the colorways of any of my household’s furry tripping hazards. Since you can’t have everything, I went with this grey and white number. In addition to the obvious, it doesn’t half look like a certain someone, doesn’t it? That certainly helped my decision.

Just look at him face. It’s got two front kickers for ears, the eyes are a pair of Torx screws, and it’s even complete with a tail made of accessory cord. The tail could even be unwound into a lanyard, but it’s just so twee as it is that I can’t bring myself to do it. And not least of which because then I’d have to learn how to tie it up like that again.

The CIVIVI Purr has precisely two buyers, to wit: Complete and utter dweebs like me, and men (universally men) who are hoping to get their girlfriends, wives, or sundry significant others into knives. Thus I suspect this is aiming to be a “friendly” pocketknife, and in addition to the cutesy aesthetic also offers simplified operation without any locks or latches and a much easier opening action than, say, your garden variety Swiss Army Knife.

It’s quite diminutive. By my measure it’s basically exactly 4-5/8" long open (117.5mm) and the blade is a mere 1-13/16" (46mm). Its footprint isn’t that much bigger than the obligatory Swiss Classic and while it doesn’t offer scissors or a nail file, it certainly does offer a lot more knife. The blade is only 0.098" thick or 2.5mm and is flat ground for much of its length. The edge just barely hangs down below the bottom of the handle so you can get all but the tiniest bit of it against a flat surface if you have to. The total weight is a mere yet suspiciously exact 1.5 ounces or 42.4 grams including the lanyard.

Two other things the Purr offers are real-deal scales with at least some modicum of grip texture and concession to ergonomics thanks to the scallops in the edges, and…

…An honest to goodness pocket clip, which is certainly a rarity with this kind of thing. It’s even reversible, slotting into a pair of channels on either side of the scales in a very Spyderco-esque fashion with a single central screw.

CIVIVI certainly could have phoned this entire thing in and probably gotten away with it. But they didn’t, somehow and this makes me highly suspicious. This kind of cutesy micro-knife is normally supposed to be a mere novelty, the kind of token stocking stuffer that doesn’t have to be undertaken seriously because nobody is intended to take it seriously in the first place. There it will languish at the bottom of her stationery drawer for all eternity, except in the case of the Purr it probably shouldn’t because it’s actually remarkably competent.

It’s even made of a real steel. Nitro-V is not too far away from 14C28N in the grand scheme of things and possesses far more toughness than this tiny little thing has any business needing. In any world where anybody more cynical than CIVIVI made this thing it’d surely be hewn out of some low-rent junk like 3cr or 420A or something. It’s positively baffling, but I’m not complaining.

It’s a slip joint folder. You won’t find a back lock or a liner lock, because there isn’t a lock at all. It does click positively into either of its positions with a pair of ball detents, though. Opening and closing it ought to be perfectly intuitive for just about anybody, and the lack of a liner lock removes the evergreen temptation to have your fingers between the blade and the handle while you struggle with closing it, neatly obviating that whole chestnut.

This also has the side effect of leaving the Purr with absolutely zero tactical appeal. I suggest that’s the entire point, really.

The blade’s got this vaguely triangular drop pointed profile with jimping all up and down the back of it. It’s got a nice satiny finish and is deceptively sharp out of the box. The Purr’s cutting ability is very good despite its diminutive size due to its blade geometry. Being thin in cross section and having a shape that’s snag-free on material passing by always makes a blade a good cutter.

Opening it feels slick, and you can use either of the ears to do so. I prefer the rearward one, personally. The detents are pretty strong but once you overcome them the blade flies open with a satisfying click. The only complaint I really have is that given that the thing is completely outwardly symmetrical it’s not exactly intuitive to figure out which side you ought to open it from. You can tell if you look at it hard but there’s not much indicator if you’re going by feel. Your best bet is to remember which way it goes relative to the clip.

The Purr also comes with a ludicrous array of feelies. You get a hugely superfluous fleece lined zipper pouch that’s about nine times larger than it needs to be, several bits of promotional bumf, a microfiber cleaning cloth, and I was pleased to discover that the knife shaped card in there is actually a sticker.

I know there are a select two or three of you, and you know who you are, who have been perched on the edge of your computer chairs for the last five minutes wondering when I’m finally going to get around to revealing just how the Purr works mechanically. Because charming though they may be, it’s obvious to anyone paying attention that neither of those cat’s-eye screws could possibly be where the pivot is.

And you’re right, they aren’t.

Popping the scales off requires nothing more than undoing those two plus the tail screw on whichever side, optionally dropping the clip off in the process as well. They’re all T8 Torx heads. The actual pivot screw is concealed beneath, right in the center.

This reveals the detent action, which obviously isn’t quite the traditional slip joint arrangement because the Purr hasn’t got any kind of backspacer. You’ll also notice that the detent balls are ceramic. Swanky.

What’s also ceramic are the Purr’s tiny ball bearings, which are a luxury that have absolutely no business being in here. And yet, here they are anyway. This goes some way towards explaining the pivot action. I’m down for it.

It turns out there’s a detent in both sides of the liners. The endstop is provided by a captive pin which is hidden in a channel in the blade.

It is at this juncture I must regretfully advise you that the above spread of parts is minus the Purr’s swanky machined tail spacer, into which the clip is screwed. This is because I completely forgot to transfer it from my parts tray to the photo booth.

By way of apology please accept this macro shot of the same, which I took upon discovery of my blunder when reassembling the knife. It is with a heavy heart that I tell you I could not, alas, be bothered to take it all apart again just to rearrange that photo.

Beets dubs, the inner faces of the scales also make a face at you. It’s either very surprised, or possibly a Sniffit.

The Inevitable Conclusion

Among the Purr’s pack-ins you also get what would normally be the perfunctory instructions leaflet that always comes with this sort of thing. Don’t use this as a screwdriver, don’t use it to pry the lid off of a coffin, don’t bury it in your front yard or stick it in your dishwasher or drop it in the ocean. You know how it is.

Well, no. I submit to you that in fact CIVIVI know exactly how it is. I have never in all my years seen a mere piece of instructional literature hit the nail on the head so squarely.

This is threatening to launch me on my usual rant about knives and their role in society, one that I’m sure I’ve inflicted upon all of you in this very space many times in the past. I would do so while swirling the brandy around in my glass and gesticulating pointedly with my pipe now and again, if I had either a brandy glass or a pipe.

The rarely spoken out loud but pervasive notion that you must be kind of a nut if you carry a knife on a daily basis is stupid. And anyone who thinks that way is stupid, too. You can tell them I said so.

Everyone should have a knife. It doesn’t have to be some kind of Tacticool Black Blade Serrated Taliban Skewer XRZ-9000. It really doesn’t — I think the Purr proves this perfectly. It’s time we as a society were less down on mankind’s second oldest tool. Cut the little knife a break. There is absolutely no need to freak out if someone shows up with a sub 2" cat shaped pocketknife at the office as if they’d just unlatched their briefcase over the conference room table and out thudded nine pounds of enriched plutonium.

Relax. It’ll be okay, trust me.

In fact, in every social circle I’ve traveled in it’s always amused me how the cycle so quickly and reliably progresses from, “I can’t believe you carry that thing around with you, what could you possibly need that for?” To, “Do you have your knife on you today?” And inevitably, “Hey, can I borrow your knife for a sec?”

The ideal end to that trail of conversation is, of course, “So, you’re the knife guy. What first knife do you think I should buy?”

Right now at this exact second, it feels like this one might be the right answer.

Well, it’s finally happened. At long last I’ve devolved or, perhaps, succumbed to making my contribution to the One True Purpose of the Internet.

You know. Cats.

What did you think I was going to suggest?

Verily, the CIVIVI Purr has a certain design philosophy. A multitude of variants are available, although alas none of them fully match the colorways of any of my household’s furry tripping hazards. Since you can’t have everything, I went with this grey and white number. In addition to the obvious, it doesn’t half look like a certain someone, doesn’t it? That certainly helped my decision.

Just look at him face. It’s got two front kickers for ears, the eyes are a pair of Torx screws, and it’s even complete with a tail made of accessory cord. The tail could even be unwound into a lanyard, but it’s just so twee as it is that I can’t bring myself to do it. And not least of which because then I’d have to learn how to tie it up like that again.

The CIVIVI Purr has precisely two buyers, to wit: Complete and utter dweebs like me, and men (universally men) who are hoping to get their girlfriends, wives, or sundry significant others into knives. Thus I suspect this is aiming to be a “friendly” pocketknife, and in addition to the cutesy aesthetic also offers simplified operation without any locks or latches and a much easier opening action than, say, your garden variety Swiss Army Knife.

It’s quite diminutive. By my measure it’s basically exactly 4-5/8" long open (117.5mm) and the blade is a mere 1-13/16" (46mm). Its footprint isn’t that much bigger than the obligatory Swiss Classic and while it doesn’t offer scissors or a nail file, it certainly does offer a lot more knife. The blade is only 0.098" thick or 2.5mm and is flat ground for much of its length. The edge just barely hangs down below the bottom of the handle so you can get all but the tiniest bit of it against a flat surface if you have to. The total weight is a mere yet suspiciously exact 1.5 ounces or 42.4 grams including the lanyard.

Two other things the Purr offers are real-deal scales with at least some modicum of grip texture and concession to ergonomics thanks to the scallops in the edges, and…

…An honest to goodness pocket clip, which is certainly a rarity with this kind of thing. It’s even reversible, slotting into a pair of channels on either side of the scales in a very Spyderco-esque fashion with a single central screw.

CIVIVI certainly could have phoned this entire thing in and probably gotten away with it. But they didn’t, somehow and this makes me highly suspicious. This kind of cutesy micro-knife is normally supposed to be a mere novelty, the kind of token stocking stuffer that doesn’t have to be undertaken seriously because nobody is intended to take it seriously in the first place. There it will languish at the bottom of her stationery drawer for all eternity, except in the case of the Purr it probably shouldn’t because it’s actually remarkably competent.

It’s even made of a real steel. Nitro-V is not too far away from 14C28N in the grand scheme of things and possesses far more toughness than this tiny little thing has any business needing. In any world where anybody more cynical than CIVIVI made this thing it’d surely be hewn out of some low-rent junk like 3cr or 420A or something. It’s positively baffling, but I’m not complaining.

It’s a slip joint folder. You won’t find a back lock or a liner lock, because there isn’t a lock at all. It does click positively into either of its positions with a pair of ball detents, though. Opening and closing it ought to be perfectly intuitive for just about anybody, and the lack of a liner lock removes the evergreen temptation to have your fingers between the blade and the handle while you struggle with closing it, neatly obviating that whole chestnut.

This also has the side effect of leaving the Purr with absolutely zero tactical appeal. I suggest that’s the entire point, really.

The blade’s got this vaguely triangular drop pointed profile with jimping all up and down the back of it. It’s got a nice satiny finish and is deceptively sharp out of the box. The Purr’s cutting ability is very good despite its diminutive size due to its blade geometry. Being thin in cross section and having a shape that’s snag-free on material passing by always makes a blade a good cutter.

Opening it feels slick, and you can use either of the ears to do so. I prefer the rearward one, personally. The detents are pretty strong but once you overcome them the blade flies open with a satisfying click. The only complaint I really have is that given that the thing is completely outwardly symmetrical it’s not exactly intuitive to figure out which side you ought to open it from. You can tell if you look at it hard but there’s not much indicator if you’re going by feel. Your best bet is to remember which way it goes relative to the clip.

The Purr also comes with a ludicrous array of feelies. You get a hugely superfluous fleece lined zipper pouch that’s about nine times larger than it needs to be, several bits of promotional bumf, a microfiber cleaning cloth, and I was pleased to discover that the knife shaped card in there is actually a sticker.

I know there are a select two or three of you, and you know who you are, who have been perched on the edge of your computer chairs for the last five minutes wondering when I’m finally going to get around to revealing just how the Purr works mechanically. Because charming though they may be, it’s obvious to anyone paying attention that neither of those cat’s-eye screws could possibly be where the pivot is.

And you’re right, they aren’t.

Popping the scales off requires nothing more than undoing those two plus the tail screw on whichever side, optionally dropping the clip off in the process as well. They’re all T8 Torx heads. The actual pivot screw is concealed beneath, right in the center.

This reveals the detent action, which obviously isn’t quite the traditional slip joint arrangement because the Purr hasn’t got any kind of backspacer. You’ll also notice that the detent balls are ceramic. Swanky.

What’s also ceramic are the Purr’s tiny ball bearings, which are a luxury that have absolutely no business being in here. And yet, here they are anyway. This goes some way towards explaining the pivot action. I’m down for it.

It turns out there’s a detent in both sides of the liners. The endstop is provided by a captive pin which is hidden in a channel in the blade.

It is at this juncture I must regretfully advise you that the above spread of parts is minus the Purr’s swanky machined tail spacer, into which the clip is screwed. This is because I completely forgot to transfer it from my parts tray to the photo booth.

By way of apology please accept this macro shot of the same, which I took upon discovery of my blunder when reassembling the knife. It is with a heavy heart that I tell you I could not, alas, be bothered to take it all apart again just to rearrange that photo.

Beets dubs, the inner faces of the scales also make a face at you. It’s either very surprised, or possibly a Sniffit.

The Inevitable Conclusion

Among the Purr’s pack-ins you also get what would normally be the perfunctory instructions leaflet that always comes with this sort of thing. Don’t use this as a screwdriver, don’t use it to pry the lid off of a coffin, don’t bury it in your front yard or stick it in your dishwasher or drop it in the ocean. You know how it is.

Well, no. I submit to you that in fact CIVIVI know exactly how it is. I have never in all my years seen a mere piece of instructional literature hit the nail on the head so squarely.

This is threatening to launch me on my usual rant about knives and their role in society, one that I’m sure I’ve inflicted upon all of you in this very space many times in the past. I would do so while swirling the brandy around in my glass and gesticulating pointedly with my pipe now and again, if I had either a brandy glass or a pipe.

The rarely spoken out loud but pervasive notion that you must be kind of a nut if you carry a knife on a daily basis is stupid. And anyone who thinks that way is stupid, too. You can tell them I said so.

Everyone should have a knife. It doesn’t have to be some kind of Tacticool Black Blade Serrated Taliban Skewer XRZ-9000. It really doesn’t — I think the Purr proves this perfectly. It’s time we as a society were less down on mankind’s second oldest tool. Cut the little knife a break. There is absolutely no need to freak out if someone shows up with a sub 2" cat shaped pocketknife at the office as if they’d just unlatched their briefcase over the conference room table and out thudded nine pounds of enriched plutonium.

Relax. It’ll be okay, trust me.

In fact, in every social circle I’ve traveled in it’s always amused me how the cycle so quickly and reliably progresses from, “I can’t believe you carry that thing around with you, what could you possibly need that for?” To, “Do you have your knife on you today?” And inevitably, “Hey, can I borrow your knife for a sec?”

The ideal end to that trail of conversation is, of course, “So, you’re the knife guy. What first knife do you think I should buy?”

Right now at this exact second, it feels like this one might be the right answer.

0

Weird Knife Wednesday: Dajo Survivor DJ00918

preview

And depending on how long I let this drag on, it might even wind up becoming a Throwback Thursday in some time zones.

Here’s the Dajo Survivor, the OG version, my example of which is certainly old enough to vote and is one of the quintessential sort of early hipster backpacker’s knives, or at least one of the first ones I became aware of. I bought this from Eastern Mountain Sports back in the day, which ought to clue you in right there. They had like six knives in the entire store, two of which were Leathermen and three of which were Swiss Army models, and the last one was this.

Dajo are, surprisingly, apparently still around, hawking a moderate selection of what appear to largely be white label OEM sorts of outdoor goods. You just know you’re bound to be in for a good time when you score a blade made from a company one of whom’s major top level product categories is apparently just “hats.” Their deliberately semi-ironic wiggly sun logo is still the same, and is as ever pushing very hard for the quirky-friendly-environmental Sedona gift shop vibe. It’s all aimed squarely at the sort of folks who are never seen wearing anything but one of their “life is good” tee shirts.

They also have a smattering of knives, of course. Some of which seem suspiciously reminiscent of articles we’ve looked at in the past. I can’t prove any relationship between the two, but sure seems mighty coincidental.

How the hell I of all people wound up with the thing is handily explained by it being one of the many, many stepping stones on my years-long snipe hunt trying to find the perfect fixed blade camp knife. This was an odyssey that wound up with me fruitlessly chasing many unicorns until ultimately arriving at the inevitable and obvious conclusion, and we all know how that turned out. I’m sure we’ll explore more of it in due course.

The Survivor, whose model designation is not marked on it anywhere, is one of those minimalist chic sort of things with a skeletonized handle and slotted blade, all vying to convince the type of person who walks around all day worrying about their weight budget that they could totally to afford to allocate some of it to this. Even so it’s 107.8 grams or 3.8 ounces all by itself — not including the sheath, of which more in a moment — which is well within the ballpark of quite a number of folding knives. Except this, of course, doesn’t fold.

It’s folding knife sized, too, at 7-3/8" (187.3mm) long with a 3-5/8" (92.07mm) blade at 0.111" (2.81mm) thick, very nearly but not quite all of which is usable because it terminates in a tiny ricasso just forward of the handle. It hasn’t got a choil. It could really use one, and would look a lot better with one, but it ain’t there. And I’m not about to go grinding one into mine because it would obviously detract from the original collector’s value. That, and I can’t be bothered.

To make up for it, there’s this notch in the spine which Dajo make a great deal of noise about being provided specifically for the purposes of striking your fire starting ferro rod with it.

What ferro rod? Well, I’m glad you asked.

You see, the Survivor is actually a kit^1^, and it’s one of those things that seeks to sweeten you on its value proposition by including a bunch of extra trinkets. The original package included a ferro rod, a tiny whistle, and a couple of feet of paracord. It may surprise you to learn that I knew exactly where my Dajo’s ferro rod was and I dutifully went and retrieved it for the purposes of this column. And it will likewise not at all surprise you that I haven’t got the foggiest idea where the hell its whistle got off to.

That’s not much of a loss. As I recall it didn’t work very well, and out in the woods you’re certain to already have any amount of dinky whistles about your person including the one on your backpack’s chest strap, on your compass, on the back of your carbiner, built into your can opener, et cetera, et cetera. I’m furthermore convinced no one in all of human history has ever starved in the woods in any situation where their ability or lack thereof to make a pathetic “fweet” noise has made the slightest difference. Rather, the primary purpose of such articles seems to be to get the fathers of the world to threaten to turn this car right back around, mister and/or miss, if their progeny doesn’t quit incessantly screeching the damn thing from the back seat.

I have a real whistle, a big plastic neon orange one strapped to my flotation vest that I use when I’m boating, with which it’s highly advisable to stick your fingers in both ears before blowing it. It’s probably audible from the moon. The one that came with this ain’t it.

The ballistic nylon sheath of course contains two little dedicated pockets, one each for the ferro rod and the whistle. Since I haven’t got the latter anymore I cast about for some other suitable survival article to put there, practically any of which you can think of would be more useful.

Ah, there we are. Some field rations will do.

The Survivor’s sheath is actually rather ghastly. It’s all Velcro panels and fold-overs, and while Dajo claim it can be worn either vertically or horizontally, you can only do the former if you really have an unrealistically thin belt. It really seems to be designed with horizontal scout carry in mind. Among its various shortcomings is the lack of a stiffening insert, instead just having a couple of panels of faux-leather stitched to the inside instead. That means that if you do scout carry it tends to develop a curvature when it’s empty that makes reinserting the knife even more of a delicate affair than it already would be. That’s because if you keep the knife even moderately sharp it’ll be prone to start slicing through the throat of its own sheath, noodle quotient or not, since it’s just bare fabric there. Retention is by way of a horrible Velcro strap that wraps around the handle and is forever in the way, as these things tend to go.

The Survivor’s handle is highly skeletonized and is comprised of a pair of G-10 slabs riveted over the tang. Dajo claim that this makes it ideal for lashing to a stick with the included cord to produce a makeshift spear, which is an activity that no sane individual has ever done; If you’re already holding a stout enough stick and a knife, the obvious and much less stupid answer is to just sharpen your stick into a point. You know, one which you won’t care if you drive it full on into a rock because you’ve failed to account for water’s refraction and therefore missed the fish you were aiming for by a full six inches.

The survivor comes from a time when nobody had heard of 7cr steel, really, and we thought all those letters and numbers in it must have made it exotic and therefore obviously good. Right? Little did we know until later that it’s basically the Chinese equivalent to 440A, an alloy that was already not terribly exciting in 2006. It’s a good fit for something like this, I suppose, being a reasonably tough and extremely corrosion resistant steel suitable for careless use and storage. You could probably jigger a way to keep a tiny sharpening stone in the Survivor’s sheath somehow, and if you did it’d give you something to do every night in camp since its edge retention is thoroughly unexciting.

The knife’s only other marking is the Dajo logo laser marked on the front.

The Inevitable Conclusion

Job number one for the Survivor is probably to press a Kydex sheath for it. Dajo seem to have come to this conclusion themselves, because that’s exactly what they’ve done with the latest version of it. I’m sure that’s very nice and all, but it lacks sufficient kitsch.

For its time this was probably a revelation as compared to what we were already used to with “survival” knives, which were those ubiquitous Rambo lookin’ things with their hollow aluminum handles for storing your matches in but nothing resembling a tang. This Dajo, then, must have seemed like a whole new dawn. It’s fresh, it’s elegant, it’s minimal. Svelte, even. And it’s all one piece so it probably won’t snap right off at the handle. Although, now that we’re on the topic you probably shouldn’t try too much batoning with it what with that big slot cut in the blade.

But then, absolutely everything interesting there is to say about the Survivor is already immediately apparent as soon as you look at it. It looks interesting, yes. That’s all it’s got. You hope owning it will make you seem interesting, too, when people see you playing around with it around the campfire.

But it won’t. You’ll have manage that part by yourself.

So hey, did I ever tell you about that time I bought this knife…?


^1^ I stole this image from Knifecenter, by the way. Apparently they managed not to lose their whistle prior to photography.

And depending on how long I let this drag on, it might even wind up becoming a Throwback Thursday in some time zones.

Here’s the Dajo Survivor, the OG version, my example of which is certainly old enough to vote and is one of the quintessential sort of early hipster backpacker’s knives, or at least one of the first ones I became aware of. I bought this from Eastern Mountain Sports back in the day, which ought to clue you in right there. They had like six knives in the entire store, two of which were Leathermen and three of which were Swiss Army models, and the last one was this.

Dajo are, surprisingly, apparently still around, hawking a moderate selection of what appear to largely be white label OEM sorts of outdoor goods. You just know you’re bound to be in for a good time when you score a blade made from a company one of whom’s major top level product categories is apparently just “hats.” Their deliberately semi-ironic wiggly sun logo is still the same, and is as ever pushing very hard for the quirky-friendly-environmental Sedona gift shop vibe. It’s all aimed squarely at the sort of folks who are never seen wearing anything but one of their “life is good” tee shirts.

They also have a smattering of knives, of course. Some of which seem suspiciously reminiscent of articles we’ve looked at in the past. I can’t prove any relationship between the two, but sure seems mighty coincidental.

How the hell I of all people wound up with the thing is handily explained by it being one of the many, many stepping stones on my years-long snipe hunt trying to find the perfect fixed blade camp knife. This was an odyssey that wound up with me fruitlessly chasing many unicorns until ultimately arriving at the inevitable and obvious conclusion, and we all know how that turned out. I’m sure we’ll explore more of it in due course.

The Survivor, whose model designation is not marked on it anywhere, is one of those minimalist chic sort of things with a skeletonized handle and slotted blade, all vying to convince the type of person who walks around all day worrying about their weight budget that they could totally to afford to allocate some of it to this. Even so it’s 107.8 grams or 3.8 ounces all by itself — not including the sheath, of which more in a moment — which is well within the ballpark of quite a number of folding knives. Except this, of course, doesn’t fold.

It’s folding knife sized, too, at 7-3/8" (187.3mm) long with a 3-5/8" (92.07mm) blade at 0.111" (2.81mm) thick, very nearly but not quite all of which is usable because it terminates in a tiny ricasso just forward of the handle. It hasn’t got a choil. It could really use one, and would look a lot better with one, but it ain’t there. And I’m not about to go grinding one into mine because it would obviously detract from the original collector’s value. That, and I can’t be bothered.

To make up for it, there’s this notch in the spine which Dajo make a great deal of noise about being provided specifically for the purposes of striking your fire starting ferro rod with it.

What ferro rod? Well, I’m glad you asked.

You see, the Survivor is actually a kit^1^, and it’s one of those things that seeks to sweeten you on its value proposition by including a bunch of extra trinkets. The original package included a ferro rod, a tiny whistle, and a couple of feet of paracord. It may surprise you to learn that I knew exactly where my Dajo’s ferro rod was and I dutifully went and retrieved it for the purposes of this column. And it will likewise not at all surprise you that I haven’t got the foggiest idea where the hell its whistle got off to.

That’s not much of a loss. As I recall it didn’t work very well, and out in the woods you’re certain to already have any amount of dinky whistles about your person including the one on your backpack’s chest strap, on your compass, on the back of your carbiner, built into your can opener, et cetera, et cetera. I’m furthermore convinced no one in all of human history has ever starved in the woods in any situation where their ability or lack thereof to make a pathetic “fweet” noise has made the slightest difference. Rather, the primary purpose of such articles seems to be to get the fathers of the world to threaten to turn this car right back around, mister and/or miss, if their progeny doesn’t quit incessantly screeching the damn thing from the back seat.

I have a real whistle, a big plastic neon orange one strapped to my flotation vest that I use when I’m boating, with which it’s highly advisable to stick your fingers in both ears before blowing it. It’s probably audible from the moon. The one that came with this ain’t it.

The ballistic nylon sheath of course contains two little dedicated pockets, one each for the ferro rod and the whistle. Since I haven’t got the latter anymore I cast about for some other suitable survival article to put there, practically any of which you can think of would be more useful.

Ah, there we are. Some field rations will do.

The Survivor’s sheath is actually rather ghastly. It’s all Velcro panels and fold-overs, and while Dajo claim it can be worn either vertically or horizontally, you can only do the former if you really have an unrealistically thin belt. It really seems to be designed with horizontal scout carry in mind. Among its various shortcomings is the lack of a stiffening insert, instead just having a couple of panels of faux-leather stitched to the inside instead. That means that if you do scout carry it tends to develop a curvature when it’s empty that makes reinserting the knife even more of a delicate affair than it already would be. That’s because if you keep the knife even moderately sharp it’ll be prone to start slicing through the throat of its own sheath, noodle quotient or not, since it’s just bare fabric there. Retention is by way of a horrible Velcro strap that wraps around the handle and is forever in the way, as these things tend to go.

The Survivor’s handle is highly skeletonized and is comprised of a pair of G-10 slabs riveted over the tang. Dajo claim that this makes it ideal for lashing to a stick with the included cord to produce a makeshift spear, which is an activity that no sane individual has ever done; If you’re already holding a stout enough stick and a knife, the obvious and much less stupid answer is to just sharpen your stick into a point. You know, one which you won’t care if you drive it full on into a rock because you’ve failed to account for water’s refraction and therefore missed the fish you were aiming for by a full six inches.

The survivor comes from a time when nobody had heard of 7cr steel, really, and we thought all those letters and numbers in it must have made it exotic and therefore obviously good. Right? Little did we know until later that it’s basically the Chinese equivalent to 440A, an alloy that was already not terribly exciting in 2006. It’s a good fit for something like this, I suppose, being a reasonably tough and extremely corrosion resistant steel suitable for careless use and storage. You could probably jigger a way to keep a tiny sharpening stone in the Survivor’s sheath somehow, and if you did it’d give you something to do every night in camp since its edge retention is thoroughly unexciting.

The knife’s only other marking is the Dajo logo laser marked on the front.

The Inevitable Conclusion

Job number one for the Survivor is probably to press a Kydex sheath for it. Dajo seem to have come to this conclusion themselves, because that’s exactly what they’ve done with the latest version of it. I’m sure that’s very nice and all, but it lacks sufficient kitsch.

For its time this was probably a revelation as compared to what we were already used to with “survival” knives, which were those ubiquitous Rambo lookin’ things with their hollow aluminum handles for storing your matches in but nothing resembling a tang. This Dajo, then, must have seemed like a whole new dawn. It’s fresh, it’s elegant, it’s minimal. Svelte, even. And it’s all one piece so it probably won’t snap right off at the handle. Although, now that we’re on the topic you probably shouldn’t try too much batoning with it what with that big slot cut in the blade.

But then, absolutely everything interesting there is to say about the Survivor is already immediately apparent as soon as you look at it. It looks interesting, yes. That’s all it’s got. You hope owning it will make you seem interesting, too, when people see you playing around with it around the campfire.

But it won’t. You’ll have manage that part by yourself.

So hey, did I ever tell you about that time I bought this knife…?


^1^ I stole this image from Knifecenter, by the way. Apparently they managed not to lose their whistle prior to photography.

0

Humboldt Redeux

preview

Status update:

I was going to do the photography for an actual knife post today. That will have to wait, because my memory card literally disintegrated inside my camera. This has caused me some difficulty.

In the meantime, here are some pictures I took earlier.

You remember how earlier I said I was not best pleased with the steel stock I sourced to make my latest Humboldts out of? Well, in retrospect I decided this did not quite sufficiently represent the brand and that honked me off so much that the other day I dismounted both of them and faced them off, despite not actually owning a surface grinder at the moment. Then I finished them off with a bout on my surface conditioning belts, leaving them with a nice satiny sheen all over.

This whole process what slightly more arduous than I predicted at the outset.

Nevertheless it is done, and I feel significantly better about releasing these into the wild now. It’s still not perfect, but it’ll do.

A side effect of this was grinding the markings off of these, so I redid them in my newer style while I was at it. The logos are engraved differently now, too (same methodology as my latest batch of Macaronis) and much shinier:

Those of you already following along today might also know that I took it upon myself to develop some custom tooling: Thick steel, ludicrous degree of sharpening, for the express purpose thereof.

Phowar.

This is for my trusty Ruixin RX-009 jig which I still have not worked up the wherewithal to thoroughly review in this space despite threatening to probably four or five times by now. Not least of which because it is not a particularly wieldy object to cleanly photograph. I am now pleased to inform you that not just my small knives shall be shipped to their new owners fantastically sharp, but now all the big ones will too.

More to follow. Dork, out.

Status update:

I was going to do the photography for an actual knife post today. That will have to wait, because my memory card literally disintegrated inside my camera. This has caused me some difficulty.

In the meantime, here are some pictures I took earlier.

You remember how earlier I said I was not best pleased with the steel stock I sourced to make my latest Humboldts out of? Well, in retrospect I decided this did not quite sufficiently represent the brand and that honked me off so much that the other day I dismounted both of them and faced them off, despite not actually owning a surface grinder at the moment. Then I finished them off with a bout on my surface conditioning belts, leaving them with a nice satiny sheen all over.

This whole process what slightly more arduous than I predicted at the outset.

Nevertheless it is done, and I feel significantly better about releasing these into the wild now. It’s still not perfect, but it’ll do.

A side effect of this was grinding the markings off of these, so I redid them in my newer style while I was at it. The logos are engraved differently now, too (same methodology as my latest batch of Macaronis) and much shinier:

Those of you already following along today might also know that I took it upon myself to develop some custom tooling: Thick steel, ludicrous degree of sharpening, for the express purpose thereof.

Phowar.

This is for my trusty Ruixin RX-009 jig which I still have not worked up the wherewithal to thoroughly review in this space despite threatening to probably four or five times by now. Not least of which because it is not a particularly wieldy object to cleanly photograph. I am now pleased to inform you that not just my small knives shall be shipped to their new owners fantastically sharp, but now all the big ones will too.

More to follow. Dork, out.

0

Hey, Macaroni

preview

If you are of the correct age that I’ve once again gotten that damn song stuck in your head, I apologize. But only a little bit.

This is an obligatory advertisement reminding you that I’ve finally gotten off my duff and completed a handful of Macaronis in both Mini and Maxi variants. These proved to be pretty popular last time around, and if you missed it now here’s another chance.

Oh, and one more thing: These are now in CPM154 rather than D2. That’s right: Stainless!

As is apparently becoming tradition, I posted these and one of them is sold instantly. But I have two Minis and two Maxis left, although I haven’t completed the sheath for the second Maxi and thus I haven’t bothered to do its photography yet. Its handle is blue. But, if you have a custom color preference please do let me know. I can print a handle in any old color, or at least any old color I happen to have material for: Black, green, blue, orange, red, white, pink, purple, yellow, and teal.

I also have one King-S left in D2, and both Humbolts. Actually, remember when last time I remarked I wasn’t best pleased with the surface finish of that batch of steel? This actually honked me off so much that I dismounted both of them, ground them flat, re-polished, and re-engraved them. I haven’t updated the photography on that yet, either. I’ll get to it.

Anyway, git you one.

If you are of the correct age that I’ve once again gotten that damn song stuck in your head, I apologize. But only a little bit.

This is an obligatory advertisement reminding you that I’ve finally gotten off my duff and completed a handful of Macaronis in both Mini and Maxi variants. These proved to be pretty popular last time around, and if you missed it now here’s another chance.

Oh, and one more thing: These are now in CPM154 rather than D2. That’s right: Stainless!

As is apparently becoming tradition, I posted these and one of them is sold instantly. But I have two Minis and two Maxis left, although I haven’t completed the sheath for the second Maxi and thus I haven’t bothered to do its photography yet. Its handle is blue. But, if you have a custom color preference please do let me know. I can print a handle in any old color, or at least any old color I happen to have material for: Black, green, blue, orange, red, white, pink, purple, yellow, and teal.

I also have one King-S left in D2, and both Humbolts. Actually, remember when last time I remarked I wasn’t best pleased with the surface finish of that batch of steel? This actually honked me off so much that I dismounted both of them, ground them flat, re-polished, and re-engraved them. I haven’t updated the photography on that yet, either. I’ll get to it.

Anyway, git you one.

0

My trench knife, Artyom's from the game Metro 2033

preview

I did it by eye. I made it from the outer ring of a bearing (which is why my blade is 5 mm thick). I cut it in half, heated up one half, and forged it into a straight flat bar. Then I cut out the shape using an angle grinder (the teeth on the spine of the blade and fitted the shape for the handle) and sharpened the blade on a bench grinder. I made the holes in the blade using a drill press.

I did it by eye. I made it from the outer ring of a bearing (which is why my blade is 5 mm thick). I cut it in half, heated up one half, and forged it into a straight flat bar. Then I cut out the shape using an angle grinder (the teeth on the spine of the blade and fitted the shape for the handle) and sharpened the blade on a bench grinder. I made the holes in the blade using a drill press.

0

Weird Knife Wednesday: Mil-Tec M2000 "German" "Army" Knife

preview

Here we go. Surely, you say, I’ve finally lost the plot. When somebody says “pocketknife,” hell, when you look up pocketknife in the dictionary, the image you get is pretty much exactly this. How, in the name of all of ye gods, could the highly memorably named Mil-Tec M2000 possibly be all that weird?

Obviously, this is the other knife I picked up at my foray to the military surplus store as I recounted to you last week. A second glance reveals that this is new “military styled” manufacture and not genuine surplus, but it was certainly cheap enough and its deceptively dark OD coloration (which is such that it looks black under poor light) was beckoning in my direction. So I added it to the pile.

As it happens an all black version is also available, but that variant also comes with black coated blades and hardware and we all know my opinion on that kind of thing. As the owner of a wide and ever-expanding array of exciting metalworking apparatuses, I am of course eminently capable of repolishing a bare steel blade should the need ever arise. Painted ones, however, are considerably more annoying.

But trying to identify just what I was holding simply by peering at it wasn’t getting me anywhere. The “Mil-Tec®” marking on the heel of the main blade is the only one on it, and it notably lacks any type of issue number, serial, or item designation. And it’s just laser marked rather than engraved so that pretty thoroughly rules out any type of authentic milspec manufacture.

The other thing, of course, is how it’s rocking this prominent Bundeswehr logo which is kind of tough to ignore. Or miss, for that matter.

Once again I didn’t have the box, so my only recourse was going home and stuffing myself down the Internet Knife Research Rabbit Hole, and only after I’d already swiped my credit card. Just figuring out what the heck the model designation was for this thing was an adventure enough. Once I did I discovered that these are readily available from the usual array of online punters just as you’d expect, and also that I’d overpaid for this by about $2. Oh well; It was worth it for the novelty alone.

The M2000 is a chimera. Yes, it’s trying quite hard to look like the 2003 facelift of the “GAK” Bundeswehr pocketknife, in particular the latter “OH GAK” one handed opener although prominently missing the one handed component. All of the above is a derivative (or vise versa) of the Victorinox Trekker, and this completely copies the latter’s tool set verbatim. But again it’s minus the thumb opening hole, and also lacking the 2/3 “wavy” serrated edge. Thank goodness.

Whether or not its model designation is deliberately to evoke the KM2000 German combat knife in order to underhandedly inflate its implied military association is a mystery, but it’s as sound a theory as any.

The history of knock-off Swiss Army (albeit in this case one degree removed) knives is, of course, if not exactly storied then certainly still very long. As that kind of thing goes this is actually a suspiciously competent one. Sure, we have no idea what kind of steel it’s made out of and they didn’t even have the good graces to mark on it that it’s made in China, even though it most certainly is. And Mil-Tec themselves don’t seem to have any kind of real web presence that isn’t just a bunch of resellers and AI written blogspam affiliate stores, so there isn’t much to research there. Do you know, I have a hunch they don’t actually have anything to do with Sturm Mil-Tec of Germany. They might be fervently wishing you thought they did.

A lot of replica military-ish stuff seems to exist under the Mil-Tec brand regardless of whatever capacity in which the stuff is produced or by who. Thus, I also thought it was appropriate to find something military-ish to do with it. I hereby present to you this field report:

[I ate] …An MRE

I must admit I might let my sense of nostalgia overtake me and that led me to buy an MRE. To be fair, this one claimed to be a slice of pizza, which is not a variety I’ve seen before in all my years and this intrigued me mightily. And now that I’ve said that a dozen people will pop up in the comments and tell me how it’s now the most common kind and I’m just hopelessly out of the loop.

I concluded this would either be spectacular or just spectacularly awful, and either way it would be a good time that’s well worth the $6. So I stuffed it in my panniers along with all my other loot and rode off with it to camp that evening.

For the three of you left on the planet who are unaware, MRE stands for “meal, ready to eat” and is the current standard-ish field ration of the US military. Since every single damn fool thing procured by the US military is at the end of the day manufactured by the private sector, these things inevitably also became available to the general public for all and sundry, e.g. the various survivalist prepper types and/or those who like to play soldier.

Each one is a little vacuum packed shelf-stable smorgasbord of various odds and ends consisting of much more than the main menu item listed on the front. If you’ve never had the unique pleasure of dealing with one of these, every single component is also individually packaged in a plastic pouch and the complete consumption of one produces a prodigious amount of trash you then have to figure out what to do with. My current theory as to why this is the case is because these are produced in America. This goes some way towards explaining why they’re not as popular with the backpacking crowd as you’d think.

Most of these pouches have what appear to the uninitiated to be tear notches so you’d be able to open them without tools. This is false hope. They never bloody work, so you have to cut everything open with your knife or a pair of scissors anyway. Naturally this gave my little Mil-Tec knife plenty to do.

Actually, while we’re on that topic, little is one thing that the M2000 isn’t.

It’s near enough the same size as the Victorinox Trekker (lately renamed to the Trailfinder) that serves as its template. As far as I can tell, anyway, what with not owning the genuine article. The Mil-Tec version is 4-1/4" long when closed (107.95mm) and about 7-1/2" (190.5mm) with its knife blade open. The blade is about 3-1/4" long (82.55mm). That puts it firmly in the full size class, especially compared to the titchy little Swiss Classics that are what most people think of when they think Swiss Army Knife, as pictured above. It’s 4.83 ounces or 136.9 grams, and decidedly chunky at 0.787" (19.99mm) thick across its scales.

Said scales are injection moulded out of what I assume to be FRN but may turn out just to be ABS, and the sound you get from scratching on them reveals them to be hollow. That part is certainly authentic, at any rate. And sacrilegious as it may sound, I actually like how they feel better than most real Victorinox knives I’ve handled.

The M2000’s blade is quite acceptably sharp from the factory, which is a good thing for me because I did not pack any sharpening equipment on my camping trip. And, believe it or not, I usually don’t. It had no trouble shucking all of my MRE’s contents.

Any MRE that contains an entree (using the term as loosely as possible) that’s meant to be eaten warm will also include a flameless ration heater, which is a porous baggie — picture one of those instant glove warmer things — filled with iron and magnesium powder that when exposed to water gets piping hot. These can famously be put to other uses as well, as enlisted men anywhere who have a ringing in their ears and a cold dinner will happily tell you. Its efficacy for actually heating your food is highly variable, and I found that my pizza slice was so thick it was rather a hassle to fit into the included heater pouch without folding it up like a taco. Nevertheless I did so anyway and dutifully filled it up with some creek water right out of my filter, leaning it against a Rock Or Something to percolate for a while.

Swiss Army knives are notorious for having stiff actions that tend to require the user to either have stout fingernails or pack along a separate tool for opening your tool to get the blasted things to cooperate. Their knockoffs are no exception and the M2000 certainly isn’t, either. Putting mine away after this I thought the main blade in particular was singularly difficult to close until the light bulb finally managed its feeble glow above my head and I realized part of what’s odd about the M2000.

Unusual but not unique among these sorts of things, the main blade here is actually a liner locker. I realized belatedly that I should not be surprised, since the current versions of several of the larger Victorinox knives work exactly the same way. But sitting there in front of the fire in my camp chair and with no cell service to research things, I hadn’t twigged to this being so near a clone to one of those just yet.

Curiously the liner also pushes to the right to unlock, which is opposite the usual way. This makes the M2000 and indeed the various Victorinox models from which its lineage tenuously derives inherently lefty friendly, which is pretty uncommon. Especially in a liner locker, at least aside from the various special order left handed versions of Spyderco knives and so forth. So there’s a piece of trivia that’ll make you a real hit at parties.

I was initially worried about what cramming my slice of pizza into that heater pouch would do to it. It turns out my concern was unfounded, as the slice in question appears to be made out of a dishwashing sponge; the texture and consistency is about the same, and the cheese on top has apparently been affixed with some manner of industrial welding process. The dining experience is exactly that of a Totino’s or Ellio’s frozen brick pizza that somebody’s microwaved far too long and then left out in the rain.

My MRE heater also didn’t do a very good job of warming it up. I ate it anyway. I’ve had worse.

The rest of the package included a quartet of Saltine style crackers which are pre-shattered for the user’s convenience, a ketchup packet that is actually full of peanut butter (presumably intended to be used on the same, but good luck with that), a single serving tube of I Can’t Believe It’s Not Gatorade, a truly microscopic packet of crushed red peppers for the pizza, a squeeze pouch of apple sauce which actually wasn’t too bad, a pouch of jalepeno dusted cashews which was entirely too small, and a “chocolate flavor” “nutritious” energy bar with a suspicious but somehow strangely enjoyable texture. I did not receive the customary tiny bottle of Tabasco sauce with this one, alas. The accessories baggie contains the usual largely useless napkin, one sugar and one Splenda packet — brand name, no less — a hand wipe, a single serving of instant coffee, a packet of not enough non-dairy creamer to put in said coffee, and two tiny squares of chewing gum. And a spoon.

And A Spoon

The M2000 does not, in fact, contain a spoon. Contrary to most of these types of things it also doesn’t have a corkscrew. I was all set to be miffed about this, until I experienced the moment of clarity that enlightened me thus: I have never, ever needed to open a bottle of wine in the woods and I never will. And even if somehow the need arose, I’m sure I don’t need to tell you there are about sixty three ways to uncork a wine bottle without a proper corkscrew and any garden variety pocketknife will contain at least one of them.

It seems that no matter what set of tools show up on any pocketknife, some portion of the world’s population will unerringly show up demanding something else. For what it’s worth the M2000 has the usual knife blade, both a hooked can opener and a separate bottle opener (both of which terminate in screwdriver tips and the latter of which also has a wire stripping notch), and a saw which is very definitely not a fish scaler but is likely to be used as such.

On the rear there’s one stubby Philips screwdriver and one pokey reamer/awl thingy which curiosuly does not include the customary hole, and nevertheless has never been used by anyone for any specific purpose, whatever its intended purpose may be.

It doesn’t have a toothpick or tweezers. You’re on your own for those. That, or pony up seventy bucks for a Victorinox. It hasn’t got a keyring attachment point, either.

The liner lock mechanism also extends to the bottle opener and serves to lock that open, too. I personally might have preferred that the can opener be the other locking tool, but the larger of the two slotted screwdriver tips is on that end so that was probably the rationale.

All in all that’s a pretty versatile set of tools that could be put to a decent array of uses you might find in the field. Especially so if you were willing to abuse several of the built in tools to do things that they probably shouldn’t, but nevertheless soldiers inevitably will.

The Inevitable Conclusion

I like the M2000 in a twisted yet not entirely ironic way. I’ve handled a lot of Swiss Army knockoffs in my life and broken almost as many of them. This one seems pretty well built and even manages to feel nice in the hand.

I consider it a much better investment than that MRE was. And the best part is, it didn’t even cost me that much more. Unlike its inspiration, it was significantly less than $70. We could all use a spare knife to throw in the tank bag or the glove box or the rucksack. Why not this one? It handily solves the #1 problem with a Swiss Army knife, namely the snapping shut on your fingers bit. And it’s green, and it’s got a cool eagle on it.

So, sure. What the hell.

Here we go. Surely, you say, I’ve finally lost the plot. When somebody says “pocketknife,” hell, when you look up pocketknife in the dictionary, the image you get is pretty much exactly this. How, in the name of all of ye gods, could the highly memorably named Mil-Tec M2000 possibly be all that weird?

Obviously, this is the other knife I picked up at my foray to the military surplus store as I recounted to you last week. A second glance reveals that this is new “military styled” manufacture and not genuine surplus, but it was certainly cheap enough and its deceptively dark OD coloration (which is such that it looks black under poor light) was beckoning in my direction. So I added it to the pile.

As it happens an all black version is also available, but that variant also comes with black coated blades and hardware and we all know my opinion on that kind of thing. As the owner of a wide and ever-expanding array of exciting metalworking apparatuses, I am of course eminently capable of repolishing a bare steel blade should the need ever arise. Painted ones, however, are considerably more annoying.

But trying to identify just what I was holding simply by peering at it wasn’t getting me anywhere. The “Mil-Tec®” marking on the heel of the main blade is the only one on it, and it notably lacks any type of issue number, serial, or item designation. And it’s just laser marked rather than engraved so that pretty thoroughly rules out any type of authentic milspec manufacture.

The other thing, of course, is how it’s rocking this prominent Bundeswehr logo which is kind of tough to ignore. Or miss, for that matter.

Once again I didn’t have the box, so my only recourse was going home and stuffing myself down the Internet Knife Research Rabbit Hole, and only after I’d already swiped my credit card. Just figuring out what the heck the model designation was for this thing was an adventure enough. Once I did I discovered that these are readily available from the usual array of online punters just as you’d expect, and also that I’d overpaid for this by about $2. Oh well; It was worth it for the novelty alone.

The M2000 is a chimera. Yes, it’s trying quite hard to look like the 2003 facelift of the “GAK” Bundeswehr pocketknife, in particular the latter “OH GAK” one handed opener although prominently missing the one handed component. All of the above is a derivative (or vise versa) of the Victorinox Trekker, and this completely copies the latter’s tool set verbatim. But again it’s minus the thumb opening hole, and also lacking the 2/3 “wavy” serrated edge. Thank goodness.

Whether or not its model designation is deliberately to evoke the KM2000 German combat knife in order to underhandedly inflate its implied military association is a mystery, but it’s as sound a theory as any.

The history of knock-off Swiss Army (albeit in this case one degree removed) knives is, of course, if not exactly storied then certainly still very long. As that kind of thing goes this is actually a suspiciously competent one. Sure, we have no idea what kind of steel it’s made out of and they didn’t even have the good graces to mark on it that it’s made in China, even though it most certainly is. And Mil-Tec themselves don’t seem to have any kind of real web presence that isn’t just a bunch of resellers and AI written blogspam affiliate stores, so there isn’t much to research there. Do you know, I have a hunch they don’t actually have anything to do with Sturm Mil-Tec of Germany. They might be fervently wishing you thought they did.

A lot of replica military-ish stuff seems to exist under the Mil-Tec brand regardless of whatever capacity in which the stuff is produced or by who. Thus, I also thought it was appropriate to find something military-ish to do with it. I hereby present to you this field report:

[I ate] …An MRE

I must admit I might let my sense of nostalgia overtake me and that led me to buy an MRE. To be fair, this one claimed to be a slice of pizza, which is not a variety I’ve seen before in all my years and this intrigued me mightily. And now that I’ve said that a dozen people will pop up in the comments and tell me how it’s now the most common kind and I’m just hopelessly out of the loop.

I concluded this would either be spectacular or just spectacularly awful, and either way it would be a good time that’s well worth the $6. So I stuffed it in my panniers along with all my other loot and rode off with it to camp that evening.

For the three of you left on the planet who are unaware, MRE stands for “meal, ready to eat” and is the current standard-ish field ration of the US military. Since every single damn fool thing procured by the US military is at the end of the day manufactured by the private sector, these things inevitably also became available to the general public for all and sundry, e.g. the various survivalist prepper types and/or those who like to play soldier.

Each one is a little vacuum packed shelf-stable smorgasbord of various odds and ends consisting of much more than the main menu item listed on the front. If you’ve never had the unique pleasure of dealing with one of these, every single component is also individually packaged in a plastic pouch and the complete consumption of one produces a prodigious amount of trash you then have to figure out what to do with. My current theory as to why this is the case is because these are produced in America. This goes some way towards explaining why they’re not as popular with the backpacking crowd as you’d think.

Most of these pouches have what appear to the uninitiated to be tear notches so you’d be able to open them without tools. This is false hope. They never bloody work, so you have to cut everything open with your knife or a pair of scissors anyway. Naturally this gave my little Mil-Tec knife plenty to do.

Actually, while we’re on that topic, little is one thing that the M2000 isn’t.

It’s near enough the same size as the Victorinox Trekker (lately renamed to the Trailfinder) that serves as its template. As far as I can tell, anyway, what with not owning the genuine article. The Mil-Tec version is 4-1/4" long when closed (107.95mm) and about 7-1/2" (190.5mm) with its knife blade open. The blade is about 3-1/4" long (82.55mm). That puts it firmly in the full size class, especially compared to the titchy little Swiss Classics that are what most people think of when they think Swiss Army Knife, as pictured above. It’s 4.83 ounces or 136.9 grams, and decidedly chunky at 0.787" (19.99mm) thick across its scales.

Said scales are injection moulded out of what I assume to be FRN but may turn out just to be ABS, and the sound you get from scratching on them reveals them to be hollow. That part is certainly authentic, at any rate. And sacrilegious as it may sound, I actually like how they feel better than most real Victorinox knives I’ve handled.

The M2000’s blade is quite acceptably sharp from the factory, which is a good thing for me because I did not pack any sharpening equipment on my camping trip. And, believe it or not, I usually don’t. It had no trouble shucking all of my MRE’s contents.

Any MRE that contains an entree (using the term as loosely as possible) that’s meant to be eaten warm will also include a flameless ration heater, which is a porous baggie — picture one of those instant glove warmer things — filled with iron and magnesium powder that when exposed to water gets piping hot. These can famously be put to other uses as well, as enlisted men anywhere who have a ringing in their ears and a cold dinner will happily tell you. Its efficacy for actually heating your food is highly variable, and I found that my pizza slice was so thick it was rather a hassle to fit into the included heater pouch without folding it up like a taco. Nevertheless I did so anyway and dutifully filled it up with some creek water right out of my filter, leaning it against a Rock Or Something to percolate for a while.

Swiss Army knives are notorious for having stiff actions that tend to require the user to either have stout fingernails or pack along a separate tool for opening your tool to get the blasted things to cooperate. Their knockoffs are no exception and the M2000 certainly isn’t, either. Putting mine away after this I thought the main blade in particular was singularly difficult to close until the light bulb finally managed its feeble glow above my head and I realized part of what’s odd about the M2000.

Unusual but not unique among these sorts of things, the main blade here is actually a liner locker. I realized belatedly that I should not be surprised, since the current versions of several of the larger Victorinox knives work exactly the same way. But sitting there in front of the fire in my camp chair and with no cell service to research things, I hadn’t twigged to this being so near a clone to one of those just yet.

Curiously the liner also pushes to the right to unlock, which is opposite the usual way. This makes the M2000 and indeed the various Victorinox models from which its lineage tenuously derives inherently lefty friendly, which is pretty uncommon. Especially in a liner locker, at least aside from the various special order left handed versions of Spyderco knives and so forth. So there’s a piece of trivia that’ll make you a real hit at parties.

I was initially worried about what cramming my slice of pizza into that heater pouch would do to it. It turns out my concern was unfounded, as the slice in question appears to be made out of a dishwashing sponge; the texture and consistency is about the same, and the cheese on top has apparently been affixed with some manner of industrial welding process. The dining experience is exactly that of a Totino’s or Ellio’s frozen brick pizza that somebody’s microwaved far too long and then left out in the rain.

My MRE heater also didn’t do a very good job of warming it up. I ate it anyway. I’ve had worse.

The rest of the package included a quartet of Saltine style crackers which are pre-shattered for the user’s convenience, a ketchup packet that is actually full of peanut butter (presumably intended to be used on the same, but good luck with that), a single serving tube of I Can’t Believe It’s Not Gatorade, a truly microscopic packet of crushed red peppers for the pizza, a squeeze pouch of apple sauce which actually wasn’t too bad, a pouch of jalepeno dusted cashews which was entirely too small, and a “chocolate flavor” “nutritious” energy bar with a suspicious but somehow strangely enjoyable texture. I did not receive the customary tiny bottle of Tabasco sauce with this one, alas. The accessories baggie contains the usual largely useless napkin, one sugar and one Splenda packet — brand name, no less — a hand wipe, a single serving of instant coffee, a packet of not enough non-dairy creamer to put in said coffee, and two tiny squares of chewing gum. And a spoon.

And A Spoon

The M2000 does not, in fact, contain a spoon. Contrary to most of these types of things it also doesn’t have a corkscrew. I was all set to be miffed about this, until I experienced the moment of clarity that enlightened me thus: I have never, ever needed to open a bottle of wine in the woods and I never will. And even if somehow the need arose, I’m sure I don’t need to tell you there are about sixty three ways to uncork a wine bottle without a proper corkscrew and any garden variety pocketknife will contain at least one of them.

It seems that no matter what set of tools show up on any pocketknife, some portion of the world’s population will unerringly show up demanding something else. For what it’s worth the M2000 has the usual knife blade, both a hooked can opener and a separate bottle opener (both of which terminate in screwdriver tips and the latter of which also has a wire stripping notch), and a saw which is very definitely not a fish scaler but is likely to be used as such.

On the rear there’s one stubby Philips screwdriver and one pokey reamer/awl thingy which curiosuly does not include the customary hole, and nevertheless has never been used by anyone for any specific purpose, whatever its intended purpose may be.

It doesn’t have a toothpick or tweezers. You’re on your own for those. That, or pony up seventy bucks for a Victorinox. It hasn’t got a keyring attachment point, either.

The liner lock mechanism also extends to the bottle opener and serves to lock that open, too. I personally might have preferred that the can opener be the other locking tool, but the larger of the two slotted screwdriver tips is on that end so that was probably the rationale.

All in all that’s a pretty versatile set of tools that could be put to a decent array of uses you might find in the field. Especially so if you were willing to abuse several of the built in tools to do things that they probably shouldn’t, but nevertheless soldiers inevitably will.

The Inevitable Conclusion

I like the M2000 in a twisted yet not entirely ironic way. I’ve handled a lot of Swiss Army knockoffs in my life and broken almost as many of them. This one seems pretty well built and even manages to feel nice in the hand.

I consider it a much better investment than that MRE was. And the best part is, it didn’t even cost me that much more. Unlike its inspiration, it was significantly less than $70. We could all use a spare knife to throw in the tank bag or the glove box or the rucksack. Why not this one? It handily solves the #1 problem with a Swiss Army knife, namely the snapping shut on your fingers bit. And it’s green, and it’s got a cool eagle on it.

So, sure. What the hell.

0

Getting That Chip Off My Shoulder

preview

You know, we’ve been on the topic of knife abuse lately. Well, when I was looking at things in the process of my usual jumping-on-the-bandwagon I noticed this and mentioned it at the time. I guess in my household this is what counts as “abuse.”

I’m the only person who uses this particular knife, so my default I suppose I’m guilty of this, however it happened. I honestly have no idea. I don’t recall using it to whack anything particularly unwise.

Anyhoo, this is a cheap Cuisinart branded santoku I bought from Big Lots ages ago. It’s objectively not a very nice knife, but I still kind of like it and it’s been my main kitchen knife forever. I’m positive at the time I bought it for the obvious Space Balls gag. Lately I was experimenting at keeping it at 10° or 12° per side or something, I don’t remember which, and that was obviously rather naively optimistic for whatever mystery steel this thing is made out of. That may have contributed to how easily that bite that got taken out of the edge, there.

Well, we can’t let that stand so I finally got around to cleaning it up yesterday. I was putting it off because unpacking my Ruixin jig from its little travel case and putting it together probably took longer than the process of actually sharpening it, including the time spent lashing the chip out with my coarsest 80 grit stone.

Other than the chiped part the old edge, which I suppose is now the backbevel, was still pretty clean.

That’s because I chickened out and reprofiled this back to 15° per side. And I could only be bothered to go down to my 1500 grit stone and didn’t obsessively mirror polish it all the way down to the point of using my finest 20,000 grit stone on it because A) I honestly cannot be arsed, and B) that’s surely putting pearls before swine anyhow.

I did give it a quick rub on the strop, though, just to feel fancy. (The texture in the background there is that of a piece of plain white printer paper. That edge is probably more than fine enough for cooking duty, and possesses sufficient sharpness at least in the near term that the only thing preventing me from using it to e.g. chop a bus in half like some kind of anime samurai is the lack of blade length. That, and the fact that I’d inevitably have to sharpen it again afterwards.)

With any luck that’ll render it durable enough to last another year or so in the kitchen, or at least until I can be bothered to look at it again.

You know, we’ve been on the topic of knife abuse lately. Well, when I was looking at things in the process of my usual jumping-on-the-bandwagon I noticed this and mentioned it at the time. I guess in my household this is what counts as “abuse.”

I’m the only person who uses this particular knife, so my default I suppose I’m guilty of this, however it happened. I honestly have no idea. I don’t recall using it to whack anything particularly unwise.

Anyhoo, this is a cheap Cuisinart branded santoku I bought from Big Lots ages ago. It’s objectively not a very nice knife, but I still kind of like it and it’s been my main kitchen knife forever. I’m positive at the time I bought it for the obvious Space Balls gag. Lately I was experimenting at keeping it at 10° or 12° per side or something, I don’t remember which, and that was obviously rather naively optimistic for whatever mystery steel this thing is made out of. That may have contributed to how easily that bite that got taken out of the edge, there.

Well, we can’t let that stand so I finally got around to cleaning it up yesterday. I was putting it off because unpacking my Ruixin jig from its little travel case and putting it together probably took longer than the process of actually sharpening it, including the time spent lashing the chip out with my coarsest 80 grit stone.

Other than the chiped part the old edge, which I suppose is now the backbevel, was still pretty clean.

That’s because I chickened out and reprofiled this back to 15° per side. And I could only be bothered to go down to my 1500 grit stone and didn’t obsessively mirror polish it all the way down to the point of using my finest 20,000 grit stone on it because A) I honestly cannot be arsed, and B) that’s surely putting pearls before swine anyhow.

I did give it a quick rub on the strop, though, just to feel fancy. (The texture in the background there is that of a piece of plain white printer paper. That edge is probably more than fine enough for cooking duty, and possesses sufficient sharpness at least in the near term that the only thing preventing me from using it to e.g. chop a bus in half like some kind of anime samurai is the lack of blade length. That, and the fact that I’d inevitably have to sharpen it again afterwards.)

With any luck that’ll render it durable enough to last another year or so in the kitchen, or at least until I can be bothered to look at it again.

0

Knife Abuse, Part 3: Healing and Reconciliation

Photos from multiple angles of a 5" Stainless Steel Santoku Knife With a Rough,  Dull Edge from Oversharpening With A Cheap Pull Through Sharpening Tool
preview

Knifemen, knifewomen, downvoters, upvoters, it’s time to update you on the salvation of this kitchen knife. Mr. McKay, based knife sharpener, did the best he could do to restore the edge to something like symmetry. I expected a salty comment or two on the topic when I picked it up, however, he did not offer any, only a pitying silence as he gave me a meticulously handwritten receipt. Yet, his silence was full of kindness. Cost: $4.00 USD Many have asked, how did I achieve the ragged edge seen in my previous post? I wish I had a better answer for you, except that I used a shitty Coghlan’s sharpener that was probably full of metal filings and dirt. That one is going in the trash. Any suggestions for buying a beginner’s sharpener for $30.00 or $40.00 ? I don’t know how to use a file or a stone.

Knifemen, knifewomen, downvoters, upvoters, it’s time to update you on the salvation of this kitchen knife. Mr. McKay, based knife sharpener, did the best he could do to restore the edge to something like symmetry. I expected a salty comment or two on the topic when I picked it up, however, he did not offer any, only a pitying silence as he gave me a meticulously handwritten receipt. Yet, his silence was full of kindness. Cost: $4.00 USD Many have asked, how did I achieve the ragged edge seen in my previous post? I wish I had a better answer for you, except that I used a shitty Coghlan’s sharpener that was probably full of metal filings and dirt. That one is going in the trash. Any suggestions for buying a beginner’s sharpener for $30.00 or $40.00 ? I don’t know how to use a file or a stone.

0

Weird Knife Wednesday: Snake Eye 300514BL

preview

Get in, losers. We’re going shopping.

My worlds get to collide here for once. Herewith I am presented with a golden opportunity to drag you along on my travels and subject you to looking at all of my vacation pictures in what up until three seconds ago you thought was a knife column. And the best part is you can’t stop me. It’s no good calling the forum cops on me, either, because around here I am the cops. How about that?

What I Did On My Summer Holidays

Hey, get back in that seat. You’re not going anywhere.

The plan was to take a leisurely ride down the MABDR. Down through Michaux and Hancock, Green Ridge, Cacapon, Baker, Moorefield, then Petersburg and off into the woods. Not the whole way, for sure. Just to get the hell out of the city for a couple of days and set up my hammock. See some stars. Read a book. Anything but put any more effort into this column, which hasn’t seen an update for three weeks. You know how it is.

My wanderings chanced to take me by the “National Soldier Factory” military surplus store just outside of Gettysburg. Yes indeed, that is worth a U-turn for me.

Truth be told I’ve ridden right by this place multiple times before, but it’s either been closed on the day I happened by or I was under the gun to make it to camp somewhere far off before sundown, so I never bothered to stop. Today, though, I had nothing but time.

I also espied this sweet Ténéré parked outside. That helped.

Anyway.

This place is a surprisingly enormous and meandering building full of lofts and alcoves. Hidden stairwells lead to yet more little cozy corners all paneled in pine and absolutely chock-a-block full of a mixture of genuine surplus hardware as well as the usual low rent knockoff tactical stuff and camping gear. Given the sheer enormity of the square footage plus the rather lethargic pace of business, at least so far as I observed while I was in there, I honestly have to wonder just how the hell they manage to make enough to keep the lights on in here. And they even have a second location right in the middle of downtown Gettysburg, a frontage which surely can’t be cheap.

All of this, of course, is deeply fascinating to the right type of highly specific dweeb.

They even have an OG looking Jeep, parked inside, in one of the basements. That must have taken some doing.

Guess what’s in the other basement.

That’s right, kids. A genuine, honest to goodness, authentic knife hell. We’re talking multiple tables worth of the absolute finest in gas station/flea market nonsense, all laid out right there for you to fiddle with. Not a single glass case in sight. There isn’t even anybody down there to supervise. I must be having one of those dreams again. Pinch me.

Plus!

Multiple tables full of crap swords. In there are not one, not two, not even three, but four of those QVC swords. Four genuine examples! Still extant in the wild! Which QVC sword? You know exactly which sword. I tell you folks, it was all I could do to resist taking one home with me except as you know I was on my motorcycle and I did the math, ultimately concluding that I didn’t want that son of a bitch anywhere near me if I crashed. (And in truth, when I was young and stupid I actually owned one of those selfsame swords. So I’ve already had the experience, and bringing home another one would require violating my subsequent “no wallhangers” household rule on swords.)

And a table full of fantasy swords. Also temping, but ultimately the same deal.

But those tables full of knives. It’s like I stepped in a time warp and went right back to those golden teenage years. This could have put me right back in my trenchcoat and combat boots, aviators, fingerless gloves, the works. No, really. I probably could have bought all of that right there and it may only have been because my panniers were full already that I did not walk out of there looking exactly like the baddest motherfucker from 1999.

You want skulls? You want wolves? You want eagles? You want marijuana leaves? It’s all here.

And rather than the $25 or $30 the usual rip-off brigade would be straight-facedly trying to pawn these off for, any of the above for a mere five bucks a piece.

Alright. You guys know the score.

The Score

I can’t walk away from a table like this without buying something.

I had to stare the spread for a while, but ultimately this thing is what spoke to me. Here is the Snake Eye 300514BL. Snake Eye is a pseudo-brand that’s crossed our path before, and this here is ultimately a chip off of much the same block. And as ever it is “Snake Eye,” singular, not “Snake Eyes,” plural, which I’m telling you right now has and will forever continue to trip me up every time I try to type it. Why are they insistent on rendering it this way? Chalk that up as another of the many things in this world I sure as hell don’t know.

As your resident balisong nerd, of course I zeroed right in on the only Balisong Shaped Object in that pile.

Except of course it isn’t. That descriptor is even more apt than usual because this is one of those thrice-damned things that’s shaped to look like balisong but is instead a regular side folder, like unto the Cold Steel Paradox and its ilk but, I suspect, a lot worse.

Look, sometimes you just have no choice but to do things purely for the love of the game.

The 300514BL is a spring assisted opener like apparently everything that Snake Eye “makes,” or is at least sold under that brand. It’s now also apparently discontinued. The proprietor of the establishment here said that the table full of knives down in the pit was a result of a buy-out from some other vendor which also included a bunch of other stuff. These were apparently not, in fact, in the category of products they actually found desirable but they were part of the lot so they wound up with them anyway. Speaking as proud purchaser of another cheap knife store’s entire closeout inventory myself, once in a bygone era many years ago, I kind of know the feeling. (It took me ages to get rid of them all. They filled a large suitcase.) This explains the fire sale prices. So if you actually want one of these for some twisted reason you’ll probably just have to journey to Gettysburg yourself. The possibilities, therefore, of my example becoming a rare and much coveted collector’s item are tantalizing, but alas probably still moot.

And let me tell you about the odyssey it was tracking down that model number. That right there was a hard earned set of eight digits, so you’re damn skippy I’m going to go through the trouble of working them into this column every chance I can.

No amount of byzantine search queries including “Snake Eye” and any combination of attachments would come up with a match for this thing. This is despite Snake Eyes’ own website taunting the reader with their current model not-balisong side folder as its headline image in all of its cheapola rainbow anodized glory. No, that one is the readily found model number AA-BBBB-C949, and I swear to you I am not making that up. The online store on their site is outright broken at the moment as well, so that’s no help. My other usual go-to for tracking down absurd Yum Cha cutlery, the Top Quest catalogs, also returned nothing in any of them. And it’s no use sticking a picture of it in a reverse image search, either, because our AI overlords consistently think this thing is a Benchmade Model 32. Which it very definitely isn’t. Trust me on that one, I’d know.

The one place it might tell you would be on the sticker on the end of the box, which I didn’t get with mine because the vast majority of these were just loose without their packaging. But, I remind you, five bucks. You can’t ask for too much.

I wasted an entire afternoon on this. Think of the sheer entertainment value, dollar-for-dollar.

But I persevered, and among the pages of highly inaccurate results I found an unbranded rendition of the thing here as well as an eBay listing for an identical looking item. Paydirt. For suitably small quantities of pay, anyway, and rather more dirt.

This just goes to show the usual problem in this area, namely that “Snake Eye,” whoever they may be, absolutely are not the outfit who actually manufacture this thing. The gods alone only know who actually does that, or where — other than somewhere in China. Somebody’s just come along and lasered their logo right through the black paint on the blade. Otherwise this is surely some manner of OEM product.

Nothing on the knife itself will help you there, either. The reverse has one of the hardest to read laser engravings in the world which simply says “China” and “440 Stainless.” Exactly what variant of 440 stainless history does not relate.

But never mind all that. Just get a load of this thing.

The 300514BL is all plastic scaled, weighing in at 113.1 grams / 3.99 ounces. It’s just under 5" long closed — 4-15/16", or possibly more accurately 125mm on the button. It’s 8-7/8" or 225mm long when open and the clip point-ish blade is 3-15/16" long or 100mm. Not all of that is usable because the root ends in a rather prominent ricasso, and even then the faux-balisong ears sticking out the sides like a hilt would prevent you from bringing the back half of the edge down onto flat surface anyway. One of those is also a flipper to kick the thing open and there’s no thumb stud. The two ears are different shapes from each other, too, for no apparent mechanical reason.

That, and a noticeable portion of the spine of the blade is left sticking out of the handles when it’s closed. If you look carefully you can see that this is because the pivot is not quite centered between the two faux handle pairs as it’s designed. It seems to be it would have been pretty trivial to make that the case, but what do I know? Me, I hardly manufacture anything.

The back side lacks the blue embellishments but makes up for it by including an honest to goodness deep carry pocket clip that’s actually quite nice despite the nicks and chips in its paint. It’s not reversible and you get tip down carry only, but it does provide a suspiciously smooth and easy draw for a knife that’s objectively crap.

The clip is also ridiculously tall.

So much so that even through the knife won’t balance on its spine because of those stupid ears, you can balance it on a flat surface at a rakish angle by using the clip. This allows me to produce frivolous bullshit like this:

Which I submit to you is now the most thorough photographic depiction of this stupid knife that has ever appeared on the Internet, and at the rate things are going ever will be, from now until the day the Earth falls into the sun. This is exactly as it is, and I didn’t even airbrush out the blemishes. You’re welcome.

Quite a bit — in fact, possibly the sum entirety — of what I respect about the 300514BL is its cheerfully nonchalant treatment of its shtick. I’m particularly appreciative of the kayfabe on display with these fake Torx heads moulded into the plastic where a real balisong would have body screws but this doesn’t.

A true Philistine, mind you, would be compelled to try to paint these silver somehow. Badly, I’m sure. I like that these have been left black instead, which shows true cheek rather than trying and inevitably failing to hold up the charade.

It’s still not a balisong. Here it is next to a knife that is:

The one thing that would really make it which it inexplicably lacks is a fake latch. That would have been rad.

I also don’t know what it says about the world that the Benchmade Model 42’s iconography is apparently the default when some turkey needs a design language to rip off wholesale, but that’s clearly what the 300514BL is going for with its pattern of holes and eyelets on its handles, there. Whenever something needs to broadcast to the world, “this is butterfly knife,” apparently the public’s monkey neurons are most reliably activated by the 42’s pattern. It’s like the world’s most nerdy type of Batesian mimicry.

Of course it’s just a regular old cheap liner locker underneath. How cheap? Well, let’s find out.

Finding Out

I put on my mystic swami hat and made several predictions about the 300514BL before even getting out my screwdrivers. Inside I expect to find a knockoff of the SpeedSafe spring assist mechanism with its highly recognizable zig-zag spring, a pair of cheap plastic pivot washers, and some metalwork that looks as if whoever made it gnawed it out of the stock using their own teeth. While wearing a blindfold.

So not only does the 300514BL use the same type of spring a the one we found in that axe thing from back when, but I’m pretty sure it’s even the same part.

The scales are a single piece design despite the gap in the middle. Strangely, all of the screws including the pivot are T7 Torx heads and not the more common T6 or T8. On my example they were all just finger tight as well, so it was dead easy to take the thing to bits despite the pivot having no anti-rotation flat and all the body screws going into round threaded barrels that aren’t otherwise held in place by anything. There was no threadlocker in evidence anywhere. I put some on the main pivot when I put it all back together and probably increased the bill of materials cost by fifteen percent.

The pivot washers are indeed plastic, and the main pivot screw is a simple round Chicago jobber. Yes, that rather alarming burr on the heel of the blade is exactly as mine was produced by the factory. One could probably improve the lockup considerably by giving this a couple of strokes with a file, if one could be bothered, but one cannot.

Here’s a surprise. The liners are solid; no speed holes whatsoever. They’re very thin, though, which is what keeps this from weighing a ton.

The 300514BL’s edginess is decent enough for five bucks. I’d be much more miffed about it for thirty. There are no evident chips or major blemishes, although my example is sharp only up to about 3/8" from the root.

The tip. S’okay? S’alright. It’ll do. Some of the blade’s cheap black finish has been worn off past the edge as part of the sharpening process, but it really takes both magnification and probably an unhealthy amount of particularity to work yourself up to caring about that too much.

Holding this straight was a challenge because, as mentioned, the 300514BL won’t stand up on its spine. But never mind my own crookedness, here. The edge isn’t true either. That’s no big surprise.

The Inevitable Conclusion

Believe it or not there was a time in my life when every knife I owned was like this. Probably for a lot of people out there every pocketknife they’ve ever owned has been like this, and they’ve never been exposed to anything much different. Although certainly not any of the regulars around here, of course, who I assume are all significantly more cultured. Well, probably.

Maybe.

Everything about this is emblematic of its price and its position. It’s outright clown shoes; pure Boffo. Even its very premise is fake, but without that it’d just be another crappy knife nobody would even care about as much as we’re doing right now. Failing that, maybe it’s still worth it every once in a while to stand where we are now and look back.

At the end of the day the 300514BL is not a knife that anyone should intentionally set out to buy. But sometimes we still just can’t resist.

Get in, losers. We’re going shopping.

My worlds get to collide here for once. Herewith I am presented with a golden opportunity to drag you along on my travels and subject you to looking at all of my vacation pictures in what up until three seconds ago you thought was a knife column. And the best part is you can’t stop me. It’s no good calling the forum cops on me, either, because around here I am the cops. How about that?

What I Did On My Summer Holidays

Hey, get back in that seat. You’re not going anywhere.

The plan was to take a leisurely ride down the MABDR. Down through Michaux and Hancock, Green Ridge, Cacapon, Baker, Moorefield, then Petersburg and off into the woods. Not the whole way, for sure. Just to get the hell out of the city for a couple of days and set up my hammock. See some stars. Read a book. Anything but put any more effort into this column, which hasn’t seen an update for three weeks. You know how it is.

My wanderings chanced to take me by the “National Soldier Factory” military surplus store just outside of Gettysburg. Yes indeed, that is worth a U-turn for me.

Truth be told I’ve ridden right by this place multiple times before, but it’s either been closed on the day I happened by or I was under the gun to make it to camp somewhere far off before sundown, so I never bothered to stop. Today, though, I had nothing but time.

I also espied this sweet Ténéré parked outside. That helped.

Anyway.

This place is a surprisingly enormous and meandering building full of lofts and alcoves. Hidden stairwells lead to yet more little cozy corners all paneled in pine and absolutely chock-a-block full of a mixture of genuine surplus hardware as well as the usual low rent knockoff tactical stuff and camping gear. Given the sheer enormity of the square footage plus the rather lethargic pace of business, at least so far as I observed while I was in there, I honestly have to wonder just how the hell they manage to make enough to keep the lights on in here. And they even have a second location right in the middle of downtown Gettysburg, a frontage which surely can’t be cheap.

All of this, of course, is deeply fascinating to the right type of highly specific dweeb.

They even have an OG looking Jeep, parked inside, in one of the basements. That must have taken some doing.

Guess what’s in the other basement.

That’s right, kids. A genuine, honest to goodness, authentic knife hell. We’re talking multiple tables worth of the absolute finest in gas station/flea market nonsense, all laid out right there for you to fiddle with. Not a single glass case in sight. There isn’t even anybody down there to supervise. I must be having one of those dreams again. Pinch me.

Plus!

Multiple tables full of crap swords. In there are not one, not two, not even three, but four of those QVC swords. Four genuine examples! Still extant in the wild! Which QVC sword? You know exactly which sword. I tell you folks, it was all I could do to resist taking one home with me except as you know I was on my motorcycle and I did the math, ultimately concluding that I didn’t want that son of a bitch anywhere near me if I crashed. (And in truth, when I was young and stupid I actually owned one of those selfsame swords. So I’ve already had the experience, and bringing home another one would require violating my subsequent “no wallhangers” household rule on swords.)

And a table full of fantasy swords. Also temping, but ultimately the same deal.

But those tables full of knives. It’s like I stepped in a time warp and went right back to those golden teenage years. This could have put me right back in my trenchcoat and combat boots, aviators, fingerless gloves, the works. No, really. I probably could have bought all of that right there and it may only have been because my panniers were full already that I did not walk out of there looking exactly like the baddest motherfucker from 1999.

You want skulls? You want wolves? You want eagles? You want marijuana leaves? It’s all here.

And rather than the $25 or $30 the usual rip-off brigade would be straight-facedly trying to pawn these off for, any of the above for a mere five bucks a piece.

Alright. You guys know the score.

The Score

I can’t walk away from a table like this without buying something.

I had to stare the spread for a while, but ultimately this thing is what spoke to me. Here is the Snake Eye 300514BL. Snake Eye is a pseudo-brand that’s crossed our path before, and this here is ultimately a chip off of much the same block. And as ever it is “Snake Eye,” singular, not “Snake Eyes,” plural, which I’m telling you right now has and will forever continue to trip me up every time I try to type it. Why are they insistent on rendering it this way? Chalk that up as another of the many things in this world I sure as hell don’t know.

As your resident balisong nerd, of course I zeroed right in on the only Balisong Shaped Object in that pile.

Except of course it isn’t. That descriptor is even more apt than usual because this is one of those thrice-damned things that’s shaped to look like balisong but is instead a regular side folder, like unto the Cold Steel Paradox and its ilk but, I suspect, a lot worse.

Look, sometimes you just have no choice but to do things purely for the love of the game.

The 300514BL is a spring assisted opener like apparently everything that Snake Eye “makes,” or is at least sold under that brand. It’s now also apparently discontinued. The proprietor of the establishment here said that the table full of knives down in the pit was a result of a buy-out from some other vendor which also included a bunch of other stuff. These were apparently not, in fact, in the category of products they actually found desirable but they were part of the lot so they wound up with them anyway. Speaking as proud purchaser of another cheap knife store’s entire closeout inventory myself, once in a bygone era many years ago, I kind of know the feeling. (It took me ages to get rid of them all. They filled a large suitcase.) This explains the fire sale prices. So if you actually want one of these for some twisted reason you’ll probably just have to journey to Gettysburg yourself. The possibilities, therefore, of my example becoming a rare and much coveted collector’s item are tantalizing, but alas probably still moot.

And let me tell you about the odyssey it was tracking down that model number. That right there was a hard earned set of eight digits, so you’re damn skippy I’m going to go through the trouble of working them into this column every chance I can.

No amount of byzantine search queries including “Snake Eye” and any combination of attachments would come up with a match for this thing. This is despite Snake Eyes’ own website taunting the reader with their current model not-balisong side folder as its headline image in all of its cheapola rainbow anodized glory. No, that one is the readily found model number AA-BBBB-C949, and I swear to you I am not making that up. The online store on their site is outright broken at the moment as well, so that’s no help. My other usual go-to for tracking down absurd Yum Cha cutlery, the Top Quest catalogs, also returned nothing in any of them. And it’s no use sticking a picture of it in a reverse image search, either, because our AI overlords consistently think this thing is a Benchmade Model 32. Which it very definitely isn’t. Trust me on that one, I’d know.

The one place it might tell you would be on the sticker on the end of the box, which I didn’t get with mine because the vast majority of these were just loose without their packaging. But, I remind you, five bucks. You can’t ask for too much.

I wasted an entire afternoon on this. Think of the sheer entertainment value, dollar-for-dollar.

But I persevered, and among the pages of highly inaccurate results I found an unbranded rendition of the thing here as well as an eBay listing for an identical looking item. Paydirt. For suitably small quantities of pay, anyway, and rather more dirt.

This just goes to show the usual problem in this area, namely that “Snake Eye,” whoever they may be, absolutely are not the outfit who actually manufacture this thing. The gods alone only know who actually does that, or where — other than somewhere in China. Somebody’s just come along and lasered their logo right through the black paint on the blade. Otherwise this is surely some manner of OEM product.

Nothing on the knife itself will help you there, either. The reverse has one of the hardest to read laser engravings in the world which simply says “China” and “440 Stainless.” Exactly what variant of 440 stainless history does not relate.

But never mind all that. Just get a load of this thing.

The 300514BL is all plastic scaled, weighing in at 113.1 grams / 3.99 ounces. It’s just under 5" long closed — 4-15/16", or possibly more accurately 125mm on the button. It’s 8-7/8" or 225mm long when open and the clip point-ish blade is 3-15/16" long or 100mm. Not all of that is usable because the root ends in a rather prominent ricasso, and even then the faux-balisong ears sticking out the sides like a hilt would prevent you from bringing the back half of the edge down onto flat surface anyway. One of those is also a flipper to kick the thing open and there’s no thumb stud. The two ears are different shapes from each other, too, for no apparent mechanical reason.

That, and a noticeable portion of the spine of the blade is left sticking out of the handles when it’s closed. If you look carefully you can see that this is because the pivot is not quite centered between the two faux handle pairs as it’s designed. It seems to be it would have been pretty trivial to make that the case, but what do I know? Me, I hardly manufacture anything.

The back side lacks the blue embellishments but makes up for it by including an honest to goodness deep carry pocket clip that’s actually quite nice despite the nicks and chips in its paint. It’s not reversible and you get tip down carry only, but it does provide a suspiciously smooth and easy draw for a knife that’s objectively crap.

The clip is also ridiculously tall.

So much so that even through the knife won’t balance on its spine because of those stupid ears, you can balance it on a flat surface at a rakish angle by using the clip. This allows me to produce frivolous bullshit like this:

Which I submit to you is now the most thorough photographic depiction of this stupid knife that has ever appeared on the Internet, and at the rate things are going ever will be, from now until the day the Earth falls into the sun. This is exactly as it is, and I didn’t even airbrush out the blemishes. You’re welcome.

Quite a bit — in fact, possibly the sum entirety — of what I respect about the 300514BL is its cheerfully nonchalant treatment of its shtick. I’m particularly appreciative of the kayfabe on display with these fake Torx heads moulded into the plastic where a real balisong would have body screws but this doesn’t.

A true Philistine, mind you, would be compelled to try to paint these silver somehow. Badly, I’m sure. I like that these have been left black instead, which shows true cheek rather than trying and inevitably failing to hold up the charade.

It’s still not a balisong. Here it is next to a knife that is:

The one thing that would really make it which it inexplicably lacks is a fake latch. That would have been rad.

I also don’t know what it says about the world that the Benchmade Model 42’s iconography is apparently the default when some turkey needs a design language to rip off wholesale, but that’s clearly what the 300514BL is going for with its pattern of holes and eyelets on its handles, there. Whenever something needs to broadcast to the world, “this is butterfly knife,” apparently the public’s monkey neurons are most reliably activated by the 42’s pattern. It’s like the world’s most nerdy type of Batesian mimicry.

Of course it’s just a regular old cheap liner locker underneath. How cheap? Well, let’s find out.

Finding Out

I put on my mystic swami hat and made several predictions about the 300514BL before even getting out my screwdrivers. Inside I expect to find a knockoff of the SpeedSafe spring assist mechanism with its highly recognizable zig-zag spring, a pair of cheap plastic pivot washers, and some metalwork that looks as if whoever made it gnawed it out of the stock using their own teeth. While wearing a blindfold.

So not only does the 300514BL use the same type of spring a the one we found in that axe thing from back when, but I’m pretty sure it’s even the same part.

The scales are a single piece design despite the gap in the middle. Strangely, all of the screws including the pivot are T7 Torx heads and not the more common T6 or T8. On my example they were all just finger tight as well, so it was dead easy to take the thing to bits despite the pivot having no anti-rotation flat and all the body screws going into round threaded barrels that aren’t otherwise held in place by anything. There was no threadlocker in evidence anywhere. I put some on the main pivot when I put it all back together and probably increased the bill of materials cost by fifteen percent.

The pivot washers are indeed plastic, and the main pivot screw is a simple round Chicago jobber. Yes, that rather alarming burr on the heel of the blade is exactly as mine was produced by the factory. One could probably improve the lockup considerably by giving this a couple of strokes with a file, if one could be bothered, but one cannot.

Here’s a surprise. The liners are solid; no speed holes whatsoever. They’re very thin, though, which is what keeps this from weighing a ton.

The 300514BL’s edginess is decent enough for five bucks. I’d be much more miffed about it for thirty. There are no evident chips or major blemishes, although my example is sharp only up to about 3/8" from the root.

The tip. S’okay? S’alright. It’ll do. Some of the blade’s cheap black finish has been worn off past the edge as part of the sharpening process, but it really takes both magnification and probably an unhealthy amount of particularity to work yourself up to caring about that too much.

Holding this straight was a challenge because, as mentioned, the 300514BL won’t stand up on its spine. But never mind my own crookedness, here. The edge isn’t true either. That’s no big surprise.

The Inevitable Conclusion

Believe it or not there was a time in my life when every knife I owned was like this. Probably for a lot of people out there every pocketknife they’ve ever owned has been like this, and they’ve never been exposed to anything much different. Although certainly not any of the regulars around here, of course, who I assume are all significantly more cultured. Well, probably.

Maybe.

Everything about this is emblematic of its price and its position. It’s outright clown shoes; pure Boffo. Even its very premise is fake, but without that it’d just be another crappy knife nobody would even care about as much as we’re doing right now. Failing that, maybe it’s still worth it every once in a while to stand where we are now and look back.

At the end of the day the 300514BL is not a knife that anyone should intentionally set out to buy. But sometimes we still just can’t resist.

0

UPDATE: Knife abuse rehab- for the blade, not for me.

preview

UPDATE: Mr. McKay will accept the knife and see about restoring the edge, I think he’s busy teaching his grandkids how to swing a machete in a tunnel. In any case, here is SOP for offering him a knife: 1.) Do not text his advertised business mobile number, it annoys him. 2.) Do not call. See Rule #1 3.) Place the knives in a tote on the McKay porch. Tag the knives with your name and number, using the tags provided. 4.) Do not call about pickup. 5.) Bring exact change in cash. Venmo is for commies.

Does anyone else have a Mr. McKay to save their knives? I feel very lucky.

UPDATE: Mr. McKay will accept the knife and see about restoring the edge, I think he’s busy teaching his grandkids how to swing a machete in a tunnel. In any case, here is SOP for offering him a knife: 1.) Do not text his advertised business mobile number, it annoys him. 2.) Do not call. See Rule #1 3.) Place the knives in a tote on the McKay porch. Tag the knives with your name and number, using the tags provided. 4.) Do not call about pickup. 5.) Bring exact change in cash. Venmo is for commies.

Does anyone else have a Mr. McKay to save their knives? I feel very lucky.

0

This isn't knife abuse, blame it on soft steel?

preview

5" santoku of “German steel”. Daily driver for 8 years. I spammed u/dualsportdork with it and now I’m spamming you. What happens when the edge reaches the little indentations? The Singularity?

5" santoku of “German steel”. Daily driver for 8 years. I spammed u/dualsportdork with it and now I’m spamming you. What happens when the edge reaches the little indentations? The Singularity?

0

Oh, I've Got a Lov-e-ly Bunch Of Coconuts

preview

And here they are a-lying in a bunch.

In case you’ve been wondering what I’ve been doing rather than shitposting about knives lately. The answer is, making knives to subsequently shitpost about. And also camping.

My store is semi kinda-sorta restocked. I say this because I updated my Emperor listing the other day with the example I just made and I swear I did not have the son of a bitch up for four whole minutes before somebody bought it. I’ve updated the design with a new radial grind, fancier handle scale options, and now even thicker steel.

I suppose I kind of let slip with this knowledge when I posted this photo elsewhere.

Here’s another one:

I used some new steel from a new supplier for these, and I can’t say that I’m 100% happy with it. The surface finish isn’t the greatest and there are some pock marks and gouges in the stock that are too deep for me to realistically sand out, or at least until I accrue enough to afford a surface grinder. But on the bright side it’s even thicker than before, at 7.47mm or 0.295", even greater than a quarter inch. These things are a slab.

I only made one because I used that chunk of steel to produce two of a new design:

Meet the Humbolt, a pattern that takes the absurd choppiness of my stock all the way to its logical conclusion with a straight profiled basher that’ll be equally at home splitting your firewood at camp as it would be felling the tree it came from in the first place.

I’ve also been fooling with transparent ABS as part of my handle scales. Well, translucent by the time all is said and done, really. I’m particularly fond of this “Ectoplasm” colorway which incorporates alternating layers of translucent and bright green, and lets sunlight shine through it. It doesn’t glow in the dark, alas, but it almost looks like it ought to.

I have a smattering of S variant Kings in stock as well in various colorways. Some of ‘ems nicer lookin’ than others. These are thin enough to fit in my Ruixin jig, by the way, so I make these in particular stupid sharp before I ship them out.

Also!

Check it out. Badass wind chimes. (Actually, these are dangling while my rust preventative coating dries.)

And here they are a-lying in a bunch.

In case you’ve been wondering what I’ve been doing rather than shitposting about knives lately. The answer is, making knives to subsequently shitpost about. And also camping.

My store is semi kinda-sorta restocked. I say this because I updated my Emperor listing the other day with the example I just made and I swear I did not have the son of a bitch up for four whole minutes before somebody bought it. I’ve updated the design with a new radial grind, fancier handle scale options, and now even thicker steel.

I suppose I kind of let slip with this knowledge when I posted this photo elsewhere.

Here’s another one:

I used some new steel from a new supplier for these, and I can’t say that I’m 100% happy with it. The surface finish isn’t the greatest and there are some pock marks and gouges in the stock that are too deep for me to realistically sand out, or at least until I accrue enough to afford a surface grinder. But on the bright side it’s even thicker than before, at 7.47mm or 0.295", even greater than a quarter inch. These things are a slab.

I only made one because I used that chunk of steel to produce two of a new design:

Meet the Humbolt, a pattern that takes the absurd choppiness of my stock all the way to its logical conclusion with a straight profiled basher that’ll be equally at home splitting your firewood at camp as it would be felling the tree it came from in the first place.

I’ve also been fooling with transparent ABS as part of my handle scales. Well, translucent by the time all is said and done, really. I’m particularly fond of this “Ectoplasm” colorway which incorporates alternating layers of translucent and bright green, and lets sunlight shine through it. It doesn’t glow in the dark, alas, but it almost looks like it ought to.

I have a smattering of S variant Kings in stock as well in various colorways. Some of ‘ems nicer lookin’ than others. These are thin enough to fit in my Ruixin jig, by the way, so I make these in particular stupid sharp before I ship them out.

Also!

Check it out. Badass wind chimes. (Actually, these are dangling while my rust preventative coating dries.)

0

GPU Jesus' EDC Confirmed!

preview

Nerd alert!

I spotted Gamers Nexus’ very own Steve Burke using what appears to be a Gerber Paralite in their latest totally not an unboxing video, which also happens to be on a set of topics very near and dear to all our hearts around here (probably, or at least certainly mine) including but not limited to giving Sony the middle finger twice on camera, reveling in physical media ownership, spending tons of money on niche production equipment, and hawking silly homebrew products online in 3D printed packaging.

Now there’s an endeavor I can respect.

Maybe if we all chip in we can help our man afford a nicer knife.

Nerd alert!

I spotted Gamers Nexus’ very own Steve Burke using what appears to be a Gerber Paralite in their latest totally not an unboxing video, which also happens to be on a set of topics very near and dear to all our hearts around here (probably, or at least certainly mine) including but not limited to giving Sony the middle finger twice on camera, reveling in physical media ownership, spending tons of money on niche production equipment, and hawking silly homebrew products online in 3D printed packaging.

Now there’s an endeavor I can respect.

Maybe if we all chip in we can help our man afford a nicer knife.

0

Weird Knife Wednesday: Reate Exo-K

preview

It is categorically impossible to buy an Exo-K.

That’s not because it’s particularly rare or anything, or even very expensive in the grand scheme of things. It’s actually because inside its swanky magnet latched box…

…You automatically get two of them.

That’s in addition to this impressive spread of pack-in feelies, which includes a microfiber cleaning cloth, a baggie of spare screws and a replacement button spring, a sticker and a tactical Velcro patch, and little certificate of authenticity that doesn’t just look like a credit card but is even actually made out of the same kind of plastic.

Therefore it is clearly automatically an excellent deal, even for $167. You can tell this to your spouse and/or domestic partner of choice with absolute confidence. No, it’d actually be silly not to buy a pair. Don’t you see?

The Exo-K is Reate’s latest and greatest foray into the exciting world of highly mechanically overwrought pocketknives. And given how their previous Exo-M variant got so thoroughly ripped off by the Chinese knockoff brigade, it’s also such a ludicrous level of bonkers that it seems to be offering an outright challenge to the world. Like, oh yeah? Let’s see you figure out how to clone this one, punks.

It also doesn’t even include a trainer blade in the package. It includes a whole 'nother trainer knife, complete, and mechanically identical to its live bladed counterpart with many interchangeable parts. So, she’s taken you home and it turns out she brought her friend, and she really really really hopes you don’t mind. You don’t, do you?

Both knives are identical in function and construction but not materials. The live blade one is aluminum bodied and in this case in a fetching deep green, whereas the trainer one is injection moulded fiber reinforced polymer of some description — probably Nylon. It comes in brown and it’s got speed holes in the blade.

Thus while their dimensions are the same the weights are not: The live one is 127.1 grams / 4.49 ounces and the trainer is a slightly lighter 110.6 grams / 3.9 ounces. Both are 6-5/8" (168.28mm) long if you measure from stem to stern in a straight line, but I’ll be damned what the measurement is if you could somehow account for the curvature. The blades are exactly 3" (76.2mm) by the same metric, with nearly the entire thing being usable on the live version and precisely zero inches of it being usable on the trainer one.

The blurb deals with all this by not dealing with it at all. Inevitably, all of the specs for this thing mention only half of the knives you get in the box, describing the pattern in the aluminum handles on the live knife as a “frag grenade” texture in case it perhaps could go off in your hand, the blade as stonewash finished Bohler N690 steel at 60 HRC, and not saying anything about the trainer at all.

As such just what the trainer’s blade is made out of remains a mystery. Something cheap, I’m guessing, and certainly not another slab of N690 because if it were the Internet would be full of knife nerds crowing about how they’d gone and hewn an edge into it too, and got two knives for the price of one. Oh em gee, life hack! But because they haven’t we can safely assume it’s some kind of cheap low-rent alloy instead. If you were sufficiently motivated at least you could probably swap the blades between both bodies, and also the shiny and black finished hardware as well.

But never mind all of that. The Exo-K is clearly the grand master 8th dan final boss of internet knife hipster’s knives, because it provides the full bevy of enticements: It’s moderately exclusive, it’s got a mechanism that renders it illegal in many jurisdictions, it’s got a zany action which inherently makes it difficult to use, and if wielded incorrectly it also has an innate ability to injure its user. I don’t know if somebody’s been reading my entire wish list or what, but all right.

On his seminal work on the topic of Japan, Dave Barry once noted that the ideal gift for a Japanese person would be a melon crossbred somehow with a venomous spider, such that not only would it be fantastically expensive but also if it were handled incorrectly it would bite its recipient, and everyone would know it. The Exo-K is exactly this. It’s a plate of fugu, dressed up like a knife. It’s just as well that it has that frag grenade texture, because the pin’s already been pulled. If you know, you know. And if you don’t, you’ll probably find out in a couple of seconds.

Reate attempt to bill the Exo-K as a gravity knife, which is why the law tends to frown upon it. It really isn’t, but this is surely to tie it thematically to the aforementioned Exo-M. Or, possibly, to help ride on the coattails of the latter’s popularity. Not that it needs much help, given that this model is already the current darling of the Internet short form video you-won’t-believe-this-knife brigade. It’s a button locker, and if you simply press the button and hold it upside down part of the action will indeed fall out freely. But you can’t actually open it fully simply under the power of gravity alone. There’s a detent in its double-jointed armature, and a flick of the wrist is required to snap the blade out into its fully ready to deploy state.

Failure to do so with adequate gusto, of course, instead puts the blade in a position to pass back through the opposite handle and bite you.

The Exo-K therefore requires sufficient commitment to use it. Presumably you’re meant to figure this out with the trainer first, rather than the fun way. Unless you’re a wimp.

You can also cause the tip of the blade to crash into the anodized surface on the front face of the ring, leaving a helpfully identifying idiot mark. If you look carefully you’ll notice that in all of these these pictures that I have managed not to do this to mine, which is because I am awesome.

Closing it is necessarily slower and not quite as slick, but still requires a sufficient understanding of the mechanics. Again, the recompense for failure is payable in blood.

Nobody watching you use this thing will be able to figure out how the hell it works. This is absolutely not a knife you can lend to anyone. On the bright side, this will also prevent people from asking to borrow it. Probably after the first time, anyway.

And the best part is, it’s subtle about it. If you had, for purest sake of example, a balisong knife nobody who isn’t properly initiated would even dare touch the thing. But this presents just enough of an impression of accessibility that it may tempt the neophyte to try it. And then they’ll find out if they’re worthy.

The Exo-K is obviously a karambit, which come to think of it is probably where the -K part comes from. It’s yet another swing at the folding karambit idea, but unlike all of the others it doesn’t confine itself to the bounds of practicality in any way whatsoever. You can make up any justification for it you like, but it’s also not a fighting knife. Anyone who were going to try to fight with the thing would surely just pack a fixed bladed one instead and make their life a whole lot simpler. And the deeply curved hawkbill profile is not going to make it the best choice for general utility use even after taking into account that you’ll wind up holding it backwards every time you bust it out.

It’s got a very shiny set of hardware including a traditionally constructed pocket clip that is completely reversible, as is the release button if you’re brave enough to break its threadlocker with a pair of T8 bits and unscrew it. It’s not ambidextrous in any way whatsoever but it can be fully converted for left handed use.

There’s even an offside filler for the pocket where the clip would go on the other side, which as you all know is the sort of thing that excites me a lot.

If you’d prefer yours not be a karambit you can even remove the ring if you like. It’s restrained by the same long Chicago screws as the clip, and if you’d like your Exo-K to be more discreet but considerably harder to operate you can just omit it. Here I’ve also shown the removal of one of the armature covers, because I was just taking things apart all willy-nilly and didn’t consider the narrative implications until it was too late.

The underside of the main pivot contains the strangest bronze washer I’ve ever seen in my life, which has a cutout in it to accommodate the detent spring and its ceramic ball, which is what serves to keep the blade from just knocking around loose when you have the knife half open. The pivot screw has an anti-rotation flat and the washer is broached for the same on this side, so it’s impossible to install it incorrectly.

The major pivots have bushings in addition to the bronze washers, by the way.

Here’s the whole spread:

The release button unscrews into two halves, a washer, and a spring. A replacement spring is provided in the care package included in the box, presumably for when yours goes “ping!” upon first removal and is never seen again. The button halves are threadlockered together, but if you manage to muster the grunt and dexterity to bust them loose you can swap the button over to the other side by half opening the knife and simply reassembling this the other way around.

The serial number and date of production are etched into the armature, there. Now if I come over all supercilious and mention that I’ve had just this lying around for ages in my knife drawer before getting around to it, don’t you know, someone might actually believe me. I haven’t, but at least it’ll sound plausible. I also suspect the different colorways have separate serial number ranges, because otherwise my serial seems suspiciously low and I can’t imagine there are so few people in the world who’ve owned one of these ahead of me. I could be wrong; Maybe I really am ranked the 49th coolest motherfucker on Earth.

And the back of the blade sports what is quite possibly the single most appropriate maker’s mark in all of human history.

The Inevitable Conclusion

If you’re ever feeling like life’s got you down, allow me to point out that one half the Reate Exo-K looks like a tiny dinosaur.

Or perhaps an aluminum peacock that’s very satisfied with itself. It even comes with a friend. Therefore I submit to you that you absolutely cannot go wrong with this, no matter what else it is you do.

It is categorically impossible to buy an Exo-K.

That’s not because it’s particularly rare or anything, or even very expensive in the grand scheme of things. It’s actually because inside its swanky magnet latched box…

…You automatically get two of them.

That’s in addition to this impressive spread of pack-in feelies, which includes a microfiber cleaning cloth, a baggie of spare screws and a replacement button spring, a sticker and a tactical Velcro patch, and little certificate of authenticity that doesn’t just look like a credit card but is even actually made out of the same kind of plastic.

Therefore it is clearly automatically an excellent deal, even for $167. You can tell this to your spouse and/or domestic partner of choice with absolute confidence. No, it’d actually be silly not to buy a pair. Don’t you see?

The Exo-K is Reate’s latest and greatest foray into the exciting world of highly mechanically overwrought pocketknives. And given how their previous Exo-M variant got so thoroughly ripped off by the Chinese knockoff brigade, it’s also such a ludicrous level of bonkers that it seems to be offering an outright challenge to the world. Like, oh yeah? Let’s see you figure out how to clone this one, punks.

It also doesn’t even include a trainer blade in the package. It includes a whole 'nother trainer knife, complete, and mechanically identical to its live bladed counterpart with many interchangeable parts. So, she’s taken you home and it turns out she brought her friend, and she really really really hopes you don’t mind. You don’t, do you?

Both knives are identical in function and construction but not materials. The live blade one is aluminum bodied and in this case in a fetching deep green, whereas the trainer one is injection moulded fiber reinforced polymer of some description — probably Nylon. It comes in brown and it’s got speed holes in the blade.

Thus while their dimensions are the same the weights are not: The live one is 127.1 grams / 4.49 ounces and the trainer is a slightly lighter 110.6 grams / 3.9 ounces. Both are 6-5/8" (168.28mm) long if you measure from stem to stern in a straight line, but I’ll be damned what the measurement is if you could somehow account for the curvature. The blades are exactly 3" (76.2mm) by the same metric, with nearly the entire thing being usable on the live version and precisely zero inches of it being usable on the trainer one.

The blurb deals with all this by not dealing with it at all. Inevitably, all of the specs for this thing mention only half of the knives you get in the box, describing the pattern in the aluminum handles on the live knife as a “frag grenade” texture in case it perhaps could go off in your hand, the blade as stonewash finished Bohler N690 steel at 60 HRC, and not saying anything about the trainer at all.

As such just what the trainer’s blade is made out of remains a mystery. Something cheap, I’m guessing, and certainly not another slab of N690 because if it were the Internet would be full of knife nerds crowing about how they’d gone and hewn an edge into it too, and got two knives for the price of one. Oh em gee, life hack! But because they haven’t we can safely assume it’s some kind of cheap low-rent alloy instead. If you were sufficiently motivated at least you could probably swap the blades between both bodies, and also the shiny and black finished hardware as well.

But never mind all of that. The Exo-K is clearly the grand master 8th dan final boss of internet knife hipster’s knives, because it provides the full bevy of enticements: It’s moderately exclusive, it’s got a mechanism that renders it illegal in many jurisdictions, it’s got a zany action which inherently makes it difficult to use, and if wielded incorrectly it also has an innate ability to injure its user. I don’t know if somebody’s been reading my entire wish list or what, but all right.

On his seminal work on the topic of Japan, Dave Barry once noted that the ideal gift for a Japanese person would be a melon crossbred somehow with a venomous spider, such that not only would it be fantastically expensive but also if it were handled incorrectly it would bite its recipient, and everyone would know it. The Exo-K is exactly this. It’s a plate of fugu, dressed up like a knife. It’s just as well that it has that frag grenade texture, because the pin’s already been pulled. If you know, you know. And if you don’t, you’ll probably find out in a couple of seconds.

Reate attempt to bill the Exo-K as a gravity knife, which is why the law tends to frown upon it. It really isn’t, but this is surely to tie it thematically to the aforementioned Exo-M. Or, possibly, to help ride on the coattails of the latter’s popularity. Not that it needs much help, given that this model is already the current darling of the Internet short form video you-won’t-believe-this-knife brigade. It’s a button locker, and if you simply press the button and hold it upside down part of the action will indeed fall out freely. But you can’t actually open it fully simply under the power of gravity alone. There’s a detent in its double-jointed armature, and a flick of the wrist is required to snap the blade out into its fully ready to deploy state.

Failure to do so with adequate gusto, of course, instead puts the blade in a position to pass back through the opposite handle and bite you.

The Exo-K therefore requires sufficient commitment to use it. Presumably you’re meant to figure this out with the trainer first, rather than the fun way. Unless you’re a wimp.

You can also cause the tip of the blade to crash into the anodized surface on the front face of the ring, leaving a helpfully identifying idiot mark. If you look carefully you’ll notice that in all of these these pictures that I have managed not to do this to mine, which is because I am awesome.

Closing it is necessarily slower and not quite as slick, but still requires a sufficient understanding of the mechanics. Again, the recompense for failure is payable in blood.

Nobody watching you use this thing will be able to figure out how the hell it works. This is absolutely not a knife you can lend to anyone. On the bright side, this will also prevent people from asking to borrow it. Probably after the first time, anyway.

And the best part is, it’s subtle about it. If you had, for purest sake of example, a balisong knife nobody who isn’t properly initiated would even dare touch the thing. But this presents just enough of an impression of accessibility that it may tempt the neophyte to try it. And then they’ll find out if they’re worthy.

The Exo-K is obviously a karambit, which come to think of it is probably where the -K part comes from. It’s yet another swing at the folding karambit idea, but unlike all of the others it doesn’t confine itself to the bounds of practicality in any way whatsoever. You can make up any justification for it you like, but it’s also not a fighting knife. Anyone who were going to try to fight with the thing would surely just pack a fixed bladed one instead and make their life a whole lot simpler. And the deeply curved hawkbill profile is not going to make it the best choice for general utility use even after taking into account that you’ll wind up holding it backwards every time you bust it out.

It’s got a very shiny set of hardware including a traditionally constructed pocket clip that is completely reversible, as is the release button if you’re brave enough to break its threadlocker with a pair of T8 bits and unscrew it. It’s not ambidextrous in any way whatsoever but it can be fully converted for left handed use.

There’s even an offside filler for the pocket where the clip would go on the other side, which as you all know is the sort of thing that excites me a lot.

If you’d prefer yours not be a karambit you can even remove the ring if you like. It’s restrained by the same long Chicago screws as the clip, and if you’d like your Exo-K to be more discreet but considerably harder to operate you can just omit it. Here I’ve also shown the removal of one of the armature covers, because I was just taking things apart all willy-nilly and didn’t consider the narrative implications until it was too late.

The underside of the main pivot contains the strangest bronze washer I’ve ever seen in my life, which has a cutout in it to accommodate the detent spring and its ceramic ball, which is what serves to keep the blade from just knocking around loose when you have the knife half open. The pivot screw has an anti-rotation flat and the washer is broached for the same on this side, so it’s impossible to install it incorrectly.

The major pivots have bushings in addition to the bronze washers, by the way.

Here’s the whole spread:

The release button unscrews into two halves, a washer, and a spring. A replacement spring is provided in the care package included in the box, presumably for when yours goes “ping!” upon first removal and is never seen again. The button halves are threadlockered together, but if you manage to muster the grunt and dexterity to bust them loose you can swap the button over to the other side by half opening the knife and simply reassembling this the other way around.

The serial number and date of production are etched into the armature, there. Now if I come over all supercilious and mention that I’ve had just this lying around for ages in my knife drawer before getting around to it, don’t you know, someone might actually believe me. I haven’t, but at least it’ll sound plausible. I also suspect the different colorways have separate serial number ranges, because otherwise my serial seems suspiciously low and I can’t imagine there are so few people in the world who’ve owned one of these ahead of me. I could be wrong; Maybe I really am ranked the 49th coolest motherfucker on Earth.

And the back of the blade sports what is quite possibly the single most appropriate maker’s mark in all of human history.

The Inevitable Conclusion

If you’re ever feeling like life’s got you down, allow me to point out that one half the Reate Exo-K looks like a tiny dinosaur.

Or perhaps an aluminum peacock that’s very satisfied with itself. It even comes with a friend. Therefore I submit to you that you absolutely cannot go wrong with this, no matter what else it is you do.

0

Thunk

preview

Since I’ve been absent here a while but I’ve been slowly going through my backlog of old camping photos in order to pretend to generate content to justify an upcoming announcement, here’s a high quality cutlery related shitpost courtesy of yours truly.

I took this photo in 2014 at a campsite in the Allegheny National Forest. I was camping with my nephew and one of our friends. Said friend asked us, after watching one or the other of us produce yet another piece of unlikely cutlery from about our persons somewhere, “Just how many blades do you guys have on you, anyway?”

This was the result of said throw-down.

From left to right is my nephew’s Ontario Blackbird, a Ganzo G704, his newer Leatherman Surge, my old bush sword (I still have it, but I have a better one now) which is some ghastly Chinese thing from the BudK catalog, my Kershaw Junkyard dog, my rather older Leatherman Surge, his Ontario machete, my Boker PSK.

And. My. Axe. (It’s a SOG FastHawk.)

I have in the past had wide-eyed city slickers ask me what we do if we encounter a bear, mountain lion, or crazed ruffian in the woods.

Roll for initiative, obviously.

Since I’ve been absent here a while but I’ve been slowly going through my backlog of old camping photos in order to pretend to generate content to justify an upcoming announcement, here’s a high quality cutlery related shitpost courtesy of yours truly.

I took this photo in 2014 at a campsite in the Allegheny National Forest. I was camping with my nephew and one of our friends. Said friend asked us, after watching one or the other of us produce yet another piece of unlikely cutlery from about our persons somewhere, “Just how many blades do you guys have on you, anyway?”

This was the result of said throw-down.

From left to right is my nephew’s Ontario Blackbird, a Ganzo G704, his newer Leatherman Surge, my old bush sword (I still have it, but I have a better one now) which is some ghastly Chinese thing from the BudK catalog, my Kershaw Junkyard dog, my rather older Leatherman Surge, his Ontario machete, my Boker PSK.

And. My. Axe. (It’s a SOG FastHawk.)

I have in the past had wide-eyed city slickers ask me what we do if we encounter a bear, mountain lion, or crazed ruffian in the woods.

Roll for initiative, obviously.

0

Weird Knife Wednesday: CRKT Gravitic Flip

preview

Sometimes I wonder if I ought to rename this gig “The CRKT Show.” Certainly it seems that a pattern emerges regarding a surprising number of their lineup. I couldn’t begin to guess why this is, but I’m down for it.

Here is the Gravitic Flip, which is in fact not a B list direct to video ‘90s superhero movie based on some obscure Dark Horse Comics property, but is rather yet another point on the universal curve of probability. That is to say, if any given mechanism exists then its appearance behind the action of some manner of folding knife is a mere matter of time.

From the outside, the Gravitic Flip doesn’t reveal much. Of course, from the name you can take a pretty good guess at how it works. Yes, it’s a gravity knife. A double edged one, too, so your local legislative body is probably already angry about it twice over. And it’s black.

This is a Ted Valerio design, and one wonders just what ray of inspiration may have struck him to produce this because nothing else on offer in his product lineup is quite as bonkers. Said lineup these days largely seems to consist of wave opening adapters and 3D printed whatsamajigs including one that goes on the venerable Kershaw CQC to turn it into a karambit. Now there’s something I can get behind.

Anyway it seems ol’ Ted got CRKT to make his knife for him, like so many others, and so here we are.

For your money, precisely $38 of it, you get this 4-3/16" long rectangle. It’s made of some manner of injection moulded polymer, and if I had to guess I’d say it’s FRN — fiber reinforced nylon. Glass fiber, if I’m any judge. The black paracord lanyard is included in the box, but it’s also curiously short. Even if you move the knot all the way down to the end the resulting loop is a shade too small to get your hand through. But that’s not the weird part.

Here’s how it works.

Grab the inset bar and, yes, flip it up.

The blade slides along its track and pops out the front. This is a non-switchblade OTF, then, which theoretically ought to help with its legality. Except it’s also explicitly a gravity knife so you’re right out of the frying pan and back into the fire.

Hup, hup.

A pair of neodymium button magnets sunk into the handle hold all the works in place, and a pair of ears on the flipper bar or whatever you want to call it drop into matching slots in the handle to keep the blade locked either in or out. And of course when brought anywhere within the same postcode as the types of metal shavings production that I engage in these days said magnets immediately and inescapably attract a bit of ferrous fuzz.

Since the blade has to be loose enough to drop out under the power of gravity and its track is only made out of fancy plastic in any case, this obviously engenders a bit of wiggle in it. In the stowed position the magnets do a passable but not quite complete job of keeping the blade from rattling around audibly inside.

Despite my artful avoidance of depicting it so far, the Gravitic Flip does include a clip. It’s short, stout, and incredibly tightly sprung. If anything, the lanyard is probably there to aid you in managing to rip the thing off of your pants. The clip isn’t reversible, not only because the notch it sits in is presented only on one side, but it’d also block the mechanism if you flipped it. Other than the lanyard hole the entire thing is thoroughly symmetrical anyhow, so all a left handed user would have to do is trouser it in the other pocket and it’ll be precisely equally difficult to open with either hand.

That’s because the Gravitic Flip’s mechanism, while certainly very clever, doesn’t provide you much to grab. You have to get a fingertip under either of the ears without dropping the thing in the process, and they’re rather small with not much of a cutout beneath them. If you flub it, the magnets are maddeningly prone to snapping the bar back into its locked position and are capable of doing so from a remarkable distance away. Getting it open reliably requires practice, and I would not recommend trying it under duress. Doing so with gloves on is likewise probably not a winning proposition.

Its little double edged blade is only 0.108" or 2.74mm thick and 0.591" / 15.03mm across, and it has no type of forward guard, grip aids, or finger rests whatsoever. It’s about 3-1/16" long with the entire ensemble adding up to nearly 7-1/2" precisely when it’s open.

The Inevitable Conclusion

At least neither CRKT nor Ted Valerio bother to make any implication that the Gravitic Flip is supposed to be any kind of fighting knife. Instead, they admit right in the blurb that it’s an EDC fidget toy, which is a job at which it excels much more handily.

Thanks to the bodaciousness of its inbuilt magnets and overall light weight (1.41 ounces or 40.05 grams including the lanyard, with mine) you can also stick it directly to a ferrous object and it’ll stay there. That, I think, puts it in a class of very few. For whatever that’s worth.

At least 38 bucks, one would hope.

Sometimes I wonder if I ought to rename this gig “The CRKT Show.” Certainly it seems that a pattern emerges regarding a surprising number of their lineup. I couldn’t begin to guess why this is, but I’m down for it.

Here is the Gravitic Flip, which is in fact not a B list direct to video ‘90s superhero movie based on some obscure Dark Horse Comics property, but is rather yet another point on the universal curve of probability. That is to say, if any given mechanism exists then its appearance behind the action of some manner of folding knife is a mere matter of time.

From the outside, the Gravitic Flip doesn’t reveal much. Of course, from the name you can take a pretty good guess at how it works. Yes, it’s a gravity knife. A double edged one, too, so your local legislative body is probably already angry about it twice over. And it’s black.

This is a Ted Valerio design, and one wonders just what ray of inspiration may have struck him to produce this because nothing else on offer in his product lineup is quite as bonkers. Said lineup these days largely seems to consist of wave opening adapters and 3D printed whatsamajigs including one that goes on the venerable Kershaw CQC to turn it into a karambit. Now there’s something I can get behind.

Anyway it seems ol’ Ted got CRKT to make his knife for him, like so many others, and so here we are.

For your money, precisely $38 of it, you get this 4-3/16" long rectangle. It’s made of some manner of injection moulded polymer, and if I had to guess I’d say it’s FRN — fiber reinforced nylon. Glass fiber, if I’m any judge. The black paracord lanyard is included in the box, but it’s also curiously short. Even if you move the knot all the way down to the end the resulting loop is a shade too small to get your hand through. But that’s not the weird part.

Here’s how it works.

Grab the inset bar and, yes, flip it up.

The blade slides along its track and pops out the front. This is a non-switchblade OTF, then, which theoretically ought to help with its legality. Except it’s also explicitly a gravity knife so you’re right out of the frying pan and back into the fire.

Hup, hup.

A pair of neodymium button magnets sunk into the handle hold all the works in place, and a pair of ears on the flipper bar or whatever you want to call it drop into matching slots in the handle to keep the blade locked either in or out. And of course when brought anywhere within the same postcode as the types of metal shavings production that I engage in these days said magnets immediately and inescapably attract a bit of ferrous fuzz.

Since the blade has to be loose enough to drop out under the power of gravity and its track is only made out of fancy plastic in any case, this obviously engenders a bit of wiggle in it. In the stowed position the magnets do a passable but not quite complete job of keeping the blade from rattling around audibly inside.

Despite my artful avoidance of depicting it so far, the Gravitic Flip does include a clip. It’s short, stout, and incredibly tightly sprung. If anything, the lanyard is probably there to aid you in managing to rip the thing off of your pants. The clip isn’t reversible, not only because the notch it sits in is presented only on one side, but it’d also block the mechanism if you flipped it. Other than the lanyard hole the entire thing is thoroughly symmetrical anyhow, so all a left handed user would have to do is trouser it in the other pocket and it’ll be precisely equally difficult to open with either hand.

That’s because the Gravitic Flip’s mechanism, while certainly very clever, doesn’t provide you much to grab. You have to get a fingertip under either of the ears without dropping the thing in the process, and they’re rather small with not much of a cutout beneath them. If you flub it, the magnets are maddeningly prone to snapping the bar back into its locked position and are capable of doing so from a remarkable distance away. Getting it open reliably requires practice, and I would not recommend trying it under duress. Doing so with gloves on is likewise probably not a winning proposition.

Its little double edged blade is only 0.108" or 2.74mm thick and 0.591" / 15.03mm across, and it has no type of forward guard, grip aids, or finger rests whatsoever. It’s about 3-1/16" long with the entire ensemble adding up to nearly 7-1/2" precisely when it’s open.

The Inevitable Conclusion

At least neither CRKT nor Ted Valerio bother to make any implication that the Gravitic Flip is supposed to be any kind of fighting knife. Instead, they admit right in the blurb that it’s an EDC fidget toy, which is a job at which it excels much more handily.

Thanks to the bodaciousness of its inbuilt magnets and overall light weight (1.41 ounces or 40.05 grams including the lanyard, with mine) you can also stick it directly to a ferrous object and it’ll stay there. That, I think, puts it in a class of very few. For whatever that’s worth.

At least 38 bucks, one would hope.

0

4th of July weekend, the Civivi Elementum button lock

Civivi Elementum button lock knife with green micarta scales sitting on the book Dungeon Crawler Carl which itself is sitting on the ground.
preview

Happy 4th of July to those who celebrate. This weekend’s carry is the Civivi Elementum button lock. Not to be confused with the later made Elementum II which also has a button lock, but has the original 3" blade. This has a 3.5" blade and the button lock is used for both opening and closing the knife. You cannot open it without using the button. I’m not sure why they designed it this way but the choice makes it very fidget friendly. (The Elementum II is a “normal” button lock with a flipper tab.)

The heat index is 103 deg F as I’m writing this and we lost the nice breeze we had, so I’m already exhausted. Maybe a comparison between the different Elementum versions I have at a future date.

Happy 4th of July to those who celebrate. This weekend’s carry is the Civivi Elementum button lock. Not to be confused with the later made Elementum II which also has a button lock, but has the original 3" blade. This has a 3.5" blade and the button lock is used for both opening and closing the knife. You cannot open it without using the button. I’m not sure why they designed it this way but the choice makes it very fidget friendly. (The Elementum II is a “normal” button lock with a flipper tab.)

The heat index is 103 deg F as I’m writing this and we lost the nice breeze we had, so I’m already exhausted. Maybe a comparison between the different Elementum versions I have at a future date.

0

Weird Knife Wednesday: CRKT Provoke EDC

preview

^…Where^ ^we^ ^came^ ^in?^

One thousand and twenty one days ago, because I thought you might like to go to the show, I made my very… second… post in this series. All in all it might have been more appropriate if it were my first, but followup albums are usually better anyway. That was for the CRKT Provoke Zap, and it’s post that’s so old and busted that it doesn’t even have a headline picture. I’ve kept promising to redo that one with better lightning and better photography and more words, and, well. I still haven’t.

So anyway, here’s this.

Now we’ve come full circle in a very roundabout fashion. Right back to the beginning, except… not the same.

This is the CRKT Provoke EDC, and if you’re wondering if you ought to buy a Provoke Zap for general carry-about duty and $75 less: No, you shouldn’t. You should buy this instead.

There have been lots of attempts to finagle the karambit idea into being a folding knife over the years, some better than others. The classic Provoke and indeed its Zap incarnation are probably among the better runups at this idea, but they’re still kind of a single purpose apparatus. The Provoke EDC, on the other hand, is a karambit that somebody took the karambit out of. Cold, perhaps, as a razor blade, it ditches the hawkbill vibe and instead has a flat ground and more traditionally sharped drop point blade made of D2 that’s about 2-1/2" long (63.5mm) with 2-1/4" or so (57.15mm) of usable edge.

It does, however, retain the original’s rather byzantine “kinematic morphing action” mechanical arrangement that sees the blade transiting up and around and forward on a pair of swinging armatures rather than doing anything as predictable as merely pivoting. It’s another Joe Caswell design, just like the original Provoke.

Unlike the Zap and its various grivory/fiber reinforced nylon bodied brethren, the Provoke EDC is one of CRKT’s premium all aluminum jobbies. That results in a pleasingly refined action and a much less Fisher Price feel in the hand by comparison, although you do pay $185 for the privilege of holding it. But I’m alright on that score, Jack. Just keep your hands off of my stack.

Because of or possibly despite that, the Provoke EDC feels dense and solid at 3.47 ounces or 98.4 grams.

What with the big old ring on the back, the intended method still seems to be thumbing it open like this, which results in you holding it in this reverse grip sort of style. It’s also possible, although decidedly less slick, to deploy it forward with your pinky landing in the ring instead if, for purest sake of example, you’d like to use your knife without winding up looking like Johnny in front of everybody.

Closing it again is more of a faff about. There’s a toggle at the back you have to push down, which as far as I can tell is purpose built to be absolutely impossible to reach with the same hand as you’re holding the knife in. It’s still a lot easier to find and use than the one on the Provoke Zap, though, so it’s got that going for it.

The Provoke’s aluminum armatures interlock just about perfectly in both their rear and forward positions, presumably being obsessively and precisely shaped in order to do so. I hope somebody gave old Joe a nice bonus for his trouble. A set of notches are cut into the tips of these which at first blush appear to be just decadent visual frippery, but if you commit to holding the thing frontways around are revealed to serve as jimping for your grip. There’s also a detent built into the mechanism for the closed position by way of the lock toggle half-resting in a notch cut out into the heel of the rear armature.

There’s a clip on the back that’s pretty much flush against the surface when it’s not in use. There’s a gap underneath it towards the back, and if you mash it right at that point the tip of it pops up so you can slide it over the seam in the pocket of your pants or your pinhole burned favorite silk shirt, or whatever else it is you’ve got.

Here’s a gratuitous demonstration of that, because I’m certainly not showing you weirdos my pants today. The clip can theoretically handle fabric of just about any thickness but it’s a real thumb workout to get it to open more than maybe 1/8", especially if you’re doing it from the angle of actually trying to stow it in anything resembling a sane and socially acceptable position. If you’ve got jeans or any other thick fabrics, this can turn into a two handed job. Drawing it is nice, though, owing to the lack of any grip greebles on the back surface of the clip. It stays on by sheer spring tension, of which it has a more than adequate supply. Grabbing it in the way you’re naturally inclined by pinching through the ring with your thumb and index finger also automatically puts it in position to open it into that reverse grip.

The Inevitable Conclusion

Your new favorite axe, a toy in the attic?

Or all in all, is it just another knife on the wall?

The Provoke EDC is a great option if you have the cash to burn and want to be able to rock a kinematic folder while wasting neither your money nor patience on a nasty horrible knockoff, and would also prefer a knife that doesn’t make you look like the Park Street Slasher whenever you bust it out. It even comes in two colorways, this blue anodized variant as well as a black one. But the black one has a coated blade, so we know which one the correct choice is.

^Isn’t^ ^this…^

^…Where^ ^we^ ^came^ ^in?^

One thousand and twenty one days ago, because I thought you might like to go to the show, I made my very… second… post in this series. All in all it might have been more appropriate if it were my first, but followup albums are usually better anyway. That was for the CRKT Provoke Zap, and it’s post that’s so old and busted that it doesn’t even have a headline picture. I’ve kept promising to redo that one with better lightning and better photography and more words, and, well. I still haven’t.

So anyway, here’s this.

Now we’ve come full circle in a very roundabout fashion. Right back to the beginning, except… not the same.

This is the CRKT Provoke EDC, and if you’re wondering if you ought to buy a Provoke Zap for general carry-about duty and $75 less: No, you shouldn’t. You should buy this instead.

There have been lots of attempts to finagle the karambit idea into being a folding knife over the years, some better than others. The classic Provoke and indeed its Zap incarnation are probably among the better runups at this idea, but they’re still kind of a single purpose apparatus. The Provoke EDC, on the other hand, is a karambit that somebody took the karambit out of. Cold, perhaps, as a razor blade, it ditches the hawkbill vibe and instead has a flat ground and more traditionally sharped drop point blade made of D2 that’s about 2-1/2" long (63.5mm) with 2-1/4" or so (57.15mm) of usable edge.

It does, however, retain the original’s rather byzantine “kinematic morphing action” mechanical arrangement that sees the blade transiting up and around and forward on a pair of swinging armatures rather than doing anything as predictable as merely pivoting. It’s another Joe Caswell design, just like the original Provoke.

Unlike the Zap and its various grivory/fiber reinforced nylon bodied brethren, the Provoke EDC is one of CRKT’s premium all aluminum jobbies. That results in a pleasingly refined action and a much less Fisher Price feel in the hand by comparison, although you do pay $185 for the privilege of holding it. But I’m alright on that score, Jack. Just keep your hands off of my stack.

Because of or possibly despite that, the Provoke EDC feels dense and solid at 3.47 ounces or 98.4 grams.

What with the big old ring on the back, the intended method still seems to be thumbing it open like this, which results in you holding it in this reverse grip sort of style. It’s also possible, although decidedly less slick, to deploy it forward with your pinky landing in the ring instead if, for purest sake of example, you’d like to use your knife without winding up looking like Johnny in front of everybody.

Closing it again is more of a faff about. There’s a toggle at the back you have to push down, which as far as I can tell is purpose built to be absolutely impossible to reach with the same hand as you’re holding the knife in. It’s still a lot easier to find and use than the one on the Provoke Zap, though, so it’s got that going for it.

The Provoke’s aluminum armatures interlock just about perfectly in both their rear and forward positions, presumably being obsessively and precisely shaped in order to do so. I hope somebody gave old Joe a nice bonus for his trouble. A set of notches are cut into the tips of these which at first blush appear to be just decadent visual frippery, but if you commit to holding the thing frontways around are revealed to serve as jimping for your grip. There’s also a detent built into the mechanism for the closed position by way of the lock toggle half-resting in a notch cut out into the heel of the rear armature.

There’s a clip on the back that’s pretty much flush against the surface when it’s not in use. There’s a gap underneath it towards the back, and if you mash it right at that point the tip of it pops up so you can slide it over the seam in the pocket of your pants or your pinhole burned favorite silk shirt, or whatever else it is you’ve got.

Here’s a gratuitous demonstration of that, because I’m certainly not showing you weirdos my pants today. The clip can theoretically handle fabric of just about any thickness but it’s a real thumb workout to get it to open more than maybe 1/8", especially if you’re doing it from the angle of actually trying to stow it in anything resembling a sane and socially acceptable position. If you’ve got jeans or any other thick fabrics, this can turn into a two handed job. Drawing it is nice, though, owing to the lack of any grip greebles on the back surface of the clip. It stays on by sheer spring tension, of which it has a more than adequate supply. Grabbing it in the way you’re naturally inclined by pinching through the ring with your thumb and index finger also automatically puts it in position to open it into that reverse grip.

The Inevitable Conclusion

Your new favorite axe, a toy in the attic?

Or all in all, is it just another knife on the wall?

The Provoke EDC is a great option if you have the cash to burn and want to be able to rock a kinematic folder while wasting neither your money nor patience on a nasty horrible knockoff, and would also prefer a knife that doesn’t make you look like the Park Street Slasher whenever you bust it out. It even comes in two colorways, this blue anodized variant as well as a black one. But the black one has a coated blade, so we know which one the correct choice is.

^Isn’t^ ^this…^

0

3d Printed Scales for QSP Penquin

preview

As is tradition I am going to give you a bit of a story here. While I may not be as eloquent as Dual hopefully I can get half the charm.

My old man is an engineer coming up on the end of his career and has lived working with CAD of some flavor for the majority of it. This past Christmas to his fatherly discontent the kids got him a Bambu Labs PS1. Even with is himing and hawing about it being too expensive and he was not ready to use it, it got the ball rolling. Come the tail end of February he has a standing desk, dual monitor, a Dell refurb with a Nvidia fancy ECC GPU that I told him is overkill…yet he got bit by the bug which I am greatful for. Warms my heart to see the old enginerd excited.

Now, time for the part that is actually pertinent to this sub. He has been having fun learning his new software and tools so I asked him to print me some new scales for my Penquin as I was not a fan of the tan ones I ordered. I am a big fisherman so he learned how to create textures and what you see is an attempt at fish scales. It took a bit of manual filing in some areas as he is a perfectionist and wants the tightest tolerances. Then the small buttons that actuate the sliding lock(press fit) are too tight of tolerances for the PS1 so I might try another solution there or even leave it as is.

If anyone is interested I am sure he would be tickled pink that others are using his design so let me know and I will pass them over. Just be ready to do some minor filling, although I will give him notes so he can update the files, fingers crossed yours will fit even better.

As a last note, I have some DCM I was planning on attempting some vapor smoothing on PLA with. I have a degree where I took plenty of chemistry and slung around my fair share of nasty solvents in labs so I will take the correct precautions so my progeny have the correct amount of digits. But if anyone has experience here I would take any insight as I tested on some BambuLabs silky PLA and the results were ok but not stellar.

The main image is my attempt as a sexy photo, but here are a couple more simple ones.

As is tradition I am going to give you a bit of a story here. While I may not be as eloquent as Dual hopefully I can get half the charm.

My old man is an engineer coming up on the end of his career and has lived working with CAD of some flavor for the majority of it. This past Christmas to his fatherly discontent the kids got him a Bambu Labs PS1. Even with is himing and hawing about it being too expensive and he was not ready to use it, it got the ball rolling. Come the tail end of February he has a standing desk, dual monitor, a Dell refurb with a Nvidia fancy ECC GPU that I told him is overkill…yet he got bit by the bug which I am greatful for. Warms my heart to see the old enginerd excited.

Now, time for the part that is actually pertinent to this sub. He has been having fun learning his new software and tools so I asked him to print me some new scales for my Penquin as I was not a fan of the tan ones I ordered. I am a big fisherman so he learned how to create textures and what you see is an attempt at fish scales. It took a bit of manual filing in some areas as he is a perfectionist and wants the tightest tolerances. Then the small buttons that actuate the sliding lock(press fit) are too tight of tolerances for the PS1 so I might try another solution there or even leave it as is.

If anyone is interested I am sure he would be tickled pink that others are using his design so let me know and I will pass them over. Just be ready to do some minor filling, although I will give him notes so he can update the files, fingers crossed yours will fit even better.

As a last note, I have some DCM I was planning on attempting some vapor smoothing on PLA with. I have a degree where I took plenty of chemistry and slung around my fair share of nasty solvents in labs so I will take the correct precautions so my progeny have the correct amount of digits. But if anyone has experience here I would take any insight as I tested on some BambuLabs silky PLA and the results were ok but not stellar.

The main image is my attempt as a sexy photo, but here are a couple more simple ones.

0

Benchmade Model 82: Fly.

preview

Life is full of things that are special, but cruel reality ensures that you won’t realize it at the time. Like the fireflies dancing over the meadow at dusk leaving their trails of curves and loops in the air that last a just a second or two each, thousands of them, glimmers that form a whole that can only truly exist in memory.

Long summer days spent with friends, when the world was still full of wonders and anything might still have been possible. New adventures, new experiences, new horizons to explore. And, perhaps, a new knife in your pocket. You can never go back to that time, and to someone without the right kind of mind you may never be able to explain it. That’s how it works; some things are only clear afterwards, when any curious thing may take you right back to that fond memory.

Youth is wasted on the young.

It’s been easily twenty years since I last bought a Benchmade balisong knife. It’s been twenty two, I think, since I bought my first. I didn’t note the date. You don’t think of that at the time, because you won’t realize that it’s one of those moments.

It was my Model 32, which was not my first balisong and truth be told it wasn’t my first Benchmade either, but it was my first balisong that was actually any good. Truly, a revelation after a whole procession of ghastly flea market rattletraps. It immediately became my daily companion for many years, and to this day is a treasured old friend living in prominent position in my knife rack. It’s the knife I wore to my wedding, and one of the very few in my collection of a couple of hundred to meaningfully appreciate in value since I bought it.

I pedaled my bicycle to the local gun store to pay $199 for it, an incredible amount of money hard earned from my dinky part-time job to pay for a mere pocketknife, but being pleased as pie the whole time to finally be 100% of the unimpeachable legal age to do so and thus there’s wasn’t a damn thing anyone could do to stop me. Maybe in some small way I already knew this was one of those pivotal moments, the otherwise unforeseeable kind that firmly sets somebody on one of life’s inevitable paths.

I’ve bought a couple of Benchmade balis since. A Model 53. A Mayhem. Oodles of clones of the 42 of various stripes from appealing to awful, some of which I may some day write about here. But never again have I quite managed to recapture that magic of the first time. It’s said that sort of thing is actually impossible.

But we can damn well give it a good try.

When I was given an opportunity recently to pick up a Model 82 “Laro” in person new in the box for slightly less than MSRP and well below the current going rate, I might have felt that little spark, that lift, the wind beneath my wings one more time. I knew I couldn’t pass it up.

The thing about angels, you see, is that most people only get one.

If you can get your hands on an 82 — a prospect that is as usual getting increasingly unlikely, although some of the lesser known retailers purport to still have a couple — you will pay the thick end of $650 for it. With that type of price tag, the Model 82 absolutely must be something special, because otherwise its entire existence would be moot. This immediately delineates the world into two types of people: those who get it, and those who don’t.

In order to explain, let’s talk about Harley Davidson for a moment.

Like them or hate them, the one inalienable truth about a Harley is that it is the one motorcycle in the world that anyone, even non-motorcycle people, can name. Harley Davidson did not invent the motorcycle. They did not, if we are going to be completely truthful, even meaningfully innovate or iterate on motorcycles as a whole in a mechanical sense. There are manufacturers in the world who make motorcycles that are cheaper, motorcycles that are faster, motorcycles that are more reliable, motorcycles that drip less oil in your driveway, and in fact in some cases all of the above. But none of that is the point.

What Harley Davidson has is the quintessential essence of the motorcycle. The shape, the outline, rumble in the seat, the wind all around you, the chrome flashing in the noonday sun, the zeitgeist and indeed the very image of the motorcycle is Harley’s stock and trade. Tires, engines, handlebars, spark plugs, tanks, and paint; All of those are mere details afterwards.

When you sit on a Harley, regardless of all else, there is the ineffable sense of occasion. Nothing else is a motorcycle, only this. It is James Dean and Hunter Thompson and Evel Knievel and Danny Trejo and even Clark Gable, and nothing can change that. Not management missteps, not the coddling with kid gloves by the Reagan administration, not even being owned by a bowling pin company; love them or hate them, it’s unlikely anything is going to diminish the legacy of Harley Davidson any time soon.

And so it is, winding our way circuitously back topic, with Benchmade and as it follows the Model 82.

Benchmade certainly didn’t invent the balisong knife — far from it. But a balisong knife is literally where Benchmade began, a fact which they celebrate to this day on the 82’s box and indeed even its blade with their now iconic bali-song logo. With it comes that same sense of occasion, a certain gravitas that’s impossible to quantify but somehow doesn’t come with a balisong from any other maker.

But before you accuse me of being the brochure for this thing, let it not be said that I haven’t been hard on the big B many times myself in the past. Often have I decried the ludicrous list prices on their mainstream models while they stolidly cling to an apparently static lineup while their competitors in many regards cruise right past. Finally being in a position to see things from the other side of the counter myself, so to speak, now I understand. It’s expensive because what goes into it is expensive and getting moreso all the time, especially if you’re still going to make it in America. So I get it, but that doesn’t mean I have to like it.

But some part of that is by the opposite side of the same token something that makes the Model 82, yes, that little bit special. Objectively, perhaps, there is no call in the world just yet for a $650 general purpose pocketknife. But if we were going to be purely objective all the time there would be no call whatsoever for any high end knives at all.

The 82’s drop pointed, stylized, and ventilated blade is made from Magnacut. That’s Larin Thomas’ home grown supersteel and the current state of the art and darling of high end knife steels.

This marks another first for me as well as it’s my first Magnacut knife.

That is to say my first that’s actually made from Magnacut, and not just one that says it is. (That “CLA” there is, I’m very sorry to report, fake as a snake. If the lack of a choil didn’t tip you off already. It’s mechanically impeccable and very interesting, but still fake. Perhaps we’ll discuss it later.)

I have no experience with Magnacut other than what I read. It’s supposed to be the all-singing, all-dancing, does-everything perfectly balanced wunderstooff of, if not the future, certainly this very minute. I’m sure I’ll find out about all that at least a little bit. But probably only a little, because it’s unlikely I’ll use this heavily.

But does it keeeeeel?

Probably. The Model 82 scores respectably for a factory edge out of the box. It’s an unfair comparison as usual, because the Bugout I use as my control has had its edge fanatically hand-polished by yours truly and then used for no purpose whatsoever other than producing these chart figures. The Model 82 has a tumbled stonewashed finish on its blade surface which no doubt introduces a tiny amount of drag, and at 0.104" or 2.64mm in cross section it’s also 20% thicker than the Bugout’s blade. All of these will negatively impact it on my dinkum paper cutting test by its very nature.

For whatever it’s worth I used it to open a pack of Gummi Bears last night and it went through the plastic packaging like it wasn’t even there.

The 82 is a compact number for a balisong, measuring up at 4-3/4" (120.65mm) closed and a whisker under 8-1/4" (209.55mm) open. The blade is 3-5/8" long (92.08mm) from the tips of the handles, but the usable edge starts before a large choil and is about 3-5/16" (84.14mm).

The styling is of course reminiscent of the Model 87 and/or the 85, or perhaps vise-versa, although the 82 is much closer to EDC sized. It has the same channel milled solid billet titanium handles, glaive headed screws, and even the same pattern of slots and holes milled in for lightening. It’s 125.3 grams or 4.42 ounces. With that plus the size, in reality maybe the more obvious comparison is my beloved Model 32 instead.

The 82 would be eminently EDC capable except I’ll bet you wouldn’t actually do it, you chicken. It also lacks a pocket clip, although in its stead you get what is, for lack of a better description, a holster. You may have spotted it nestled in the box above.

It’s either made from Kydex or something moulded very much to look like Kydex. I can’t tell if it’s an injection moulding or simply pressed with some manner of hideously complicated jig. It’s certainly not pressed around your individual knife, as it has distinct clearance and relief areas built into it to facilitate a clean draw without, presumably, scratching up the knife.

It’s got a clip on the back picked out with the Benchmade butterfly logo, and which is obviously intended for a belt and is not a pocket clip per se. It’s hooked over on the end and very highly sprung. There’s a grab tab on the tip of it but flexing it to snap onto your belt while you’re already wearing it is kind of a three handed job. Threading your belt through it is a better bet. The clip seems extremely robust and is just wide enough to clear a 2" pistol belt and even has adjustable retention, which is the sort of thing that’ll surely get any old whacker to pitch his tent.

The clip is folded over the top of the holster and screwed in through the back, which seems like it ought to be a tailor made recipe for scraping and damaging the finish on the handles.

…Except there are a pair of wings formed into the edges of the holster that space it out so it doesn’t touch. You have to be very ham-fisted indeed to shove the 82 into its holster such that it runs the risk of getting scratched.

Which is just as well, because it is an absolute thing of beauty.

The Torx and glaive headed hardware create a cohesive style throughout the entire ensemble. It’s a kicker pin design, so there are no Zen pins to be found in the handles here. But the pins and even the latch head carry the theme.

Squeeze the handles and the latch springs open of its own accord. Spring is the wrong word, though. This puppy is actually magnetic, with a trio of opposed doughnut shaped magnets tucked under the screw heads and on the shank of the latch. When the handles are squeezed far enough for the crosspin in the latch to clear its keyhole shaped home, it’s silently pushed out by magnetic repulsion and kept there proud of the handles and blade so it can’t clash.

The action is faultless. The 82 is a ball bearing pivoter and it’s also extremely rigid. There’s nary a wiggle, no tap, not a rattle to be found anywhere within it. It’s quiet, too, producing only a single understated click with each rebound. It is the polite, distinguished cough of the professional butler, nothing more. Just as you say, sir. Very good, sir.

Originally I was going to take this apart to show you, but I found that the screws were highly threadlockered and mine came from the factory in a perfect state of tune. The screw heads are matted just like the handles, and pristine. Do I really want to sully all of that? I don’t think I do.

The Inevitable Conclusion

I went out to breakfast with my wife the other day and the bill came to just over $50. It wasn’t anything fancy, just diner fare with a menu modification or two. Maybe that puts it all into perspective, these days.

Maybe we really are all headed to hell in a handbasket. Maybe it really was better back when and it’s not just that we remember it so. Cherish the special moments as we find them, then, and recognize them for what they are. They’ll never come around quite the same way again.

So maybe six hundred bucks is a bargain after all. Mere nothing, for the opportunity to hold perfection.

Life is full of things that are special, but cruel reality ensures that you won’t realize it at the time. Like the fireflies dancing over the meadow at dusk leaving their trails of curves and loops in the air that last a just a second or two each, thousands of them, glimmers that form a whole that can only truly exist in memory.

Long summer days spent with friends, when the world was still full of wonders and anything might still have been possible. New adventures, new experiences, new horizons to explore. And, perhaps, a new knife in your pocket. You can never go back to that time, and to someone without the right kind of mind you may never be able to explain it. That’s how it works; some things are only clear afterwards, when any curious thing may take you right back to that fond memory.

Youth is wasted on the young.

It’s been easily twenty years since I last bought a Benchmade balisong knife. It’s been twenty two, I think, since I bought my first. I didn’t note the date. You don’t think of that at the time, because you won’t realize that it’s one of those moments.

It was my Model 32, which was not my first balisong and truth be told it wasn’t my first Benchmade either, but it was my first balisong that was actually any good. Truly, a revelation after a whole procession of ghastly flea market rattletraps. It immediately became my daily companion for many years, and to this day is a treasured old friend living in prominent position in my knife rack. It’s the knife I wore to my wedding, and one of the very few in my collection of a couple of hundred to meaningfully appreciate in value since I bought it.

I pedaled my bicycle to the local gun store to pay $199 for it, an incredible amount of money hard earned from my dinky part-time job to pay for a mere pocketknife, but being pleased as pie the whole time to finally be 100% of the unimpeachable legal age to do so and thus there’s wasn’t a damn thing anyone could do to stop me. Maybe in some small way I already knew this was one of those pivotal moments, the otherwise unforeseeable kind that firmly sets somebody on one of life’s inevitable paths.

I’ve bought a couple of Benchmade balis since. A Model 53. A Mayhem. Oodles of clones of the 42 of various stripes from appealing to awful, some of which I may some day write about here. But never again have I quite managed to recapture that magic of the first time. It’s said that sort of thing is actually impossible.

But we can damn well give it a good try.

When I was given an opportunity recently to pick up a Model 82 “Laro” in person new in the box for slightly less than MSRP and well below the current going rate, I might have felt that little spark, that lift, the wind beneath my wings one more time. I knew I couldn’t pass it up.

The thing about angels, you see, is that most people only get one.

If you can get your hands on an 82 — a prospect that is as usual getting increasingly unlikely, although some of the lesser known retailers purport to still have a couple — you will pay the thick end of $650 for it. With that type of price tag, the Model 82 absolutely must be something special, because otherwise its entire existence would be moot. This immediately delineates the world into two types of people: those who get it, and those who don’t.

In order to explain, let’s talk about Harley Davidson for a moment.

Like them or hate them, the one inalienable truth about a Harley is that it is the one motorcycle in the world that anyone, even non-motorcycle people, can name. Harley Davidson did not invent the motorcycle. They did not, if we are going to be completely truthful, even meaningfully innovate or iterate on motorcycles as a whole in a mechanical sense. There are manufacturers in the world who make motorcycles that are cheaper, motorcycles that are faster, motorcycles that are more reliable, motorcycles that drip less oil in your driveway, and in fact in some cases all of the above. But none of that is the point.

What Harley Davidson has is the quintessential essence of the motorcycle. The shape, the outline, rumble in the seat, the wind all around you, the chrome flashing in the noonday sun, the zeitgeist and indeed the very image of the motorcycle is Harley’s stock and trade. Tires, engines, handlebars, spark plugs, tanks, and paint; All of those are mere details afterwards.

When you sit on a Harley, regardless of all else, there is the ineffable sense of occasion. Nothing else is a motorcycle, only this. It is James Dean and Hunter Thompson and Evel Knievel and Danny Trejo and even Clark Gable, and nothing can change that. Not management missteps, not the coddling with kid gloves by the Reagan administration, not even being owned by a bowling pin company; love them or hate them, it’s unlikely anything is going to diminish the legacy of Harley Davidson any time soon.

And so it is, winding our way circuitously back topic, with Benchmade and as it follows the Model 82.

Benchmade certainly didn’t invent the balisong knife — far from it. But a balisong knife is literally where Benchmade began, a fact which they celebrate to this day on the 82’s box and indeed even its blade with their now iconic bali-song logo. With it comes that same sense of occasion, a certain gravitas that’s impossible to quantify but somehow doesn’t come with a balisong from any other maker.

But before you accuse me of being the brochure for this thing, let it not be said that I haven’t been hard on the big B many times myself in the past. Often have I decried the ludicrous list prices on their mainstream models while they stolidly cling to an apparently static lineup while their competitors in many regards cruise right past. Finally being in a position to see things from the other side of the counter myself, so to speak, now I understand. It’s expensive because what goes into it is expensive and getting moreso all the time, especially if you’re still going to make it in America. So I get it, but that doesn’t mean I have to like it.

But some part of that is by the opposite side of the same token something that makes the Model 82, yes, that little bit special. Objectively, perhaps, there is no call in the world just yet for a $650 general purpose pocketknife. But if we were going to be purely objective all the time there would be no call whatsoever for any high end knives at all.

The 82’s drop pointed, stylized, and ventilated blade is made from Magnacut. That’s Larin Thomas’ home grown supersteel and the current state of the art and darling of high end knife steels.

This marks another first for me as well as it’s my first Magnacut knife.

That is to say my first that’s actually made from Magnacut, and not just one that says it is. (That “CLA” there is, I’m very sorry to report, fake as a snake. If the lack of a choil didn’t tip you off already. It’s mechanically impeccable and very interesting, but still fake. Perhaps we’ll discuss it later.)

I have no experience with Magnacut other than what I read. It’s supposed to be the all-singing, all-dancing, does-everything perfectly balanced wunderstooff of, if not the future, certainly this very minute. I’m sure I’ll find out about all that at least a little bit. But probably only a little, because it’s unlikely I’ll use this heavily.

But does it keeeeeel?

Probably. The Model 82 scores respectably for a factory edge out of the box. It’s an unfair comparison as usual, because the Bugout I use as my control has had its edge fanatically hand-polished by yours truly and then used for no purpose whatsoever other than producing these chart figures. The Model 82 has a tumbled stonewashed finish on its blade surface which no doubt introduces a tiny amount of drag, and at 0.104" or 2.64mm in cross section it’s also 20% thicker than the Bugout’s blade. All of these will negatively impact it on my dinkum paper cutting test by its very nature.

For whatever it’s worth I used it to open a pack of Gummi Bears last night and it went through the plastic packaging like it wasn’t even there.

The 82 is a compact number for a balisong, measuring up at 4-3/4" (120.65mm) closed and a whisker under 8-1/4" (209.55mm) open. The blade is 3-5/8" long (92.08mm) from the tips of the handles, but the usable edge starts before a large choil and is about 3-5/16" (84.14mm).

The styling is of course reminiscent of the Model 87 and/or the 85, or perhaps vise-versa, although the 82 is much closer to EDC sized. It has the same channel milled solid billet titanium handles, glaive headed screws, and even the same pattern of slots and holes milled in for lightening. It’s 125.3 grams or 4.42 ounces. With that plus the size, in reality maybe the more obvious comparison is my beloved Model 32 instead.

The 82 would be eminently EDC capable except I’ll bet you wouldn’t actually do it, you chicken. It also lacks a pocket clip, although in its stead you get what is, for lack of a better description, a holster. You may have spotted it nestled in the box above.

It’s either made from Kydex or something moulded very much to look like Kydex. I can’t tell if it’s an injection moulding or simply pressed with some manner of hideously complicated jig. It’s certainly not pressed around your individual knife, as it has distinct clearance and relief areas built into it to facilitate a clean draw without, presumably, scratching up the knife.

It’s got a clip on the back picked out with the Benchmade butterfly logo, and which is obviously intended for a belt and is not a pocket clip per se. It’s hooked over on the end and very highly sprung. There’s a grab tab on the tip of it but flexing it to snap onto your belt while you’re already wearing it is kind of a three handed job. Threading your belt through it is a better bet. The clip seems extremely robust and is just wide enough to clear a 2" pistol belt and even has adjustable retention, which is the sort of thing that’ll surely get any old whacker to pitch his tent.

The clip is folded over the top of the holster and screwed in through the back, which seems like it ought to be a tailor made recipe for scraping and damaging the finish on the handles.

…Except there are a pair of wings formed into the edges of the holster that space it out so it doesn’t touch. You have to be very ham-fisted indeed to shove the 82 into its holster such that it runs the risk of getting scratched.

Which is just as well, because it is an absolute thing of beauty.

The Torx and glaive headed hardware create a cohesive style throughout the entire ensemble. It’s a kicker pin design, so there are no Zen pins to be found in the handles here. But the pins and even the latch head carry the theme.

Squeeze the handles and the latch springs open of its own accord. Spring is the wrong word, though. This puppy is actually magnetic, with a trio of opposed doughnut shaped magnets tucked under the screw heads and on the shank of the latch. When the handles are squeezed far enough for the crosspin in the latch to clear its keyhole shaped home, it’s silently pushed out by magnetic repulsion and kept there proud of the handles and blade so it can’t clash.

The action is faultless. The 82 is a ball bearing pivoter and it’s also extremely rigid. There’s nary a wiggle, no tap, not a rattle to be found anywhere within it. It’s quiet, too, producing only a single understated click with each rebound. It is the polite, distinguished cough of the professional butler, nothing more. Just as you say, sir. Very good, sir.

Originally I was going to take this apart to show you, but I found that the screws were highly threadlockered and mine came from the factory in a perfect state of tune. The screw heads are matted just like the handles, and pristine. Do I really want to sully all of that? I don’t think I do.

The Inevitable Conclusion

I went out to breakfast with my wife the other day and the bill came to just over $50. It wasn’t anything fancy, just diner fare with a menu modification or two. Maybe that puts it all into perspective, these days.

Maybe we really are all headed to hell in a handbasket. Maybe it really was better back when and it’s not just that we remember it so. Cherish the special moments as we find them, then, and recognize them for what they are. They’ll never come around quite the same way again.

So maybe six hundred bucks is a bargain after all. Mere nothing, for the opportunity to hold perfection.

0

Seizing The Means of Production

preview

This is another ad. Since the last time I mentioned this sort of thing it worked so well that you guys cleaned me out completely, let me see if that works again.

So you remember how I said I wasn’t going to let this gig turn into another web development project?

It turned into another web development project.

I just pushed out an update to my website. In light of the debacle last time, vis-a-vis more people buying knives than knives I’ve got, I finally decided it’s time to get off my duff and do the right thing. I mean, if I have to. I guess.

So now I’m a Real Boy. No more dinkum prefabricated credit card form. Inventory tracking, an actual shopping cart system, checkout, it’s got the works. I could rattle on about all the clever things I did to make it work because I’m a colossal nerd and also apparently some kind of special purpose purist who probably belongs in a padded cell rather than anywhere near, say, power tools. For instance, it uses absolutely no Javascript whatsoever. None. Could I? Yes, absolutely. I know Javascript. Did I feel like using it? No. I abused the shit out of the quirks and foibles of CSS instead. And so on, and so forth. I could go on all day about if you let me.

Now if you want to buy more than one thing, you can do that. And it won’t let you buy more than what’s available, to avoid embarrassment on my part and having to send apologetic emails to people with my sombrero gripped pensively in front of me by the brim and all. By the way, for the people in said camp: The steel for your knives arrived today, which was sooner than expected. I’ll be getting back into production in a little bit and then I can actually send you the stuff I owe you. You know, now that I’m done spending two days fighting with integrating with my credit card peoples’ system with their stupid janky incomplete documentation which is exactly the pain in the ass I predicted it would be which is why I didn’t want to do it in the first place.

Ahem.

Where was I?

Oh, yeah. I also have two fancy new colorways for the Adélie for you. Okay, they’re not that fancy, but I still think they look cool. A royal-ish purple and azure blue.

And. And, and, and.

You saw the headline image: I have boxes for them now. Just like everything else I do the boxes are completely bespoke and I make them myself.

Yes, I had a hoot designing these. Some folks who ordered recently have already received earlier revisions but I’ve been keeping mum about it up until now.

Here’s a quick off-the-cuff snap of one of the prototypes. I assemble them with the glue stick that came with my 3D printer. No, I’m serious. Up until now I’ve categorically failed to find a use for it, so I’m just chuffed to pieces about that as well. According to my calculations at the rate I’m using this thing up I predict that in three years I will have to buy a second glue stick. Maybe I’ll upgrade my printer before then and I’ll get another one for free. Hmm.

If we’re honest this is in no small part due to the tiny seedlings of regret that are starting to sprout from my decision to provide my Rockhoppers in bespoke 3D printed cases. These are neat as hell and I love them to bits but each one is a print job that’s just a shade under two hours and that’s really kind of the pits. The Rockhopper is an agonizingly complex multipart printing and assembly operation and I’m mostly bothering to crank them out at all because I love you guys (and for some reason they sell). New colorways for those are coming soon, also. I just… uh… have to print more boxes, which is my bottleneck. And do the photography.

This is turning into a second job.

I have two new real steel knife designs in the works also which will be along at some point. I promise I’ll have shiny new review content in the upcoming days, also. I may have spent some more money. You’ll see.

Dork, out.

This is another ad. Since the last time I mentioned this sort of thing it worked so well that you guys cleaned me out completely, let me see if that works again.

So you remember how I said I wasn’t going to let this gig turn into another web development project?

It turned into another web development project.

I just pushed out an update to my website. In light of the debacle last time, vis-a-vis more people buying knives than knives I’ve got, I finally decided it’s time to get off my duff and do the right thing. I mean, if I have to. I guess.

So now I’m a Real Boy. No more dinkum prefabricated credit card form. Inventory tracking, an actual shopping cart system, checkout, it’s got the works. I could rattle on about all the clever things I did to make it work because I’m a colossal nerd and also apparently some kind of special purpose purist who probably belongs in a padded cell rather than anywhere near, say, power tools. For instance, it uses absolutely no Javascript whatsoever. None. Could I? Yes, absolutely. I know Javascript. Did I feel like using it? No. I abused the shit out of the quirks and foibles of CSS instead. And so on, and so forth. I could go on all day about if you let me.

Now if you want to buy more than one thing, you can do that. And it won’t let you buy more than what’s available, to avoid embarrassment on my part and having to send apologetic emails to people with my sombrero gripped pensively in front of me by the brim and all. By the way, for the people in said camp: The steel for your knives arrived today, which was sooner than expected. I’ll be getting back into production in a little bit and then I can actually send you the stuff I owe you. You know, now that I’m done spending two days fighting with integrating with my credit card peoples’ system with their stupid janky incomplete documentation which is exactly the pain in the ass I predicted it would be which is why I didn’t want to do it in the first place.

Ahem.

Where was I?

Oh, yeah. I also have two fancy new colorways for the Adélie for you. Okay, they’re not that fancy, but I still think they look cool. A royal-ish purple and azure blue.

And. And, and, and.

You saw the headline image: I have boxes for them now. Just like everything else I do the boxes are completely bespoke and I make them myself.

Yes, I had a hoot designing these. Some folks who ordered recently have already received earlier revisions but I’ve been keeping mum about it up until now.

Here’s a quick off-the-cuff snap of one of the prototypes. I assemble them with the glue stick that came with my 3D printer. No, I’m serious. Up until now I’ve categorically failed to find a use for it, so I’m just chuffed to pieces about that as well. According to my calculations at the rate I’m using this thing up I predict that in three years I will have to buy a second glue stick. Maybe I’ll upgrade my printer before then and I’ll get another one for free. Hmm.

If we’re honest this is in no small part due to the tiny seedlings of regret that are starting to sprout from my decision to provide my Rockhoppers in bespoke 3D printed cases. These are neat as hell and I love them to bits but each one is a print job that’s just a shade under two hours and that’s really kind of the pits. The Rockhopper is an agonizingly complex multipart printing and assembly operation and I’m mostly bothering to crank them out at all because I love you guys (and for some reason they sell). New colorways for those are coming soon, also. I just… uh… have to print more boxes, which is my bottleneck. And do the photography.

This is turning into a second job.

I have two new real steel knife designs in the works also which will be along at some point. I promise I’ll have shiny new review content in the upcoming days, also. I may have spent some more money. You’ll see.

Dork, out.

0

Wabi-Sabi [Sold Out!]

preview

These are now sold out! Thank you to everyone!

Original text commences:


I’ve been staring at an empty text box for the last couple of minutes now, wondering how I’m going to start this.

Guys, I kind of messed up.

The other day I set about to make some knives, and in particular I wanted to try a slightly smaller rendition of my previously showcased Emperor using thinner stock and resulting in a marginally lighter weight final product. That seemed like a solid plan. In the hypothetical hierarchy of flightless waddly birds, the king penguin is one notch down in size from the emperor, so I called this one the King… S.

S for slim. Don’t worry; I’ll probably make a couple of fat ones later.

Then I had the brilliant idea to try the same radiused Scandi grind technique as I used to make the last batch of Macaronis, of which there is just one out of four left in stock (hint, hint).

Normal people, professional people, they do this by spending a bunch of dough on a nice solid tilt table for their grinder. I haven’t got one of those. It will probably not surprise you to learn that the beveling jig I used for the Maraconi was one that I developed and 3D printed. That’s fine when your bevel angle is 14° instead of 5° and your work piece is only three inches long instead of ten. I have to say, though, it very nearly worked. But then I encountered rigidity problems. At the polishing phase my platen started to dish. Then my tool rest shook itself loose and wandered out of square without me noticing. And the thing about metal, see, is that once you grind it off you can’t put it back.

In short, I wasted 140 bucks worth of steel producing, in assembly line fashion, three ugly knives. Oh, for sure the third one wound up a bit less ugly than the first one as I tried everything I could think of short of actually purchasing the correct equipment to rescue myself from my mistakes. But I still didn’t quite succeed. One of them I gouged slightly. The other two have noticeable surface imperfections.

Oh well. Is the journey and not the destination, right?

The Japanese have this thing they call “wabi-sabi.” It’s a zen kind of philosophy of appreciating things for their flaws. My own perfectionism drives me towards the goal of wanting to produce a hand made knife that’s as visually perfect and flawless as a commercially machine made one. Which is, once you get right down to it, silly. I can’t find the quote right now but I’m positive it was Terry Pratchett who once wrote that the makers of, for instance, handmade souvenir knick-knacks no matter how skilled downright have to leave the occasional lumps and fingerprints in them or otherwise nobody would believe that they’re hand made. If anybody wanted a geometrically perfect knife I’m sure they could go and buy one from Benchmade or Spyderco or Esse or hell, even the Chinese.

No, this absolutely isn’t a bunch of sour grapes. Perish the thought.

The King is a couple of inches shorter than an Emperor at about 10-5/8" long and half the thickness at 1/8". It’s still D2 that’s tempered for toughness, and I cunningly recycled the exact same handle design so I wouldn’t have to reinvent the wheel. Learn to expect a lot of that sort of thing in the future. There are the same hollow handle bolts that accept cordage and a Kydex sheath for each.

I also printed up a couple of different colors for the handles. I did super thin 0.1mm layers this time which actually make them look and feel really nice. It’s the only part of this entire debacle I’m really happy about.

The red one I’ve already promised to a friend (it’s also the ugliest of the bunch and he won’t care), but the orange and the green one are up for grabs. If you really want a particular color I could also just print it for you. Heck, I have a whole new spool of blue lying around I haven’t even opened yet.

I thought long and hard about this, and ultimately concluded that I can’t sell these for anything approaching my full price. Instead, I’d be happy to break even on materials. So until I manage to get rid of them I have these on my website right now at the fire-sale price of $75 a piece, shipped.

Yes, I just made you read this whole thing and it turns out it’s an ad. I’m sneaky like that.

So do me a favor, will you? Help me get rid of these things.

These are now sold out! Thank you to everyone!

Original text commences:


I’ve been staring at an empty text box for the last couple of minutes now, wondering how I’m going to start this.

Guys, I kind of messed up.

The other day I set about to make some knives, and in particular I wanted to try a slightly smaller rendition of my previously showcased Emperor using thinner stock and resulting in a marginally lighter weight final product. That seemed like a solid plan. In the hypothetical hierarchy of flightless waddly birds, the king penguin is one notch down in size from the emperor, so I called this one the King… S.

S for slim. Don’t worry; I’ll probably make a couple of fat ones later.

Then I had the brilliant idea to try the same radiused Scandi grind technique as I used to make the last batch of Macaronis, of which there is just one out of four left in stock (hint, hint).

Normal people, professional people, they do this by spending a bunch of dough on a nice solid tilt table for their grinder. I haven’t got one of those. It will probably not surprise you to learn that the beveling jig I used for the Maraconi was one that I developed and 3D printed. That’s fine when your bevel angle is 14° instead of 5° and your work piece is only three inches long instead of ten. I have to say, though, it very nearly worked. But then I encountered rigidity problems. At the polishing phase my platen started to dish. Then my tool rest shook itself loose and wandered out of square without me noticing. And the thing about metal, see, is that once you grind it off you can’t put it back.

In short, I wasted 140 bucks worth of steel producing, in assembly line fashion, three ugly knives. Oh, for sure the third one wound up a bit less ugly than the first one as I tried everything I could think of short of actually purchasing the correct equipment to rescue myself from my mistakes. But I still didn’t quite succeed. One of them I gouged slightly. The other two have noticeable surface imperfections.

Oh well. Is the journey and not the destination, right?

The Japanese have this thing they call “wabi-sabi.” It’s a zen kind of philosophy of appreciating things for their flaws. My own perfectionism drives me towards the goal of wanting to produce a hand made knife that’s as visually perfect and flawless as a commercially machine made one. Which is, once you get right down to it, silly. I can’t find the quote right now but I’m positive it was Terry Pratchett who once wrote that the makers of, for instance, handmade souvenir knick-knacks no matter how skilled downright have to leave the occasional lumps and fingerprints in them or otherwise nobody would believe that they’re hand made. If anybody wanted a geometrically perfect knife I’m sure they could go and buy one from Benchmade or Spyderco or Esse or hell, even the Chinese.

No, this absolutely isn’t a bunch of sour grapes. Perish the thought.

The King is a couple of inches shorter than an Emperor at about 10-5/8" long and half the thickness at 1/8". It’s still D2 that’s tempered for toughness, and I cunningly recycled the exact same handle design so I wouldn’t have to reinvent the wheel. Learn to expect a lot of that sort of thing in the future. There are the same hollow handle bolts that accept cordage and a Kydex sheath for each.

I also printed up a couple of different colors for the handles. I did super thin 0.1mm layers this time which actually make them look and feel really nice. It’s the only part of this entire debacle I’m really happy about.

The red one I’ve already promised to a friend (it’s also the ugliest of the bunch and he won’t care), but the orange and the green one are up for grabs. If you really want a particular color I could also just print it for you. Heck, I have a whole new spool of blue lying around I haven’t even opened yet.

I thought long and hard about this, and ultimately concluded that I can’t sell these for anything approaching my full price. Instead, I’d be happy to break even on materials. So until I manage to get rid of them I have these on my website right now at the fire-sale price of $75 a piece, shipped.

Yes, I just made you read this whole thing and it turns out it’s an ad. I’m sneaky like that.

So do me a favor, will you? Help me get rid of these things.

0

Weird Knife Wednesday: Kibagami Genjuro's Toothpick

preview

Transient, the knife

Like cherry blossoms in spring

Vanished from the Earth

I’m back. Did you miss me?

I figure I ought to finally show my face around here now since other people are finally starting to post as well. I’ve been so quiet lately because I’ve been focusing on other things. Making knives rather than buying them, for a start. Possibly sacrilege, I know. Don’t worry, I have several ill-advised recent purchases lined up to write about.

For instance, this. Which I actually bought on a lark a quite while back with the intention of writing about it and never did.

This is the “Japan Design Samurai Style OTF Knife Outdoor Pocket Knives D2 Blade Zinc Aluminum Handle Utility Camping Portable EDC Tools,” apparently inherently plural. I paid a whole $27.87 for this, which is not exactly dirt cheap as far as commodity Chinese cutlery goes but as it turns out you get a pretty good deal for your money with this if it’s the kind of thing you’re after. Well, you did; I dithered too long in putting pen to paper over this, because in the meantime it’s apparently disappeared from the Internet completely as these things tend to do.

All of the above doesn’t exactly roll off of the tongue, either. Portable EDC tools, indeed. So I’m going to call it Kibagami Genjuro’s Toothpick instead.

It’s not difficult to spot the kind of vibe this thing is going for. I, I, I am your tiny samurai; not quite a sword but a switchblade little guy.

If nothing else the Toothpick’s ornamentation is rather a master class in minimalism. The pattern of diamonds and lines is actually much simpler than it appears at first glance, but it’s just enough to let your imagination do all the heavy lifting required to see it as representing the ito wrapping on a katana’s handle. It’s clearly just a casting, as the Toothpick’s handle is made of zinc or some similar potmetal alloy thereof (the blurb claims both aluminum and zinc, which I suppose could be a plausible alloy) but it’s a nice one with clean, defined details and nothing in the way of blemishes visible to the naked eye. It affords a decent grip and feels nice in the hand, too, which is surprising.

It also allows me to present this gratuitous bit of showing off by way of illustration:

Look, if you nerds were laboring under the impression that I am not a truly dyed in the wool weaboo, I don’t know what show you think you’ve been watching all this time.

While we’re capitalizing on opportunities, I’ll take another one to show you that Kigabami-san’s knife here is in fact not the smallest katana adjacent thing I own. That’d be this:

Which I’ve had for decades and I’m certain is meant to be a letter opener. I have no idea where it came from, but I used it to equip this guy…

…Who resides on my credenza and I am surely never going to have a more appropriate moment to show off ever again. (Yes, his obi is made out of black hockey tape. Truly I have brought dishonor to my ancestors. I’ll do something about that some day, but not today. If you can name the origin of the glyph on the scabbard, by the way, I’ll give you a gold star. Go on, you’ll never guess.)

Genjuro’s Toothpick is indeed an out-the-front switchblade, which is far from an unknown commodity coming from the Chinese. Typically, however, you see this sort of thing ruthlessly knocking off some Microtech or Benchmade model or another, complete with counterfeit markings and all. I own a fair few of those, but the Toothpick drew my eye because as far as I can tell it’s a bespoke-ish design that clearly benefits from the experience gained from cranking out all those clones — the glass breaker and clip assembly on the end definitely riffing off of Microtech’s groove, for instance — while nevertheless doing its own thing.

Historically this has not been a recipe for success. The Toothpick, however, manages to be a breath of fresh air in that regard. For what it’s worth it’s also quite possibly the single most spring loaded in/out compact switchblade ever manufactured by the hand of Man, for reasons which we’ll explore later. All in all, I rather like it.

You’ll get no identification help from the packaging. This comes in a plain black box with no maker’s mark, model, or UPC. It is apparently impossible for the Chinese to manufacture an out-the-front switchblade without also pathologically including a webbing buckled nylon pouch, a further clue that this is probably being stamped out at a factory that normally makes counterfeit Microtechs. This is despite the Toothpick self-evidently coming with a perfectly serviceable pocket clip which renders the stupid nylon pouch redundant.

Including the aforementioned glass breaker, the Toothpick is precisely 5" or 127mm long. It’s about 8-3/8" (212.7mm) open with a 3-3/8" (87.7mm) blade. Nearly all of that is usable save for a small choil at the bottom. It’s not terribly thick, just as these things usually go, at 0.086" or 2.19mm. And it is, of course, distinctly upswept with a rounded point. It hasn’t got a kisaki although it would be totally rad if it did. It has got a fuller or, if you must, a blood groove in it, though. Which actually turns out not to be as pointless as you’d think in this case. It purports to be made of D2 which may or may not actually be the case.

It’s not very broad, though: Not including the toggle sticking out the handle body is a slim 0.771" across or 19.58mm. It’s 0.441" or 11.21mm thick, again not including the clip or any other protrusions. The blade itself is 0.478" / 12.14mm wide for basically all of its length, save for up around the point.

The whole shebang is a hefty for its size 4.37 ounces or if you prefer, 123.9 grams. That’s because it possesses the one attribute you should absolutely strive for if you insist on buying a cheap Chinese out-the-front automatic: For all that is holy, do not get one that’s made out of plastic. That’s because the inevitable end of all of those is to crack at the muzzle, whereupon you have an ineffective ballistic knife of the sort that only works once.

Even the Toothpick’s toggle is cast, and that’s a good thing for squeezing as much durability as possible out of the little thing. The clip and glass breaker are steel.

By the way, both it and the clip complete with its tiny lanyard hole in the tail are definitely showing some, ah, let’s call it inspiration from Microtech.

This thing has an aesthetic to uphold, vis-a-vis coming over all katanaesque. So its overall banana quotient is rather high, with its curved blade neatly firing out along a curved track into a similarly curved handle. I have no doubt that if you got your hands on about twenty of these and laid them all out lined up tip to tail they’d add up to form a perfect circle.

Somehow for the cheap bauble that it is, though, it’s remarkably solid. Getting a traditional out-the-front not to have any wiggle in its blade is difficult to nigh on impossible, and for the big brands also typically a very expensive feat to accomplish. The Toothpick’s blade base is very square and at least generously sized, and slots in as nicely as can be expected with the throat on the end of the handle given the materials being used and the fact that there probably isn’t much if any actual precision machine work done anywhere in here. It has a small and noticeable amount of rattle left-to-right, but basically zero fore and aft along the axis of the edge. You’ve got to shake it very hard indeed to get it to make any noise when the blade is out. When it’s closed it doesn’t rattle at all. There also seems to be enough material at the business end that it’s likely to be a very long time before any breakages might occur that’ll find your blade rocketing off into the sunset never to be seen again.

You can, or at least could, get this is black, green, or tan. I actually bought two, a black one and this green one. The black one I’ll keep sealed in its box for now in the delusional hope that it may accrue in value or, more pragmatically, in case I need to loot it for parts in the future to keep this one going. If I’d have known I would have bought a tan one as well and completed the set while I had the chance. Oh well.

I’m astonished at how well this thing is put together. It appears nobody at the factory used a lug wrench to drive any of the screws, either; mine came apart without fuss. Putting it back together, of course, is always a different story with these things.

The glass breaker unscrews easily enough by way of sticking any suitable object through its holes. This reveals that the clip is reversible, since its mounting hole is centered on the tail of the knife and there’s nothing stopping you from sticking it back on facing the other way. It’s also not curved, unlike basically every other component of this knife. So it won’t even look wrong if you do.

A couple of things stand out to me about the Toothpick’s construction which lead me to believe that, against all rationality and expectation, I made the right call in picking this particular model out of the metaphorical hat. I’ve owned and handled any number of cheapo Chinese OTFs over the years that were so ghastly it’d still be a bad deal if somebody paid you to take them away. The Toothpick isn’t one of those.

The handle body is either a hideously complex casting operation I can’t begin to fathom the mechanics of, or it’s got a second machining step in its production. It’s got overhangs, it’s got pockets, it’s got the works. The gate latches are sprung with their tiny hair-thin springs as usual but they’re captive in their places and don’t go pinging off under the furniture the instant you open the thing which I think is the nicest present a cheap Chinese OTF has ever given me.

It also turns out the silly blood groove in the blade isn’t pointless after all. It actually serves as a guide which rides on a pair of rails inside the handle which keeps the edge from ever striking the inside of the body. Even if you shake the thing as hard as you can when the blade is retracted you can’t get it touch. This prevents the Toothpick from being self-dulling, which sounds like a low bar to clear but you might really be amazed.

One other unusual wrinkle I noticed is that the mainspring is under a ridiculous amount of tension all the time, even when the blade is at rest. So much so that it’s a three handed job to keep it in place before you can slap the cover back on it before one or both ends leap off of their own accord, which must provide no end of merriment to the urchins who have to assemble these in the factory. That probably accounts for the vicious amount of force the blade rockets out with every time you flick the switch. The actuation force required is likewise rather absurd. You can consider this tacitly childproof, as youngsters with small hands will probably be unable to muster enough strength to set it off without a couple of years of bushido training first. Needless to say there’s no safety interlock, either, but it’s not like that’d actually be necessary.

The glass breaker terminates in a shiny ball bearing which is theoretically hardened and pressed into place. Whenever a shiny spherical object like this is present it is obligatory that a gratuitous high magnification photo of it must be produced. Don’t blame me; I don’t make the rules.

Also, don’t expect the edge on this thing to be true from the factory and you won’t be disappointed. It’s also not terribly sharp out of the box, for instance utterly failing to complete my usual Post-It note test. I suggest that a contemplative evening spent in the moonlit bamboo grove with your water stones will be in order before you put this into service.

The Inevitable Conclusion

I await with interest the first comment insisting that, acktshully, I should have displayed this with the edge up rather than the edge down in all of these photos in order to be truly authentic and correct.

Well, this thing is about as authentic as a Disneyland animatronic, and it doesn’t balance very well on its spine, anyhow. But, hands up everyone who’s surreptitiously flipped all the fake swords in the daishō behind the counter at your local sushi joint the right way up? Yeah, that’s what I thought.

Transient, the knife

Like cherry blossoms in spring

Vanished from the Earth

I’m back. Did you miss me?

I figure I ought to finally show my face around here now since other people are finally starting to post as well. I’ve been so quiet lately because I’ve been focusing on other things. Making knives rather than buying them, for a start. Possibly sacrilege, I know. Don’t worry, I have several ill-advised recent purchases lined up to write about.

For instance, this. Which I actually bought on a lark a quite while back with the intention of writing about it and never did.

This is the “Japan Design Samurai Style OTF Knife Outdoor Pocket Knives D2 Blade Zinc Aluminum Handle Utility Camping Portable EDC Tools,” apparently inherently plural. I paid a whole $27.87 for this, which is not exactly dirt cheap as far as commodity Chinese cutlery goes but as it turns out you get a pretty good deal for your money with this if it’s the kind of thing you’re after. Well, you did; I dithered too long in putting pen to paper over this, because in the meantime it’s apparently disappeared from the Internet completely as these things tend to do.

All of the above doesn’t exactly roll off of the tongue, either. Portable EDC tools, indeed. So I’m going to call it Kibagami Genjuro’s Toothpick instead.

It’s not difficult to spot the kind of vibe this thing is going for. I, I, I am your tiny samurai; not quite a sword but a switchblade little guy.

If nothing else the Toothpick’s ornamentation is rather a master class in minimalism. The pattern of diamonds and lines is actually much simpler than it appears at first glance, but it’s just enough to let your imagination do all the heavy lifting required to see it as representing the ito wrapping on a katana’s handle. It’s clearly just a casting, as the Toothpick’s handle is made of zinc or some similar potmetal alloy thereof (the blurb claims both aluminum and zinc, which I suppose could be a plausible alloy) but it’s a nice one with clean, defined details and nothing in the way of blemishes visible to the naked eye. It affords a decent grip and feels nice in the hand, too, which is surprising.

It also allows me to present this gratuitous bit of showing off by way of illustration:

Look, if you nerds were laboring under the impression that I am not a truly dyed in the wool weaboo, I don’t know what show you think you’ve been watching all this time.

While we’re capitalizing on opportunities, I’ll take another one to show you that Kigabami-san’s knife here is in fact not the smallest katana adjacent thing I own. That’d be this:

Which I’ve had for decades and I’m certain is meant to be a letter opener. I have no idea where it came from, but I used it to equip this guy…

…Who resides on my credenza and I am surely never going to have a more appropriate moment to show off ever again. (Yes, his obi is made out of black hockey tape. Truly I have brought dishonor to my ancestors. I’ll do something about that some day, but not today. If you can name the origin of the glyph on the scabbard, by the way, I’ll give you a gold star. Go on, you’ll never guess.)

Genjuro’s Toothpick is indeed an out-the-front switchblade, which is far from an unknown commodity coming from the Chinese. Typically, however, you see this sort of thing ruthlessly knocking off some Microtech or Benchmade model or another, complete with counterfeit markings and all. I own a fair few of those, but the Toothpick drew my eye because as far as I can tell it’s a bespoke-ish design that clearly benefits from the experience gained from cranking out all those clones — the glass breaker and clip assembly on the end definitely riffing off of Microtech’s groove, for instance — while nevertheless doing its own thing.

Historically this has not been a recipe for success. The Toothpick, however, manages to be a breath of fresh air in that regard. For what it’s worth it’s also quite possibly the single most spring loaded in/out compact switchblade ever manufactured by the hand of Man, for reasons which we’ll explore later. All in all, I rather like it.

You’ll get no identification help from the packaging. This comes in a plain black box with no maker’s mark, model, or UPC. It is apparently impossible for the Chinese to manufacture an out-the-front switchblade without also pathologically including a webbing buckled nylon pouch, a further clue that this is probably being stamped out at a factory that normally makes counterfeit Microtechs. This is despite the Toothpick self-evidently coming with a perfectly serviceable pocket clip which renders the stupid nylon pouch redundant.

Including the aforementioned glass breaker, the Toothpick is precisely 5" or 127mm long. It’s about 8-3/8" (212.7mm) open with a 3-3/8" (87.7mm) blade. Nearly all of that is usable save for a small choil at the bottom. It’s not terribly thick, just as these things usually go, at 0.086" or 2.19mm. And it is, of course, distinctly upswept with a rounded point. It hasn’t got a kisaki although it would be totally rad if it did. It has got a fuller or, if you must, a blood groove in it, though. Which actually turns out not to be as pointless as you’d think in this case. It purports to be made of D2 which may or may not actually be the case.

It’s not very broad, though: Not including the toggle sticking out the handle body is a slim 0.771" across or 19.58mm. It’s 0.441" or 11.21mm thick, again not including the clip or any other protrusions. The blade itself is 0.478" / 12.14mm wide for basically all of its length, save for up around the point.

The whole shebang is a hefty for its size 4.37 ounces or if you prefer, 123.9 grams. That’s because it possesses the one attribute you should absolutely strive for if you insist on buying a cheap Chinese out-the-front automatic: For all that is holy, do not get one that’s made out of plastic. That’s because the inevitable end of all of those is to crack at the muzzle, whereupon you have an ineffective ballistic knife of the sort that only works once.

Even the Toothpick’s toggle is cast, and that’s a good thing for squeezing as much durability as possible out of the little thing. The clip and glass breaker are steel.

By the way, both it and the clip complete with its tiny lanyard hole in the tail are definitely showing some, ah, let’s call it inspiration from Microtech.

This thing has an aesthetic to uphold, vis-a-vis coming over all katanaesque. So its overall banana quotient is rather high, with its curved blade neatly firing out along a curved track into a similarly curved handle. I have no doubt that if you got your hands on about twenty of these and laid them all out lined up tip to tail they’d add up to form a perfect circle.

Somehow for the cheap bauble that it is, though, it’s remarkably solid. Getting a traditional out-the-front not to have any wiggle in its blade is difficult to nigh on impossible, and for the big brands also typically a very expensive feat to accomplish. The Toothpick’s blade base is very square and at least generously sized, and slots in as nicely as can be expected with the throat on the end of the handle given the materials being used and the fact that there probably isn’t much if any actual precision machine work done anywhere in here. It has a small and noticeable amount of rattle left-to-right, but basically zero fore and aft along the axis of the edge. You’ve got to shake it very hard indeed to get it to make any noise when the blade is out. When it’s closed it doesn’t rattle at all. There also seems to be enough material at the business end that it’s likely to be a very long time before any breakages might occur that’ll find your blade rocketing off into the sunset never to be seen again.

You can, or at least could, get this is black, green, or tan. I actually bought two, a black one and this green one. The black one I’ll keep sealed in its box for now in the delusional hope that it may accrue in value or, more pragmatically, in case I need to loot it for parts in the future to keep this one going. If I’d have known I would have bought a tan one as well and completed the set while I had the chance. Oh well.

I’m astonished at how well this thing is put together. It appears nobody at the factory used a lug wrench to drive any of the screws, either; mine came apart without fuss. Putting it back together, of course, is always a different story with these things.

The glass breaker unscrews easily enough by way of sticking any suitable object through its holes. This reveals that the clip is reversible, since its mounting hole is centered on the tail of the knife and there’s nothing stopping you from sticking it back on facing the other way. It’s also not curved, unlike basically every other component of this knife. So it won’t even look wrong if you do.

A couple of things stand out to me about the Toothpick’s construction which lead me to believe that, against all rationality and expectation, I made the right call in picking this particular model out of the metaphorical hat. I’ve owned and handled any number of cheapo Chinese OTFs over the years that were so ghastly it’d still be a bad deal if somebody paid you to take them away. The Toothpick isn’t one of those.

The handle body is either a hideously complex casting operation I can’t begin to fathom the mechanics of, or it’s got a second machining step in its production. It’s got overhangs, it’s got pockets, it’s got the works. The gate latches are sprung with their tiny hair-thin springs as usual but they’re captive in their places and don’t go pinging off under the furniture the instant you open the thing which I think is the nicest present a cheap Chinese OTF has ever given me.

It also turns out the silly blood groove in the blade isn’t pointless after all. It actually serves as a guide which rides on a pair of rails inside the handle which keeps the edge from ever striking the inside of the body. Even if you shake the thing as hard as you can when the blade is retracted you can’t get it touch. This prevents the Toothpick from being self-dulling, which sounds like a low bar to clear but you might really be amazed.

One other unusual wrinkle I noticed is that the mainspring is under a ridiculous amount of tension all the time, even when the blade is at rest. So much so that it’s a three handed job to keep it in place before you can slap the cover back on it before one or both ends leap off of their own accord, which must provide no end of merriment to the urchins who have to assemble these in the factory. That probably accounts for the vicious amount of force the blade rockets out with every time you flick the switch. The actuation force required is likewise rather absurd. You can consider this tacitly childproof, as youngsters with small hands will probably be unable to muster enough strength to set it off without a couple of years of bushido training first. Needless to say there’s no safety interlock, either, but it’s not like that’d actually be necessary.

The glass breaker terminates in a shiny ball bearing which is theoretically hardened and pressed into place. Whenever a shiny spherical object like this is present it is obligatory that a gratuitous high magnification photo of it must be produced. Don’t blame me; I don’t make the rules.

Also, don’t expect the edge on this thing to be true from the factory and you won’t be disappointed. It’s also not terribly sharp out of the box, for instance utterly failing to complete my usual Post-It note test. I suggest that a contemplative evening spent in the moonlit bamboo grove with your water stones will be in order before you put this into service.

The Inevitable Conclusion

I await with interest the first comment insisting that, acktshully, I should have displayed this with the edge up rather than the edge down in all of these photos in order to be truly authentic and correct.

Well, this thing is about as authentic as a Disneyland animatronic, and it doesn’t balance very well on its spine, anyhow. But, hands up everyone who’s surreptitiously flipped all the fake swords in the daishō behind the counter at your local sushi joint the right way up? Yeah, that’s what I thought.

0

The Civivi Yonder

Civivi Yonder knife with burlap micarta scales sitting on a stump of wood
preview

Well, I had a whole post written up. Bunch of photos. Talked about YouTuber’s designing knives and then PieFed.World just decided “oh here’s an error, how about you lose all that work”

So, I’m not re-writting all of it. Here’s the summary:

This is a great knife. Blade is really thin. Crossbar lock is very well tuned. The burlap micarta is very much burlap micarta. I’ve used it for food prep, made fatwood shavings, cut a bunch of paracord, and reduced boxes to confetti. It’s been very solid. It displaced my previous long term EDC (the CJRB Maximal) for the time being but honestly both of these knives are excellent. You cannot go wrong with either.

If the 2.88" blade is too small for you, there’s a newly released “Over Yonder” with a 3.35" blade that might be to your liking. Same blade thinness, just longer.

Here’s a bunch of photos, including some comparisons to the Maximal.

image

image

image

image

image

image

Well, I had a whole post written up. Bunch of photos. Talked about YouTuber’s designing knives and then PieFed.World just decided “oh here’s an error, how about you lose all that work”

So, I’m not re-writting all of it. Here’s the summary:

This is a great knife. Blade is really thin. Crossbar lock is very well tuned. The burlap micarta is very much burlap micarta. I’ve used it for food prep, made fatwood shavings, cut a bunch of paracord, and reduced boxes to confetti. It’s been very solid. It displaced my previous long term EDC (the CJRB Maximal) for the time being but honestly both of these knives are excellent. You cannot go wrong with either.

If the 2.88" blade is too small for you, there’s a newly released “Over Yonder” with a 3.35" blade that might be to your liking. Same blade thinness, just longer.

Here’s a bunch of photos, including some comparisons to the Maximal.

image

image

image

image

image

image

0

How can I fix this S&W M&P 1100078 knife that gets stuck open?

preview

I got this knife as a gift several years ago, I don’t really use it a whole lot but I do like to take it camping and such. However, on a camping trip a year or so ago, it got stuck open.

There is some little wire loop looking thing that seems to pop out of wherever it’s supposed to be and blocks the thumb unlocker from working. I can take a tiny screwdriver or Allen wrench and poke around in there and pop the thing back into place, and then it works and closes just fine. And it’ll be fine for a few times, opens and closes correctly, but after a handful of times that piece inevitably pops back out again and locks it open.

I’ve tried to use a tiny torx bit to remove the sides to see if I can figure out what’s going on, but the screws just spin. The big screw at the hinge unscrews as expected but all the little ones all act like they’re stripped.

What else can I do? Is there some trick to removing the sides? Any help would be appreciated.

Here’s what it looks like opened correctly with the little piece still wherever it’s supposed to be:

And when the piece pops out and gets stuck:

Somewhat useful red circle if you couldn’t see the problem:

I got this knife as a gift several years ago, I don’t really use it a whole lot but I do like to take it camping and such. However, on a camping trip a year or so ago, it got stuck open.

There is some little wire loop looking thing that seems to pop out of wherever it’s supposed to be and blocks the thumb unlocker from working. I can take a tiny screwdriver or Allen wrench and poke around in there and pop the thing back into place, and then it works and closes just fine. And it’ll be fine for a few times, opens and closes correctly, but after a handful of times that piece inevitably pops back out again and locks it open.

I’ve tried to use a tiny torx bit to remove the sides to see if I can figure out what’s going on, but the screws just spin. The big screw at the hinge unscrews as expected but all the little ones all act like they’re stripped.

What else can I do? Is there some trick to removing the sides? Any help would be appreciated.

Here’s what it looks like opened correctly with the little piece still wherever it’s supposed to be:

And when the piece pops out and gets stuck:

Somewhat useful red circle if you couldn’t see the problem:

0

My first fully left-handed edc pocket knife

preview

Crossposted from slrpnk.net/post/38255937

It is a Kansept Model 6 Left-Handed with liner lock.

For years I have dealt with a right-handed, or “ambidextrous” pocket knife. Like many of you, struggled with and eventually got used to things made for righties, but marketed as “works in either hand” but really is garbage.

The blade shape is not my first choice, and I would rather a thumb knob. But I have always liked liner locks, and anything that met all of my check boxes was over $500. This was $170 from knife center.

It just arrived, so I have not used it much yet.

Crossposted from slrpnk.net/post/38255937

It is a Kansept Model 6 Left-Handed with liner lock.

For years I have dealt with a right-handed, or “ambidextrous” pocket knife. Like many of you, struggled with and eventually got used to things made for righties, but marketed as “works in either hand” but really is garbage.

The blade shape is not my first choice, and I would rather a thumb knob. But I have always liked liner locks, and anything that met all of my check boxes was over $500. This was $170 from knife center.

It just arrived, so I have not used it much yet.

0

My customized Opinel

preview

Made a notch in the handle to make opening the blade easier, burned the handle, and gave the blade an artificial patina with lemon juice. It’s an old knife I don’t use much - just keep it in my bike backpack - but it’s great for carving and food prep thanks to the thin blade.

Made a notch in the handle to make opening the blade easier, burned the handle, and gave the blade an artificial patina with lemon juice. It’s an old knife I don’t use much - just keep it in my bike backpack - but it’s great for carving and food prep thanks to the thin blade.

0

Looking for a fully left-handed edc

preview

The image is my current EDC, it is close to 30 years old. I cannot remember where or when I first got it. I do like the knife, but it is 100% right-handed. The image above shows how far I can open it one-handed before I have to place my thumb on the blade to finish opening it.

I am looking for a knife that is 100% left-handed, not ambidextrous. Those knives always have some part, typically the blade lock, that most be made for either left or right and right always wins.

I would like something with the same kind of blade, minus the serrations. I hate sharpening this thing because of them.

The handle is decently thick, I would like to stick with something like that. I have a Ken onion knife that has a really thin handle and I do not like it.

I would like to keep it under $150, but for the left blade that is negotiable.

The image is my current EDC, it is close to 30 years old. I cannot remember where or when I first got it. I do like the knife, but it is 100% right-handed. The image above shows how far I can open it one-handed before I have to place my thumb on the blade to finish opening it.

I am looking for a knife that is 100% left-handed, not ambidextrous. Those knives always have some part, typically the blade lock, that most be made for either left or right and right always wins.

I would like something with the same kind of blade, minus the serrations. I hate sharpening this thing because of them.

The handle is decently thick, I would like to stick with something like that. I have a Ken onion knife that has a really thin handle and I do not like it.

I would like to keep it under $150, but for the left blade that is negotiable.

0

Summer EDC

preview

I’m generally not a knife whore since I basically carry my Sebenza everyday unless there are reasons not to like camping. I picked this up late this winter when I went looking for something with a reasonable blade length that was also light for the more stretchy lighter weight pants I’ve been wearing.

This is one of the best knives I’ve ever purchased and have half a mind to pick up another just in case

I’m generally not a knife whore since I basically carry my Sebenza everyday unless there are reasons not to like camping. I picked this up late this winter when I went looking for something with a reasonable blade length that was also light for the more stretchy lighter weight pants I’ve been wearing.

This is one of the best knives I’ve ever purchased and have half a mind to pick up another just in case

0

Hightron/Hot Knives Sharplyn: Hot Knives On The Loose

preview

Sometimes you buy knives. Sometimes you have knives thrust upon you. But not, preferably, in the coming-from-a-dark-alley sense. So it was with this, which somebody gave to me a while ago and I’ve been putting off writing about it ever since.

This is the Hot Knives HKO1, which is very much a Chinese knife and thus in the tried and true Chinese tradition is also known as the Hightron Sharplyn, and possibly many other monikers besides. To tell you the truth I was originally just going to put this thing on the knife rack and skip telling you about it entirely, because there is nothing interesting to say about it. Except, as it turns out, there is.

Some say, he has a tattoo of his face… on his face.

All we know is, never before has an ostensibly commodity Chinese product included such a concise depiction of itself on the box. The rear also goes on to state…

…That it is “proudly” made in China. Among the words that have ever been printed in history, these are certainly some of them.

You have already heard my spiel on the general state of Chinese knives many times before. Despite their incredible manufacturing prowess and expertise, by and large it still seems that the only time the Chinese can be bothered to turn out a decent knife is if they’re making it for someone else or, increasingly often these days, they’re cranking out counterfeits or knockoffs of a stolen design. We’re already familiar with the results of when the Chinese try to go it alone in all those wobbly and awful examples festooned with eagles and skulls and pot leaves on display at your friendly local truck stop, flea market, or bong shop. What inroads they could make, I have oft conjectured, if somebody in China could finally see their way clear to manufacturing a bespoke design but, critically, actually doing so with the same care and attention they already apply to ripping others off.

Well, in the case of the Sharplyn insofar as I can tell they have.

Of course you can never leap to conclusions about such a thing so easily. Any time you’re handling what you thought was an original Chinese design it’s often only because you haven’t looked hard enough to discover what the pattern was actually stolen from. And so in what’s now becoming tradition around here I went and plumbed the dusty, petrochemical smelling depths of the Internet once again to try to determine the exact origin of this thing and along the way found a few interesting tidbits.

“Hot Knives” appears to be a sub-brand of Hightron knives, the latter of which being a moniker only slightly less unfortunate than the former, because it gives the impression that rather than cutlery these guys ought to be selling cheap transistor radios and southeast Asian VCRs. Hot Knives seems to be the marquee intended for selling budget stuff on platforms like Amazon, which alas mostly just has the net effect of diverting prospective buyers away from their products and into something else entirely, even if you search for it verbatim.

You know how we usually only get those meaningless robotic search optimized word-salad tiles on these sorts of things? This is like the opposite of that. It’s a bold strategy, maybe. Let’s see if it pays off.

For some reason the Sharplyn is explicitly sold under both the Hightron and Hot Knives brands, with insofar as I can tell no actual difference between them other than how they’re marked and, at least in their OD green incarnations, the shade of green being slightly different. They’re both listed practically adjacent to each other on Hightron’s website, and they’re both even the same list price. But the Hightron version specifically is billed from some sellers as “the lite [sic] version of the Dark Feather by NOC Knives.” That raised my eyebrow.

…The what from the who, now?

NOC Knives is another company that is very, very Chinese. If you hadn’t gathered that from the type of things they sell, their mission statement at the bottom of their home page ought to be a clue:

FOUNDED IN 2017, NOCKNIVES IS A VERY POPULAR KNIFE SUPPLIES COMPANY. The company’s mission is to integrate the design concept of “beyond oneself” into the life of every player. NOCKNIVES is mainly engaged in the design, research and development, manufacturing and sales of high-quality tactical folding knives, and has formed a perfect product layout such as the top mass production series S, the high-end mass production series MT, and the entry-level DG series over the years. At the same time, we also provide OEM services to other top brands in the industry.

Beyond oneself. Uh-huh.

Anyway, I can’t find any hard evidence that NOC and Hightron are the same entity but it sure makes me suspicious. Several of their knives are rather similar to each other, only being significantly less fancy on the Hightron side. It’s likely that Hightron are using NOC as their OEM at minimum, and the Sharplyn is allegedly — if you believe various sellers’ blurbs about it at face value, anyway — a direct collaboration between the two having been designed by NOC in the first place. It even uses their homegrown crossbar lock design which they go so far as to name drop it as an “Axis” lock.

I wonder how Benchmade feels these days now that their innovation has been, ahem, finally fully Xeroxed.

NOC, for their part, display an interesting array of screwball models with a strong predilection for what I can only describe as purple cyberpunk regalia. I dig it. Quite a lot of them are also alarmingly expensive, tempting though they may be. We’ll leave that for later, possibly after I’ve been made rich and famous.

Why anyone should care about this, winding our way circuitously all the way back to the Sharplyn, is because at the moment it’s rather a good deal… provided if and only if you buy two of them.

At the time of writing the OD green version of the Sharplyn is $37.99 which is only a middling deal for an EDC knife from an unproven brand that doesn’t do anything exceptionally novel or strange. But it’s also apparently perpetually the subject of one of Amazon’s buy two, get them 50% off schemes which means it’ll cost you exactly as much for two of them as it’ll cost you for one. So you really may as well. At $19 a pop these are well on their way to being an impulse purchase provided you can find a suitable use for the second one.

I’ll give you three guesses why I wound up with mine, then.

This has evidently been the case for at least three or four months, because that’s how long this thing has been gathering dust on my shelf and that was the deal back then, too. None of that is the real headline about the Sharplyn, though.

The lede I’ve buried is that it’s got a blade made of Sandvik 14C28N, which is a rather good steel for the price. For this kind of money that very easily could have been pokey old 420-something, or 5cr or even 3cr, or AUS-6, or insert-the-name-of-your-least-favorite-steel here. And it isn’t, which is very nearly astonishing. (It would be, if it weren’t also for the existence of things like this.) Among all of the various other ghastly options we could have received, 14C28N is one of the steels specifically formulated to be used for knives, and also holds the distinction of being Larrin Thomas’ self-professed favorite budget knife steel. Already this is shaping up to be a winner.

It’s also got ceramic ball bearing pivots which you’ll see in a moment, the aforementioned Axis-alike lock, and possesses a curiously good build quality. All of this also comes with only minimal obligatory Chinese design deficiencies attached.

This is, then, something that ought to give a lot of traditional knife makers some pause.

The crossbar or Axis lock is of course unmissable. The Sharplyn also has a pivot screw with a stylish driverless head on one side.

The back reveals the only major concession to ineptitude, which is the lack of reversibility on the deep carry pocket clip. Myself, I share the one thing in common with what everyone knows about Inigo Montoya so I don’t particularly care. If you’re a southpaw, however, you will. Everything else about the Sharplyn is ambidextrous including the thumb studs and of course the lock. Just, as usual we’re two screw holes short of nirvana.

Two things stand out about the Sharplyn on the performance side. It’s not that it’s particularly thin’n’light overall, even though Hightron make a bunch of noise about how it ought to be. It’s 80.4 grams or 2.84 ounces, constructed largely of G-10 and in a typically Benchmade-eque tradition lacking full length liners. It’s curiously exactly 7/16" of an inch in thickness across the scales, or 11.12mm, not including the clip or any of the screw heads or anything. The upswept triangular blade is 3-5/8" or 92.08mm long and the sharp part measures up at 3-3/8" or 87.73mm.

None of that is particularly interesting. The blade’s geometry is, though, starting with it being a very thin 1.6mm thick at the spine or about 1/16", and tapering down with a true full flat grind to an unexpectedly sharp cutting edge that certainly helps the thing live up to its name. It’s very reminiscent of the thought process behind quite a few Spyderco models in that regard, only at a small fraction of the price. The spine is also pleasingly rounded off, but they took the time to integrate a thickened portion up near the tip for reinforcement.

We haven’t seen our good friend the sharpness cutting force chart in a while, but here it is. As usual the gold line is my hand sharpened Benchmade Bugout, which serves as a decent enough control as any. The green line is the grams-force sharpness data from the Sharplyn’s factory edge, which glides through paper even more effortlessly. Doubtless this is in some part due to the slender flat ground blade geometry, which provides excellent cutting ability with the tradeoff that you probably oughn’t to twist the blade too much nor try to chop at any excessively sturdy objects with it.

A bushcraft knife this is not, but for the types of package opening, box flattening, rope cutting, fruit slicing tasks you’re more likely to find outside of the woods it’s going to be a stellar contender.

The second thing is the somewhat unique way in which the Sharplyn’s edge hangs down below the lowermost edge of the handle noticeably. If you use just the right grip, this allows you to get the full length of the edge onto a flat surface like this fancy cutting board, here. That sounds humdrum, but it’s actually a remarkably rare property and a difficult thing to do with the majority of pocketknives, which you’ll probably find if you take out the one you’ve got in your pocket right now and try it.

All of this might just make the Sharplyn one of the better options for a field food prep knife if it weren’t for that giant thumb hole in it, which turns out to be superfluous anyway because it’s also got dual thumb studs right behind it.

The Sharplyn looks like it started off with your typical factory-ground edge, but close examination reveals that it seems to have been polished on top of this somehow right down at the very apex, which might explain why it’s so damn sharp out of the box.

The edge is, alas, out of true noticeably in keeping with its ultra budget price point. 14C28N isn’t terribly difficult to sharpen so this shouldn’t be hard to fix, when the time comes. But fix it you shall, at least if you ever want to regain its original scalpel-like sharpness.

I also really could have done without the blade being black PVD coated. 14C28N also ought to be more than corrosion-proof enough for most people, as even Hightron themselves mention in their various blurbs. So it’s undoubtedly there to hide the cheapness of the polishing job on the flat underneath rather than for any protective purpose. It’ll inevitably get scuffed and gouged and get dirt ground into it over time and, as usual, all of that will be categorically impossible to repair or polish out. So cherish yours as it comes out of the box because that’s as pretty as it’ll ever be.

The Sharplyn’s machined G-10 scales are quite nice, though. They’re thick enough to provide plenty of rigidity for everyday use, and are attractive, grippy, and all the other adjectives us reviewers are supposed to use. The shape certainly doesn’t do anything ergonomically special and everything’s a bit angular, which if we’re feeling unusually charitable we might say gives it a bit of a 1980s future punk sort of vibe. There’s a finger notch there wide enough to get two fingers into, and really the only major wart on it is the rather dopey Hot Knives marquee carved into the side opposite the clip. If I were going to be completely cynical I might conjecture that the reason the clip isn’t reversible is only because it would then cover the logo, and the manufacturer certainly couldn’t have that, could they?

If you spring for the Hightron rather than the Hot Knives branded version this is absent and instead the logo is silkscreened onto the clip itself. It’s still not reversible on that one, though. So there goes that theory.

The clip is not especially wide or fancy or even shiny, but it does have the right amount of retention and snap and it allows the Sharplyn to come off of your pocket cleanly and easily. Its mounted down far enough that about 3/8" of the tail of the knife is left sticking out from your pocket, either ruining your concealment or providing you something to grab depending on how you want to look at it. There is no lanyard hole. The mounting end of the clip isn’t recessed, either, but the metal is thin enough that it doesn’t seem to cause any hangup issues. The screws, at least, are countersunk and flush fitting with the clip.

Of all the nitpicks you could fault this thing for, the action is not one of them. Of wiggles, rattles, and creaks there are none. The Sharplyn is ceramic bearing equipped and glides open effortlessly, veritably leaping up as if you’ve just insulted its mother on a daytime talk show. This is regardless of whether you hold the Axis lock back and flip it, or just open with the thumb studs like a normal person.

You can just about see the ball bearings peeking out at you if you look down at the pivot from the end. These are the real deal, in brass carriers and recesses cut out for them and everything.

Inside there are a few things that will appeal to very select types of nerds which are… odd.

The Sharplyn’s Axis/crossbar lock, for instance, is a three piece design which doesn’t screw together but rather consists of a center bar that just sits in there loose and is retained by a shoulder in the hole of each of the nubbins on the sides. The springs hook up to said nubbins and not the crossbar itself.

There aren’t liner plates for the Axis lock per se, but instead this assembly which I think can only be described as a cartridge. It puts one in mind of, say, one of those fancypants drop in trigger assemblies for an AR-15 or something.

The endstop pin is a very tight friction fit which, despite not being shouldered in any way, resolutely holds the entire assembly together such that you can just leave half of it hovering in midair like this. You can swivel it around on the pin and it stays there. I question the wisdom of trying to take it apart further, because it might be a hassle to get it back together again. Because I’m chicken I didn’t try.

All of the screws came out of mine without incident save for two, which were two of the ones that go through the scales into the backspacer and thankfully both of them were on the same side. So I was still able to get the thing apart, but beware. The main pivot screw is very nice, but also curiously lacks an anti-rotation flat despite there being no driver head in the opposite side. Surprisingly it was not so gunked with threadlocker that nuclear weapons were required to undo it.

So the build quality is actually very good for what is at the end of the day a sub-$20 knife. There are a few quirks and foibles, but no showstoppers. And that’s rare.

The Inevitable Conclusion

Axis lock with bearings inside

Sandvik blade, performance implied

Two for one with discounts applied

Hot knives on the loose

Hot knives on the loose

Sometimes you buy knives. Sometimes you have knives thrust upon you. But not, preferably, in the coming-from-a-dark-alley sense. So it was with this, which somebody gave to me a while ago and I’ve been putting off writing about it ever since.

This is the Hot Knives HKO1, which is very much a Chinese knife and thus in the tried and true Chinese tradition is also known as the Hightron Sharplyn, and possibly many other monikers besides. To tell you the truth I was originally just going to put this thing on the knife rack and skip telling you about it entirely, because there is nothing interesting to say about it. Except, as it turns out, there is.

Some say, he has a tattoo of his face… on his face.

All we know is, never before has an ostensibly commodity Chinese product included such a concise depiction of itself on the box. The rear also goes on to state…

…That it is “proudly” made in China. Among the words that have ever been printed in history, these are certainly some of them.

You have already heard my spiel on the general state of Chinese knives many times before. Despite their incredible manufacturing prowess and expertise, by and large it still seems that the only time the Chinese can be bothered to turn out a decent knife is if they’re making it for someone else or, increasingly often these days, they’re cranking out counterfeits or knockoffs of a stolen design. We’re already familiar with the results of when the Chinese try to go it alone in all those wobbly and awful examples festooned with eagles and skulls and pot leaves on display at your friendly local truck stop, flea market, or bong shop. What inroads they could make, I have oft conjectured, if somebody in China could finally see their way clear to manufacturing a bespoke design but, critically, actually doing so with the same care and attention they already apply to ripping others off.

Well, in the case of the Sharplyn insofar as I can tell they have.

Of course you can never leap to conclusions about such a thing so easily. Any time you’re handling what you thought was an original Chinese design it’s often only because you haven’t looked hard enough to discover what the pattern was actually stolen from. And so in what’s now becoming tradition around here I went and plumbed the dusty, petrochemical smelling depths of the Internet once again to try to determine the exact origin of this thing and along the way found a few interesting tidbits.

“Hot Knives” appears to be a sub-brand of Hightron knives, the latter of which being a moniker only slightly less unfortunate than the former, because it gives the impression that rather than cutlery these guys ought to be selling cheap transistor radios and southeast Asian VCRs. Hot Knives seems to be the marquee intended for selling budget stuff on platforms like Amazon, which alas mostly just has the net effect of diverting prospective buyers away from their products and into something else entirely, even if you search for it verbatim.

You know how we usually only get those meaningless robotic search optimized word-salad tiles on these sorts of things? This is like the opposite of that. It’s a bold strategy, maybe. Let’s see if it pays off.

For some reason the Sharplyn is explicitly sold under both the Hightron and Hot Knives brands, with insofar as I can tell no actual difference between them other than how they’re marked and, at least in their OD green incarnations, the shade of green being slightly different. They’re both listed practically adjacent to each other on Hightron’s website, and they’re both even the same list price. But the Hightron version specifically is billed from some sellers as “the lite [sic] version of the Dark Feather by NOC Knives.” That raised my eyebrow.

…The what from the who, now?

NOC Knives is another company that is very, very Chinese. If you hadn’t gathered that from the type of things they sell, their mission statement at the bottom of their home page ought to be a clue:

FOUNDED IN 2017, NOCKNIVES IS A VERY POPULAR KNIFE SUPPLIES COMPANY. The company’s mission is to integrate the design concept of “beyond oneself” into the life of every player. NOCKNIVES is mainly engaged in the design, research and development, manufacturing and sales of high-quality tactical folding knives, and has formed a perfect product layout such as the top mass production series S, the high-end mass production series MT, and the entry-level DG series over the years. At the same time, we also provide OEM services to other top brands in the industry.

Beyond oneself. Uh-huh.

Anyway, I can’t find any hard evidence that NOC and Hightron are the same entity but it sure makes me suspicious. Several of their knives are rather similar to each other, only being significantly less fancy on the Hightron side. It’s likely that Hightron are using NOC as their OEM at minimum, and the Sharplyn is allegedly — if you believe various sellers’ blurbs about it at face value, anyway — a direct collaboration between the two having been designed by NOC in the first place. It even uses their homegrown crossbar lock design which they go so far as to name drop it as an “Axis” lock.

I wonder how Benchmade feels these days now that their innovation has been, ahem, finally fully Xeroxed.

NOC, for their part, display an interesting array of screwball models with a strong predilection for what I can only describe as purple cyberpunk regalia. I dig it. Quite a lot of them are also alarmingly expensive, tempting though they may be. We’ll leave that for later, possibly after I’ve been made rich and famous.

Why anyone should care about this, winding our way circuitously all the way back to the Sharplyn, is because at the moment it’s rather a good deal… provided if and only if you buy two of them.

At the time of writing the OD green version of the Sharplyn is $37.99 which is only a middling deal for an EDC knife from an unproven brand that doesn’t do anything exceptionally novel or strange. But it’s also apparently perpetually the subject of one of Amazon’s buy two, get them 50% off schemes which means it’ll cost you exactly as much for two of them as it’ll cost you for one. So you really may as well. At $19 a pop these are well on their way to being an impulse purchase provided you can find a suitable use for the second one.

I’ll give you three guesses why I wound up with mine, then.

This has evidently been the case for at least three or four months, because that’s how long this thing has been gathering dust on my shelf and that was the deal back then, too. None of that is the real headline about the Sharplyn, though.

The lede I’ve buried is that it’s got a blade made of Sandvik 14C28N, which is a rather good steel for the price. For this kind of money that very easily could have been pokey old 420-something, or 5cr or even 3cr, or AUS-6, or insert-the-name-of-your-least-favorite-steel here. And it isn’t, which is very nearly astonishing. (It would be, if it weren’t also for the existence of things like this.) Among all of the various other ghastly options we could have received, 14C28N is one of the steels specifically formulated to be used for knives, and also holds the distinction of being Larrin Thomas’ self-professed favorite budget knife steel. Already this is shaping up to be a winner.

It’s also got ceramic ball bearing pivots which you’ll see in a moment, the aforementioned Axis-alike lock, and possesses a curiously good build quality. All of this also comes with only minimal obligatory Chinese design deficiencies attached.

This is, then, something that ought to give a lot of traditional knife makers some pause.

The crossbar or Axis lock is of course unmissable. The Sharplyn also has a pivot screw with a stylish driverless head on one side.

The back reveals the only major concession to ineptitude, which is the lack of reversibility on the deep carry pocket clip. Myself, I share the one thing in common with what everyone knows about Inigo Montoya so I don’t particularly care. If you’re a southpaw, however, you will. Everything else about the Sharplyn is ambidextrous including the thumb studs and of course the lock. Just, as usual we’re two screw holes short of nirvana.

Two things stand out about the Sharplyn on the performance side. It’s not that it’s particularly thin’n’light overall, even though Hightron make a bunch of noise about how it ought to be. It’s 80.4 grams or 2.84 ounces, constructed largely of G-10 and in a typically Benchmade-eque tradition lacking full length liners. It’s curiously exactly 7/16" of an inch in thickness across the scales, or 11.12mm, not including the clip or any of the screw heads or anything. The upswept triangular blade is 3-5/8" or 92.08mm long and the sharp part measures up at 3-3/8" or 87.73mm.

None of that is particularly interesting. The blade’s geometry is, though, starting with it being a very thin 1.6mm thick at the spine or about 1/16", and tapering down with a true full flat grind to an unexpectedly sharp cutting edge that certainly helps the thing live up to its name. It’s very reminiscent of the thought process behind quite a few Spyderco models in that regard, only at a small fraction of the price. The spine is also pleasingly rounded off, but they took the time to integrate a thickened portion up near the tip for reinforcement.

We haven’t seen our good friend the sharpness cutting force chart in a while, but here it is. As usual the gold line is my hand sharpened Benchmade Bugout, which serves as a decent enough control as any. The green line is the grams-force sharpness data from the Sharplyn’s factory edge, which glides through paper even more effortlessly. Doubtless this is in some part due to the slender flat ground blade geometry, which provides excellent cutting ability with the tradeoff that you probably oughn’t to twist the blade too much nor try to chop at any excessively sturdy objects with it.

A bushcraft knife this is not, but for the types of package opening, box flattening, rope cutting, fruit slicing tasks you’re more likely to find outside of the woods it’s going to be a stellar contender.

The second thing is the somewhat unique way in which the Sharplyn’s edge hangs down below the lowermost edge of the handle noticeably. If you use just the right grip, this allows you to get the full length of the edge onto a flat surface like this fancy cutting board, here. That sounds humdrum, but it’s actually a remarkably rare property and a difficult thing to do with the majority of pocketknives, which you’ll probably find if you take out the one you’ve got in your pocket right now and try it.

All of this might just make the Sharplyn one of the better options for a field food prep knife if it weren’t for that giant thumb hole in it, which turns out to be superfluous anyway because it’s also got dual thumb studs right behind it.

The Sharplyn looks like it started off with your typical factory-ground edge, but close examination reveals that it seems to have been polished on top of this somehow right down at the very apex, which might explain why it’s so damn sharp out of the box.

The edge is, alas, out of true noticeably in keeping with its ultra budget price point. 14C28N isn’t terribly difficult to sharpen so this shouldn’t be hard to fix, when the time comes. But fix it you shall, at least if you ever want to regain its original scalpel-like sharpness.

I also really could have done without the blade being black PVD coated. 14C28N also ought to be more than corrosion-proof enough for most people, as even Hightron themselves mention in their various blurbs. So it’s undoubtedly there to hide the cheapness of the polishing job on the flat underneath rather than for any protective purpose. It’ll inevitably get scuffed and gouged and get dirt ground into it over time and, as usual, all of that will be categorically impossible to repair or polish out. So cherish yours as it comes out of the box because that’s as pretty as it’ll ever be.

The Sharplyn’s machined G-10 scales are quite nice, though. They’re thick enough to provide plenty of rigidity for everyday use, and are attractive, grippy, and all the other adjectives us reviewers are supposed to use. The shape certainly doesn’t do anything ergonomically special and everything’s a bit angular, which if we’re feeling unusually charitable we might say gives it a bit of a 1980s future punk sort of vibe. There’s a finger notch there wide enough to get two fingers into, and really the only major wart on it is the rather dopey Hot Knives marquee carved into the side opposite the clip. If I were going to be completely cynical I might conjecture that the reason the clip isn’t reversible is only because it would then cover the logo, and the manufacturer certainly couldn’t have that, could they?

If you spring for the Hightron rather than the Hot Knives branded version this is absent and instead the logo is silkscreened onto the clip itself. It’s still not reversible on that one, though. So there goes that theory.

The clip is not especially wide or fancy or even shiny, but it does have the right amount of retention and snap and it allows the Sharplyn to come off of your pocket cleanly and easily. Its mounted down far enough that about 3/8" of the tail of the knife is left sticking out from your pocket, either ruining your concealment or providing you something to grab depending on how you want to look at it. There is no lanyard hole. The mounting end of the clip isn’t recessed, either, but the metal is thin enough that it doesn’t seem to cause any hangup issues. The screws, at least, are countersunk and flush fitting with the clip.

Of all the nitpicks you could fault this thing for, the action is not one of them. Of wiggles, rattles, and creaks there are none. The Sharplyn is ceramic bearing equipped and glides open effortlessly, veritably leaping up as if you’ve just insulted its mother on a daytime talk show. This is regardless of whether you hold the Axis lock back and flip it, or just open with the thumb studs like a normal person.

You can just about see the ball bearings peeking out at you if you look down at the pivot from the end. These are the real deal, in brass carriers and recesses cut out for them and everything.

Inside there are a few things that will appeal to very select types of nerds which are… odd.

The Sharplyn’s Axis/crossbar lock, for instance, is a three piece design which doesn’t screw together but rather consists of a center bar that just sits in there loose and is retained by a shoulder in the hole of each of the nubbins on the sides. The springs hook up to said nubbins and not the crossbar itself.

There aren’t liner plates for the Axis lock per se, but instead this assembly which I think can only be described as a cartridge. It puts one in mind of, say, one of those fancypants drop in trigger assemblies for an AR-15 or something.

The endstop pin is a very tight friction fit which, despite not being shouldered in any way, resolutely holds the entire assembly together such that you can just leave half of it hovering in midair like this. You can swivel it around on the pin and it stays there. I question the wisdom of trying to take it apart further, because it might be a hassle to get it back together again. Because I’m chicken I didn’t try.

All of the screws came out of mine without incident save for two, which were two of the ones that go through the scales into the backspacer and thankfully both of them were on the same side. So I was still able to get the thing apart, but beware. The main pivot screw is very nice, but also curiously lacks an anti-rotation flat despite there being no driver head in the opposite side. Surprisingly it was not so gunked with threadlocker that nuclear weapons were required to undo it.

So the build quality is actually very good for what is at the end of the day a sub-$20 knife. There are a few quirks and foibles, but no showstoppers. And that’s rare.

The Inevitable Conclusion

Axis lock with bearings inside

Sandvik blade, performance implied

Two for one with discounts applied

Hot knives on the loose

Hot knives on the loose