#fahrrad

posts tagged #fahrrad

0

Autofahrer attackierte Radfahrer: 14 Monate Haft

preview

Irrwitzige Argumentation des Verteidigers in dem Video zu sehen. Sinngemäß: Es sei eine Provokation wenn man mit dem Rad fährt und nicht ständig Platz macht.

Irrwitzige Argumentation des Verteidigers in dem Video zu sehen. Sinngemäß: Es sei eine Provokation wenn man mit dem Rad fährt und nicht ständig Platz macht.

0

Fahrradparkhäuser für Berlin: Hier könnte bald ihr Fahrrad stehen

taz.de Fahrradparkhäuser für Berlin: Hier könnte bald ihr Fahrrad stehen taz.de
preview

Ende des Jahres sollte Berlins erstes Fahrradparkhaus stehen, nun verzögert es sich wieder. Das steht exemplarisch für den Umgang der Politik mit dem Thema.

Ende des Jahres sollte Berlins erstes Fahrradparkhaus stehen, nun verzögert es sich wieder. Das steht exemplarisch für den Umgang der Politik mit dem Thema.

0

Neues Scan-Auto überwacht Radfahrstreifen und Schutzstreifen in Düsseldorf

Neues Scan-Auto überwacht Radfahrstreifen und Schutzstreifen in Düsseldorf www1.wdr.de
preview

cross-posted from: feddit.org/post/37885717

Das Scanfahrzeug fährt normal durch die Straßen. Die auf dem Dach installierte Kamera fotografiert automatisch, wenn sie ein falsch abgestelltes Auto entdeckt. Das Foto wird an den Innendienst geschickt. Dort schaut ein Mensch darauf, bevor das Knöllchen rausgeht. Nach Angaben der Stadt kostet ein Verstoß 55 Euro.

Noch ist es in Düsseldorf ein Pilotprojekt - das erste dieser Art in NRW. Bei Erfolg soll das Scanfahrzeug dauerhaft Falschparker suchen und finden.

cross-posted from: feddit.org/post/37885717

Das Scanfahrzeug fährt normal durch die Straßen. Die auf dem Dach installierte Kamera fotografiert automatisch, wenn sie ein falsch abgestelltes Auto entdeckt. Das Foto wird an den Innendienst geschickt. Dort schaut ein Mensch darauf, bevor das Knöllchen rausgeht. Nach Angaben der Stadt kostet ein Verstoß 55 Euro.

Noch ist es in Düsseldorf ein Pilotprojekt - das erste dieser Art in NRW. Bei Erfolg soll das Scanfahrzeug dauerhaft Falschparker suchen und finden.

0

Building a bike from "scratch" - part 2

preview

cross-posted from: feddit.org/post/36603267

This is part 2, check out part 1 first!

Building

I expected this to be easier (or at least more fun) than the buying process, but sadly it was mostly very annoying. In particular because it turned into another shopping experience, and a worse one for that matter.

The parts

Other than the frame, the groupset seems most relevant here. I opted for a non-electric Shimano 105. Thought about going electric and maybe even Chinese OEM as well here, but it didn’t seem like the right thing for me. Biking is primarily leisure time fun, and I don’t want to mess with another app and think about charging batteries when I’m getting ready to ride. Rather I’ll be turning some screws and fiddle with my shifter for a bit. For the wheels I got TPU tubes from RideNow and Continental Grand Prix 5000S (30 wide). Both with no deeper knowledge, but just based on a good review or two I had seen online.

That’s it for the obvious parts (from my POV). My groupset order did not come with discs (which I could have deduced from the images), so I got some 160mm ones. It did not come with sleeves for shifter cables either. And my frame could only handle 140 discs in the rear by default, so I had to get an adapter (now while writing this I’m wondering: Do bikes usually come with smaller rear disks? Some do, some run an adapter. I just checked… ). All of these things I realized when trying to assemble, which got frustrating really quick. I had to stop every time and start ordering AGAIN. I don’t blame anyone but myself for not checking my orders better, but this made for a very unpleasant building experience. And that was only half of the annoyance…

The tools

You will have heard about the EUs push towards unified cables for electronic hardware producers. They should look into bike parts next if you ask me!

I knew ahead of time, that I would need a tool for the Shimano centerlock and the bottom bracket. I managed to order 3 wrong tools for the bottom bracket and the wrong centerlock tool. Naive me just counted the notches on the bottom bracket and ordered the first bottom bracket tool with “Shimano” somewhere in the description. I’ll spare you the details, but to get the right one I measured across my bottom bracket and then checked the manufacturers site to find infos about the diameters (shops did not really list these). Just like with the parts, this stopped me in my tracks multiple times and was very unpleasant. Also you might want 1 or 2 torque wrenches, some grease, carbon assembly paste, oil and a bleeding kit for the break lines (which also didn’t fit the first time). Some of this I already had, but now I almost feel like a bike shop. Still I’m 100% certain, that the three bottom bracket tools I now own will not be sufficient to service the next bike rolling into my “shop”.

bike tools

The assembly

With the right tools (and parts) at hand, the actual assembly was mostly straight forward. Getting the cables and break lines into the handlebars was a proper pain though. Other than that: Apply the proper torque, mind the directions, grease up a little and listen to your gut. If something sounds, feels or looks wrong, it probably is. Take a step back and think for a minute. A quick internet search will likely help you in finding everything you would want to know.

Even though the mechanical shifting was a concious and deliberate choice, I’m still convinced: Adjusting your gears properly is sorcery. I spent quite some time on it, the bike strapped up in my power rack, youtube videos left an right. Then I did some more adjusting while out on the road and that’s were it finally felt like I achieved something decent. Cheers to the two fellow bikers who stopped while I was fiddling with my bike and asked if everything was all right!

Resume

I did not enjoy this project very much. And this has nothing to do with the ordering or the OEM frame. But the special tooling and all the tiny bits and bobs is what really got me. With many other projects, I feel like you can work around lacking tools or material. But in particular the wrenches and nuts are just so specialized (and I didn’t want to attack my new gear with a pipe wrench), that I just had to get more and more stuff. Also it didn’t help that I’m impatient and apparently bad at reading. When ordering parts and tools, just take some time. This would have saved me at least some of the pain. All the proprietary wrenches and fittings should still be forbidden though.

Now don’t get me wrong: I’m glad I did this and I’m very happy with the result. The frame, the wheels, the paint job - everything there worked out like I imagined and I would order one again. I really love the frame! I’m also happy with all the new knowledge and tools, which will help me maintain my bikes in the future. Like bleeding the breaks or changing the bottom bracket was nothing I had done before, and this just pushed me to do it (it’s not hard btw). But I guess I had this romantic image in my head where the frame arrived and then I just assemble it in one or two days and then get to go on a ride. Which maybe could have happened, if I had spent more time on checking what I needed. Anyhow: frame good, ordering good, bike tooling and bike parts bad.

the bike

The money

This will be split into two parts:

  • Cost of the bike
  • Everything I actually got/had to get

In neither case I went hunting for the best price or product for that matter.

Cost of the bike

Money that went into making this a functional, rideable bike.

  • Light carbon order: ~1.490 €, split up into:
    • Frame, handlebars, seat post, bottom bracket: 840€
    • Carbon wheels: 320€
    • Bottle cages: 26€
    • Shipping and fees: 300€
  • 105 group set: 430€
  • Discs + spacer + pads: 100€
  • Tubes: 8€
  • Tires: 92€
  • Handlebar tape: 8€
  • Pre waxed Chain: 36€
  • Outer shifting cable: 10€

Makes ~2200€ in total. I had a saddle and pedals at hand, so consider this, but these would not come with a store bought bike either…

Cost of building the bike

This will be everything I had to get, to go from “doing some maintenance on a gravel bike” to “assembling a bike”.

  • Chain pliers: 10€
  • Chain wrench: 32€
  • Bleed kit & oil: 32€
  • Centerlock tool: 20€
  • 3* bottom bracket tool: ~100€
  • Carbon paste: 10€

So at least 200€ more, while all of these could have been borrowed. The torque wrench I had gotten (a little ahead of time) would almost double that, since I’m seemingly unable to go cheap. The second torque wrench is a friends. This really is individual and mostly relevant to myself.

Was it worth it?

This is hard to judge, since this bike does not exist on the market. So I started thinking about it this way:

  • Would I have gotten a road bike, if not building it? Yes. Maybe not this year, but within the next 1-3 years for sure.
  • Would I have least a bike? No. I believe in owning stuff, and my job doesn’t offer it anyway.
  • How much would I have spent on a bike? I’m in love with the Canyon Aeroad ever since I saw it, which ain’t cheap.

I don’t think I would have dropped 4-8k on an Aeroad, even used they are a little too pricey for me atm. Also, even when not considering differences in frame and wheels (that I can’t judge), I have cheaper components than any version of the Aeroad. That said, I have a hard time finding a carbon frame (and wheels) for around 2k new. So I like to imagine that I did indeed save some money (not billing my time ofc). A highly subjective verdict obviously.

If you are looking for guidance and the above is not enough: I would not recommend doing this for your first bike. Rather get a “complete” bike, go out riding, enjoy summer, learn something about bikes first. If you already have a bike, some tools, friends with tools, an open bike shop close by, this might be something for you. You can learn a lot, and I feel a lot more confident in maintaining bikes now.

cross-posted from: feddit.org/post/36603267

This is part 2, check out part 1 first!

Building

I expected this to be easier (or at least more fun) than the buying process, but sadly it was mostly very annoying. In particular because it turned into another shopping experience, and a worse one for that matter.

The parts

Other than the frame, the groupset seems most relevant here. I opted for a non-electric Shimano 105. Thought about going electric and maybe even Chinese OEM as well here, but it didn’t seem like the right thing for me. Biking is primarily leisure time fun, and I don’t want to mess with another app and think about charging batteries when I’m getting ready to ride. Rather I’ll be turning some screws and fiddle with my shifter for a bit. For the wheels I got TPU tubes from RideNow and Continental Grand Prix 5000S (30 wide). Both with no deeper knowledge, but just based on a good review or two I had seen online.

That’s it for the obvious parts (from my POV). My groupset order did not come with discs (which I could have deduced from the images), so I got some 160mm ones. It did not come with sleeves for shifter cables either. And my frame could only handle 140 discs in the rear by default, so I had to get an adapter (now while writing this I’m wondering: Do bikes usually come with smaller rear disks? Some do, some run an adapter. I just checked… ). All of these things I realized when trying to assemble, which got frustrating really quick. I had to stop every time and start ordering AGAIN. I don’t blame anyone but myself for not checking my orders better, but this made for a very unpleasant building experience. And that was only half of the annoyance…

The tools

You will have heard about the EUs push towards unified cables for electronic hardware producers. They should look into bike parts next if you ask me!

I knew ahead of time, that I would need a tool for the Shimano centerlock and the bottom bracket. I managed to order 3 wrong tools for the bottom bracket and the wrong centerlock tool. Naive me just counted the notches on the bottom bracket and ordered the first bottom bracket tool with “Shimano” somewhere in the description. I’ll spare you the details, but to get the right one I measured across my bottom bracket and then checked the manufacturers site to find infos about the diameters (shops did not really list these). Just like with the parts, this stopped me in my tracks multiple times and was very unpleasant. Also you might want 1 or 2 torque wrenches, some grease, carbon assembly paste, oil and a bleeding kit for the break lines (which also didn’t fit the first time). Some of this I already had, but now I almost feel like a bike shop. Still I’m 100% certain, that the three bottom bracket tools I now own will not be sufficient to service the next bike rolling into my “shop”.

bike tools

The assembly

With the right tools (and parts) at hand, the actual assembly was mostly straight forward. Getting the cables and break lines into the handlebars was a proper pain though. Other than that: Apply the proper torque, mind the directions, grease up a little and listen to your gut. If something sounds, feels or looks wrong, it probably is. Take a step back and think for a minute. A quick internet search will likely help you in finding everything you would want to know.

Even though the mechanical shifting was a concious and deliberate choice, I’m still convinced: Adjusting your gears properly is sorcery. I spent quite some time on it, the bike strapped up in my power rack, youtube videos left an right. Then I did some more adjusting while out on the road and that’s were it finally felt like I achieved something decent. Cheers to the two fellow bikers who stopped while I was fiddling with my bike and asked if everything was all right!

Resume

I did not enjoy this project very much. And this has nothing to do with the ordering or the OEM frame. But the special tooling and all the tiny bits and bobs is what really got me. With many other projects, I feel like you can work around lacking tools or material. But in particular the wrenches and nuts are just so specialized (and I didn’t want to attack my new gear with a pipe wrench), that I just had to get more and more stuff. Also it didn’t help that I’m impatient and apparently bad at reading. When ordering parts and tools, just take some time. This would have saved me at least some of the pain. All the proprietary wrenches and fittings should still be forbidden though.

Now don’t get me wrong: I’m glad I did this and I’m very happy with the result. The frame, the wheels, the paint job - everything there worked out like I imagined and I would order one again. I really love the frame! I’m also happy with all the new knowledge and tools, which will help me maintain my bikes in the future. Like bleeding the breaks or changing the bottom bracket was nothing I had done before, and this just pushed me to do it (it’s not hard btw). But I guess I had this romantic image in my head where the frame arrived and then I just assemble it in one or two days and then get to go on a ride. Which maybe could have happened, if I had spent more time on checking what I needed. Anyhow: frame good, ordering good, bike tooling and bike parts bad.

the bike

The money

This will be split into two parts:

  • Cost of the bike
  • Everything I actually got/had to get

In neither case I went hunting for the best price or product for that matter.

Cost of the bike

Money that went into making this a functional, rideable bike.

  • Light carbon order: ~1.490 €, split up into:
    • Frame, handlebars, seat post, bottom bracket: 840€
    • Carbon wheels: 320€
    • Bottle cages: 26€
    • Shipping and fees: 300€
  • 105 group set: 430€
  • Discs + spacer + pads: 100€
  • Tubes: 8€
  • Tires: 92€
  • Handlebar tape: 8€
  • Pre waxed Chain: 36€
  • Outer shifting cable: 10€

Makes ~2200€ in total. I had a saddle and pedals at hand, so consider this, but these would not come with a store bought bike either…

Cost of building the bike

This will be everything I had to get, to go from “doing some maintenance on a gravel bike” to “assembling a bike”.

  • Chain pliers: 10€
  • Chain wrench: 32€
  • Bleed kit & oil: 32€
  • Centerlock tool: 20€
  • 3* bottom bracket tool: ~100€
  • Carbon paste: 10€

So at least 200€ more, while all of these could have been borrowed. The torque wrench I had gotten (a little ahead of time) would almost double that, since I’m seemingly unable to go cheap. The second torque wrench is a friends. This really is individual and mostly relevant to myself.

Was it worth it?

This is hard to judge, since this bike does not exist on the market. So I started thinking about it this way:

  • Would I have gotten a road bike, if not building it? Yes. Maybe not this year, but within the next 1-3 years for sure.
  • Would I have least a bike? No. I believe in owning stuff, and my job doesn’t offer it anyway.
  • How much would I have spent on a bike? I’m in love with the Canyon Aeroad ever since I saw it, which ain’t cheap.

I don’t think I would have dropped 4-8k on an Aeroad, even used they are a little too pricey for me atm. Also, even when not considering differences in frame and wheels (that I can’t judge), I have cheaper components than any version of the Aeroad. That said, I have a hard time finding a carbon frame (and wheels) for around 2k new. So I like to imagine that I did indeed save some money (not billing my time ofc). A highly subjective verdict obviously.

If you are looking for guidance and the above is not enough: I would not recommend doing this for your first bike. Rather get a “complete” bike, go out riding, enjoy summer, learn something about bikes first. If you already have a bike, some tools, friends with tools, an open bike shop close by, this might be something for you. You can learn a lot, and I feel a lot more confident in maintaining bikes now.

0

Radfahren im Hönnetal nur mit Polizeischutz sicher

Lebensgefahr im Hönnetal: Diese Demo für einen Radweg braucht Polizeischutz www1.wdr.de
preview

cross-posted from: feddit.org/post/36288078

450 Radfahrer tun an diesem Sonntag etwas, was sie sich sonst nicht trauen. Sie fahren durchs Hönnetal und demonstrieren so für einen Radweg.
…

cross-posted from: feddit.org/post/36288078

450 Radfahrer tun an diesem Sonntag etwas, was sie sich sonst nicht trauen. Sie fahren durchs Hönnetal und demonstrieren so für einen Radweg.
…

0

Kaufentscheidungshilfe zum Familienrad

preview

Salut liebe Radler. Ich zermartere mir seit Wochen den Kopf weil ich das “beste” Rad für unsere Situation suche, aber das Budget leider auch begrenzt ist.

Die Situation: Wir leben in der Stadt, haben drei (kleine) Kinder und kein Auto. Bis vor kurzem sind wir ein Multitinker von R-M und ein i:SY N3.8 mit Hänger gefahren. Die Räder waren allerdings über meinen nun alten Arbeitgeber geleased und das Leasing noch nicht rum. Nun habe ich aus Gründen den Job gewechselt, musste aber beide Räder abgeben. Beim neuen Job kann ich ein Rad nach Ende der Probezeit leasen. Also wollen wir für eine Grundmobilität ein Fahrrad kaufen.

Die Anforderungen:

  • Wir wollen weiterhin Kompaktrad, also mit 20"Rädern fahren. Kompakträder sind für uns geeigneter wenn verschiedene Menschen das Rad fahren und liegen durch den tieferen Schwerpunkt unter viel Last sicherer auf der Straße.
  • Riemenantrieb. Das Fahrrad wird das ganze Jahr jeden Tag bei jedem Wetter gefahren. Ich kann mir zwar vornehmen immer vorbildlich die Kette zu reinigen, aber wenn ich ehrlich bin wird das gerade im Winter im Familienalltag vermutlich recht bald dazu führen dass sie rostet.
  • Genug Unterstützung. Unser altes i:SY hatte 75 Nm, das war grad gut genug um den Anhänger mit den beiden Größeren den Berg rauf (~100hm) in den Kindergarten zu ziehen.

Nun find ich dieses Rad recht attraktiv: faltraddepot.de/…/i-sy-n3-8-zr-cx-auto-comfort-ha…

Ich kann allerdings nicht einschätzen wie praktikabel die Automatiq-Schaltung bei vielen Höhenmetern sein wird… Der Motor gefällt mir allerdings und der Akku ist ordentlich.

Unser lokaler Fahrradhändler hat mir allerdings auch auch ein i:SY von 2023/24 (neu) mit Rohloff-Schaltung für 3.999€ angeboten. Das hat allerdings “nur” einen 545 Wh Akku, aber immerhin auch den Performance Line CX Motor mit 85 Nm.

Beim lokalen Händler zu kaufen fände ich schon besser als bei irgendnem random online Händler. Aber ich weiß nicht wie gut meiner Partnerin die Rohloff taugen würde. 4.000€ wären meine absolute Schmerzgrenze, ich wollte ursprünglich eigentlich irgendwo um die 3.000€ landen aber das scheint bei den Anforderungen unrealistisch zu sein.

Hat sonst noch jemand Ideen welche ich vielleicht einfach komplett übersehen habe? Erfahrung mit der Automatiq im Gelände oder vielleicht mit besagtem Online-Händler? Bin über jeden Input froh :)

Vielen Dank fürs Lesen und Frohes Radeln

Salut liebe Radler. Ich zermartere mir seit Wochen den Kopf weil ich das “beste” Rad für unsere Situation suche, aber das Budget leider auch begrenzt ist.

Die Situation: Wir leben in der Stadt, haben drei (kleine) Kinder und kein Auto. Bis vor kurzem sind wir ein Multitinker von R-M und ein i:SY N3.8 mit Hänger gefahren. Die Räder waren allerdings über meinen nun alten Arbeitgeber geleased und das Leasing noch nicht rum. Nun habe ich aus Gründen den Job gewechselt, musste aber beide Räder abgeben. Beim neuen Job kann ich ein Rad nach Ende der Probezeit leasen. Also wollen wir für eine Grundmobilität ein Fahrrad kaufen.

Die Anforderungen:

  • Wir wollen weiterhin Kompaktrad, also mit 20"Rädern fahren. Kompakträder sind für uns geeigneter wenn verschiedene Menschen das Rad fahren und liegen durch den tieferen Schwerpunkt unter viel Last sicherer auf der Straße.
  • Riemenantrieb. Das Fahrrad wird das ganze Jahr jeden Tag bei jedem Wetter gefahren. Ich kann mir zwar vornehmen immer vorbildlich die Kette zu reinigen, aber wenn ich ehrlich bin wird das gerade im Winter im Familienalltag vermutlich recht bald dazu führen dass sie rostet.
  • Genug Unterstützung. Unser altes i:SY hatte 75 Nm, das war grad gut genug um den Anhänger mit den beiden Größeren den Berg rauf (~100hm) in den Kindergarten zu ziehen.

Nun find ich dieses Rad recht attraktiv: faltraddepot.de/…/i-sy-n3-8-zr-cx-auto-comfort-ha…

Ich kann allerdings nicht einschätzen wie praktikabel die Automatiq-Schaltung bei vielen Höhenmetern sein wird… Der Motor gefällt mir allerdings und der Akku ist ordentlich.

Unser lokaler Fahrradhändler hat mir allerdings auch auch ein i:SY von 2023/24 (neu) mit Rohloff-Schaltung für 3.999€ angeboten. Das hat allerdings “nur” einen 545 Wh Akku, aber immerhin auch den Performance Line CX Motor mit 85 Nm.

Beim lokalen Händler zu kaufen fände ich schon besser als bei irgendnem random online Händler. Aber ich weiß nicht wie gut meiner Partnerin die Rohloff taugen würde. 4.000€ wären meine absolute Schmerzgrenze, ich wollte ursprünglich eigentlich irgendwo um die 3.000€ landen aber das scheint bei den Anforderungen unrealistisch zu sein.

Hat sonst noch jemand Ideen welche ich vielleicht einfach komplett übersehen habe? Erfahrung mit der Automatiq im Gelände oder vielleicht mit besagtem Online-Händler? Bin über jeden Input froh :)

Vielen Dank fürs Lesen und Frohes Radeln

0

Die Frage nach dem Schloss

preview

Hallo ihr Strampler,

Mein 12 Jahre altes Mountain Bike wurde vor einem Monat geklaut während wir 15m entfernt im Außenbereich von einem Restaurant saßen. Zugegeben, das Schloss war kein gutes, dafür aber erwartbar so viel leichter als die fetten Bügel und Gelenkdinger von Abus, Kryptonite oder wie die sonst so heißen. Und irgendwie dachte ich, dass mein altes Cube keinen so großen Appeal an die Langfinner hätte. Lag ich wohl falsch :(

Jetzt macht der Laden um die Ecke mein erstes Gravelbike fertig und ich frage mich, wie ihr das mit dem anschließen macht. Diesmal gibts übers Jobrad eine Versicherung und zu Hause / auf der Arbeit kann ich das Rad einschließen. Aber was ist mit den Ausflügen, dem Einkauf oder dem Freunde treffen?

Hätte gern eure Expertise welche Art von Schloss sich gut eignet für Berlin und ein ~1400€ Rad. Habe in meiner Recherche am ehesten auf die winzigen Bügelschlösser geschielt. Macht sicher keinen Spaß, die perfekte Stelle zu finden um damit das Rad anzuschließen, dann wiegen die aber wenigstens keine 2,5kg.

Sagt gerne was ihr von dem Plan haltet oder ob ihr mir was ganz anderes empfehlt.

Hallo ihr Strampler,

Mein 12 Jahre altes Mountain Bike wurde vor einem Monat geklaut während wir 15m entfernt im Außenbereich von einem Restaurant saßen. Zugegeben, das Schloss war kein gutes, dafür aber erwartbar so viel leichter als die fetten Bügel und Gelenkdinger von Abus, Kryptonite oder wie die sonst so heißen. Und irgendwie dachte ich, dass mein altes Cube keinen so großen Appeal an die Langfinner hätte. Lag ich wohl falsch :(

Jetzt macht der Laden um die Ecke mein erstes Gravelbike fertig und ich frage mich, wie ihr das mit dem anschließen macht. Diesmal gibts übers Jobrad eine Versicherung und zu Hause / auf der Arbeit kann ich das Rad einschließen. Aber was ist mit den Ausflügen, dem Einkauf oder dem Freunde treffen?

Hätte gern eure Expertise welche Art von Schloss sich gut eignet für Berlin und ein ~1400€ Rad. Habe in meiner Recherche am ehesten auf die winzigen Bügelschlösser geschielt. Macht sicher keinen Spaß, die perfekte Stelle zu finden um damit das Rad anzuschließen, dann wiegen die aber wenigstens keine 2,5kg.

Sagt gerne was ihr von dem Plan haltet oder ob ihr mir was ganz anderes empfehlt.

0

Building a bike from "scratch" - part 1

preview

cross-posted from: feddit.org/post/36017235

March 2026 I watched a video about bike frames from China, or rather: Chinese OEM (frames). It is in German, but talks about how Chinese biking equipment brands are trying to establish themselves, rather than just producing for others. So, with a like for crafting, making, building and biking, I started the journey of building a bike around a carbon frame from a Chinese OEM.

Disclaimer

  • I’m not qualified for any deeper quality insights other than the “look and feel” of things.
  • While I learned a few things from maintaining my gravel bike, I’m no professional in working with bikes.
  • I did not do any price comparisons ahead of time, but will try to give one at the end. Everything was paid for by myself. This is purely a fun and passion project (including the write up).
  • This is about the buying/ordering of things, Part 2 will be the build

The ordering

Unable to get the video out of my head, I did more and more digging. And everything I found seemed so positiv! So much so, that I actually started the buying process of a frame. And a process it was! Where you would expect a price tag on the website and a button for adding a component to the cart, there is an email address. And I don’t know if it’s like that for all manufacturers, but it was for the two or three I checked. And to me, this seemed super weird! If not for all the positive experiences online, I would have stopped right there.

Start of April I sent a mail regarding a frame I liked, starting a conversation that would end with me buying a frame and a set of wheels. With the time zone difference it was mostly one mail per day, but for the next few days and weeks, all my questions got answered, we figured out what was required, what would be included and how the payment and shipping would work. All in all it was an unusual but very nice online shopping experience and I would feel confident to do it again in the same manners. I think it’s always good to make sure you receive a proper invoice at the end and check whether everything you want is on there. It helps if you know something about bikes, but the sellers were always helpful and provided answers where I felt like things were unclear.

The order

I went with the LCR018-D frame from lightcarbon. For the sizing I utilized the usual guides and references. To go with the frame I ordered two bottle cages, their 44mm deep carbon wheels and a bottom bracket.

Everything else was ordered through more “traditional” online shopping: This includes a Shimano 105 groupset and all the tooling mostly, which will get it’s own fun chapter.

The package

Shipping took three months or so, due to the frames popularity I was told. Also the handlebars were not in stock anymore, which was communicated nicely - I just went with some wider ones in my case (happy UCI noises), but I could also have gotten some cheaper ones + a refund. I was not in a rush, but definitely something to consider. And to be honest here: I was relieved when the package arrived! There was not a point were things felt sketchy, but it was still a lot of money to me.

Oddly enough, the frames and wheels were shipped separately. As per the seller: To prevent damage to either. This was communicated from the beginning (since you also pay for two packages, not one). When it arrived, all was well protected and without a scratch. Axles, bolts, mounts for bike computers, seatpost - everything included. As well as a torque spec. Never ordered a frame before, but from my unprofessional POV it had everything I wanted.

cross-posted from: feddit.org/post/36017235

March 2026 I watched a video about bike frames from China, or rather: Chinese OEM (frames). It is in German, but talks about how Chinese biking equipment brands are trying to establish themselves, rather than just producing for others. So, with a like for crafting, making, building and biking, I started the journey of building a bike around a carbon frame from a Chinese OEM.

Disclaimer

  • I’m not qualified for any deeper quality insights other than the “look and feel” of things.
  • While I learned a few things from maintaining my gravel bike, I’m no professional in working with bikes.
  • I did not do any price comparisons ahead of time, but will try to give one at the end. Everything was paid for by myself. This is purely a fun and passion project (including the write up).
  • This is about the buying/ordering of things, Part 2 will be the build

The ordering

Unable to get the video out of my head, I did more and more digging. And everything I found seemed so positiv! So much so, that I actually started the buying process of a frame. And a process it was! Where you would expect a price tag on the website and a button for adding a component to the cart, there is an email address. And I don’t know if it’s like that for all manufacturers, but it was for the two or three I checked. And to me, this seemed super weird! If not for all the positive experiences online, I would have stopped right there.

Start of April I sent a mail regarding a frame I liked, starting a conversation that would end with me buying a frame and a set of wheels. With the time zone difference it was mostly one mail per day, but for the next few days and weeks, all my questions got answered, we figured out what was required, what would be included and how the payment and shipping would work. All in all it was an unusual but very nice online shopping experience and I would feel confident to do it again in the same manners. I think it’s always good to make sure you receive a proper invoice at the end and check whether everything you want is on there. It helps if you know something about bikes, but the sellers were always helpful and provided answers where I felt like things were unclear.

The order

I went with the LCR018-D frame from lightcarbon. For the sizing I utilized the usual guides and references. To go with the frame I ordered two bottle cages, their 44mm deep carbon wheels and a bottom bracket.

Everything else was ordered through more “traditional” online shopping: This includes a Shimano 105 groupset and all the tooling mostly, which will get it’s own fun chapter.

The package

Shipping took three months or so, due to the frames popularity I was told. Also the handlebars were not in stock anymore, which was communicated nicely - I just went with some wider ones in my case (happy UCI noises), but I could also have gotten some cheaper ones + a refund. I was not in a rush, but definitely something to consider. And to be honest here: I was relieved when the package arrived! There was not a point were things felt sketchy, but it was still a lot of money to me.

Oddly enough, the frames and wheels were shipped separately. As per the seller: To prevent damage to either. This was communicated from the beginning (since you also pay for two packages, not one). When it arrived, all was well protected and without a scratch. Axles, bolts, mounts for bike computers, seatpost - everything included. As well as a torque spec. Never ordered a frame before, but from my unprofessional POV it had everything I wanted.

0

Tour de France in Ostdeutschland?: Abgefahrene Straßen

taz.de Tour de France in Ostdeutschland?: Abgefahrene Straßen taz.de
preview

Die Tour de France soll 2029 in Ostdeutschland starten. Doch der „Grand Depart“ passt nicht so ganz zur Situation des Breitensports und zur Infrastruktur.

Die Tour de France soll 2029 in Ostdeutschland starten. Doch der „Grand Depart“ passt nicht so ganz zur Situation des Breitensports und zur Infrastruktur.

0

Kaufempfehlung? Smartphone-Haltung für das Fahrrad gesucht!

preview

Kaufempfehlung? Smartphone-Haltung für das Fahrrad gesucht!

Für meine Lenkerstange besitze ich bereits ein Exemplar, welches eher einer Fahrradtasche mit Smartphonebereich entspricht - Chinaprodukt von #Lemego. Vorteil: Wasserdicht, Stauraum für die Brieftasche, Schlüssel und Gedöns - und das Ding ist wirklich langlebig. Nachteil: Bei dem alten Modell nur Klettverschluss, sodass der Blickwinkel bei meinem neuen Rad während der Fahrt wirklich ungünstig ist, schlechte Bedienbarkeit, da die Folie nicht flach aufliegt, im Hochsommer unbrauchbar, da sich unter der Folie die Hitze noch mehr staut und das Gerät sich extrem aufheizt. Und wenn man das #Smartphone als Navi nutzen will, benötigt man zwangsläufig zusätzliche Ohrhörer, da das Handy komplett eingepackt wird und kaum mehr zu hören ist.

Daher würde ich gerne mal wissen: Welche #Smartphonehalterung nutzt ihr während der Fahrt? Ich suche etwas komfortables, in erster Linie für die Nutzung als Navigationsgerät.

#Fahrrad #Handyhalterung #Smartphonehalterung #Handy @fahrrad @fedibiker

Kaufempfehlung? Smartphone-Haltung für das Fahrrad gesucht!

Für meine Lenkerstange besitze ich bereits ein Exemplar, welches eher einer Fahrradtasche mit Smartphonebereich entspricht - Chinaprodukt von #Lemego. Vorteil: Wasserdicht, Stauraum für die Brieftasche, Schlüssel und Gedöns - und das Ding ist wirklich langlebig. Nachteil: Bei dem alten Modell nur Klettverschluss, sodass der Blickwinkel bei meinem neuen Rad während der Fahrt wirklich ungünstig ist, schlechte Bedienbarkeit, da die Folie nicht flach aufliegt, im Hochsommer unbrauchbar, da sich unter der Folie die Hitze noch mehr staut und das Gerät sich extrem aufheizt. Und wenn man das #Smartphone als Navi nutzen will, benötigt man zwangsläufig zusätzliche Ohrhörer, da das Handy komplett eingepackt wird und kaum mehr zu hören ist.

Daher würde ich gerne mal wissen: Welche #Smartphonehalterung nutzt ihr während der Fahrt? Ich suche etwas komfortables, in erster Linie für die Nutzung als Navigationsgerät.

#Fahrrad #Handyhalterung #Smartphonehalterung #Handy @fahrrad @fedibiker

0

stabil mobil - Spezialräder testen - Tour durch Deutschland

cargobike.jetzt stabil mobil - Spezialräder testen für ein mobiles Leben - cargobike.jetzt www.cargobike.jetzt
preview

Auf der Liste sind noch eine Online-Informationsveranstaltung und die Städte:

  • Ravensburg
  • Miesbach
  • Garmisch-Partenkirchen
  • Neumarkt i.d.OPf.

Auf der Liste sind noch eine Online-Informationsveranstaltung und die Städte:

  • Ravensburg
  • Miesbach
  • Garmisch-Partenkirchen
  • Neumarkt i.d.OPf.
0

❔Gesucht: Fahrrad Pendeln Winterausstattung

preview

cross-posted from: feddit.org/post/35295175

Hallo! Langsam nährt sich das Ende des Jahres leider wieder. Ich lebe mittlerweile in eine kleinen Stadt wo ich aktiv mit dem Fahrrad Pendeln kann. Ich würde das gerne auch bei Schnee und Eis weiter tun. Ich habe aktuell nur mein normales MTB.

Ich würde mich von erfahrenden Pendlern über allgemeine Winterempfehlungen freuen und was ich mir vielleicht anschaffen sollte.

Ich hab bereits an Spiked Rädern gedacht und da überlegt ob vielleicht ein Zweitrad sinnvoll wäre, da der Deutsche Winter ja so wechselhaft ist dass ich nicht jeden Tag die Räder wechseln will. Aber das könnte FInanziell leider sehr knapp werden. Auch gesehen habe ich dass es wohl so Spiked Aufzüge gibt. Taugen die auch was und wäre das schneller spontan drauf und abgezogen?

Wenn ihr Spezifikationen von meinem Rad braucht bitte sagt wie ich das auch rausfinde. Bin leider kein Profi. :D

Aber ich kann schonmal was über meine Reifen sagen: ETRTO-Größe: 57-622 (29 Zoll)

Das hatte ich mal recherchiert für neue Schläuche. :)

cross-posted from: feddit.org/post/35295175

Hallo! Langsam nährt sich das Ende des Jahres leider wieder. Ich lebe mittlerweile in eine kleinen Stadt wo ich aktiv mit dem Fahrrad Pendeln kann. Ich würde das gerne auch bei Schnee und Eis weiter tun. Ich habe aktuell nur mein normales MTB.

Ich würde mich von erfahrenden Pendlern über allgemeine Winterempfehlungen freuen und was ich mir vielleicht anschaffen sollte.

Ich hab bereits an Spiked Rädern gedacht und da überlegt ob vielleicht ein Zweitrad sinnvoll wäre, da der Deutsche Winter ja so wechselhaft ist dass ich nicht jeden Tag die Räder wechseln will. Aber das könnte FInanziell leider sehr knapp werden. Auch gesehen habe ich dass es wohl so Spiked Aufzüge gibt. Taugen die auch was und wäre das schneller spontan drauf und abgezogen?

Wenn ihr Spezifikationen von meinem Rad braucht bitte sagt wie ich das auch rausfinde. Bin leider kein Profi. :D

Aber ich kann schonmal was über meine Reifen sagen: ETRTO-Größe: 57-622 (29 Zoll)

Das hatte ich mal recherchiert für neue Schläuche. :)