#lemmyapps

posts tagged #lemmyapps

0

New AI Disclosure/Tagging rule

preview

Thank you to everyone who participated in this post and shared your thoughts about how to handle apps produced with LLM technology.

Any project posted here will now require an AI disclosure if any ML/LLM technology was used in any way in the development:

  • Please include [AI] or [AI Assisted] as a tag at the end of your post title when sharing or discussing the project.
  • In the post body, please include in what way AI was used, e.g.:
AI disclosure:
design: none
implementation: assist
testing: copilot
documentation: auto
review: pair
deployment: hint

Please consult ai-declaration.md for details how to apply about these categories. If you are posting about an app, but are not the developer, you should include the most complete information available, e.g.: " This repository lists Copilot as a contributor." or " This app shows signs of AI development such as…"

Why not ban AI entirely?

There were a few comments that called for an outright ban on any apps that were built in part or whole with LLMs. It was not a clear consensus. Furthermore, I don’t personally see how that would be feasible. Consider the following situations: - A dev uses an AI search tool to look up information related to the project that is incorporated into the project - A dev uses an AI tool to translate between languages - A dev creates all of the code from their brain without any use of an LLM, but uses an LLM for the project description/readme page - A dev used a modern code review to identify errors - A dev used AI to create icons or other assets for human written code - A dev incorporates code from another project, which used LLM tools in one or more of these ways - Etc. I’m not sure which if any of these situations would lead to an app being banned from this community, or how to best navigate cases like this. Please DM me or reply here if you have a solution and would like to be in charge of implementing it as a moderator in this community.

Thank you to everyone who participated in this post and shared your thoughts about how to handle apps produced with LLM technology.

Any project posted here will now require an AI disclosure if any ML/LLM technology was used in any way in the development:

  • Please include [AI] or [AI Assisted] as a tag at the end of your post title when sharing or discussing the project.
  • In the post body, please include in what way AI was used, e.g.:
AI disclosure:
design: none
implementation: assist
testing: copilot
documentation: auto
review: pair
deployment: hint

Please consult ai-declaration.md for details how to apply about these categories. If you are posting about an app, but are not the developer, you should include the most complete information available, e.g.: " This repository lists Copilot as a contributor." or " This app shows signs of AI development such as…"

Why not ban AI entirely?

There were a few comments that called for an outright ban on any apps that were built in part or whole with LLMs. It was not a clear consensus. Furthermore, I don’t personally see how that would be feasible. Consider the following situations: - A dev uses an AI search tool to look up information related to the project that is incorporated into the project - A dev uses an AI tool to translate between languages - A dev creates all of the code from their brain without any use of an LLM, but uses an LLM for the project description/readme page - A dev used a modern code review to identify errors - A dev used AI to create icons or other assets for human written code - A dev incorporates code from another project, which used LLM tools in one or more of these ways - Etc. I’m not sure which if any of these situations would lead to an app being banned from this community, or how to best navigate cases like this. Please DM me or reply here if you have a solution and would like to be in charge of implementing it as a moderator in this community.

0

Request for comment: LLM-coded Apps [Meta]

preview

I’ve recently had a request for tagging or adding a rule about tagging AI-generated and AI-assisted software.

Different communities have handled this differently, for example this decision after significant discussion by the selfhosted community.

What do you think? Would you like to see similar policy here? Something simpler that just shows whether something was produced primarily/significantly with AI, or something else entirely?

I’ve recently had a request for tagging or adding a rule about tagging AI-generated and AI-assisted software.

Different communities have handled this differently, for example this decision after significant discussion by the selfhosted community.

What do you think? Would you like to see similar policy here? Something simpler that just shows whether something was produced primarily/significantly with AI, or something else entirely?

0

Lemonade: Lemmy Client — Open Source

preview

Hello everyone. A few days ago, I introduced a new client app here, but due to some concerns about keeping the source code closed and the whole vibe coding thing, it wasn’t exactly well received lol. So today, I’ve decided to open-source it. You can now take a look at the source code yourselves. Hopefully you’ll like it!

Link: github.com/datbadaisi/lemonade

Edit: Note: As far as I remember, most of the app was built with Grok 4.5 through Grok Builder. I occasionally used Codex when I ran into difficulties.

Hello everyone. A few days ago, I introduced a new client app here, but due to some concerns about keeping the source code closed and the whole vibe coding thing, it wasn’t exactly well received lol. So today, I’ve decided to open-source it. You can now take a look at the source code yourselves. Hopefully you’ll like it!

Link: github.com/datbadaisi/lemonade

Edit: Note: As far as I remember, most of the app was built with Grok 4.5 through Grok Builder. I occasionally used Codex when I ran into difficulties.

0

Looking for a web app with keyboard navigation

preview

Hi there.

I am looking for either a lemmy.world front-end or some sort of web app that I can use that has keyboard navigation.

I have tried “Alternative UI’s” that are provided on the front page, but none of them has keyboard navigation and I have looked through lemmyapps.com and none of the web apps there have it.

I have been using Alexandrite which is the type of UI that I am looking for.

I would prefer if it’s not a mobile-first web app like Voyager.

If push comes to shove, I could use a userscript to try and force it in,

TIA

Hi there.

I am looking for either a lemmy.world front-end or some sort of web app that I can use that has keyboard navigation.

I have tried “Alternative UI’s” that are provided on the front page, but none of them has keyboard navigation and I have looked through lemmyapps.com and none of the web apps there have it.

I have been using Alexandrite which is the type of UI that I am looking for.

I would prefer if it’s not a mobile-first web app like Voyager.

If push comes to shove, I could use a userscript to try and force it in,

TIA

0

Lemonade: Lemmy Client — A New App

preview

Hello everyone! Today, I’d like to introduce a new Lemmy client I’ve been working on.

I designed the app with a clean and simple interface in mind. For the overall layout, I took a lot of inspiration from the Reddit app, lol. Due to some circumstances, the app is currently only available on Android. I hope you guys will like it!

Link: play.google.com/store/apps/details?id=com.thezell…

P.S. I named the app Lemonade because I really like lemonade too, lol.

Hello everyone! Today, I’d like to introduce a new Lemmy client I’ve been working on.

I designed the app with a clean and simple interface in mind. For the overall layout, I took a lot of inspiration from the Reddit app, lol. Due to some circumstances, the app is currently only available on Android. I hope you guys will like it!

Link: play.google.com/store/apps/details?id=com.thezell…

P.S. I named the app Lemonade because I really like lemonade too, lol.

0

WTF happened to the apps?

preview

Voyager just updated so my old phone (Galaxy S8) will no longer work because of outdated webview? There is a recent Google update trying to nag me to install, however I believe this is the one that purges unsigned apps and/or adds a ton of datascraping (my phone no longer receives updates so this push is HIGHLY suspicious).

I don’t want to update, it’s a fucking message board, I can use a browser to view it, so why shittify everything? I installed Boost, spent the 5 minutes unchecking the 200 ad vendors it sells data to, yet it has an ‘unknown error’ logging into my account. It can display the guest instance fine, however. Even the sh.itjust.works site struggled on waterfox to load until I somehow prompted a login recovery screen that triggered the anti-bot verification and then I could use it.

I’m tired, man. Can’t apps and webdev just work? Why is trying to remain private and degoogled such an uphill fucking battle? I cannot be advertised to, please stop breaking all my shit by trying.

Voyager just updated so my old phone (Galaxy S8) will no longer work because of outdated webview? There is a recent Google update trying to nag me to install, however I believe this is the one that purges unsigned apps and/or adds a ton of datascraping (my phone no longer receives updates so this push is HIGHLY suspicious).

I don’t want to update, it’s a fucking message board, I can use a browser to view it, so why shittify everything? I installed Boost, spent the 5 minutes unchecking the 200 ad vendors it sells data to, yet it has an ‘unknown error’ logging into my account. It can display the guest instance fine, however. Even the sh.itjust.works site struggled on waterfox to load until I somehow prompted a login recovery screen that triggered the anti-bot verification and then I could use it.

I’m tired, man. Can’t apps and webdev just work? Why is trying to remain private and degoogled such an uphill fucking battle? I cannot be advertised to, please stop breaking all my shit by trying.

0

I made a lemmy client that swipes like tinder

preview

I kept getting annoyed with lemmy clients being confusing, hard to navigate, or just plain ugly. So I did my best to create a web app that now I use every day. It kind of works like Tinder, you swipe right to up vote, left to down vote, and swipe down to just mark as read. I actually designed it that way because I did a hell of a lot of research on different theories as to how we should treat voting sites like Lemmy or Reddit. I realized that the endless feed actually caused me to engage less. Mostly because I wouldn’t really take the time to consider each post. Coincidentally I actually feel more engaged because of this swipe interaction that Tinder uses, making a decision for each post. Marking as read or swiping down means “it’s not my cup of tea, but it’s allowed”. Swipe left is “this is not okay/spam”. And swipe right is “I think this needs more attention”. Anyways, thought I would share the public link, as per usual, you can log into whatever instance you have. I also gave it a slightly esoteric name and a cool logo based on cave art of human hands. (And also hid a bonus matrix rain theme in the settings).

I kept getting annoyed with lemmy clients being confusing, hard to navigate, or just plain ugly. So I did my best to create a web app that now I use every day. It kind of works like Tinder, you swipe right to up vote, left to down vote, and swipe down to just mark as read. I actually designed it that way because I did a hell of a lot of research on different theories as to how we should treat voting sites like Lemmy or Reddit. I realized that the endless feed actually caused me to engage less. Mostly because I wouldn’t really take the time to consider each post. Coincidentally I actually feel more engaged because of this swipe interaction that Tinder uses, making a decision for each post. Marking as read or swiping down means “it’s not my cup of tea, but it’s allowed”. Swipe left is “this is not okay/spam”. And swipe right is “I think this needs more attention”. Anyways, thought I would share the public link, as per usual, you can log into whatever instance you have. I also gave it a slightly esoteric name and a cool logo based on cave art of human hands. (And also hid a bonus matrix rain theme in the settings).

0

What piefed/Lemmy apps allow search by post/comment url? (iOS only)

preview

I am trying to test a federation issue, but other than mlem what apps can you paste a post or comment url into the search and find that post or comment?

I am trying to test a federation issue, but other than mlem what apps can you paste a post or comment url into the search and find that post or comment?

0

RetroLemmy forum. Powered by lemmybb

preview

cross-posted from: retrolemmy.com/post/41739779

cross-posted from: retrolemmy.com/post/41731951

Hi,

A little while back we introduced old.retrolemmy.com. This is not really interesting on its own, but I wondered if we could also get it running on Retrofed. And this was successful by way of a proxy. The cool side effect the proxy had is that lemmy-only apps now also work if you enter old.retrofed.com in your preferred app.

This made the idea of preservation come up, and @Die4Ever@retrolemmy.com wondered if the proxy could be modified to also work on lemmybb and translate to older API versions. And after a while I got forum.retrolemmy.com to work with lemmybb - an old software for lemmy last updated 3 years ago - that makes the fediverse look and work like an old phpbb forum of older days. Most functions are working and functioning as intended, but there can still be some bugs here and there. Some we could probably fix, but some can also be attributed to the older software and it’s quirks.

If you notice any bugs, you can message me, or reply here.

Also, this project got pretty big, but if you want to use it yourself, its at Github. It has full 0.17, limited 0.18 and full 0.19 support for the frontend, and lemmy(current) or piefed for the backend.

This thread is posted via forum.retrolemmy.com

Edit: Known limitations:

  • No 2fa. As this was only added in lemmy version 0.18.x
  • No last reply date/time. This can be enabled, but will call a ton of API calls for every page load, making the site unusable.

If you want to better interact with people that are using LemmyBB, remember to occasionally sort your front page by “New Comments” (in PieFed it’s just called “Active”). Otherwise the BB users might start bumping threads without other people knowing :(

cross-posted from: retrolemmy.com/post/41739779

cross-posted from: retrolemmy.com/post/41731951

Hi,

A little while back we introduced old.retrolemmy.com. This is not really interesting on its own, but I wondered if we could also get it running on Retrofed. And this was successful by way of a proxy. The cool side effect the proxy had is that lemmy-only apps now also work if you enter old.retrofed.com in your preferred app.

This made the idea of preservation come up, and @Die4Ever@retrolemmy.com wondered if the proxy could be modified to also work on lemmybb and translate to older API versions. And after a while I got forum.retrolemmy.com to work with lemmybb - an old software for lemmy last updated 3 years ago - that makes the fediverse look and work like an old phpbb forum of older days. Most functions are working and functioning as intended, but there can still be some bugs here and there. Some we could probably fix, but some can also be attributed to the older software and it’s quirks.

If you notice any bugs, you can message me, or reply here.

Also, this project got pretty big, but if you want to use it yourself, its at Github. It has full 0.17, limited 0.18 and full 0.19 support for the frontend, and lemmy(current) or piefed for the backend.

This thread is posted via forum.retrolemmy.com

Edit: Known limitations:

  • No 2fa. As this was only added in lemmy version 0.18.x
  • No last reply date/time. This can be enabled, but will call a ton of API calls for every page load, making the site unusable.

If you want to better interact with people that are using LemmyBB, remember to occasionally sort your front page by “New Comments” (in PieFed it’s just called “Active”). Otherwise the BB users might start bumping threads without other people knowing :(

0

App for Lemmy

preview

Development is a difficult work ik. But I was hoping that we could have a good looking app. I recently came across an app called Anisync which looks amazing

Development is a difficult work ik. But I was hoping that we could have a good looking app. I recently came across an app called Anisync which looks amazing

0

A tiny menu bar app that shows Lemmy posts.

preview

Crossposted from lemmy.ml/post/47339272

Finally I can stay forever on lemmy even not opening the browser! 😂

Thinking of using it as a mod tool to see new posts in communities I moderate.

Sharing it early, maybe get some ideas on how to make it better.

github.com/tracyspacy/lemmy-tray

Crossposted from lemmy.ml/post/47339272

Finally I can stay forever on lemmy even not opening the browser! 😂

Thinking of using it as a mod tool to see new posts in communities I moderate.

Sharing it early, maybe get some ideas on how to make it better.

github.com/tracyspacy/lemmy-tray

0

Looking for an iOS app that has media management, and post/comment drafts

preview

I am a full time Mlem user, absolutely love the app. I am not looking to replace it, however there is currently no development for being able to manage your media within the app.

I would also like to find an app that can save posts and comments as drafts. This is not a deal breaker however and would only be looking at that if it has media management.

I am a full time Mlem user, absolutely love the app. I am not looking to replace it, however there is currently no development for being able to manage your media within the app.

I would also like to find an app that can save posts and comments as drafts. This is not a deal breaker however and would only be looking at that if it has media management.

0

Dee, a new Lemmy client for SailfishOS

preview

I’m not the developer of this app, I just spotted it and noticed nobody had done any post about it here.

It’s clearly early days: You can’t create posts or comments and the UX could use some work. But it has a lot of potential and now we can count LinuxMobile to the supported platforms.

I’m not the developer of this app, I just spotted it and noticed nobody had done any post about it here.

It’s clearly early days: You can’t create posts or comments and the UX could use some work. But it has a lot of potential and now we can count LinuxMobile to the supported platforms.

0

Which Lemmy apps/frontends do support thread merging/deduplication?

preview

cross-posted from: feddit.org/post/27405929

Yesterday I found Interstellar which has this feature. I assume mainly because it is not only a Lemmy app, but also a PieFed one, which has this feature in the reference frontend (AFAIK).

Are there other Lemmy apps or frontends that support thread merging?

cross-posted from: feddit.org/post/27405929

Yesterday I found Interstellar which has this feature. I assume mainly because it is not only a Lemmy app, but also a PieFed one, which has this feature in the reference frontend (AFAIK).

Are there other Lemmy apps or frontends that support thread merging?

0

Can any app match Sync's compact view yet?

preview

This is probably the biggest thing keeping me from switching. Other apps almost feel claustrophobic with how little of the screen is used. At least last time I explored.

Edit: just tried again and Summit is pretty close I guess.

Edit: answering my own post now but with some customization that either didn’t exist before or I missed I have gotten even closer.

This is probably the biggest thing keeping me from switching. Other apps almost feel claustrophobic with how little of the screen is used. At least last time I explored.

Edit: just tried again and Summit is pretty close I guess.

Edit: answering my own post now but with some customization that either didn’t exist before or I missed I have gotten even closer.

0

Help this community in a new phase [meta]

preview

Lemmy is not the same today as it was two years ago, and the app landscape is not the same either. There are a number of key improvements that we can work together to create.

We are looking for additional moderators

This is not a traditional moderation task. There is very little in terms of moderating comments and post content. Rather, we are looking especially for people willing to put in a little work on a monthly or bimonthly basis to improve existing projects.

Updating and Automating the Lemmy Apps Directory

The Apps “metathread” directory is woefully out of date. At present, no part of it is automated. I have been manually checking each app and updating information periodically, but this has proven unsustainable. I am sure that there is someone in this community who has the technical background to update it in a fully or partially automated way.

Updating join-Lemmy.org/apps

If the community megathread here is out of date, the “official” website is a fossil. This is the number one most visible place that people find apps. It’s the top result in most web searches, it falls under the umbrella of the official project, etc. This community is not affiliated with the website, but it is OSS and they do accept pull requests. Someone with basic knowledge of github and a little free time could do a lot of good here.

App reviews

I’d love for people to share some specifics about the app you use and what you love about it. Do you have screenshots of a custom layout/palette you’ve set up? Let’s show off what lemmy apps can do!

Info about PieFed support

Some apps have extended to other platforms of the fediverse, especially PieFed. How would we like to integrate and highlight that info? Should there be a special category or list in this community? A new community entirely?

Please share your thoughts and how you may be able to contribute. Like everything on lemmy, this community is what we collectively make of it. Thanks for making it great!

Lemmy is not the same today as it was two years ago, and the app landscape is not the same either. There are a number of key improvements that we can work together to create.

We are looking for additional moderators

This is not a traditional moderation task. There is very little in terms of moderating comments and post content. Rather, we are looking especially for people willing to put in a little work on a monthly or bimonthly basis to improve existing projects.

Updating and Automating the Lemmy Apps Directory

The Apps “metathread” directory is woefully out of date. At present, no part of it is automated. I have been manually checking each app and updating information periodically, but this has proven unsustainable. I am sure that there is someone in this community who has the technical background to update it in a fully or partially automated way.

Updating join-Lemmy.org/apps

If the community megathread here is out of date, the “official” website is a fossil. This is the number one most visible place that people find apps. It’s the top result in most web searches, it falls under the umbrella of the official project, etc. This community is not affiliated with the website, but it is OSS and they do accept pull requests. Someone with basic knowledge of github and a little free time could do a lot of good here.

App reviews

I’d love for people to share some specifics about the app you use and what you love about it. Do you have screenshots of a custom layout/palette you’ve set up? Let’s show off what lemmy apps can do!

Info about PieFed support

Some apps have extended to other platforms of the fediverse, especially PieFed. How would we like to integrate and highlight that info? Should there be a special category or list in this community? A new community entirely?

Please share your thoughts and how you may be able to contribute. Like everything on lemmy, this community is what we collectively make of it. Thanks for making it great!

0

2025 Fedecan Instance Census is now open

preview

I’m sharing this here as well, since the census has sections on app / frontend usage. I’m hoping the results from this census will complement the results from the poll that @Xylight@lemdro.id ran recently :)

cross-posted from: lemmy.ca/post/57328037

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6


The census will close on January 15th, 2026.

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey. You do not need to be located in Canada, and you do not need to have an account on one of our platforms. If you do have an account on lemmy.ca, sh.itjust.works, piefed.ca, and/or pixelfed.ca, you can indicate that on the census in order to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank. Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on:

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year :)

I’m sharing this here as well, since the census has sections on app / frontend usage. I’m hoping the results from this census will complement the results from the poll that @Xylight@lemdro.id ran recently :)

cross-posted from: lemmy.ca/post/57328037

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6


The census will close on January 15th, 2026.

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey. You do not need to be located in Canada, and you do not need to have an account on one of our platforms. If you do have an account on lemmy.ca, sh.itjust.works, piefed.ca, and/or pixelfed.ca, you can indicate that on the census in order to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank. Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on:

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year :)

0

Blorp is now 1 year old 🎂

preview

It’s been awhile since I’ve posted here. For anyone that was interested in Blorp in the past, but it was missing that one feature you needed, chances are that feature has been added/fixed.

My favorite features

  • The best multi account support in any Lemmy or PieFed app, guaranteed!
    • Started your post on the wrong account? No problem! Switch accounts and pickup where you left off
    • Trying to moderate a post from the wrong account? Switch accounts without needing to find your way back to the post.
    • Blorp was meticulously designed from the ground up so none of the links in the app break when you switch accounts. If the content federates with your instance, you’ll see it no matter what account you open the link on!
  • Draft posts
  • Light box feed, beautiful for browsing photography communities or cute cat/dog photos
  • PieFed specific features
    • Post flairs
    • Post poll voting
    • Comment thread locking
    • More to come!
  • Lemmy V1 support
  • Edit text as raw markdown or rich text!
  • Many hours fixing little bugs and annoyances

Please give Blorp a try if you haven’t already ❤️

Download

It’s been awhile since I’ve posted here. For anyone that was interested in Blorp in the past, but it was missing that one feature you needed, chances are that feature has been added/fixed.

My favorite features

  • The best multi account support in any Lemmy or PieFed app, guaranteed!
    • Started your post on the wrong account? No problem! Switch accounts and pickup where you left off
    • Trying to moderate a post from the wrong account? Switch accounts without needing to find your way back to the post.
    • Blorp was meticulously designed from the ground up so none of the links in the app break when you switch accounts. If the content federates with your instance, you’ll see it no matter what account you open the link on!
  • Draft posts
  • Light box feed, beautiful for browsing photography communities or cute cat/dog photos
  • PieFed specific features
    • Post flairs
    • Post poll voting
    • Comment thread locking
    • More to come!
  • Lemmy V1 support
  • Edit text as raw markdown or rich text!
  • Many hours fixing little bugs and annoyances

Please give Blorp a try if you haven’t already ❤️

Download

0

[Poll] What Lemmy/Piefed client(s) do you use?

StrawPoll What Lemmy/Piefed client(s) do you use? - StrawPoll strawpoll.com
preview

Curious on the usage statistics.

Should I make a full survey asking about granularity so that app devs can see what to focus on?

Curious on the usage statistics.

Should I make a full survey asking about granularity so that app devs can see what to focus on?

0

Feature request: Custom automatic comment replacements

preview

Ignore obnoxious comment signatures, make dogwhistles more transparent, remind yourself not to interact with certain topics, uncensor common celf-censorship euphemisms, or just apply some good 'ol censorship of your own. What I am imagining is a system that allows the user to set custom regular expression rules that get applied to all comments. There could be both global rules (that apply to every single comment) and user rules (that apply to all comments from just that user, similar to custom user labels).

What are your thoughts on having a feature like this in whatever app you use? Would you even find it useful at all? If the change is only visible to the user, is there any abuse potential?

Pictured here is a proof of concept showing Thunder with a simple “Cloud To Butt” function applied.

Ignore obnoxious comment signatures, make dogwhistles more transparent, remind yourself not to interact with certain topics, uncensor common celf-censorship euphemisms, or just apply some good 'ol censorship of your own. What I am imagining is a system that allows the user to set custom regular expression rules that get applied to all comments. There could be both global rules (that apply to every single comment) and user rules (that apply to all comments from just that user, similar to custom user labels).

What are your thoughts on having a feature like this in whatever app you use? Would you even find it useful at all? If the change is only visible to the user, is there any abuse potential?

Pictured here is a proof of concept showing Thunder with a simple “Cloud To Butt” function applied.

0

🚀 Boost for Lemmy 1.0.20 - PieFed Support

preview

cross-posted from: lemmy.world/post/34293577

A fresh update is here! This release brings initial support for PieFed. The PieFed API is still under development, so some features are limited, but here’s what’s new:

  • Support for PieFed (limited while the API evolves)
  • Notifications for new activity on communities, posts, comments, or users on PieFed
  • View topics and feeds

Give it a try and let me know how it works for you!

cross-posted from: lemmy.world/post/34293577

A fresh update is here! This release brings initial support for PieFed. The PieFed API is still under development, so some features are limited, but here’s what’s new:

  • Support for PieFed (limited while the API evolves)
  • Notifications for new activity on communities, posts, comments, or users on PieFed
  • View topics and feeds

Give it a try and let me know how it works for you!

0

[Summit][v1.67.1] Add support for PieFed

preview

Add support for PieFed.

Full changelog

  • Add support for PieFed.
  • Fix a bug where when you open a post, the spinner will appear to stutter for a moment.
  • Fix a bug where pulling to refresh on the post screen will cause all comments to refresh even if they have not changed.
  • Fix a bug where inline images will sometimes not load until the screen is refreshed.
  • Fix a bug where “Prev” button doesn’t load the page if pressed on page 2 when Infinity mode is off.

Update

Fix some bugs and re-releasing as v1.67.1

  • Add some default PieFed instances to the login form auto-complete.
  • Fix a bug where you can’t log into PieFed with a password with more than 60 characters.

Update 2

Release should be fully rolled out now.

Add support for PieFed.

Full changelog

  • Add support for PieFed.
  • Fix a bug where when you open a post, the spinner will appear to stutter for a moment.
  • Fix a bug where pulling to refresh on the post screen will cause all comments to refresh even if they have not changed.
  • Fix a bug where inline images will sometimes not load until the screen is refreshed.
  • Fix a bug where “Prev” button doesn’t load the page if pressed on page 2 when Infinity mode is off.

Update

Fix some bugs and re-releasing as v1.67.1

  • Add some default PieFed instances to the login form auto-complete.
  • Fix a bug where you can’t log into PieFed with a password with more than 60 characters.

Update 2

Release should be fully rolled out now.

0

[Photon] v2.0.0

preview

cross-posted from: lemdro.id/post/25562194

This is a very big release since v1.31.4. If you’ve used phtn.app, you won’t notice a difference, since that runs on the latest commit.

TL;DR

  • Photon has been completely rewritten to use Svelte 5
  • This brings significant performance improvements
  • The UX has been changed to fit Photon’s philosophy more closely
  • Many issues have been resolved and bugs fixed
  • 60% of changes are under the hood, but there’s many visible ones too

What you’ll notice

Snappier performance

  • Svelte 5 optimizes a lot of the reactive parts of the app
  • I’ve also spent a lot of time on a new virtualizer, which runs a lot faster

Design changes

  • While the overall layout is relatively the same, I’ve reworked a lot of pages to fall more in line with my design philosophy.
  • The design across (most) pages is much more consistent
  • There’s a new default theme
  • Compact mode is now the default (if you’ve used photon before, this will not affect your setting)
  • Comment layout is slightly different and more intuitive
  • Modals now create a backstack so you can press the back button on your browser

New features and options

  • More moderation features
    • Quickly view users’/submissions’ moderation logs
    • View the users’ votes n a post
    • Grouped reports for many reports on the same post
      • you can resolve many at once
  • Options for more granular control over how links work in posts
  • Option to reverse the action row
  • Option to use absolute timestamps
  • lemmy language tagging support
  • Command palette now has contextual navigation options
  • Contextual warnings for certain actions (like missing languages in posts)
  • Messages page has been overhauled with markdown, contextual actions, etc
  • Better view and options for modlog page
  • Donation dialog as Lemmy requested

Optimizations

  • Uses CSS animations more often which are faster
  • Uses svelte context API to reduce prop drilling
  • Navbar uses CSS rather than JS for positioning
  • Uses optimized svelte $state rather than stores

Languages

Thanks to the community making translations on the Weblate, Photon has support for 18 languages!

  • English (100%)
  • Hebrew (58%)
  • Arabic (33%) (fxomt)
  • Bulgarian (72%) (salif)
  • Chinese (Simplified) (91%) (qiancsf, CDN, binary3141)
  • Chinese (Traditional) (21%) (binary3141)
  • Dutch (81%) (qaz)
  • Estonian (24%) (pewgar)
  • Finnish (94%) (sevon)
  • French (87%) (Blisterexe)
  • German (64%) (poVoq)
  • Hungarian (55%) (myedition8)
  • Japanese (84%) (Rentlar)
  • Polish (83%) (gapetto)
  • Portuguese (78%) (tmpod)
  • Russian (83%) (WerySkok, mudkip)
  • Spanish (81%) (acidrums4)
  • Turkish (91%) (ikanat)

In the future

  • Piefed support is targeting v2.2.0
    • With the way it is being written, Mastodon support may as well come sometime around v3.0.0

There’s a lot more in this release, as well as more to come. I’m trying to make Photon closer to its design philosophy, which can be summarized as:

It should not take more than 3 seconds to identify an action you wish to perform within a given container or page.

This covers a lot of reasons why I design stuff the way I do, for example, you’ll never find more than 5 buttons (minus links) in a single container. Additionally, specific types of actions will usually look different, like primary actions on a page versus sub actions.

I hope you enjoy this release!

Full Changelog: github.com/Xyphyn/photon/…/v1.31.4...v2.0.0

cross-posted from: lemdro.id/post/25562194

This is a very big release since v1.31.4. If you’ve used phtn.app, you won’t notice a difference, since that runs on the latest commit.

TL;DR

  • Photon has been completely rewritten to use Svelte 5
  • This brings significant performance improvements
  • The UX has been changed to fit Photon’s philosophy more closely
  • Many issues have been resolved and bugs fixed
  • 60% of changes are under the hood, but there’s many visible ones too

What you’ll notice

Snappier performance

  • Svelte 5 optimizes a lot of the reactive parts of the app
  • I’ve also spent a lot of time on a new virtualizer, which runs a lot faster

Design changes

  • While the overall layout is relatively the same, I’ve reworked a lot of pages to fall more in line with my design philosophy.
  • The design across (most) pages is much more consistent
  • There’s a new default theme
  • Compact mode is now the default (if you’ve used photon before, this will not affect your setting)
  • Comment layout is slightly different and more intuitive
  • Modals now create a backstack so you can press the back button on your browser

New features and options

  • More moderation features
    • Quickly view users’/submissions’ moderation logs
    • View the users’ votes n a post
    • Grouped reports for many reports on the same post
      • you can resolve many at once
  • Options for more granular control over how links work in posts
  • Option to reverse the action row
  • Option to use absolute timestamps
  • lemmy language tagging support
  • Command palette now has contextual navigation options
  • Contextual warnings for certain actions (like missing languages in posts)
  • Messages page has been overhauled with markdown, contextual actions, etc
  • Better view and options for modlog page
  • Donation dialog as Lemmy requested

Optimizations

  • Uses CSS animations more often which are faster
  • Uses svelte context API to reduce prop drilling
  • Navbar uses CSS rather than JS for positioning
  • Uses optimized svelte $state rather than stores

Languages

Thanks to the community making translations on the Weblate, Photon has support for 18 languages!

  • English (100%)
  • Hebrew (58%)
  • Arabic (33%) (fxomt)
  • Bulgarian (72%) (salif)
  • Chinese (Simplified) (91%) (qiancsf, CDN, binary3141)
  • Chinese (Traditional) (21%) (binary3141)
  • Dutch (81%) (qaz)
  • Estonian (24%) (pewgar)
  • Finnish (94%) (sevon)
  • French (87%) (Blisterexe)
  • German (64%) (poVoq)
  • Hungarian (55%) (myedition8)
  • Japanese (84%) (Rentlar)
  • Polish (83%) (gapetto)
  • Portuguese (78%) (tmpod)
  • Russian (83%) (WerySkok, mudkip)
  • Spanish (81%) (acidrums4)
  • Turkish (91%) (ikanat)

In the future

  • Piefed support is targeting v2.2.0
    • With the way it is being written, Mastodon support may as well come sometime around v3.0.0

There’s a lot more in this release, as well as more to come. I’m trying to make Photon closer to its design philosophy, which can be summarized as:

It should not take more than 3 seconds to identify an action you wish to perform within a given container or page.

This covers a lot of reasons why I design stuff the way I do, for example, you’ll never find more than 5 buttons (minus links) in a single container. Additionally, specific types of actions will usually look different, like primary actions on a page versus sub actions.

I hope you enjoy this release!

Full Changelog: github.com/Xyphyn/photon/…/v1.31.4...v2.0.0

0

[Summit][v1.65.1] General improvements

preview

cross-posted from: lemmy.world/post/31900024

Welcome to v1.65.

This release brings some general polish to the app, rounding out some rough edges and aims to improve the overall user experience.

The major change included in this update is a fully fledged save/restore system for post feeds. This system works under the hood so you shouldn’t notice any changes to the app. This system aims to make leaving and returning to the app a more predictable experience. You should no longer lose your place in the post feed.

If you preferred the old experience, this new save & restore system can be disabled in Settings > Post feed.

There are a lot of other minor improves too such as improved error handling and text editing. See the change log for more details.

Last but not least, I am going to start gauging interest for PieFed support starting from this release. If you want Summit to support PieFed please upvote this post: lemmy.world/post/31899935 .

Full changelog

  • Save and restore post feeds on app recreation. This should make the app behave in a more predicable way. Eg. if you leave the app for extended period and come back, the app should now preserve exactly where you were before you left. No more losing your spot!
  • Add setting to toggle save/restore post feeds on app recreation.
  • Improve error messages.
  • Manually add a workaround to get img.gvid.tv links to work in the app.
  • Fix issue where some images won’t load.
  • Fix issue where user profile screen doesn’t change when current account changed.
  • Fix issue where “save post” button state doesn’t reflect actual state of whether the post has been saved or not in certain cases. Eg. if the post is saved, the save post button should be filled.
  • Fix navigation rail bugs when the navigation rail is on but large screen support is off.
  • Fix a bug where comment timestamps do not update on refresh.
  • Improve some of the text editor functions. Eg. better insert link logic, better quote, bullet list and numbered list logic.
  • Fix a crash when downloading images.
  • Fix crop tool’s guidelines/overlay blending in with the image.
  • Fix issue where text would wrap in the post/comment header when it’s not supposed to.
  • Fix video lock rotation button icon to show the lock icon when orientation is locked and not show the lock

Update 1

Some bug fixes to be tacked on:

  • Fix a crash when downloading images.
  • Fix crop tool’s guidelines/overlay blending in with the image.
  • Fix issue where text would wrap in the post/comment header when it’s not supposed to.
  • Fix video lock rotation button icon to show the lock icon when orientation is locked and not show the lock icon when orientation isn’t locked.

Update 2

Rolling out the changes above as v1.65.1.

cross-posted from: lemmy.world/post/31900024

Welcome to v1.65.

This release brings some general polish to the app, rounding out some rough edges and aims to improve the overall user experience.

The major change included in this update is a fully fledged save/restore system for post feeds. This system works under the hood so you shouldn’t notice any changes to the app. This system aims to make leaving and returning to the app a more predictable experience. You should no longer lose your place in the post feed.

If you preferred the old experience, this new save & restore system can be disabled in Settings > Post feed.

There are a lot of other minor improves too such as improved error handling and text editing. See the change log for more details.

Last but not least, I am going to start gauging interest for PieFed support starting from this release. If you want Summit to support PieFed please upvote this post: lemmy.world/post/31899935 .

Full changelog

  • Save and restore post feeds on app recreation. This should make the app behave in a more predicable way. Eg. if you leave the app for extended period and come back, the app should now preserve exactly where you were before you left. No more losing your spot!
  • Add setting to toggle save/restore post feeds on app recreation.
  • Improve error messages.
  • Manually add a workaround to get img.gvid.tv links to work in the app.
  • Fix issue where some images won’t load.
  • Fix issue where user profile screen doesn’t change when current account changed.
  • Fix issue where “save post” button state doesn’t reflect actual state of whether the post has been saved or not in certain cases. Eg. if the post is saved, the save post button should be filled.
  • Fix navigation rail bugs when the navigation rail is on but large screen support is off.
  • Fix a bug where comment timestamps do not update on refresh.
  • Improve some of the text editor functions. Eg. better insert link logic, better quote, bullet list and numbered list logic.
  • Fix a crash when downloading images.
  • Fix crop tool’s guidelines/overlay blending in with the image.
  • Fix issue where text would wrap in the post/comment header when it’s not supposed to.
  • Fix video lock rotation button icon to show the lock icon when orientation is locked and not show the lock

Update 1

Some bug fixes to be tacked on:

  • Fix a crash when downloading images.
  • Fix crop tool’s guidelines/overlay blending in with the image.
  • Fix issue where text would wrap in the post/comment header when it’s not supposed to.
  • Fix video lock rotation button icon to show the lock icon when orientation is locked and not show the lock icon when orientation isn’t locked.

Update 2

Rolling out the changes above as v1.65.1.

0

[Summit][v1.64.4] More admin/mod tools

preview

This release is dedicated to all the admins and moderators who are keeping our instances and communities running.

This release adds additional moderation tools/features. In particular, it improves the mod logs screen and adds support for more mod things (private message reports, registration applications).

The release has been in the works for a while, so I’ve decided to make it live now although some additional features are planned and in the works. I’m still working on more changes and I will tack them on to this release as patch updates as they become ready.

I’m currently on a trip to visit family, so I will be slower to respond/work on the app in general.

As always, feel free to leave feedback in the comments. Enjoy!

Full changelog:

  • Add inbox section for new account applications (for admins).
  • Add support for approving/declining new account applications (for admins).
  • Add support for viewing a detailed list of votes for posts/comments (for mods/admins).
  • Add option to view moderation actions by user to the post/comment/person menu.
  • Add a new section in the search screen “Random communities”. This section shows a random list of 10 communities that has at least one post.
  • Add a setting to show/hide deleted posts.
  • Add per-section unread counts to the inbox side panel.
  • Add support for creating private message reports.
  • Add support for viewing private message reports. (The screen to view this is really crappy. This will be fixed in a patch update later.)
  • Update community/inbox side panel UI a bit.
  • Replace the image editing library the app uses with a different one that actually works.
  • Remove “cross-posted from:” text that is auto-inserted when cross-posting so that the behavior is consistent with current web.
  • Fix a bug where the title does not update in the post screen when the comment sort order is changed.
  • Fixed a bug where instances are not displayed for users when they should be.
  • Fix a bug where images do not load if on a private instance.
  • Fix a bug where back ticks can break text formatting.
  • Fix a bug where the navigation rail does not hide when the side panel is shown.
  • Fix a bug where double tapping send can cause an action to be performed twice.

Update

There was a bug I knew about that I forgot to fix before I released the app (this is what I get for rushing a release). I will fix it in a dot update:

  • Fix a bug where the unread screen of the inbox will not load unless you are an admin.

Update 2

Fixed the inbox for regular users but it was still broken for mods. Fixed in v1.64.2.

Update 3

Bump the version to v1.64.3. This release is identical to v1.64.2 but I forgot to do a version bump for v1.64.2.

Update 4

Fix some bugs with the release. Released as v1.64.4.

  • Add cake day.
  • Fix a bug where the app would crash randomly.
  • Fix a bug where sometimes downloading an image would fail without an apparent cause.
  • Make the post predictive back animation more apparent.

Update 5

Working on more things:

  • Fix a bug where selecting one of the inbox screen categories fast will cause items from two categories to appear at the same time.
  • Add a shortcut to go back to the “Unread” category in the inbox by tapping the inbox button when it’s already selected.

Forgot I used to post releases here as well. I’ll try to remember going forwards

This release is dedicated to all the admins and moderators who are keeping our instances and communities running.

This release adds additional moderation tools/features. In particular, it improves the mod logs screen and adds support for more mod things (private message reports, registration applications).

The release has been in the works for a while, so I’ve decided to make it live now although some additional features are planned and in the works. I’m still working on more changes and I will tack them on to this release as patch updates as they become ready.

I’m currently on a trip to visit family, so I will be slower to respond/work on the app in general.

As always, feel free to leave feedback in the comments. Enjoy!

Full changelog:

  • Add inbox section for new account applications (for admins).
  • Add support for approving/declining new account applications (for admins).
  • Add support for viewing a detailed list of votes for posts/comments (for mods/admins).
  • Add option to view moderation actions by user to the post/comment/person menu.
  • Add a new section in the search screen “Random communities”. This section shows a random list of 10 communities that has at least one post.
  • Add a setting to show/hide deleted posts.
  • Add per-section unread counts to the inbox side panel.
  • Add support for creating private message reports.
  • Add support for viewing private message reports. (The screen to view this is really crappy. This will be fixed in a patch update later.)
  • Update community/inbox side panel UI a bit.
  • Replace the image editing library the app uses with a different one that actually works.
  • Remove “cross-posted from:” text that is auto-inserted when cross-posting so that the behavior is consistent with current web.
  • Fix a bug where the title does not update in the post screen when the comment sort order is changed.
  • Fixed a bug where instances are not displayed for users when they should be.
  • Fix a bug where images do not load if on a private instance.
  • Fix a bug where back ticks can break text formatting.
  • Fix a bug where the navigation rail does not hide when the side panel is shown.
  • Fix a bug where double tapping send can cause an action to be performed twice.

Update

There was a bug I knew about that I forgot to fix before I released the app (this is what I get for rushing a release). I will fix it in a dot update:

  • Fix a bug where the unread screen of the inbox will not load unless you are an admin.

Update 2

Fixed the inbox for regular users but it was still broken for mods. Fixed in v1.64.2.

Update 3

Bump the version to v1.64.3. This release is identical to v1.64.2 but I forgot to do a version bump for v1.64.2.

Update 4

Fix some bugs with the release. Released as v1.64.4.

  • Add cake day.
  • Fix a bug where the app would crash randomly.
  • Fix a bug where sometimes downloading an image would fail without an apparent cause.
  • Make the post predictive back animation more apparent.

Update 5

Working on more things:

  • Fix a bug where selecting one of the inbox screen categories fast will cause items from two categories to appear at the same time.
  • Add a shortcut to go back to the “Unread” category in the inbox by tapping the inbox button when it’s already selected.

Forgot I used to post releases here as well. I’ll try to remember going forwards

0

can you not see upvotes anymore? tried on 4 different apps

preview

I use photon and wanted to go back to a post I upvoted, but when I went to the “upvoted” section on my profile, it was just on an endless loading screen. So I tried Alexandrite, no option available at all. I also can’t find the options on Jerboa or Boost. has it been removed? is there a bug?

I use photon and wanted to go back to a post I upvoted, but when I went to the “upvoted” section on my profile, it was just on an endless loading screen. So I tried Alexandrite, no option available at all. I also can’t find the options on Jerboa or Boost. has it been removed? is there a bug?

0

What is your favorite App and what is the "killer feature?"

preview

There are dozens of amazing apps for Lemmy.

Whether you’re on a mobile device running Android or iOS, using a dedicated desktop app, or one of the great web apps, there are a lot to choose from. Some have been around for years and still see active development like Voyager or Lemmy UI (the default web app on most instances). Some are newer to the scene but have compelling features that make them appealing.

Some apps are blazing fast, some have personalized recommendations, some have an impeccable interface, some have advanced features for content moderation.

It’s tricky to know which apps are getting the most use, or what features you haven’t heard about. What are the thoughtful details you love in your top app? Feel free to tag the devs to show them some love!

There are dozens of amazing apps for Lemmy.

Whether you’re on a mobile device running Android or iOS, using a dedicated desktop app, or one of the great web apps, there are a lot to choose from. Some have been around for years and still see active development like Voyager or Lemmy UI (the default web app on most instances). Some are newer to the scene but have compelling features that make them appealing.

Some apps are blazing fast, some have personalized recommendations, some have an impeccable interface, some have advanced features for content moderation.

It’s tricky to know which apps are getting the most use, or what features you haven’t heard about. What are the thoughtful details you love in your top app? Feel free to tag the devs to show them some love!

0

Blorp, write code in your lemmy posts and comments with realtime syntax highlighting!

preview

Try it!

I haven’t seen another Lemmy client that lets you write code in your post with real-time syntax highlighting. It’s not just code. Write your posts in rich text without toggling between Markdown and preview.

There are a lot of Lemmy clients, so I’m sure someone else does this. But I wanted to share in case anyone else finds this helpful.

Try it!

I haven’t seen another Lemmy client that lets you write code in your post with real-time syntax highlighting. It’s not just code. Write your posts in rich text without toggling between Markdown and preview.

There are a lot of Lemmy clients, so I’m sure someone else does this. But I wanted to share in case anyone else finds this helpful.

0

Remy for Lemmy: Upcoming iOS client app with modern interface and advanced features

preview

Hi everyone,

I am the indie developer behind SoraSNS (a Fediverse and Bluesky client featured by Tech Crunch twice).

I just started working on a modern and futuristic styled Lemmy client. It will have a modern UI and equal features as the alien blue app.

Some features I am planning include:

  • all features like alien blue app (you know which app I am referring to)
  • a better notification interface so you can see the thread the message belongs to
  • auto translation feature
  • bookmark folders
  • folders to organized your subscribed communities
  • a discovery feed for most popular posts from your subscribed communities and followed persons
  • watch a post and receive notifications about new comments
  • scroll horizontally to switch to previous or next post in the list
  • Home Screen widget to automatically show top news, refreshed automatically several times a day
  • Filters for posts and comments based on activity, follow status

The image I attached is obviously the build 0. The target release date is around the first week of May.

If you are interested, please subscribe to the community to receive updates and TestFlight:

!remy@lemmy.world

!remy@lemmy.zip

My other apps: SoraSNS for Mastodon Misskey Bluesky, with local ML powered For You timeline: apps.apple.com/us/app/…/id6450969760

Thank you in advance!

Hi everyone,

I am the indie developer behind SoraSNS (a Fediverse and Bluesky client featured by Tech Crunch twice).

I just started working on a modern and futuristic styled Lemmy client. It will have a modern UI and equal features as the alien blue app.

Some features I am planning include:

  • all features like alien blue app (you know which app I am referring to)
  • a better notification interface so you can see the thread the message belongs to
  • auto translation feature
  • bookmark folders
  • folders to organized your subscribed communities
  • a discovery feed for most popular posts from your subscribed communities and followed persons
  • watch a post and receive notifications about new comments
  • scroll horizontally to switch to previous or next post in the list
  • Home Screen widget to automatically show top news, refreshed automatically several times a day
  • Filters for posts and comments based on activity, follow status

The image I attached is obviously the build 0. The target release date is around the first week of May.

If you are interested, please subscribe to the community to receive updates and TestFlight:

!remy@lemmy.world

!remy@lemmy.zip

My other apps: SoraSNS for Mastodon Misskey Bluesky, with local ML powered For You timeline: apps.apple.com/us/app/…/id6450969760

Thank you in advance!

0

Sync for Lemmy app replacement which has multi windows for posts & communities

preview

cross-posted from: reddthat.com/post/37812176

The sync developer has been MIA for a long time (1 year or longer) and I fear it will stop working sooner or later when Lemmy instances start updating to v1.0 in future.

I use Sync because it has a nice Material you theme, is smooth, supports caching posts & media offline (also keeps the comments, posts loaded even if android reclaims memory from the app)

I can open posts, comments, and even communities in a seperate window if I choose to do so.

Anything with multi window support out there yet? I used voyager for posting. But, want sync like multi window capabilities.

cross-posted from: reddthat.com/post/37812176

The sync developer has been MIA for a long time (1 year or longer) and I fear it will stop working sooner or later when Lemmy instances start updating to v1.0 in future.

I use Sync because it has a nice Material you theme, is smooth, supports caching posts & media offline (also keeps the comments, posts loaded even if android reclaims memory from the app)

I can open posts, comments, and even communities in a seperate window if I choose to do so.

Anything with multi window support out there yet? I used voyager for posting. But, want sync like multi window capabilities.

0

Voyager’s new promo site & app update

preview

cross-posted from: vger.social/post/15192818

Voyager’s new promo site!

Hey there!

I just published Voyager’s new promo site at getvoyager.app. This site is intended to be an easy way to share the app with your friends and family. Let me know what you think! I’m hoping to roll out a couple more improvements to user onboarding soon™️, so stay tuned.

In other news, I hope you like the latest app update! ICYMI: the video player was significantly revamped, you can now upload videos (assuming lemmy instance support: keep reading…), and Android users can now long press links to preview the url, as well as for share/copy/open options.

github.com/aeharding/voyager/releases/tag/2.26.0

Speaking of videos: If you’ve ever wondered why videos sometimes fail to play in iOS, it’s because many Lemmy instances are misconfigured. Please share this site I just published with your Lemmy admin to help debug issues: aeharding.github.io/lemmy-streaming Around 50% of instances are misconfigured 😳 so I really appreciate your help on getting the word out to admins! 🫡

cross-posted from: vger.social/post/15192818

Voyager’s new promo site!

Hey there!

I just published Voyager’s new promo site at getvoyager.app. This site is intended to be an easy way to share the app with your friends and family. Let me know what you think! I’m hoping to roll out a couple more improvements to user onboarding soon™️, so stay tuned.

In other news, I hope you like the latest app update! ICYMI: the video player was significantly revamped, you can now upload videos (assuming lemmy instance support: keep reading…), and Android users can now long press links to preview the url, as well as for share/copy/open options.

github.com/aeharding/voyager/releases/tag/2.26.0

Speaking of videos: If you’ve ever wondered why videos sometimes fail to play in iOS, it’s because many Lemmy instances are misconfigured. Please share this site I just published with your Lemmy admin to help debug issues: aeharding.github.io/lemmy-streaming Around 50% of instances are misconfigured 😳 so I really appreciate your help on getting the word out to admins! 🫡

0

Is there an app that can mimic multireddits?

preview

I thrived on daily reading of a few multireddits, which are specific clusters of the same subreddits, as my default view; I only went to the general feed for all of my subscribed communities every once in a while.

For example: old.reddit.com/…/YouShouldKnow+LifeProTips+datais…

Is this possible on Lemmy?

I thrived on daily reading of a few multireddits, which are specific clusters of the same subreddits, as my default view; I only went to the general feed for all of my subscribed communities every once in a while.

For example: old.reddit.com/…/YouShouldKnow+LifeProTips+datais…

Is this possible on Lemmy?

0

Summit for Lemmy is Open Source

GitHub GitHub - idunnololz/summit: Summit for Lemmy github.com
preview

cross-posted from: lemmy.world/post/27182708

At the time of writing Summit for Lemmy should be completely open source.

After a lot of contemplation I’ve decided to open source the app. There are still some changes that probably need to happen before it can be considered “FOSS” but this is a huge step I think.

As I’m voiced my opinions on this previously, the main repository for Summit will not be to the public for PRs. If you encounter bugs or have any feature requests please continue to send them through the proper channels (ideally to this community).

Enjoy~~

cross-posted from: lemmy.world/post/27182708

At the time of writing Summit for Lemmy should be completely open source.

After a lot of contemplation I’ve decided to open source the app. There are still some changes that probably need to happen before it can be considered “FOSS” but this is a huge step I think.

As I’m voiced my opinions on this previously, the main repository for Summit will not be to the public for PRs. If you encounter bugs or have any feature requests please continue to send them through the proper channels (ideally to this community).

Enjoy~~

0

[Summit][Release][v1.58.4] Import/Export databases & Lots of performance improvements

preview

cross-posted from: lemmy.world/post/26921774

The focus of this release is to add support for importing/exporting tables from the database of the app.

A lot of preferences/data, especially those that allow you to add to a list, are built on top of tables. Tables allows the app to scale better when lists can grow very long. Some features that use tables include drafts and bookmarked communities.

Currently while the app allows users to import/export settings, the app does not give the user any way to import/export anything backed by tables. This means not everything can be carried over by importing/exporting settings.

This release aims to give users a way to preview the database within the app and export them and import them with a high level of configurability.

This feature is a prerequisite of a larger feature which will be announced later.

Full changelog

  • Add support to import/export app data that is stored in tables.
  • Improve performance of “mark posts as read on scroll”.
  • Improve general scroll performance on the post feed screen.
  • Updated community search result to show the full community name with instance.
  • Remove malformed markdown fix which tried to correct malformed headlines by inserting a space between ‘#’ and text if there wasn’t one.
  • Change open instance behavior. If the instance opened does not match the current account, the guest account is used automatically. This is to prevent the app from getting into a weird state.
  • Fix a bug where links do not open correctly if the default browser app is Firefox.
  • Fix a bug where the post feed header does not update when switching instances.
  • Fix a bug where rate limit errors are not recognized correctly.
  • Fix a bug where “mark posts as read on scroll” doesn’t mark a post as read if the height of the post is taller than the screen.
  • Fix a bug where the thumbnail shown in the “Save for later” bottom sheet do not update when a new image is chosen to replace an older one.

Update

Some more bug fixes to come:

  • Fix a bug where the thumbnail shown in the “Save for later” bottom sheet do not update when a new image is chosen to replace an older one.
  • Improve general scroll performance on the post feed screen.

Update 2

Releasing the changes in the last update as v1.58.1.

Update 3

Conducting some user-agent testing. Releasing as v1.58.2.

  • Add setting to change the app’s user-agent.

Update 4

More fixes incoming:

  • Fix a bug in full post layouts where blurred NSFW images are sometimes not shown.
  • Fix a bug in full post layouts where NSFW posts can cause content to jump as they are loaded in.
  • Fix a bug where blurred NSFW images are not shown for videos.
  • Fix a bug where “Prefer full size image” for certain layouts was not respected and was always on.
  • Fix a bug where posts in the post feed would jump around if “Prefer full size image” was on.
  • Fix a bug where some posts do not have a “preview” button when using the list style layouts.
  • Fix card shadow being clipped on user info screen.
  • More optimizations in the post feed/post screen.

Update 5

Releasing new changes as v1.58.3

Update 6

Big update here which should both improve performance and also lessen the effects of rate limiting issues. These changes will be released as v1.58.4.

  • Optimized network calls in the critical sections of the app.

cross-posted from: lemmy.world/post/26921774

The focus of this release is to add support for importing/exporting tables from the database of the app.

A lot of preferences/data, especially those that allow you to add to a list, are built on top of tables. Tables allows the app to scale better when lists can grow very long. Some features that use tables include drafts and bookmarked communities.

Currently while the app allows users to import/export settings, the app does not give the user any way to import/export anything backed by tables. This means not everything can be carried over by importing/exporting settings.

This release aims to give users a way to preview the database within the app and export them and import them with a high level of configurability.

This feature is a prerequisite of a larger feature which will be announced later.

Full changelog

  • Add support to import/export app data that is stored in tables.
  • Improve performance of “mark posts as read on scroll”.
  • Improve general scroll performance on the post feed screen.
  • Updated community search result to show the full community name with instance.
  • Remove malformed markdown fix which tried to correct malformed headlines by inserting a space between ‘#’ and text if there wasn’t one.
  • Change open instance behavior. If the instance opened does not match the current account, the guest account is used automatically. This is to prevent the app from getting into a weird state.
  • Fix a bug where links do not open correctly if the default browser app is Firefox.
  • Fix a bug where the post feed header does not update when switching instances.
  • Fix a bug where rate limit errors are not recognized correctly.
  • Fix a bug where “mark posts as read on scroll” doesn’t mark a post as read if the height of the post is taller than the screen.
  • Fix a bug where the thumbnail shown in the “Save for later” bottom sheet do not update when a new image is chosen to replace an older one.

Update

Some more bug fixes to come:

  • Fix a bug where the thumbnail shown in the “Save for later” bottom sheet do not update when a new image is chosen to replace an older one.
  • Improve general scroll performance on the post feed screen.

Update 2

Releasing the changes in the last update as v1.58.1.

Update 3

Conducting some user-agent testing. Releasing as v1.58.2.

  • Add setting to change the app’s user-agent.

Update 4

More fixes incoming:

  • Fix a bug in full post layouts where blurred NSFW images are sometimes not shown.
  • Fix a bug in full post layouts where NSFW posts can cause content to jump as they are loaded in.
  • Fix a bug where blurred NSFW images are not shown for videos.
  • Fix a bug where “Prefer full size image” for certain layouts was not respected and was always on.
  • Fix a bug where posts in the post feed would jump around if “Prefer full size image” was on.
  • Fix a bug where some posts do not have a “preview” button when using the list style layouts.
  • Fix card shadow being clipped on user info screen.
  • More optimizations in the post feed/post screen.

Update 5

Releasing new changes as v1.58.3

Update 6

Big update here which should both improve performance and also lessen the effects of rate limiting issues. These changes will be released as v1.58.4.

  • Optimized network calls in the critical sections of the app.
0

Blorp v1.0.3 Released for Mac and iOS

preview

cross-posted from: lemmy.ml/post/27244086

Try it!

If you already have either the iOS or the Mac app it should prompt you to update. You can relaunch the Mac app to trigger the prompt.

Changes

  • Add setting to hide read posts in feed
  • Fix comments not showing up after submitting
  • Fix bug where saved posts feed was only showing posts local to your server
  • Refresh inbox tab more frequently
  • Cache user profiles
  • Improve performance of post feeds (most noticeable on iOS)
  • Fix dark mode flicker
  • Fix youtube embeds where video ID contains dashes
  • Increase the sizing of the login form to make it to use

Appreciate all the feedback so far!

I’m struggling a little to get the performance I want on iOS. I’m curious if anyone is using an older iPhone. I would love to hear if you think the app feels snappy enough or if there’s room for improvement. If you could leave a comment or DM me with the phone your using and what you think.

cross-posted from: lemmy.ml/post/27244086

Try it!

If you already have either the iOS or the Mac app it should prompt you to update. You can relaunch the Mac app to trigger the prompt.

Changes

  • Add setting to hide read posts in feed
  • Fix comments not showing up after submitting
  • Fix bug where saved posts feed was only showing posts local to your server
  • Refresh inbox tab more frequently
  • Cache user profiles
  • Improve performance of post feeds (most noticeable on iOS)
  • Fix dark mode flicker
  • Fix youtube embeds where video ID contains dashes
  • Increase the sizing of the login form to make it to use

Appreciate all the feedback so far!

I’m struggling a little to get the performance I want on iOS. I’m curious if anyone is using an older iPhone. I would love to hear if you think the app feels snappy enough or if there’s room for improvement. If you could leave a comment or DM me with the phone your using and what you think.

0

[Summit][Release][v1.57.2] Even more user requests

preview

cross-posted from: lemmy.world/post/26604491

Welcome to the v1.57.0 release. This release is focused on addressing the rest of the user requests.

There’s a lot in this release so read through the changelog to see everything that has been added. Some highlights include adding auto-loading posts when “swipe between posts” is enabled, a new setting that allows you to change the app locale from within the app on any version of Android and some changes to make it easier to identify if an user is new to Lemmy.

This release also marks the start of some major changes to the app that I’ve been considering almost a full year ago.

One of Summit’s strength is the insane number of customizations available to a user. However this also poses a downside as new users may not want to spend hours checking and tweaking every setting. While Summit tries to make sure the default settings are pretty good, it’s obvious that the out-of-the-box settings are not for everyone.

The ideal middle ground is to offer a list of sane defaults, not just one. That way new users can setup the app to their liking while taking only seconds. This is what the next big feature will be aiming to solve.

I’ll provide more details regarding what these specific changes are over the next few releases. As always if you have any questions or suggestions please let me know in the comments.

Full changelog

  • Add a setting to choose the direction of swipe gestures. By default this is left-to-right.
  • Add a setting to change the default volume of the inline video player
  • Add an option to share a community/instance in the community/instance screen.
  • Add a setting to choose default app to open URLs with. By default Summit will open URLs within the app however setting a default browser will override this behavior.
  • Add a setting to change the locale of the app.
  • Add a setting to control whether community suggestions are shown in the community selector bottom sheet.
  • Add a setting to enable/disable full bleed images in the full post view.
  • Add an option to the “Take screenshot” screen to share the screenshot instead of saving it.
  • Change the formatter for post titles. If a post’s title starts with the character ‘#’, it will be escaped. This fixes some edge cases where a post starts with a “hashtag”. Eg. “#summitforlemmy is an ok app for lemmy”.
  • Fix a bug on the create post screen. If the webpage (based on the URL field) of a post does not have a valid title, the title will not be suggested.
  • Update the design of the user info screen.
  • Fix a bug where the settings page will not respect the app language if one is selected.
  • Change the app behavior when handling posts with invalid thumnails. In rare cases the thumnail url and the url of the post are the same but the thumbnail url does not link to an image. Previously this would cause the app to not show the image or the link. This release changes the behavior so that the link will be shown in this case.
  • Automatically load more posts when the end of the post feed is reached when “swipe between posts” is enabled.
  • Change the default of the setting “Show new user tag” to true. New users (accounts that are less than 30 days of age) will display a yellow tag next to their account name.
  • Fix a bug where sharing an image would not show a preview of the image being shared.

Update

Noticed some bugs in the app. One major bug is the inability to change the app base theme. Will push a fix out as v1.57.1.

  • Fix a bug where the base theme setting is ignored.
  • Fix a bug where some shadows are being clipped.
  • Adjust default screenshot width from 500 -> 360 since 500 seemed too wide which produced smaller text when fit on screen.

Update 2

Found a crash so will update the release and release as v1.57.2.

  • Fix a crash in rare cases when viewing the default apps settings screen.

Update 3

Rollout complete.

cross-posted from: lemmy.world/post/26604491

Welcome to the v1.57.0 release. This release is focused on addressing the rest of the user requests.

There’s a lot in this release so read through the changelog to see everything that has been added. Some highlights include adding auto-loading posts when “swipe between posts” is enabled, a new setting that allows you to change the app locale from within the app on any version of Android and some changes to make it easier to identify if an user is new to Lemmy.

This release also marks the start of some major changes to the app that I’ve been considering almost a full year ago.

One of Summit’s strength is the insane number of customizations available to a user. However this also poses a downside as new users may not want to spend hours checking and tweaking every setting. While Summit tries to make sure the default settings are pretty good, it’s obvious that the out-of-the-box settings are not for everyone.

The ideal middle ground is to offer a list of sane defaults, not just one. That way new users can setup the app to their liking while taking only seconds. This is what the next big feature will be aiming to solve.

I’ll provide more details regarding what these specific changes are over the next few releases. As always if you have any questions or suggestions please let me know in the comments.

Full changelog

  • Add a setting to choose the direction of swipe gestures. By default this is left-to-right.
  • Add a setting to change the default volume of the inline video player
  • Add an option to share a community/instance in the community/instance screen.
  • Add a setting to choose default app to open URLs with. By default Summit will open URLs within the app however setting a default browser will override this behavior.
  • Add a setting to change the locale of the app.
  • Add a setting to control whether community suggestions are shown in the community selector bottom sheet.
  • Add a setting to enable/disable full bleed images in the full post view.
  • Add an option to the “Take screenshot” screen to share the screenshot instead of saving it.
  • Change the formatter for post titles. If a post’s title starts with the character ‘#’, it will be escaped. This fixes some edge cases where a post starts with a “hashtag”. Eg. “#summitforlemmy is an ok app for lemmy”.
  • Fix a bug on the create post screen. If the webpage (based on the URL field) of a post does not have a valid title, the title will not be suggested.
  • Update the design of the user info screen.
  • Fix a bug where the settings page will not respect the app language if one is selected.
  • Change the app behavior when handling posts with invalid thumnails. In rare cases the thumnail url and the url of the post are the same but the thumbnail url does not link to an image. Previously this would cause the app to not show the image or the link. This release changes the behavior so that the link will be shown in this case.
  • Automatically load more posts when the end of the post feed is reached when “swipe between posts” is enabled.
  • Change the default of the setting “Show new user tag” to true. New users (accounts that are less than 30 days of age) will display a yellow tag next to their account name.
  • Fix a bug where sharing an image would not show a preview of the image being shared.

Update

Noticed some bugs in the app. One major bug is the inability to change the app base theme. Will push a fix out as v1.57.1.

  • Fix a bug where the base theme setting is ignored.
  • Fix a bug where some shadows are being clipped.
  • Adjust default screenshot width from 500 -> 360 since 500 seemed too wide which produced smaller text when fit on screen.

Update 2

Found a crash so will update the release and release as v1.57.2.

  • Fix a crash in rare cases when viewing the default apps settings screen.

Update 3

Rollout complete.