Some 33,000 people aged between 18 and 65 in the Netherlands currently have no permanent place to live, most of them in the big cities, where it is relatively easy to earn money. The real figure may be higher, as it is not known how many people are staying with family or friends.
Some 33,000 people aged between 18 and 65 in the Netherlands currently have no permanent place to live, most of them in the big cities, where it is relatively easy to earn money. The real figure may be higher, as it is not known how many people are staying with family or friends.
Lately my router seems to be struggling under all my devices and after some googling, it seems my Archer AX1800 isnt really meant for more than 20-40 devices and I’m currently sitting at 50 with heavy torrent traffic and a media server with 15-20 friends and family connected (typically not all at once of course).
I was looking at the Omada networking gear but then thought of trying OPNSense since I have pretty much everything I need on hand versus spending $400+ for the Omada stuff.
I’d like to run it on the media server since I have tons of compute/RAM available but my question is about the ethernet ports. My mobo has a dedicated 2.5Gb ethernet port built in and I have a second 2.5Gb card that I could toss in there as well, but my concern is that I may saturate the ports with all the additional traffic. My LAN is just 1Gb outside of these two PCs.
My other option is an unused Optiplex 3050 micro that I’ve installed a second ethernet port on but these would both be 1Gb ports.
Am I likely to run into saturation issues on the media server or should the 2.5Gb ports be more than enough to handle the load? Apart from the torrents and video streaming, the rest of the network is mostly typical devices like phones/tablets/consoles, 6 4K POE cameras connected to an NVR and frigate, and a bunch of IoT devices connected to Home Assistant.
I don’t necessarily mind using the Optiplex but I’d definitely prefer to keep everything in one place if I can. I realize that this means my network goes down if I restart the host but it has been a pretty rock solid setup and Proxmox means I can just restart individual containers/VMs rather than the host most of the time.
Edit: forgot to mention that I’m open to buying another quad port NIC for the server if recommended, but would definitely prefer to not spend money if possible. I was planning on using the current router in AP mode along with its ports for a switch and I have another 4 port 2.5Gb switch in the mix as well
Lately my router seems to be struggling under all my devices and after some googling, it seems my Archer AX1800 isnt really meant for more than 20-40 devices and I’m currently sitting at 50 with heavy torrent traffic and a media server with 15-20 friends and family connected (typically not all at once of course).
I was looking at the Omada networking gear but then thought of trying OPNSense since I have pretty much everything I need on hand versus spending $400+ for the Omada stuff.
I’d like to run it on the media server since I have tons of compute/RAM available but my question is about the ethernet ports. My mobo has a dedicated 2.5Gb ethernet port built in and I have a second 2.5Gb card that I could toss in there as well, but my concern is that I may saturate the ports with all the additional traffic. My LAN is just 1Gb outside of these two PCs.
My other option is an unused Optiplex 3050 micro that I’ve installed a second ethernet port on but these would both be 1Gb ports.
Am I likely to run into saturation issues on the media server or should the 2.5Gb ports be more than enough to handle the load? Apart from the torrents and video streaming, the rest of the network is mostly typical devices like phones/tablets/consoles, 6 4K POE cameras connected to an NVR and frigate, and a bunch of IoT devices connected to Home Assistant.
I don’t necessarily mind using the Optiplex but I’d definitely prefer to keep everything in one place if I can. I realize that this means my network goes down if I restart the host but it has been a pretty rock solid setup and Proxmox means I can just restart individual containers/VMs rather than the host most of the time.
Edit: forgot to mention that I’m open to buying another quad port NIC for the server if recommended, but would definitely prefer to not spend money if possible. I was planning on using the current router in AP mode along with its ports for a switch and I have another 4 port 2.5Gb switch in the mix as well
EFF and 27 other human rights organizations today called on the European Commission to retract a dangerous proposal granting its border agency Frontex to request that national authorities issue take-down orders for social media content and giving it so-called “trusted flagger” status under the Digital Services Act (DSA), the EU regulation governing online platforms and content moderation in the region.The extraordinarily improper proposal not only disregards the provisions of the DSA but also places a me…
EFF and 27 other human rights organizations today called on the European Commission to retract a dangerous proposal granting its border agency Frontex to request that national authorities issue take-down orders for social media content and giving it so-called “trusted flagger” status under the Digital Services Act (DSA), the EU regulation governing online platforms and content moderation in the region.The extraordinarily improper proposal not only disregards the provisions of the DSA but also places a me…
Among the recipients of the money: Cicero Town President Larry Dominick and Lake County Sheriff John Idleburg, both of whose government agencies use the technology from the Atlanta company.
Among the recipients of the money: Cicero Town President Larry Dominick and Lake County Sheriff John Idleburg, both of whose government agencies use the technology from the Atlanta company.
A German state data regulator has opened an investigation on Wednesday into Deutsche Bank following a massive data leak. The authority is investigating possible data protection violations.
A German state data regulator has opened an investigation on Wednesday into Deutsche Bank following a massive data leak. The authority is investigating possible data protection violations.
A reported cyberattack on Wellington IT has exposed sensitive information belonging to members of 50 credit unions, the majority of which are located in Ireland.
A reported cyberattack on Wellington IT has exposed sensitive information belonging to members of 50 credit unions, the majority of which are located in Ireland.
Ride-hailing company Uber is notifying nearly 150,000 drivers that attackers stole their data after breaching AI infrastructure provider Fireworks in early October.
Ride-hailing company Uber is notifying nearly 150,000 drivers that attackers stole their data after breaching AI infrastructure provider Fireworks in early October.
Hi all, I’ve gotten a Brother machine (DCP series) that can do wifi printing/scanning over their proprietary app. However, I’d like to lock it down from my network, because having it on the same LAN as my other devices and the ability to phone out to the internet seem like room for mischievious activities.
For context, I have OpenWRT on my router, and my clients can access the Brother using their iPrint&Scan app and AirPrint on wifi, as well as the traditional USB port. But I’m not good in networking. In my research, I drafted out the following solutions:
Create a firewall rule to block the printer itself from making outbound requests. Seems simple, but I’m not sure if this can persist after IP changes or not.
Create a VLAN for “IoT devices” that cannot send outbound requests to my normal VLAN nor the internet. Inspiration from this video, I’d need to manage a new SSID but it may come in handy for more IoT devices later.
Hook the Brother up to a Raspberry Pi via USB, and install CUPS + SANE on the Pi. Assuming the Pi cannot “phone home” on behalf of the printer, this makes it a local-only “print+scan service” on my normal network and doesn’t require an extra VLAN.
I’d like to ask: which solution above is best for “neutering” the Brother? Or are there any alternatives/details I might’ve missed? I’m not sure if blocking outbound requests this way is enough of a security hardening for an untrusted device, and if there are any usability issues I’ve overlooked so far.
Thanks for any advice, and please share any printer/scanner setup you have in your networks as well. So hopefully I can get more inspiration!
Hi all, I’ve gotten a Brother machine (DCP series) that can do wifi printing/scanning over their proprietary app. However, I’d like to lock it down from my network, because having it on the same LAN as my other devices and the ability to phone out to the internet seem like room for mischievious activities.
For context, I have OpenWRT on my router, and my clients can access the Brother using their iPrint&Scan app and AirPrint on wifi, as well as the traditional USB port. But I’m not good in networking. In my research, I drafted out the following solutions:
Create a firewall rule to block the printer itself from making outbound requests. Seems simple, but I’m not sure if this can persist after IP changes or not.
Create a VLAN for “IoT devices” that cannot send outbound requests to my normal VLAN nor the internet. Inspiration from this video, I’d need to manage a new SSID but it may come in handy for more IoT devices later.
Hook the Brother up to a Raspberry Pi via USB, and install CUPS + SANE on the Pi. Assuming the Pi cannot “phone home” on behalf of the printer, this makes it a local-only “print+scan service” on my normal network and doesn’t require an extra VLAN.
I’d like to ask: which solution above is best for “neutering” the Brother? Or are there any alternatives/details I might’ve missed? I’m not sure if blocking outbound requests this way is enough of a security hardening for an untrusted device, and if there are any usability issues I’ve overlooked so far.
Thanks for any advice, and please share any printer/scanner setup you have in your networks as well. So hopefully I can get more inspiration!
The banner on the podium during James Talarico’s victory speech Nov. 3, read “Love Thy Neighbor,” and the Senator-elect has made outreach rather than triumph his primary focus since that historic night, his campaign says.
On the night of his victory, one of the first people the Senator-elect spoke to was his new colleague Sen. Ted Cruz. Talarico and Cruz had a phone conversation about working together for Texans, according to a person close to the campaign. The morning after the election, his first television appearance was on Fox News, rather than the friendlier territory of CNN or MSNow (though he has made subsequent appearances there). And, the following Monday, Talarico met with Sen. John Cornyn, the man whose seat he is taking.
“He has served our state honorably, and I’m grateful for his advice and guidance,” Talarico wrote of Cornyn on social media after the meeting. "Now is the time for us to come together — Democrats and Republicans — to deliver for Texas.”
Talarico has even pledged to work with X owner Elon Musk, the man who put a $200 million bounty on his political head, if the opportunity arises.
The banner on the podium during James Talarico’s victory speech Nov. 3, read “Love Thy Neighbor,” and the Senator-elect has made outreach rather than triumph his primary focus since that historic night, his campaign says.
On the night of his victory, one of the first people the Senator-elect spoke to was his new colleague Sen. Ted Cruz. Talarico and Cruz had a phone conversation about working together for Texans, according to a person close to the campaign. The morning after the election, his first television appearance was on Fox News, rather than the friendlier territory of CNN or MSNow (though he has made subsequent appearances there). And, the following Monday, Talarico met with Sen. John Cornyn, the man whose seat he is taking.
“He has served our state honorably, and I’m grateful for his advice and guidance,” Talarico wrote of Cornyn on social media after the meeting. "Now is the time for us to come together — Democrats and Republicans — to deliver for Texas.”
Talarico has even pledged to work with X owner Elon Musk, the man who put a $200 million bounty on his political head, if the opportunity arises.
A new experiment demonstrates how quantum devices could verify a person’s position extremely securely, making it much harder to hack sensitive messages.
A new experiment demonstrates how quantum devices could verify a person’s position extremely securely, making it much harder to hack sensitive messages.
Many times more visible satellites than stars in the sky, and many of them brighter than most/all stars. This is a conservative estimate, SpaceX actually wants to make their satellites even bigger than we modelled.
Oh and:
“Fortunately,” even with the most generous possible assumptions on sizes, stationkeeping, and collision avoidance maneuvers, and ignoring ALL OTHER SATELLITES AND DEBRIS, this megaconstellation is above the runaway collision threshold all by itself and would put us into full, fast-timescale Kessler Syndrome. https://arxiv.org/pdf/2607.29644
Let’s pretend that it was possible to do a data centre in space, for a minute. What would that do to the atmosphere?
Many times more visible satellites than stars in the sky, and many of them brighter than most/all stars. This is a conservative estimate, SpaceX actually wants to make their satellites even bigger than we modelled.
Oh and:
“Fortunately,” even with the most generous possible assumptions on sizes, stationkeeping, and collision avoidance maneuvers, and ignoring ALL OTHER SATELLITES AND DEBRIS, this megaconstellation is above the runaway collision threshold all by itself and would put us into full, fast-timescale Kessler Syndrome. https://arxiv.org/pdf/2607.29644
Based on a true story and takes place in 1907 in New York as real-life bankers J. P. Morgan and Charles Barney grapple with a financial crisis sparked by Barney’s failed attempt to manipulate the copper market. As Morgan strives to safeguard his empire he becomes entangled in a clandestine struggle involving his brilliant mistress, Belle de Costa Greene, who ran his world-famous library.
Based on a true story and takes place in 1907 in New York as real-life bankers J. P. Morgan and Charles Barney grapple with a financial crisis sparked by Barney’s failed attempt to manipulate the copper market. As Morgan strives to safeguard his empire he becomes entangled in a clandestine struggle involving his brilliant mistress, Belle de Costa Greene, who ran his world-famous library.
Over the last ten years, we’ve lived through the rapid adoption of remote connectivity in industrial environments around the world.
[…]
Now that we understand the chaos of connectivity in modern industrial environments, we can talk about what’s getting hacked right now, and why. Why water? Why refrigerators?
A few unfortunate, incredibly predictable factors have led us here, and my colleagues and I have been screaming about them for years: [ …]
[…]
Fixing the vulnerability isn’t easy, even if the organisation is aware of it. Industrial systems have long lifecycles, sometimes 10 to 30 years. They’re engineered and tested by the OEM to work in a very specific technology stack and topology. Any alteration can, at best, disrupt the process and, at worst, lead to injury or death. Either outcome can be far more damaging than a casual hacker. Because of these lifecycles, and the inability to replace systems, I still deal with Windows 2000, CE, and XP every week. They can’t be removed from production or modified without express authorisation from the OEM and engineers, plus a significant outage and testing window.
Over the last ten years, we’ve lived through the rapid adoption of remote connectivity in industrial environments around the world.
[…]
Now that we understand the chaos of connectivity in modern industrial environments, we can talk about what’s getting hacked right now, and why. Why water? Why refrigerators?
A few unfortunate, incredibly predictable factors have led us here, and my colleagues and I have been screaming about them for years: [ …]
[…]
Fixing the vulnerability isn’t easy, even if the organisation is aware of it. Industrial systems have long lifecycles, sometimes 10 to 30 years. They’re engineered and tested by the OEM to work in a very specific technology stack and topology. Any alteration can, at best, disrupt the process and, at worst, lead to injury or death. Either outcome can be far more damaging than a casual hacker. Because of these lifecycles, and the inability to replace systems, I still deal with Windows 2000, CE, and XP every week. They can’t be removed from production or modified without express authorisation from the OEM and engineers, plus a significant outage and testing window.
@giornalismo articolo21.org/2026/11/maite-q…
Nel luglio del 1997 le strade di San Sebastián e di tutta la Spagna si riempirono di indignazione, di rabbia e del simbolo silenzioso di un fiocchetto azzurro appuntato sul petto. Fu il sequestro e l’omicidio di Miguel Ángel Blanco,
@giornalismo articolo21.org/2026/11/maite-q…
Nel luglio del 1997 le strade di San Sebastián e di tutta la Spagna si riempirono di indignazione, di rabbia e del simbolo silenzioso di un fiocchetto azzurro appuntato sul petto. Fu il sequestro e l’omicidio di Miguel Ángel Blanco,
@giornalismo articolo21.org/2026/11/piu-che…
A Donald Trump piacciono i vertici fra capi di stato. Ama i tappeti rossi, le fanfare , le bandiere, gli onori militari. Come tutti i presidenti americani alla fine del secondo mandato non e’ piu’interessato a successi politici di piccolo cabotaggio sapendo che non potra’ piu’
@giornalismo articolo21.org/2026/11/piu-che…
A Donald Trump piacciono i vertici fra capi di stato. Ama i tappeti rossi, le fanfare , le bandiere, gli onori militari. Come tutti i presidenti americani alla fine del secondo mandato non e’ piu’interessato a successi politici di piccolo cabotaggio sapendo che non potra’ piu’
Residential offering near Beltline includes finished ADU in backyard Josh GreenWed, 11/18/2026 - 15:04As intown Atlanta densifies, backyards around the city continue to evolve into flex spaces meant for more than cookouts and lounging. Another example to recently blip the radar is located near the commercial heart of historic Westview, where a sizable, modern-leaning home comes with a finished Accessory Dwelling Unit in the backyard, making for a property marketed as “beautifully designed” and “exceptionally versatile.”The ADU—more of a second-story apartment with a private entrance, in this case—is located above a two-car garage and “takes this property to another level,” per sellers. With its kitchen, full bathroom, and combined living/sleeping area, the separated space is suited for guests, a home office, or potential rental income, according to the Engel & Volkers Atlanta listing. The 540 Willard Ave. SW property listed at $889,000 in late October, where the price remains today. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAThat buys five total bedrooms and four bathrooms in 3,091 square feet, in this case. It also makes it the priciest single-family property currently on the market in Westview. The property is a block from the Beltline’s Westside Trail, near KIPP Strive Academy school and just south of the forthcoming Enota Park expansion. A new plaza and Beltline connection is located just east of the home in question, near Westview’s main commercial node. Inside the property’s finished ADU. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTABeyond the rentable backyard unit, standout features of the Willard Avenue house include a two-story foyer, a custom wood range hood in the kitchen, a walk-in pantry, and an oversized primary suite upstairs, per the listing. The home was built in 2025 and first sold back in February for $785,000, per listings records. (Previous listings described the ADU as unfinished, it should be noted.) Find a quick tour in the gallery above. Location of the Westview property (in red) in relation to the Westside Trail (arrow) and other Southwest Atlanta landmarks. Google Maps**…**Follow us on social media:Twitter / Facebook/and now:Instagram • Westview news, discussion (Urbanize Atlanta)Tags540 Willard Ave. SWWestviewSouthwest AtlantaKIPP Strive AcademyADUsWestview NewsWestview HomesAtlanta Homes for SaleAccessory Dwelling UnitAccessory Dwelling UnitsAtlanta homesAtlanta Home TrendsInterior DesignWestsideWestside TrailBeltlineAtlanta BeltLineWestview Homes for SaleAtlanta DensitySarah Alsati PhotographyArtisan Real Estate MediaQuiet StreetImagesLocation of the Westview property (in red) in relation to the Westside Trail (arrow) and other Southwest Atlanta landmarks. Google MapsSarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAArtisan Real Estate Media; courtesy of ENGEL & VÖLKERS ATLANTAArtisan Real Estate Media; courtesy of ENGEL & VÖLKERS ATLANTAInside the property’s finished ADU. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASubtitleWestview listing marks latest intown project with flex, rentable mini unit on propertyNeighborhoodWestviewBackground ImageImageBefore/After ImagesSponsored PostOff
Residential offering near Beltline includes finished ADU in backyard Josh GreenWed, 11/18/2026 - 15:04As intown Atlanta densifies, backyards around the city continue to evolve into flex spaces meant for more than cookouts and lounging. Another example to recently blip the radar is located near the commercial heart of historic Westview, where a sizable, modern-leaning home comes with a finished Accessory Dwelling Unit in the backyard, making for a property marketed as “beautifully designed” and “exceptionally versatile.”The ADU—more of a second-story apartment with a private entrance, in this case—is located above a two-car garage and “takes this property to another level,” per sellers. With its kitchen, full bathroom, and combined living/sleeping area, the separated space is suited for guests, a home office, or potential rental income, according to the Engel & Volkers Atlanta listing. The 540 Willard Ave. SW property listed at $889,000 in late October, where the price remains today. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAThat buys five total bedrooms and four bathrooms in 3,091 square feet, in this case. It also makes it the priciest single-family property currently on the market in Westview. The property is a block from the Beltline’s Westside Trail, near KIPP Strive Academy school and just south of the forthcoming Enota Park expansion. A new plaza and Beltline connection is located just east of the home in question, near Westview’s main commercial node. Inside the property’s finished ADU. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTABeyond the rentable backyard unit, standout features of the Willard Avenue house include a two-story foyer, a custom wood range hood in the kitchen, a walk-in pantry, and an oversized primary suite upstairs, per the listing. The home was built in 2025 and first sold back in February for $785,000, per listings records. (Previous listings described the ADU as unfinished, it should be noted.) Find a quick tour in the gallery above. Location of the Westview property (in red) in relation to the Westside Trail (arrow) and other Southwest Atlanta landmarks. Google Maps**…**Follow us on social media:Twitter / Facebook/and now:Instagram • Westview news, discussion (Urbanize Atlanta)Tags540 Willard Ave. SWWestviewSouthwest AtlantaKIPP Strive AcademyADUsWestview NewsWestview HomesAtlanta Homes for SaleAccessory Dwelling UnitAccessory Dwelling UnitsAtlanta homesAtlanta Home TrendsInterior DesignWestsideWestside TrailBeltlineAtlanta BeltLineWestview Homes for SaleAtlanta DensitySarah Alsati PhotographyArtisan Real Estate MediaQuiet StreetImagesLocation of the Westview property (in red) in relation to the Westside Trail (arrow) and other Southwest Atlanta landmarks. Google MapsSarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAQuiet Street; courtesy of ENGEL & VÖLKERS ATLANTAArtisan Real Estate Media; courtesy of ENGEL & VÖLKERS ATLANTAArtisan Real Estate Media; courtesy of ENGEL & VÖLKERS ATLANTAInside the property’s finished ADU. Sarah Alsati Photography; courtesy of ENGEL & VÖLKERS ATLANTASubtitleWestview listing marks latest intown project with flex, rentable mini unit on propertyNeighborhoodWestviewBackground ImageImageBefore/After ImagesSponsored PostOff
Nike is gifting U.S. high school valedictorians a pair of custom sneakers after Mississippi’s incoming senator Scott Colom made an appeal on social media.
Nike is gifting U.S. high school valedictorians a pair of custom sneakers after Mississippi’s incoming senator Scott Colom made an appeal on social media.