#main

posts tagged #main

0

Vorwurf des Zionismus von lemmy.dbzer0.com

preview

Hallo, kürzlich hat lemmy.dbzer0.com eine Abstimmung über die Trennung von feddit.org durchgeführt und es scheint, dass sie als Ergebnis der Abstimmung beschlossen haben, eine diffamierende Zensur zu verhängen. Wie auf dem Bild zu sehen ist. Dies ist inakzeptabel, da Feddit nicht zionistisch ist und keinerlei Zionismus fördert. Dies ist eindeutig eine Verleumdung.

Ich habe mit DeepL übersetzt, da ich kein Deutsch spreche.


Hello, recently lemmy.dbzer0.com held a vote post about defederation from feddit.org and it seems they decided to make a defamatory censure as a result of the voting. As visible in the image. This is unacceptable since Feddit is not Zionist and does not promote Zionism of any kind. This is clearly defamation.

Hallo, kürzlich hat lemmy.dbzer0.com eine Abstimmung über die Trennung von feddit.org durchgeführt und es scheint, dass sie als Ergebnis der Abstimmung beschlossen haben, eine diffamierende Zensur zu verhängen. Wie auf dem Bild zu sehen ist. Dies ist inakzeptabel, da Feddit nicht zionistisch ist und keinerlei Zionismus fördert. Dies ist eindeutig eine Verleumdung.

Ich habe mit DeepL übersetzt, da ich kein Deutsch spreche.


Hello, recently lemmy.dbzer0.com held a vote post about defederation from feddit.org and it seems they decided to make a defamatory censure as a result of the voting. As visible in the image. This is unacceptable since Feddit is not Zionist and does not promote Zionism of any kind. This is clearly defamation.

0

Cannot access a community from another instance even though neither instance has each other blocked

preview

I cannot access !4tran4@sh.itjust.works from lemmy.blahaj.zone, a couple friends also had the same problem, other communities from sh.itjust.works are accessible though, and 4tran4 is accessible from other instances like lemmy.world

I cannot access !4tran4@sh.itjust.works from lemmy.blahaj.zone, a couple friends also had the same problem, other communities from sh.itjust.works are accessible though, and 4tran4 is accessible from other instances like lemmy.world

0

Keeping data out of the U.S.?

preview

Do SJW and Fedecan have an explicit commitment not to store user data in the United States? If not, is that technically feasible given the hosting available? Just to be clear, I’m not asking about data that’s obviously published (e.g. posts), but data that’s private (email addresses, IP address logs, etc). Thanks!

Do SJW and Fedecan have an explicit commitment not to store user data in the United States? If not, is that technically feasible given the hosting available? Just to be clear, I’m not asking about data that’s obviously published (e.g. posts), but data that’s private (email addresses, IP address logs, etc). Thanks!

0

Können wir uns bitte ganz schnell von chatgptjailbreak.tech deföderieren?

preview

Scheinbar die Instanz von einem transphoben Arschloch, das auch noch den Namen der wundervollen Ada missbraucht, um seinen Scheiß hier zu verteilen…

Scheinbar die Instanz von einem transphoben Arschloch, das auch noch den Namen der wundervollen Ada missbraucht, um seinen Scheiß hier zu verteilen…

0

[SOLVED] is there a way for me to reset my password if I didn't provide an email when registering?

preview

I’m only logged in on Voyager right now and there’s nowhere where I can reset my password, and I can’t log in on web to do that since I forgot my password. I didn’t provide an email when registering, am I screwed or is there any hope? Worst case scenario, this might be my push to switch to the Piefed instance I guess

EDIT: I managed to log in on my other device by ripping my token out of Voyager, yes it’s a very janky solution that probably won’t last long but it works for now

EDIT 2: Turns out, I did have an email attached to this acc, just a really obscure one I never used. Problem solved 😁

I’m only logged in on Voyager right now and there’s nowhere where I can reset my password, and I can’t log in on web to do that since I forgot my password. I didn’t provide an email when registering, am I screwed or is there any hope? Worst case scenario, this might be my push to switch to the Piefed instance I guess

EDIT: I managed to log in on my other device by ripping my token out of Voyager, yes it’s a very janky solution that probably won’t last long but it works for now

EDIT 2: Turns out, I did have an email attached to this acc, just a really obscure one I never used. Problem solved 😁

0

Wie viele Leute lesen hier einfach nur mit?

preview

Aus dem BR-Beitrag von drüben:

Generell warnen Alexandra Borchardt und auch Christian Simon aber davor, das Fediverse als neue Massenlösung zu überhöhen. Reichweiten seien noch begrenzt, auch wenn die vorhandene Nutzerschaft sehr engagiert sei. Mastodon hat weltweit aktuell über etwa 15 Millionen angemeldete Personen. Zum Vergleich: Instagram hat etwa zwei Milliarden, Facebook sogar über drei Milliarden. Entscheidend sei weniger die Ablösung der etablierten Plattformen, sondern eher eine Ergänzung.

br.de/…/social-media-ist-der-hoehepunkt-von-faceb…

Wir wissen ja auch aus überall woanders aus dem Internet, dass immer nur ein kleiner Teil der User wirklich einen Account hat. Und nur ein Bruchteil dann wirklich subscribed, liked und hochwählt. Und nur ein winziger Bruchteil der Leute nimmt wirklich aktiv teil. Reddit zeigt das auch schön - die Zahl der Impressions ist dort immer gewaltig höher als die Zahl der Votes oder Kommentare.

Das Fediverse zeigt immer nur die Interaktionen an und hat natürlich aufgrund der föderierten Natur Probleme genau festzustellen, wie häufig ein Post wirklich gesehen wurde.

Aber: Habt ihr Admins dazu irgendwelche Zahlen? Seht ihr in irgendwelchen Logs, wie viele hier wirklich mitlesen?

Aus dem BR-Beitrag von drüben:

Generell warnen Alexandra Borchardt und auch Christian Simon aber davor, das Fediverse als neue Massenlösung zu überhöhen. Reichweiten seien noch begrenzt, auch wenn die vorhandene Nutzerschaft sehr engagiert sei. Mastodon hat weltweit aktuell über etwa 15 Millionen angemeldete Personen. Zum Vergleich: Instagram hat etwa zwei Milliarden, Facebook sogar über drei Milliarden. Entscheidend sei weniger die Ablösung der etablierten Plattformen, sondern eher eine Ergänzung.

br.de/…/social-media-ist-der-hoehepunkt-von-faceb…

Wir wissen ja auch aus überall woanders aus dem Internet, dass immer nur ein kleiner Teil der User wirklich einen Account hat. Und nur ein Bruchteil dann wirklich subscribed, liked und hochwählt. Und nur ein winziger Bruchteil der Leute nimmt wirklich aktiv teil. Reddit zeigt das auch schön - die Zahl der Impressions ist dort immer gewaltig höher als die Zahl der Votes oder Kommentare.

Das Fediverse zeigt immer nur die Interaktionen an und hat natürlich aufgrund der föderierten Natur Probleme genau festzustellen, wie häufig ein Post wirklich gesehen wurde.

Aber: Habt ihr Admins dazu irgendwelche Zahlen? Seht ihr in irgendwelchen Logs, wie viele hier wirklich mitlesen?

0

[Erledigt|Completed] Wartung am Samstag 07.02. 16:00-16:30 CET | Maintenance on Saturday 07.02. 16:00-16:30 CET

preview

English below.

Wir planen Samstag ein Update der Lemmy-Version auf 0.19.15. Die Changelogs findet ihr hier: 0.19.13, 0.19.14, 0.19.15

Highlights:

  • Lemmy UI zeigt für Änderungen innerhalb der ersten 5 Minuten nach Erstellung keinen Indikator mehr an
  • Föderation von Moderationsaktionen auf gelöschten Benutzern

Wir rechnen mit einer Downtime von einigen Minuten aufgrund von Datenbankmigrationen.

Dank der persistenten Föderationswarteschlange von Lemmy gehen uns keine Aktivitäten von anderen Lemmy-Instanzen verloren. Es kann jedoch einige Minuten länger dauern, bis wir wieder mit allen Instanzen synchronisiert sind. Bei anderer Fediverse-Software könnten möglicherweise Posts, Kommentare oder Votes verloren gehen, wenn diese nicht mit der Downtime auf der Empfängerseite umgehen können.

Update 16:47 CET:

Da wir bei der Wartung noch eine kleine Änderung bei der Storageanbindung durchgeführt haben und das bei Anubis übersehen hatten hat die Wartung einige Minuten länger gedauert. Die Zeit haben wir währenddessen auch noch genutzt um archive[.]today nicht mehr beim Erstellen von Posts mit Links vorzuschlagen (Kontext). Alles sollte wieder wie erwartet laufen.


We are planning to update the Lemmy version to 0.19.15 on Saturday. The changelog can be found here: 0.19.13, 0.19.14, 0.19.15

Highlights:

  • Lemmy UI no longer shows an indicator for changes performed within 5 minutes after creation
  • federation of moderation actions for deleted users

We expect a downtime of several minutes due to database migrations.

Thanks to Lemmy’s persistent federation queue, we will not lose any activity from other Lemmy instances. However, it may take a few minutes longer until we are synchronized with all instances again. Other Fediverse software may lose posts, comments or votes if they cannot handle the downtime on the receiving end.

Update 16:47 CET:

As we did a small change on the storage connection and missed this in our Anubis config the maintenance took a few more minutes longer. We’ve also used this time to stop suggesting archive[.]today during creation of posts with links (context). Everything should be working as expected again.

English below.

Wir planen Samstag ein Update der Lemmy-Version auf 0.19.15. Die Changelogs findet ihr hier: 0.19.13, 0.19.14, 0.19.15

Highlights:

  • Lemmy UI zeigt für Änderungen innerhalb der ersten 5 Minuten nach Erstellung keinen Indikator mehr an
  • Föderation von Moderationsaktionen auf gelöschten Benutzern

Wir rechnen mit einer Downtime von einigen Minuten aufgrund von Datenbankmigrationen.

Dank der persistenten Föderationswarteschlange von Lemmy gehen uns keine Aktivitäten von anderen Lemmy-Instanzen verloren. Es kann jedoch einige Minuten länger dauern, bis wir wieder mit allen Instanzen synchronisiert sind. Bei anderer Fediverse-Software könnten möglicherweise Posts, Kommentare oder Votes verloren gehen, wenn diese nicht mit der Downtime auf der Empfängerseite umgehen können.

Update 16:47 CET:

Da wir bei der Wartung noch eine kleine Änderung bei der Storageanbindung durchgeführt haben und das bei Anubis übersehen hatten hat die Wartung einige Minuten länger gedauert. Die Zeit haben wir währenddessen auch noch genutzt um archive[.]today nicht mehr beim Erstellen von Posts mit Links vorzuschlagen (Kontext). Alles sollte wieder wie erwartet laufen.


We are planning to update the Lemmy version to 0.19.15 on Saturday. The changelog can be found here: 0.19.13, 0.19.14, 0.19.15

Highlights:

  • Lemmy UI no longer shows an indicator for changes performed within 5 minutes after creation
  • federation of moderation actions for deleted users

We expect a downtime of several minutes due to database migrations.

Thanks to Lemmy’s persistent federation queue, we will not lose any activity from other Lemmy instances. However, it may take a few minutes longer until we are synchronized with all instances again. Other Fediverse software may lose posts, comments or votes if they cannot handle the downtime on the receiving end.

Update 16:47 CET:

As we did a small change on the storage connection and missed this in our Anubis config the maintenance took a few more minutes longer. We’ve also used this time to stop suggesting archive[.]today during creation of posts with links (context). Everything should be working as expected again.

0

How do I move to Blahaj Piefed from Lemmy?

preview

I keep hearing about all of the new features that Piefed has compared to Lemmy, so I would like to try it out. However, I’m having trouble making an account.

I tried registering at piefed.blahaj.zone/auth/register

I see the note to get the token from my Lemmy account but when I click on lemmy.blahaj.zone/link I receive an error I get redirected to mllym and receive the following error: “Authentication Failed No authentication token found. Please make sure you’re accessing this page through the proper authentication flow.”

I also tried just creating an account a while back without using the token but I don’t think it ever got approved.

Thanks for any help!

I keep hearing about all of the new features that Piefed has compared to Lemmy, so I would like to try it out. However, I’m having trouble making an account.

I tried registering at piefed.blahaj.zone/auth/register

I see the note to get the token from my Lemmy account but when I click on lemmy.blahaj.zone/link I receive an error I get redirected to mllym and receive the following error: “Authentication Failed No authentication token found. Please make sure you’re accessing this page through the proper authentication flow.”

I also tried just creating an account a while back without using the token but I don’t think it ever got approved.

Thanks for any help!

0

Please consider skipping the Anubis check when a user is already logged in

preview

Dear admins,

I see that feddit has adopted Anubis for bot protection. I’m glad it was chosen instead of Cloudflare (or some other invasive service).

However, having to wait for the Anubis check before I can use the site is annoying, especially when I’m already logged in. And it happens multiple times per day, amplifying the feeling that my time is being wasted.

Will you please consider skipping the Anubis check when my browser already has a valid login cookie?

Thank you.

Dear admins,

I see that feddit has adopted Anubis for bot protection. I’m glad it was chosen instead of Cloudflare (or some other invasive service).

However, having to wait for the Anubis check before I can use the site is annoying, especially when I’m already logged in. And it happens multiple times per day, amplifying the feeling that my time is being wasted.

Will you please consider skipping the Anubis check when my browser already has a valid login cookie?

Thank you.

0

Donation banner from Lemmy Devs upon logging in

preview

When we logged in today we found this.

We would like it removed if possible, thank you.

Alt text (since we got an overflow error the ‘official’ way):

A banner with a light blue background and a X at the top right to indicate the possibility to close it.

The text says: “Support Lemmy development. An open source project the size of Lemmy needs constant work to manage the project, implement new features and fix bugs. Dessalines and Nutomic work full-time on these tasks and more. As there in no advertising or tracking, all of our work is funded through donations. Even do there is barely enough time in the day, and no time for a second job. The only available option are user donations. To keep it viable donations need to reach a minimum of 5000€ per month, resulting in a modest salary of 2500€ per developer. If that goal is reached we can stop worrying about money, and fully focus on improving the software for the benefit of all users and instances. We especially rely on recurring donations to secure the long-term development and make Lemmy the best it can be.

If you want more information before donating, consider the comparison with Reddit. It began as startup funded by rich investors. The site is managed by corporate executives who over time have become more and more disconnected from normal users. Their main goal is to make investors happy and to make a profit. This leads to user-hostile decisions like firing the employee responsible for AMAs, blocking third-party apps and more. As Reddit is a single website under a single authority, it means all users need to follow the same rules, including ridiculous ones like censoring the name “Luigi”.

Lemmy represents a new type of social media which is the complete opposite of Reddit. It is split across many different websites, each with its own rules, and managed by normal people who actually care about the users. There is no company and no profit motive. Much of the work is carried out by volunteer admins, mods and posters, who contribute out of enthusiasm and not for money. For users this is great as there is no advertising nor tracking, and no chance of takeover by a billionaire. Additionally there are no builtin political or ideological restrictions. You can use the software for any purpose you like, add your own restrictions or scrutinize its inner workings. Lemmy truly belongs to everyone.

Nutomic and Dessalines, Lemmy Developers.”

There is a slightly darker blue button under this text with the word Donate on it.

When we logged in today we found this.

We would like it removed if possible, thank you.

Alt text (since we got an overflow error the ‘official’ way):

A banner with a light blue background and a X at the top right to indicate the possibility to close it.

The text says: “Support Lemmy development. An open source project the size of Lemmy needs constant work to manage the project, implement new features and fix bugs. Dessalines and Nutomic work full-time on these tasks and more. As there in no advertising or tracking, all of our work is funded through donations. Even do there is barely enough time in the day, and no time for a second job. The only available option are user donations. To keep it viable donations need to reach a minimum of 5000€ per month, resulting in a modest salary of 2500€ per developer. If that goal is reached we can stop worrying about money, and fully focus on improving the software for the benefit of all users and instances. We especially rely on recurring donations to secure the long-term development and make Lemmy the best it can be.

If you want more information before donating, consider the comparison with Reddit. It began as startup funded by rich investors. The site is managed by corporate executives who over time have become more and more disconnected from normal users. Their main goal is to make investors happy and to make a profit. This leads to user-hostile decisions like firing the employee responsible for AMAs, blocking third-party apps and more. As Reddit is a single website under a single authority, it means all users need to follow the same rules, including ridiculous ones like censoring the name “Luigi”.

Lemmy represents a new type of social media which is the complete opposite of Reddit. It is split across many different websites, each with its own rules, and managed by normal people who actually care about the users. There is no company and no profit motive. Much of the work is carried out by volunteer admins, mods and posters, who contribute out of enthusiasm and not for money. For users this is great as there is no advertising nor tracking, and no chance of takeover by a billionaire. Additionally there are no builtin political or ideological restrictions. You can use the software for any purpose you like, add your own restrictions or scrutinize its inner workings. Lemmy truly belongs to everyone.

Nutomic and Dessalines, Lemmy Developers.”

There is a slightly darker blue button under this text with the word Donate on it.

0

I'm hoping we upgrade to BE: 0.19.15, but it seems we backtracked to BE: 0.19.13. Is it not stable or something?

preview

The latest upgrade has a ton of features I would love to use on lemmy. There must be a reason we backtracked, I was wondering what it was and if there was hope for an upgrade in the near future?

The latest upgrade has a ton of features I would love to use on lemmy. There must be a reason we backtracked, I was wondering what it was and if there was hope for an upgrade in the near future?

0

archive.today/.is/.ph/etc malware warning/survey/Umfrage

preview

English version below.

Hallo zusammen,

vor ca. 2 Wochen gab es einen Post auf Hacker News, in welchem ein DDoS der Betreiber von archive[.]today, auch auf diversen anderen Domains wie archive[.]ph oder archive[.]is vertreten, gemeldet wurde.

Der HN Post selber ist recht fragwürdig, wie man in den HN Kommentaren nachlesen kann, insbesondere hinsichtlich des Nutzernamens von dem das gepostet wurde, aber inhaltlich ist es zutreffend.

Der DDoS-Angriff wird als JavaScript Code im Browser von Besuchern der archive[.]today Webseiten ausgeführt. Effektiv werden damit die Geräte von Besuchern für den Cyberangriff missbraucht, was einen Block beim Ziel deutlich erschwert. Wer bewusst an einem Botnetz teilnimmt macht sich potentiell auch der Computersabotage nach § 303b StGB in Deutschland oder vergleichbaren Gesetzen schuldig.

Dies ist auch jetzt weiterhin der Fall, da beim Besuchen der CAPTCHA-Seite weiterhin JavaScript Code für den DDoS ausgeliefert wird, um die angegriffene Seite vielfach aufzurufen. Die meisten gängigen Content- und Werbeblocker wie uBlock Origin sollten dies standardmäßig rausfiltern, jedoch kann man nicht davon ausgehen, dass jede Person sowas nutzt, insbesondere auf Mobilgeräten.

Zunächst hat @eb@social.coop diesen Thread gepostet, mit zusätzlichen Details weiter unten im Thread. Konkret hier und hier.

Etwas später gab es eine weitere Meldung von @iampytest1@infosec.exchange, welcher auch zusätzlich die Betreiber per Email um eine Stellungnahme gebeten hat. Laut iam-py-test gab es eine Antwort, in welcher der Ausgang des Angriffs von archive[.]today zugegeben wird. Damit ist davon auszugehen dass es nicht nur ein Fall eines Kompromittierten Servers ist.

Da archive[.]today ein recht populärer Dienst zur Archivierung von Webseiten ist möchten wir nicht ohne Rücksprache mit der Community drastische Maßnahmen ergreifen. Wir haben in den letzten Tagen überlegt welche Maßnahmen wir hier ergreifen können und welche Auswirkungen diese haben werden:

  1. Hinterlegung der Domains in Lemmy’s URL-Filter
    Für lokale Nutzer werden Inhalte mit Links zu den betroffenen Domains nicht mehr erstellbar sein bis der Link entfernt wurde.
    Inhalte von Nutzern anderer Instanzen werden bei der Föderation direkt abgewiesen und sind bei uns überhaupt nicht erst sichtbar. Bei Inhalten in unseren Communities werden die Nutzer darüber auch nicht informiert, aus deren Sicht ist es nur ein Föderationsproblem, wodurch der Inhalt in der Regel nur auf der Instanz des Erstellers sichtbar bleibt.
  2. Hinterlegung der Domains in Lemmy’s Beleidigungsfilter
    Dieser Filter wertet nur Textinhalte aus, Direktlinks aus Posts zu Archivlinks (URL Feld bei der Erstellung von Posts) können hiermit nicht gefiltert werden.
    Für lokale Nutzer werden entsprechende Inhalte nicht mehr erstellbar sein bis die Domain entfernt wurde.
    Inhalte von Nutzern anderer Instanzen werden bei der Föderation zensiert, indem die betroffenen Stellen im Text durch *removed* ersetzt werden. Der Inhalt wird nur bei uns geändert, andere Instanzen ohne diese Konfiguration zeigen den ursprünglichen Inhalt an.
  3. Entfernung von betroffenen Inhalten per AutoMod
    Diese Option würde betroffene Inhalte im Modlog vermerken und würde uns auch die Möglichkeit geben weitere Logik anzubinden, wie eine PM an den betroffenen Nutzer zu senden, wenn der Inhalt in einer unserer Communities war. Für Communities von anderen Instanzen würden wir hier keine Benachrichtigungen einbauen.

Diese Maßnahmen würden sich nur auf neue Inhalte beziehen, wir haben aktuell nicht vor alte Posts und Kommentare zu entfernen o.ä.

Wir bitten hiermit um Kommentare mit euren Meinungen bis Sonntagnachmittag dazu, bevor wir auf Adminebene entscheiden wie wir letztendlich damit umgehen wollen. Primär wollen wir uns hier an Feedback von lokalen Nutzern orientieren, jedoch werden wir natürlich auch Kommentare von Nutzern anderer Instanzen berücksichtigen, da diese natürlich auch mit unseren Communities interagieren.

Zu archive[.]today gehören mindestens folgende Domains:

  • archive[.]today
  • archive[.]is
  • archive[.]ph
  • archive[.]fo
  • archive[.]li

Hello everyone,

approximately 2 weeks ago someone reported a DDoS orchestrated by the operator of archive[.]today, also known from other domains like archive[.]ph or archive[.]is, on Hacker News.

The HN post itself is questionable, as you can see in the HN comments, especially concerning the poster’s name, but the content is accurate.

The DDoS attack runs as JavaScript code in the browser of visitors of archive[.]today websites. Effectively this abuses the devices and abuses the devices of visitors for the attack. Effectively this abuses the devices of visitors for the cyberattack, which makes it a lot more challenging to block on the recipient’s side. Someone knowingly participating in a botnet may also be guilty of Computer sabotage" according to § 303b StGB in Germany or similar laws.

This is currently still ongoing, as visiting the CAPTCHA sites still delivers JavaScript code for the DDoS, to access the targeted site many times. Most commonly used content and ad blockers like uBlock Origin should already be filtering this by default, but we can’t expect everyone to use them, especially on mobile devices.

Originally, @eb@social.coop posted about the attack in this thread with additional details further down the thread. Specifically here and here.

A bit later there was another report by @iampytest1@infosec.exchange, who also reached out to the operator by email, asking for a statement. According to iam-py-test he received a response, which admits the attacks to be originating from archive[.]today. Based on this we can assume that this is not just a case of a compromised server.

As archive[.]today is a rather popular service for archival of websites we don’t want to implement drastic measures against this without community feedback. In the last days we’ve considered which actions we could take and what their impacts will be:

  1. Adding the domains to Lemmy’s URL filter
    For local users, content linking to affected domains cannot be posted anymore until the link is removed.
    Content from users on other instances will be dropped as it’s received through federation and will never appear on our instance. For content in our communities users will also not be informed, for them it will look like just a federation issue, which will typically result in the content only being visible on the instance of the creator.
  2. Adding the domains to Lemmy’s slur filter
    This filter only evaluates text content, direct links from posts to archive urls (URL field when creating a post) cannot be filtered with this.
    Local users won’t be able to post affected content until the domain has been removed.
    Content from users on other instances will be censured as it’s being processed by federation by replacing affected sections in the text with *removed*. Content will only be changed on our instance, other instances without this configuration will still show the original content.
  3. Removal of affected content via AutoMod
    This option would log affected content in modlog and would also allow us to implement additional logic, like sending a pm to users being moderated within one of our local communities. We would not notify users about content in communities on other instances.

These measures would only affect new content, we are not planning to remove or otherwise change old posts or comments.

Please comment your opinions on this until Sunday afternoon (CET), before we’ll make the final decision on admin level on how we will deal with this. Primarily we want to base our decision on the feedback from local users, but we’ll of course also consider comments from users on other instances, as they are also participating in our communities.

At least the following domains belong to archive[.]today:

  • archive[.]today
  • archive[.]is
  • archive[.]ph
  • archive[.]fo
  • archive[.]li

English version below.

Hallo zusammen,

vor ca. 2 Wochen gab es einen Post auf Hacker News, in welchem ein DDoS der Betreiber von archive[.]today, auch auf diversen anderen Domains wie archive[.]ph oder archive[.]is vertreten, gemeldet wurde.

Der HN Post selber ist recht fragwürdig, wie man in den HN Kommentaren nachlesen kann, insbesondere hinsichtlich des Nutzernamens von dem das gepostet wurde, aber inhaltlich ist es zutreffend.

Der DDoS-Angriff wird als JavaScript Code im Browser von Besuchern der archive[.]today Webseiten ausgeführt. Effektiv werden damit die Geräte von Besuchern für den Cyberangriff missbraucht, was einen Block beim Ziel deutlich erschwert. Wer bewusst an einem Botnetz teilnimmt macht sich potentiell auch der Computersabotage nach § 303b StGB in Deutschland oder vergleichbaren Gesetzen schuldig.

Dies ist auch jetzt weiterhin der Fall, da beim Besuchen der CAPTCHA-Seite weiterhin JavaScript Code für den DDoS ausgeliefert wird, um die angegriffene Seite vielfach aufzurufen. Die meisten gängigen Content- und Werbeblocker wie uBlock Origin sollten dies standardmäßig rausfiltern, jedoch kann man nicht davon ausgehen, dass jede Person sowas nutzt, insbesondere auf Mobilgeräten.

Zunächst hat @eb@social.coop diesen Thread gepostet, mit zusätzlichen Details weiter unten im Thread. Konkret hier und hier.

Etwas später gab es eine weitere Meldung von @iampytest1@infosec.exchange, welcher auch zusätzlich die Betreiber per Email um eine Stellungnahme gebeten hat. Laut iam-py-test gab es eine Antwort, in welcher der Ausgang des Angriffs von archive[.]today zugegeben wird. Damit ist davon auszugehen dass es nicht nur ein Fall eines Kompromittierten Servers ist.

Da archive[.]today ein recht populärer Dienst zur Archivierung von Webseiten ist möchten wir nicht ohne Rücksprache mit der Community drastische Maßnahmen ergreifen. Wir haben in den letzten Tagen überlegt welche Maßnahmen wir hier ergreifen können und welche Auswirkungen diese haben werden:

  1. Hinterlegung der Domains in Lemmy’s URL-Filter
    Für lokale Nutzer werden Inhalte mit Links zu den betroffenen Domains nicht mehr erstellbar sein bis der Link entfernt wurde.
    Inhalte von Nutzern anderer Instanzen werden bei der Föderation direkt abgewiesen und sind bei uns überhaupt nicht erst sichtbar. Bei Inhalten in unseren Communities werden die Nutzer darüber auch nicht informiert, aus deren Sicht ist es nur ein Föderationsproblem, wodurch der Inhalt in der Regel nur auf der Instanz des Erstellers sichtbar bleibt.
  2. Hinterlegung der Domains in Lemmy’s Beleidigungsfilter
    Dieser Filter wertet nur Textinhalte aus, Direktlinks aus Posts zu Archivlinks (URL Feld bei der Erstellung von Posts) können hiermit nicht gefiltert werden.
    Für lokale Nutzer werden entsprechende Inhalte nicht mehr erstellbar sein bis die Domain entfernt wurde.
    Inhalte von Nutzern anderer Instanzen werden bei der Föderation zensiert, indem die betroffenen Stellen im Text durch *removed* ersetzt werden. Der Inhalt wird nur bei uns geändert, andere Instanzen ohne diese Konfiguration zeigen den ursprünglichen Inhalt an.
  3. Entfernung von betroffenen Inhalten per AutoMod
    Diese Option würde betroffene Inhalte im Modlog vermerken und würde uns auch die Möglichkeit geben weitere Logik anzubinden, wie eine PM an den betroffenen Nutzer zu senden, wenn der Inhalt in einer unserer Communities war. Für Communities von anderen Instanzen würden wir hier keine Benachrichtigungen einbauen.

Diese Maßnahmen würden sich nur auf neue Inhalte beziehen, wir haben aktuell nicht vor alte Posts und Kommentare zu entfernen o.ä.

Wir bitten hiermit um Kommentare mit euren Meinungen bis Sonntagnachmittag dazu, bevor wir auf Adminebene entscheiden wie wir letztendlich damit umgehen wollen. Primär wollen wir uns hier an Feedback von lokalen Nutzern orientieren, jedoch werden wir natürlich auch Kommentare von Nutzern anderer Instanzen berücksichtigen, da diese natürlich auch mit unseren Communities interagieren.

Zu archive[.]today gehören mindestens folgende Domains:

  • archive[.]today
  • archive[.]is
  • archive[.]ph
  • archive[.]fo
  • archive[.]li

Hello everyone,

approximately 2 weeks ago someone reported a DDoS orchestrated by the operator of archive[.]today, also known from other domains like archive[.]ph or archive[.]is, on Hacker News.

The HN post itself is questionable, as you can see in the HN comments, especially concerning the poster’s name, but the content is accurate.

The DDoS attack runs as JavaScript code in the browser of visitors of archive[.]today websites. Effectively this abuses the devices and abuses the devices of visitors for the attack. Effectively this abuses the devices of visitors for the cyberattack, which makes it a lot more challenging to block on the recipient’s side. Someone knowingly participating in a botnet may also be guilty of Computer sabotage" according to § 303b StGB in Germany or similar laws.

This is currently still ongoing, as visiting the CAPTCHA sites still delivers JavaScript code for the DDoS, to access the targeted site many times. Most commonly used content and ad blockers like uBlock Origin should already be filtering this by default, but we can’t expect everyone to use them, especially on mobile devices.

Originally, @eb@social.coop posted about the attack in this thread with additional details further down the thread. Specifically here and here.

A bit later there was another report by @iampytest1@infosec.exchange, who also reached out to the operator by email, asking for a statement. According to iam-py-test he received a response, which admits the attacks to be originating from archive[.]today. Based on this we can assume that this is not just a case of a compromised server.

As archive[.]today is a rather popular service for archival of websites we don’t want to implement drastic measures against this without community feedback. In the last days we’ve considered which actions we could take and what their impacts will be:

  1. Adding the domains to Lemmy’s URL filter
    For local users, content linking to affected domains cannot be posted anymore until the link is removed.
    Content from users on other instances will be dropped as it’s received through federation and will never appear on our instance. For content in our communities users will also not be informed, for them it will look like just a federation issue, which will typically result in the content only being visible on the instance of the creator.
  2. Adding the domains to Lemmy’s slur filter
    This filter only evaluates text content, direct links from posts to archive urls (URL field when creating a post) cannot be filtered with this.
    Local users won’t be able to post affected content until the domain has been removed.
    Content from users on other instances will be censured as it’s being processed by federation by replacing affected sections in the text with *removed*. Content will only be changed on our instance, other instances without this configuration will still show the original content.
  3. Removal of affected content via AutoMod
    This option would log affected content in modlog and would also allow us to implement additional logic, like sending a pm to users being moderated within one of our local communities. We would not notify users about content in communities on other instances.

These measures would only affect new content, we are not planning to remove or otherwise change old posts or comments.

Please comment your opinions on this until Sunday afternoon (CET), before we’ll make the final decision on admin level on how we will deal with this. Primarily we want to base our decision on the feedback from local users, but we’ll of course also consider comments from users on other instances, as they are also participating in our communities.

At least the following domains belong to archive[.]today:

  • archive[.]today
  • archive[.]is
  • archive[.]ph
  • archive[.]fo
  • archive[.]li
0

Lemmy v0.19.15 is available with DDoS prevention

preview

And Lemmy version 1 is on the horizon

Lemmy Release v0.19.14

Changes

Recently some malicious users started to use an exploit where they would post rule violating content and then delete the account. This would prevent admins and mods from viewing the user profile to find other posts, and would also prevent federation of ban actions.

The new release fixes these problems. Thanks to @flamingos-cant for contributing to solve this. Upgrade instructions

There are no breaking changes with this release.

Follow the upgrade instructions for ansible or docker.

Lemmy Release v0.19.15 and Testing for 1.0

Changes

We messed up the previous release and did not include the full list of changes. In fact there were a handful of other bug fixes, and notably a maximum page limit of 10 to prevent a DDoS attack. Some users were also hitting this limit, so with this version the limit is increased to 100. We apologize for these mistakes.

Here is the full changelog since 0.19.13:

  • Don’t allow accessing page numbers greater than 10 by @dessalines #6017
  • Update deps based on cargo audit by @Nutomic in #6258
  • Increase page limit to 100 by @Nutomic in #6252
  • Ban federation for deleted users by @Nutomic in #6207
  • Federate mod actions on deleted users by @Nutomic in #6199
  • Allow admins to view deleted user profiles by @Nutomic in #6194
  • Adding creator and community indexes for post_aggregates. by @dessalines in #6025
  • Ignore apub person banners which cannot be parsed by @Nutomic in #6015u

Lemmy 1.0

Now for the good news, the development version of Lemmy 1.0 is available for testing on voyager.lemmy.ml with lots of new features. Registration is open, you’re welcome to create an account. Feel free to post spam and try everything out. Here is only a short overview:

Multi-communities: Combine different communities together into a custom feed.
Post scheduling: Specify when your post should be published.
Keyword filter: Automatically hide posts about certain topics.
Private communities: Only followers can view the content, and need to be approved manually by mods. Other community visibilities are also available (unlisted, local only).
New notification system: Including notifications for mod actions, and subscribing to communities and posts to be notified about new comments.
OAuth: Login to Lemmy with existing account from another website. Use this link to signup with your Github account (the UI still needs to be improved).
Post Tags: Categorize posts within a community (UI part not implemented yet).
User vote totals: You can see the total number of upvotes and downvotes given to each user.
User notes: You can keep notes on other users.
Combined Feeds: View your saved, liked posts and comments together in a single list.
Comment Locking: Mods can now lock comments recursively.
GDPR style data exporting: You can now export your full posting history as a JSON file.
Plugins: Can be written in JS, Python, Rust, and any other language that targets Webassembly. The test server has a plugin for automatic language tagging of posts.
Cursor pagination: Don’t lose your place in the feed when switching pages.
API v3 compat: Lemmy 1.0 can be used by existing apps with no changes (but most new features are only available via the new API v4).
More: Countless smaller features, bug fixes and improvements, too much to list here.

All the above mentioned features are already implemented and fully working, but may need some polishing. If you encounter any problems, please open an issue (backend, frontend). voyager.lemmy.ml is automatically updated to the latest development version every night, so that changes can immediately be tested.

Keep in mind that Lemmy 1.0 is still in alpha state. There may be breaking changes and critical bugs, so do not attempt to upgrade your own instances yet. We intend to publish the first beta version in January, along with API docs and upgrade instructions for test servers.

We hope that you are as excited about these new features as we are. With all this said, happy testing and Merry Christmas! Upgrade instructions

There are no breaking changes with this release.

Follow the upgrade instructions for ansible or docker.

And Lemmy version 1 is on the horizon

Lemmy Release v0.19.14

Changes

Recently some malicious users started to use an exploit where they would post rule violating content and then delete the account. This would prevent admins and mods from viewing the user profile to find other posts, and would also prevent federation of ban actions.

The new release fixes these problems. Thanks to @flamingos-cant for contributing to solve this. Upgrade instructions

There are no breaking changes with this release.

Follow the upgrade instructions for ansible or docker.

Lemmy Release v0.19.15 and Testing for 1.0

Changes

We messed up the previous release and did not include the full list of changes. In fact there were a handful of other bug fixes, and notably a maximum page limit of 10 to prevent a DDoS attack. Some users were also hitting this limit, so with this version the limit is increased to 100. We apologize for these mistakes.

Here is the full changelog since 0.19.13:

  • Don’t allow accessing page numbers greater than 10 by @dessalines #6017
  • Update deps based on cargo audit by @Nutomic in #6258
  • Increase page limit to 100 by @Nutomic in #6252
  • Ban federation for deleted users by @Nutomic in #6207
  • Federate mod actions on deleted users by @Nutomic in #6199
  • Allow admins to view deleted user profiles by @Nutomic in #6194
  • Adding creator and community indexes for post_aggregates. by @dessalines in #6025
  • Ignore apub person banners which cannot be parsed by @Nutomic in #6015u

Lemmy 1.0

Now for the good news, the development version of Lemmy 1.0 is available for testing on voyager.lemmy.ml with lots of new features. Registration is open, you’re welcome to create an account. Feel free to post spam and try everything out. Here is only a short overview:

Multi-communities: Combine different communities together into a custom feed.
Post scheduling: Specify when your post should be published.
Keyword filter: Automatically hide posts about certain topics.
Private communities: Only followers can view the content, and need to be approved manually by mods. Other community visibilities are also available (unlisted, local only).
New notification system: Including notifications for mod actions, and subscribing to communities and posts to be notified about new comments.
OAuth: Login to Lemmy with existing account from another website. Use this link to signup with your Github account (the UI still needs to be improved).
Post Tags: Categorize posts within a community (UI part not implemented yet).
User vote totals: You can see the total number of upvotes and downvotes given to each user.
User notes: You can keep notes on other users.
Combined Feeds: View your saved, liked posts and comments together in a single list.
Comment Locking: Mods can now lock comments recursively.
GDPR style data exporting: You can now export your full posting history as a JSON file.
Plugins: Can be written in JS, Python, Rust, and any other language that targets Webassembly. The test server has a plugin for automatic language tagging of posts.
Cursor pagination: Don’t lose your place in the feed when switching pages.
API v3 compat: Lemmy 1.0 can be used by existing apps with no changes (but most new features are only available via the new API v4).
More: Countless smaller features, bug fixes and improvements, too much to list here.

All the above mentioned features are already implemented and fully working, but may need some polishing. If you encounter any problems, please open an issue (backend, frontend). voyager.lemmy.ml is automatically updated to the latest development version every night, so that changes can immediately be tested.

Keep in mind that Lemmy 1.0 is still in alpha state. There may be breaking changes and critical bugs, so do not attempt to upgrade your own instances yet. We intend to publish the first beta version in January, along with API docs and upgrade instructions for test servers.

We hope that you are as excited about these new features as we are. With all this said, happy testing and Merry Christmas! Upgrade instructions

There are no breaking changes with this release.

Follow the upgrade instructions for ansible or docker.

0

Ankündigung / Announcement feddit.org: Änderung IP Adresse / Change of IP address - 2026-01-30

preview

Ankündigung: Änderung IP der Adresse von feddit.org

English version below!

Ablauf der Wartungsarbeiten

Am Freitag, den 30.01.2026, wird sich im Laufe des Tages die IP Adresse von feddit.org von 146.255.56.83 auf 146.255.56.93 ändern.

Grund dafür ist, dass wir die komplette Instanz auf einen neuen Kubernetes-Cluster umziehen. Die Migration wird so verlaufen, dass wir im ersten Schritt feddit.org auf beiden IPs parallel erreichbar machen werden (die Datenbackends für Text und Bilder sind ident und sowohl vom alten als auch vom neuen Cluster aus erreichbar).

Wir werden dann beobachten, wie viele Zugriffe noch über die alte IP Adresse erfolgen, und dann entscheiden, wann wir den alten Cluster komplett abschalten können. Geplant ist aktuell eine Übergangszeit von ca. einer Woche. Damit sollte die Migration für alle Benutzer, unabhängig von DNS Caches etc. transparent verlaufen.

Änderungen am Bot-Schutz

Wie ihr vermutlich wisst, versuchen Bots der LLM-Firmen (OpenAI, Antropic etc.) aggressiv Websites nach Inhalten zu durchsuchen, und verursachen dadurch immer wieder Performance- und Zugriffsprobleme. Aus diesem Grund schützen wir feddit.org in Zukunft mit Anubis. Dabei muss der Browser eine einfache “proof-of-work” Aufgabe lösen, bevor Inhalte präsentiert werden. Bei der “normalen” Verwendung von feddit.org fällt diese Maßnahme nicht ins Gewicht, hat sich aber als sehr effizient bei der Abwehr von Bots erwiesen.

Weiters heben wir auch die weitreichenden IP-Blockaden für gewisse “problematische” Netzblöcke auf - feddit.org ist damit wieder uneingeschränkt und weltweit erreichbar. Auch die Probleme, dass Bilder von feddit.org auf anderen Instanzen unter Umständen nicht geladen werden können, sollte damit gelöst sein.

Weitere Schritte

Nachgelagert werden wir die alte Instanz abschalten, und mit einer Infoseite für die Änderung ersetzen, falls dort noch Traffic aufschlagen sollte.

Danach werden wir in einem nachgelagerten Wartungsfenster feddit.org auf die aktuellste Lemmy Version aktualisieren. Dafür wird es noch eine separate Information geben.

Viele Grüße, euer

feddit.org Admin Team


Announcement: IP Address Change for feddit.org

English version below!

Maintenance Schedule

On Friday, January 30, 2026, the IP address for feddit.org will change from 146.255.56.83 to 146.255.56.93 over the course of the day.

The reason for this is that we are moving the entire instance to a new Kubernetes cluster. The migration will proceed as follows: in the first step, we will make feddit.org accessible on both IPs in parallel (the data backends for text and images are identical and accessible from both the old and new clusters).

We will then monitor how many accesses are still occurring via the old IP address and decide when we can completely shut down the old cluster. Currently, a transition period of about one week is planned. This should make the migration transparent for all users, regardless of DNS caches, etc.

Changes to Bot Protection

As you probably know, bots from LLM companies (OpenAI, Anthropic, etc.) aggressively try to crawl websites for content, repeatedly causing performance and access issues. For this reason, we will protect feddit.org in the future with Anubis. This requires the browser to solve a simple “proof-of-work” task before content is presented. For “normal” use of feddit.org, this measure is not noticeable but has proven very effective in defending against bots.

Furthermore, we are also lifting the extensive IP blocks for certain “problematic” network ranges - feddit.org will thus be fully accessible again worldwide. The issues where images from feddit.org might not load on other instances should also be resolved.

Next Steps

Subsequently, we will shut down the old instance and replace it with an information page about the change, in case any traffic still lands there.

After that, we will update feddit.org to the latest Lemmy version in a subsequent maintenance window. There will be a separate announcement for that.

Best regards, your

feddit.org Admin Team

Ankündigung: Änderung IP der Adresse von feddit.org

English version below!

Ablauf der Wartungsarbeiten

Am Freitag, den 30.01.2026, wird sich im Laufe des Tages die IP Adresse von feddit.org von 146.255.56.83 auf 146.255.56.93 ändern.

Grund dafür ist, dass wir die komplette Instanz auf einen neuen Kubernetes-Cluster umziehen. Die Migration wird so verlaufen, dass wir im ersten Schritt feddit.org auf beiden IPs parallel erreichbar machen werden (die Datenbackends für Text und Bilder sind ident und sowohl vom alten als auch vom neuen Cluster aus erreichbar).

Wir werden dann beobachten, wie viele Zugriffe noch über die alte IP Adresse erfolgen, und dann entscheiden, wann wir den alten Cluster komplett abschalten können. Geplant ist aktuell eine Übergangszeit von ca. einer Woche. Damit sollte die Migration für alle Benutzer, unabhängig von DNS Caches etc. transparent verlaufen.

Änderungen am Bot-Schutz

Wie ihr vermutlich wisst, versuchen Bots der LLM-Firmen (OpenAI, Antropic etc.) aggressiv Websites nach Inhalten zu durchsuchen, und verursachen dadurch immer wieder Performance- und Zugriffsprobleme. Aus diesem Grund schützen wir feddit.org in Zukunft mit Anubis. Dabei muss der Browser eine einfache “proof-of-work” Aufgabe lösen, bevor Inhalte präsentiert werden. Bei der “normalen” Verwendung von feddit.org fällt diese Maßnahme nicht ins Gewicht, hat sich aber als sehr effizient bei der Abwehr von Bots erwiesen.

Weiters heben wir auch die weitreichenden IP-Blockaden für gewisse “problematische” Netzblöcke auf - feddit.org ist damit wieder uneingeschränkt und weltweit erreichbar. Auch die Probleme, dass Bilder von feddit.org auf anderen Instanzen unter Umständen nicht geladen werden können, sollte damit gelöst sein.

Weitere Schritte

Nachgelagert werden wir die alte Instanz abschalten, und mit einer Infoseite für die Änderung ersetzen, falls dort noch Traffic aufschlagen sollte.

Danach werden wir in einem nachgelagerten Wartungsfenster feddit.org auf die aktuellste Lemmy Version aktualisieren. Dafür wird es noch eine separate Information geben.

Viele Grüße, euer

feddit.org Admin Team


Announcement: IP Address Change for feddit.org

English version below!

Maintenance Schedule

On Friday, January 30, 2026, the IP address for feddit.org will change from 146.255.56.83 to 146.255.56.93 over the course of the day.

The reason for this is that we are moving the entire instance to a new Kubernetes cluster. The migration will proceed as follows: in the first step, we will make feddit.org accessible on both IPs in parallel (the data backends for text and images are identical and accessible from both the old and new clusters).

We will then monitor how many accesses are still occurring via the old IP address and decide when we can completely shut down the old cluster. Currently, a transition period of about one week is planned. This should make the migration transparent for all users, regardless of DNS caches, etc.

Changes to Bot Protection

As you probably know, bots from LLM companies (OpenAI, Anthropic, etc.) aggressively try to crawl websites for content, repeatedly causing performance and access issues. For this reason, we will protect feddit.org in the future with Anubis. This requires the browser to solve a simple “proof-of-work” task before content is presented. For “normal” use of feddit.org, this measure is not noticeable but has proven very effective in defending against bots.

Furthermore, we are also lifting the extensive IP blocks for certain “problematic” network ranges - feddit.org will thus be fully accessible again worldwide. The issues where images from feddit.org might not load on other instances should also be resolved.

Next Steps

Subsequently, we will shut down the old instance and replace it with an information page about the change, in case any traffic still lands there.

After that, we will update feddit.org to the latest Lemmy version in a subsequent maintenance window. There will be a separate announcement for that.

Best regards, your

feddit.org Admin Team

0

Can we put shitjustworks behind a captcha?

preview

For me at least, for months now, this instance is unavailable for multiple hours a day. Given the recent posts about the lemmy eco system being on a slight downwards trend, I don’t think this additional load is caused by more users using this instance. Rather, I think that AI scrapers are using this instance to scrape lemmy. If I am correct, though only someone with access to the logs can check, I’d like to kindly ask for some sort of protection from AI scrapers. Both because I like being able to actually browse the instance and because I hate AI companies.

For me at least, for months now, this instance is unavailable for multiple hours a day. Given the recent posts about the lemmy eco system being on a slight downwards trend, I don’t think this additional load is caused by more users using this instance. Rather, I think that AI scrapers are using this instance to scrape lemmy. If I am correct, though only someone with access to the logs can check, I’d like to kindly ask for some sort of protection from AI scrapers. Both because I like being able to actually browse the instance and because I hate AI companies.

0

mlmym breaks Blahaj?

preview

I’m fairly new to Blahaj and was trying out the different interfaces for a couple of days by choosing “once” on different ones to feel it out. I decided that I liked the old Reddit style and selected “always” on mlmym.

I didn’t have any problems when I was selecting “once” for mlmym, but when I chose “always”, it crapped itself. Immediately afterward, I was no longer able to access Blahaj.

I see myself logged in on the top right, but the page says “unable to retrieve site. there doesn’t seem to be anything here”

I get this same error when checking through Chrome, Firefox, and Tor, even if I’m not logged in. If I do try to log in on another browser, I put in my credentials and get the “unable to retrieve site” error and it does not log me in.

I can only access Blahaj again by using a direct link to a sub with a different interface prefix (lem.lemmy.blahaj.zone/c/main for example).

Sometimes I’m able to quickly hit “cancel redirect” on the default page that comes up when it’s trying to push to mlmym.

I’ve changed it to “always” on Blorp instead and it works fine, but I’d really rather use mlmym.

Is there a fix for this?

I’m fairly new to Blahaj and was trying out the different interfaces for a couple of days by choosing “once” on different ones to feel it out. I decided that I liked the old Reddit style and selected “always” on mlmym.

I didn’t have any problems when I was selecting “once” for mlmym, but when I chose “always”, it crapped itself. Immediately afterward, I was no longer able to access Blahaj.

I see myself logged in on the top right, but the page says “unable to retrieve site. there doesn’t seem to be anything here”

I get this same error when checking through Chrome, Firefox, and Tor, even if I’m not logged in. If I do try to log in on another browser, I put in my credentials and get the “unable to retrieve site” error and it does not log me in.

I can only access Blahaj again by using a direct link to a sub with a different interface prefix (lem.lemmy.blahaj.zone/c/main for example).

Sometimes I’m able to quickly hit “cancel redirect” on the default page that comes up when it’s trying to push to mlmym.

I’ve changed it to “always” on Blorp instead and it works fine, but I’d really rather use mlmym.

Is there a fix for this?

0

Archive.today / archive.ph

preview

Wir nutzen hier ja häufig diese beiden Seiten. Nun scheinen sie gerade Malware auszuspielen bzw. die Seite als Botnet zu missbrauchen. Die Details und Diskussionen dazu gibt es hier:

social.coop/@eb/115902323900229756

infosec.exchange/@iampytest1/115902693235671566

news.ycombinator.com/item?id=46624740

Seid also vorsichtig bei der Nutzung bzw. nutzt die Seiten lieber vorerst nicht und wartet die aktuellen Entwicklungen ab.

Wir nutzen hier ja häufig diese beiden Seiten. Nun scheinen sie gerade Malware auszuspielen bzw. die Seite als Botnet zu missbrauchen. Die Details und Diskussionen dazu gibt es hier:

social.coop/@eb/115902323900229756

infosec.exchange/@iampytest1/115902693235671566

news.ycombinator.com/item?id=46624740

Seid also vorsichtig bei der Nutzung bzw. nutzt die Seiten lieber vorerst nicht und wartet die aktuellen Entwicklungen ab.

0

Zusätzliche Piefed Instanz?

preview

Sorry, falls das OT für den Haupteingang ist, aber es geht ja erstmal um die lokale Perspektive.

Vor ein paar Monaten fragte das @mormund@feddit.org mit Hinblick auf die Devs. Mich würde auch ganz allgemein interessieren, ob die Fediverse Foundation sich das vorstellen kann.

Bis jetzt gibt es keine deutschsprachige Piefed Instanz und so eine wäre für deutschsprachige Communities glaube ich schon passender als die bestehenden. Eine Stabilität wie durch die Foundation und die Admins hier wäre da optimal.

Umgekehrt könnte man sich so als ‘Netzwerk von Personen’ gelassen anschauen, welche Software sich besser entwickelt und auch einfach Erfahrung sammeln. Die Inhalte werden ja eh geschwisterlich geteilt.

Falls die Foundation ihrerseits zum Mehraufwand bereit wäre, könnte man Admins suchen, um die Arbeit möglichst zu verteilen.

Sorry, falls das OT für den Haupteingang ist, aber es geht ja erstmal um die lokale Perspektive.

Vor ein paar Monaten fragte das @mormund@feddit.org mit Hinblick auf die Devs. Mich würde auch ganz allgemein interessieren, ob die Fediverse Foundation sich das vorstellen kann.

Bis jetzt gibt es keine deutschsprachige Piefed Instanz und so eine wäre für deutschsprachige Communities glaube ich schon passender als die bestehenden. Eine Stabilität wie durch die Foundation und die Admins hier wäre da optimal.

Umgekehrt könnte man sich so als ‘Netzwerk von Personen’ gelassen anschauen, welche Software sich besser entwickelt und auch einfach Erfahrung sammeln. Die Inhalte werden ja eh geschwisterlich geteilt.

Falls die Foundation ihrerseits zum Mehraufwand bereit wäre, könnte man Admins suchen, um die Arbeit möglichst zu verteilen.

0

Fedecan Instance Census 2025 will close in a few days! You have until January 15th to fill it out

preview

We will be closing the census this week, on January 15th, 2026.

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey! While this census is being run by the admins of lemmy.ca, sh.itjust.works, piefed.ca, and pixelfed.ca, you do not need to have an account on these instances, and you do not need to be located in Canada. If you do have an account on one of our instances, you can indicate that on the census to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank.

Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on the main/meta communities in our instances.

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year. The banner image was made with icons from flaticon.com.


Due to some issues with the survey platform, you won’t be able to click on external URLs while completing the census. You can access those links here:

We will be closing the census this week, on January 15th, 2026.

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey! While this census is being run by the admins of lemmy.ca, sh.itjust.works, piefed.ca, and pixelfed.ca, you do not need to have an account on these instances, and you do not need to be located in Canada. If you do have an account on one of our instances, you can indicate that on the census to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank.

Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on the main/meta communities in our instances.

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year. The banner image was made with icons from flaticon.com.


Due to some issues with the survey platform, you won’t be able to click on external URLs while completing the census. You can access those links here:

0

Any plans to set up a piefed instance?

preview

Piefed is starting to look more attractive in comparison with lemmy. While it’s missing some features I’d like, it’s also got a lot of new stuff that lemmy doesn’t have, and it’s progressing a lot faster. I know several major lemmy instances have set up a piefed as well, do we have any plans to do so?

Piefed is starting to look more attractive in comparison with lemmy. While it’s missing some features I’d like, it’s also got a lot of new stuff that lemmy doesn’t have, and it’s progressing a lot faster. I know several major lemmy instances have set up a piefed as well, do we have any plans to do so?

0

Blåhaj zone - the nitty gritty.

preview

Hey all! You asked for it, so here it is. I’ma drop a diagram here and will refer to it throughout the rest of this post:

Our infrastructure

In simple terms, the way it all works is we have our protected servers in the backend.

PERSISTENCE

We run our postgres database defensively with 3 dedicated (metal) servers, the main servers each have 2× 1.92TB enterprise-grade NVMe drives mirrored (RAID-1).

We use patroni + percona postgres to manage the cluster. Each instance has a software watchdog to trip-wire a failure.

Scripts automate promotion to make sure under normal circumstances (healthy cluster) that the main server, our big EPYC 7401P 128GiB DDR4(ECC) i350 NIC is the primary.

We have a second server which is a less-powerful i9-12900K 128Gib DDR4(non-ECC) i219v NIC that acts as a read-only secondary, and gets promoted to primary on failover.

Then there’s the little server that replicates for backups and potential dual-failure disaster scenarios, a meager Ryzen 7 3700X 64GiB DDR4(ECC) i210 NIC and it has 2× 8TB enterprise-grade spinny disks striped (RAID-0), to keep the DB and backups safe.

It will become primary if the other 2 servers cannot.

The database servers are not connected to directly by any of our services, there’s instead a load balancer in front which targets the 3× server’s HAProxy instances that have one port directed at the current primary and another port for the current secondary.

This database infrastructure is the biggest, costliest and most engineered part of our setup (which is very frugal for what it is). It’s taken me through a near catastrauphic situation (double server failure). You can ask Ada… I was freaking the fuck out.

Additionally we have a single Redis instance which runs on a quad CPU ARM (Ampere) 8GiB RAM 80GB SSD.

  • Primary server: €83.70/m
  • Secondary server: €61.70/m
  • Backup server: €40.70/m
  • Load balancer: €5.39/m
  • Redis: €6.49/m
  • Total: €197.98/m (AUD ~$350) for the persistence layer.

APPLICATION

We then have a prometheus/grafana monitoring box at another €6.49/m.

Then we have the services which run just like everyone else on various pieces of hardware, in docker containers for most, but some run standalone on their own hosts. Sharkey €24.49, Lemmy €12.49/m, Synapse €12.49/m, everything else smaller (pyfedi, pixelfed, friendica, photon frontend, various different static frontends, Ada’s latest project of the week) runs on a single dedicated docker host costing €38.70/m.

That brings us to another €101.15/m for the application layer.

EDGE

Then under that we now have the edge nodes, which are completely standalone and do not have internal VPCs etc, it’s TLS in, TLS out for these machines.

Each node is generally around 2× vCPU 1GB RAM 25GB SSD 2TB bandwidth for around €6/m. We have 4, so that’s around €24/m all up.

End user flow

So when you vist the site, you will first typically hit our DNS server. Our DNS server uses the requesting IP, or EDNS client subnet provided to work out which healthy node is closest to your region, and gives you back that IP address.

Side note: It’s important to realise that up until this point, what domain you requested is known to yourself and the DNS provider you used. If you care about privacy, you should install a pihole (you can install it in a docker container, you don’t need a raspberry pi), and set it’s upstream DNS to Quad9 with ECS and DNSSEC enabled (or if you’re really adventurous, install your own unbound server and bypass intermediaries completely).

We run a dual-stack IPv4/IPv6 network all the way through so if you’re on IPv6, you’ll get our v6 IPs, and hopefully enjoy a less NATted, wider MTU’d, packet un-fragmented journey through the internet.

Once you have the IP address from the DNS server, you will connect to the caching caddy server on the closest healthy node to your geographical location and it will terminate your TLS session, decrypting your request.

At this point we’ll see if we have the asset to the request you made cached locally, if so we can send it straight back to you, super quickly!

If not then it will connect to the upstream server in our core location over a (presumably) much larger, less latent and more resilient trunk pipe than most consumer-grade bandwidth will provide. (Unless you run your own redundant-path dark fibre into your house, which I’m not discounting entirely… I know people.)

The returned response will then be evaluated for cacheability and sent back to you.

The build

We wanted to make sure that if one of these endpoints degrade / get attacked / shut down / die, that we can spin up a new one really quick. So the deployment and configuration is completely managed by an Ansible configuration. The deployment of a single node or even a complete replacement of all nodes takes about 10 minutes.

Our nodes run 2 pieces of third party software, and a few scripts to manage things.

DNS

For the DNS resolution we run gdnsd with 2 plugins, http_status and geoip.

The http_status plugin monitors the health of the other nodes to make sure it’s not sending people to nodes that don’t respond.

The geoip plugin uses the requesting IP to determine what region/country you’re from, and select a priority list of nodes closes to that region. The first healthy node in that list is the node that’s selected.

CACHING REVERSE-PROXY

For the web-serving component, we run a custom xcaddy compiled caddy server with a few modules included: cache-handler, otter storage, coraza WAF, ratelimit, layer4, maxmind and crowdsec.

At the moment only the first 3 are in use, but the other 4 are included in case we need to mitigate attacks or other edge cases in the future.

And that’s pretty much it!

If anyone wants any help with setting up their own version of this, or needs more details, let me know. I’d be happy to help.

If a lot of people are interested (which I doubt at this stage, but who knows?) I’d even be willing to create a project or make it dockerisable etc, but I suspect that it’s something that most people would just use Cloudflare et. al. for, if the privacy aspect wasn’t such a concern.

Hey all! You asked for it, so here it is. I’ma drop a diagram here and will refer to it throughout the rest of this post:

Our infrastructure

In simple terms, the way it all works is we have our protected servers in the backend.

PERSISTENCE

We run our postgres database defensively with 3 dedicated (metal) servers, the main servers each have 2× 1.92TB enterprise-grade NVMe drives mirrored (RAID-1).

We use patroni + percona postgres to manage the cluster. Each instance has a software watchdog to trip-wire a failure.

Scripts automate promotion to make sure under normal circumstances (healthy cluster) that the main server, our big EPYC 7401P 128GiB DDR4(ECC) i350 NIC is the primary.

We have a second server which is a less-powerful i9-12900K 128Gib DDR4(non-ECC) i219v NIC that acts as a read-only secondary, and gets promoted to primary on failover.

Then there’s the little server that replicates for backups and potential dual-failure disaster scenarios, a meager Ryzen 7 3700X 64GiB DDR4(ECC) i210 NIC and it has 2× 8TB enterprise-grade spinny disks striped (RAID-0), to keep the DB and backups safe.

It will become primary if the other 2 servers cannot.

The database servers are not connected to directly by any of our services, there’s instead a load balancer in front which targets the 3× server’s HAProxy instances that have one port directed at the current primary and another port for the current secondary.

This database infrastructure is the biggest, costliest and most engineered part of our setup (which is very frugal for what it is). It’s taken me through a near catastrauphic situation (double server failure). You can ask Ada… I was freaking the fuck out.

Additionally we have a single Redis instance which runs on a quad CPU ARM (Ampere) 8GiB RAM 80GB SSD.

  • Primary server: €83.70/m
  • Secondary server: €61.70/m
  • Backup server: €40.70/m
  • Load balancer: €5.39/m
  • Redis: €6.49/m
  • Total: €197.98/m (AUD ~$350) for the persistence layer.

APPLICATION

We then have a prometheus/grafana monitoring box at another €6.49/m.

Then we have the services which run just like everyone else on various pieces of hardware, in docker containers for most, but some run standalone on their own hosts. Sharkey €24.49, Lemmy €12.49/m, Synapse €12.49/m, everything else smaller (pyfedi, pixelfed, friendica, photon frontend, various different static frontends, Ada’s latest project of the week) runs on a single dedicated docker host costing €38.70/m.

That brings us to another €101.15/m for the application layer.

EDGE

Then under that we now have the edge nodes, which are completely standalone and do not have internal VPCs etc, it’s TLS in, TLS out for these machines.

Each node is generally around 2× vCPU 1GB RAM 25GB SSD 2TB bandwidth for around €6/m. We have 4, so that’s around €24/m all up.

End user flow

So when you vist the site, you will first typically hit our DNS server. Our DNS server uses the requesting IP, or EDNS client subnet provided to work out which healthy node is closest to your region, and gives you back that IP address.

Side note: It’s important to realise that up until this point, what domain you requested is known to yourself and the DNS provider you used. If you care about privacy, you should install a pihole (you can install it in a docker container, you don’t need a raspberry pi), and set it’s upstream DNS to Quad9 with ECS and DNSSEC enabled (or if you’re really adventurous, install your own unbound server and bypass intermediaries completely).

We run a dual-stack IPv4/IPv6 network all the way through so if you’re on IPv6, you’ll get our v6 IPs, and hopefully enjoy a less NATted, wider MTU’d, packet un-fragmented journey through the internet.

Once you have the IP address from the DNS server, you will connect to the caching caddy server on the closest healthy node to your geographical location and it will terminate your TLS session, decrypting your request.

At this point we’ll see if we have the asset to the request you made cached locally, if so we can send it straight back to you, super quickly!

If not then it will connect to the upstream server in our core location over a (presumably) much larger, less latent and more resilient trunk pipe than most consumer-grade bandwidth will provide. (Unless you run your own redundant-path dark fibre into your house, which I’m not discounting entirely… I know people.)

The returned response will then be evaluated for cacheability and sent back to you.

The build

We wanted to make sure that if one of these endpoints degrade / get attacked / shut down / die, that we can spin up a new one really quick. So the deployment and configuration is completely managed by an Ansible configuration. The deployment of a single node or even a complete replacement of all nodes takes about 10 minutes.

Our nodes run 2 pieces of third party software, and a few scripts to manage things.

DNS

For the DNS resolution we run gdnsd with 2 plugins, http_status and geoip.

The http_status plugin monitors the health of the other nodes to make sure it’s not sending people to nodes that don’t respond.

The geoip plugin uses the requesting IP to determine what region/country you’re from, and select a priority list of nodes closes to that region. The first healthy node in that list is the node that’s selected.

CACHING REVERSE-PROXY

For the web-serving component, we run a custom xcaddy compiled caddy server with a few modules included: cache-handler, otter storage, coraza WAF, ratelimit, layer4, maxmind and crowdsec.

At the moment only the first 3 are in use, but the other 4 are included in case we need to mitigate attacks or other edge cases in the future.

And that’s pretty much it!

If anyone wants any help with setting up their own version of this, or needs more details, let me know. I’d be happy to help.

If a lot of people are interested (which I doubt at this stage, but who knows?) I’d even be willing to create a project or make it dockerisable etc, but I suspect that it’s something that most people would just use Cloudflare et. al. for, if the privacy aspect wasn’t such a concern.

0

[Gelöst] Fehler auf old.feddit.org seit ein paar Tagen

preview

Seit ein paar Tagen erhalte ich diese Fehlermeldung, wenn ich die mlmym-Oberfläche von feddit.org aufrufe.

Startseite von feddit.org samt Fehlermeldung „unable to retrieve site. there doesn’t seem to be anything here“

Als ich den Projektnamen raussuchen wollte, musste ich feststellen, dass die Domain der Projektwebseite (mlmym.org Warnung: NSFW) von irgendeiner chinesischen Seite übernommen & mit Werbung (?) zugekleistert, bzw. das Projekt auf Github zuletzt vor einem Dreivierteljahr aktualisiert wurde.

Ist das ein vorübergehender Fehler, oder ist mylmym einfach nicht mehr mit der aktuellen Lemmy-Version kompatibel?

Edit 2026-01-08: Als ich es heute nochmal ausprobiert hab, war mylmym wieder erreichbar/funktional. Dankeschön!

Seit ein paar Tagen erhalte ich diese Fehlermeldung, wenn ich die mlmym-Oberfläche von feddit.org aufrufe.

Startseite von feddit.org samt Fehlermeldung „unable to retrieve site. there doesn’t seem to be anything here“

Als ich den Projektnamen raussuchen wollte, musste ich feststellen, dass die Domain der Projektwebseite (mlmym.org Warnung: NSFW) von irgendeiner chinesischen Seite übernommen & mit Werbung (?) zugekleistert, bzw. das Projekt auf Github zuletzt vor einem Dreivierteljahr aktualisiert wurde.

Ist das ein vorübergehender Fehler, oder ist mylmym einfach nicht mehr mit der aktuellen Lemmy-Version kompatibel?

Edit 2026-01-08: Als ich es heute nochmal ausprobiert hab, war mylmym wieder erreichbar/funktional. Dankeschön!

0

Changes to the instance networking

preview

I’ve recently found myself without much to do (short version: the company that my company was contracting to went into voluntary administration just before Christmas, while Ada and I were away in Melbourne), so I’ve had a little bit of time on my hands to do some work on the site infrastructure, free from meetings and corporate wankery. YAY!

One of the things I’ve wanted to do for a while now is setup some form of edge-node caching and geo-DNS to get the various sites we host closer to you folks who use our instances.

And yes, there’s Cloudflare… and Akamai… and Bunny.net… however as a safe-haven for vulnerable minorities, and with the geo-political situation the way it is these days, we really need to be super careful about where we terminate your connections. Who are the intermediate people who can see and collect your data. Who can switch our servers off at a moment’s notice, suspend the domain names, shut us down?

Until recently we’ve known that we are slow on the edge, but we controlled all our own hardware, and we’ve not had the capacity to do much about it.

So over the last few days, I’ve taken the time to setup a bunch of edge nodes, migrate DNS away from third party providers, move domain name registrars.

The end result is that (with a few minor site interruptions) now we have our own CDN that we control all the way from DNS resolution until you hit the database on our dedicated servers. Your traffic is encrypted all the way through, our core infrastructure isn’t exposed to people who sniff around to see who they can try to report us and shut us down, nobody else can see your browsing it in transit, and for people not in or around Finland, it’s noticeably faster to load the site and click around.

To make sure you’re all fully informed, I’ll carefully disclose our decisions and new structure.

Firstly our edge servers are on Vultr and DigitalOcean. These 2 providers from our research seem to be quite neutral and non-politically aligned, and neither one by themselves can take us entirely down, and neither one of them are where our core infrastructure is located.

Secondly our edge locations have been carefully chosen to be regions that are outside jurisdictions where we can currently see political turmoil, overly zealous conservatism and fascist activity. We’ve chosen Toronto Canada, Sydney Australia, Amsterdam Netherlands and Frankfurt Germany as our edge node and DNS server locations.

Thirdly we’ve moved our domains into EuroDNS registrar to minimize the chance that the USA pressures companies to take action against our domains. EuroDNS is a large company headquartered in Luxembourg, and with no ties to the US itself, it’s parent company or any sibling companies, this gives us comfort that they can resist any political pressure which may be applied.

If there’s any interest in how we setup the infrastructure, let me know and I can make a separate technical post about it.

EDIT - here it is: lemmyverse.link/lemmy.blahaj.zone/post/36690717

I’ve recently found myself without much to do (short version: the company that my company was contracting to went into voluntary administration just before Christmas, while Ada and I were away in Melbourne), so I’ve had a little bit of time on my hands to do some work on the site infrastructure, free from meetings and corporate wankery. YAY!

One of the things I’ve wanted to do for a while now is setup some form of edge-node caching and geo-DNS to get the various sites we host closer to you folks who use our instances.

And yes, there’s Cloudflare… and Akamai… and Bunny.net… however as a safe-haven for vulnerable minorities, and with the geo-political situation the way it is these days, we really need to be super careful about where we terminate your connections. Who are the intermediate people who can see and collect your data. Who can switch our servers off at a moment’s notice, suspend the domain names, shut us down?

Until recently we’ve known that we are slow on the edge, but we controlled all our own hardware, and we’ve not had the capacity to do much about it.

So over the last few days, I’ve taken the time to setup a bunch of edge nodes, migrate DNS away from third party providers, move domain name registrars.

The end result is that (with a few minor site interruptions) now we have our own CDN that we control all the way from DNS resolution until you hit the database on our dedicated servers. Your traffic is encrypted all the way through, our core infrastructure isn’t exposed to people who sniff around to see who they can try to report us and shut us down, nobody else can see your browsing it in transit, and for people not in or around Finland, it’s noticeably faster to load the site and click around.

To make sure you’re all fully informed, I’ll carefully disclose our decisions and new structure.

Firstly our edge servers are on Vultr and DigitalOcean. These 2 providers from our research seem to be quite neutral and non-politically aligned, and neither one by themselves can take us entirely down, and neither one of them are where our core infrastructure is located.

Secondly our edge locations have been carefully chosen to be regions that are outside jurisdictions where we can currently see political turmoil, overly zealous conservatism and fascist activity. We’ve chosen Toronto Canada, Sydney Australia, Amsterdam Netherlands and Frankfurt Germany as our edge node and DNS server locations.

Thirdly we’ve moved our domains into EuroDNS registrar to minimize the chance that the USA pressures companies to take action against our domains. EuroDNS is a large company headquartered in Luxembourg, and with no ties to the US itself, it’s parent company or any sibling companies, this gives us comfort that they can resist any political pressure which may be applied.

If there’s any interest in how we setup the infrastructure, let me know and I can make a separate technical post about it.

EDIT - here it is: lemmyverse.link/lemmy.blahaj.zone/post/36690717

0

Got error with Blahaj linker when trying to make piefed account.

preview

I meant to make a piefed account a while back and never got around to it. Tried to do so today and when I clicked the link to get my code I got an error instead.

Authentication Failed

No authentication token found. Please make sure you’re accessing this page through the proper authentication flow.

I even tried reloading the page after disabling all my plugins and still got the error (although the styling looked a lot better after disabling NoScript, even though I have blahaj marked as allowed anyways.)

I meant to make a piefed account a while back and never got around to it. Tried to do so today and when I clicked the link to get my code I got an error instead.

Authentication Failed

No authentication token found. Please make sure you’re accessing this page through the proper authentication flow.

I even tried reloading the page after disabling all my plugins and still got the error (although the styling looked a lot better after disabling NoScript, even though I have blahaj marked as allowed anyways.)

0

[GELÖST] Thumbnails für Posts von feddit.org werden nicht angezeigt

preview

Bin mir nicht sicher ob es schon einen Thread dazu gab oder ob ich der erste bin dem es auffällt, aber für Image-Posts die von feddit.org eingereicht werden gibt es in der Web-Ansicht aktuell keine Thumbnails mehr. Posts, die von anderen Instanzen auf feddit.org veröffentlicht wurden, haben allerdings welche.

Besucht man eine feddit.org-Community von einer anderen Instanz aus, werden alle angezeigt und in der App funktioniert es auch.

Edit: Man sieht es auch bei diesem Post, eigentlich ist hier zusätzlich ein Bild verlinkt.

Bin mir nicht sicher ob es schon einen Thread dazu gab oder ob ich der erste bin dem es auffällt, aber für Image-Posts die von feddit.org eingereicht werden gibt es in der Web-Ansicht aktuell keine Thumbnails mehr. Posts, die von anderen Instanzen auf feddit.org veröffentlicht wurden, haben allerdings welche.

Besucht man eine feddit.org-Community von einer anderen Instanz aus, werden alle angezeigt und in der App funktioniert es auch.

Edit: Man sieht es auch bei diesem Post, eigentlich ist hier zusätzlich ein Bild verlinkt.

0

Einen guten Rutsch und ein frohes neues Jahr.

preview

Einen guten Rutsch und ein frohes neues Jahr wünscht das Admin Team von feddit.org. Danke an alle User, für das tolle Jahr mit euch. Möge das nächste auch soviel Spaß machen.

Einen guten Rutsch und ein frohes neues Jahr wünscht das Admin Team von feddit.org. Danke an alle User, für das tolle Jahr mit euch. Möge das nächste auch soviel Spaß machen.

0

Does this instance allow Gore / Snuff?

preview

I was double checking the instance rules after seeing !indians_getting_hit_by_trains@sh.itjust.works. The instance rules mention no pornography but do not mention anything about Gore / snuff. Just wanted to confirm the rules since I’m not very comfortable housing my main account on an instance that allows this type of content.

I was double checking the instance rules after seeing !indians_getting_hit_by_trains@sh.itjust.works. The instance rules mention no pornography but do not mention anything about Gore / snuff. Just wanted to confirm the rules since I’m not very comfortable housing my main account on an instance that allows this type of content.

0

Current funding goals

preview

Howdy!

I am curious if the funding goals here are being fully met? 

With rising cost of… well everything is going up (particularly server hardware and power). Wanted to make sure @TheDude@sh.itjust.works was in the black.

I did do some quick math between both platforms but not sure of that projected 2025 budget is holding up.

Thanks!

Howdy!

I am curious if the funding goals here are being fully met? 

With rising cost of… well everything is going up (particularly server hardware and power). Wanted to make sure @TheDude@sh.itjust.works was in the black.

I did do some quick math between both platforms but not sure of that projected 2025 budget is holding up.

Thanks!

0

Beteiligung an unserer Instanz

preview

Hallo liebe Feddit User,
wie ihr vielleicht wisst, lebt diese Instanz auch davon, dass sich Menschen einbringen. Viele Communities suchen noch Co-Moderatoren. Wenn ihr Lust habt euch zu beteiligen, dann schaut mal hier vorbei.

Schon mal ein großes Dank an alle, die sich hier ehrenamtlich beteiligen und die, die es noch vor haben.

Euer Admin Team

Hallo liebe Feddit User,
wie ihr vielleicht wisst, lebt diese Instanz auch davon, dass sich Menschen einbringen. Viele Communities suchen noch Co-Moderatoren. Wenn ihr Lust habt euch zu beteiligen, dann schaut mal hier vorbei.

Schon mal ein großes Dank an alle, die sich hier ehrenamtlich beteiligen und die, die es noch vor haben.

Euer Admin Team

0

Vorschlag: Sollen wir uns von .ml deföderieren?

preview

[Es ist keine repräsentative Umfrage. Nach Absprache mit andere Admins könnte das Thema später wieder aufgegriffen werden. Kommentare/Diskussion sind aber weiterhin willkommen.]

Ich starte diese Umfrage aus eigener Willen. Sollen wir uns von .mi deföderieren? (Es werden nur feddit.org Konten gezählt, die mindestens ne Woche alt sind).

Die Ergebnisse werden an den restlichen Admins vorgetragen.

Grund: Zu lang stressen .ml Nutzende rum mit menschenverachtenden Weltansichten und werden weitestgehend von ihren eigenen Admins geschützt, da diese oft selber menschenverachtenden Ansichten pflegen oder menschenverachtenden Regime gut finden. Teils nehmen die auf .ml und von .ml Nutzenden auf andere Instanzen geäußerte Sachen faschistische Ausmaße an.

Darum sage ich: Wir müssen nicht mit sowas föderiert sein. Wenn wir von lemmygrad deföderiert sind, können wir von lemmy.ml deföderiert sein.

Edit: Mir ist bewusst, dass manche dort registriert sind und nur außerhalb unterwegs sind. Darum würde ich auch dafür sorgen, dass eine Deföderierung fair ausgestaltet wird sodass Leute evtl. genug Zeit haben sich darauf einzustellen z.B. Konto auf einer unserer föderierten Instanzen zu erstellen. Da kann man ggfs. eine Frist von einen Monat mit angepinnter Ankündigung machen.

[Es ist keine repräsentative Umfrage. Nach Absprache mit andere Admins könnte das Thema später wieder aufgegriffen werden. Kommentare/Diskussion sind aber weiterhin willkommen.]

Ich starte diese Umfrage aus eigener Willen. Sollen wir uns von .mi deföderieren? (Es werden nur feddit.org Konten gezählt, die mindestens ne Woche alt sind).

Die Ergebnisse werden an den restlichen Admins vorgetragen.

Grund: Zu lang stressen .ml Nutzende rum mit menschenverachtenden Weltansichten und werden weitestgehend von ihren eigenen Admins geschützt, da diese oft selber menschenverachtenden Ansichten pflegen oder menschenverachtenden Regime gut finden. Teils nehmen die auf .ml und von .ml Nutzenden auf andere Instanzen geäußerte Sachen faschistische Ausmaße an.

Darum sage ich: Wir müssen nicht mit sowas föderiert sein. Wenn wir von lemmygrad deföderiert sind, können wir von lemmy.ml deföderiert sein.

Edit: Mir ist bewusst, dass manche dort registriert sind und nur außerhalb unterwegs sind. Darum würde ich auch dafür sorgen, dass eine Deföderierung fair ausgestaltet wird sodass Leute evtl. genug Zeit haben sich darauf einzustellen z.B. Konto auf einer unserer föderierten Instanzen zu erstellen. Da kann man ggfs. eine Frist von einen Monat mit angepinnter Ankündigung machen.

0

Frage | Inwieweit sind Lemmy Communities für andere Fediverse Plattformen zur Nutzung als Gruppen geeignet?

preview

geteilt von: fedinaut.de/…/1039fea0-2069-4ab6-196f-4ea66083298…

Frage | Inwieweit sind Lemmy Communities für andere Fediverse Plattformen zur Nutzung als Gruppen geeignet?

Eigentlich habe ich schon einige Zeit lang propagiert das man im Fediverse außerhalb von Lemmy für Gruppen die Lemmy Communities nutzen soll. Zum einen weil das Lemmy besser ins Fediverse einbindet, zum anderen da erst das den Austausch zwischen Nutzern des von Lemmy und Nutzern anderer Plattformen im Fediverse möglich macht.

Nun jedoch lässt mich eine Sache an dieser Strategie zweifeln. Ich habe einen Beitrag eingestellt und darin auch die Feddit Community DACH - Deutschsprachige Community für Deutschland, Österreich, Schweiz erwähnt, damit mein Beitrag auch dorthin federiert wird. Das wurde er auch und ich bekam einiges von Likes von dort, aber im Gegensatz zu sonst keine Kommentare. Also habe ich direkt in der Community nachgeschaut und sah das dort mein Beitrag gelöscht worden war. Mit ein wenig Nachforschen bekam ich mit, das es dort bereits einen anderen Beitrag zum gleichen DW Video gab und man meinen Beitrag deshalb als Duplikat eingestuft und ohne jedes Feedback gelöscht hatte.

Der Unterschied zwischen den beiden Beiträgen bestand darin das der noch bestehende Beitrag aus einer URL und einem automatisch erzeugten Titel, sowie den via DW-Webseite gezogenen Kurzinformationen besteht. Mein Beitrag bestand aus dem kompletten Anrisstext auf der Webseite, entsprechender Formatierung, einen Link zur Webseite mit dem Video, einem Link direkt zur MP4 Version des Videos und einen Link zu weiteren Formaten des Videos. Dazu das Video selbst in eingebetteter Form und dann noch die entsprechenden Hashtags. Also doch zwei recht unterschiedlichen Varianten.

Aber mir geht es dabei gar nicht mal so sehr um diesen speziellen Beitrag. Mir geht es darum das wenn willkürlich und ohne jedes Feedback Inhalte gelöscht werden, Lemmy nicht kompatibel zum Rest des Fediverse ist. Das Lemmy Communitys nicht geeignet sind um darüber von anderen Fediverse Instanzen Inhalte zu teilen, da man sich nie sicher sein kann ob diese auf der betreffenden Lemmy Instanz nicht einfach sang und klanglos gelöscht werden.

Was ist Eure Meinung dazu?

Der Beitrag kann gerne weitergesagt werden, um eine größere Meinungsvielfalt zu erreichen.

#Frage #Fediverse #Lemmy #Communities #Community #Gruppe #Gruppen #Federation #2025-12-23 @dach

geteilt von: fedinaut.de/…/1039fea0-2069-4ab6-196f-4ea66083298…

Frage | Inwieweit sind Lemmy Communities für andere Fediverse Plattformen zur Nutzung als Gruppen geeignet?

Eigentlich habe ich schon einige Zeit lang propagiert das man im Fediverse außerhalb von Lemmy für Gruppen die Lemmy Communities nutzen soll. Zum einen weil das Lemmy besser ins Fediverse einbindet, zum anderen da erst das den Austausch zwischen Nutzern des von Lemmy und Nutzern anderer Plattformen im Fediverse möglich macht.

Nun jedoch lässt mich eine Sache an dieser Strategie zweifeln. Ich habe einen Beitrag eingestellt und darin auch die Feddit Community DACH - Deutschsprachige Community für Deutschland, Österreich, Schweiz erwähnt, damit mein Beitrag auch dorthin federiert wird. Das wurde er auch und ich bekam einiges von Likes von dort, aber im Gegensatz zu sonst keine Kommentare. Also habe ich direkt in der Community nachgeschaut und sah das dort mein Beitrag gelöscht worden war. Mit ein wenig Nachforschen bekam ich mit, das es dort bereits einen anderen Beitrag zum gleichen DW Video gab und man meinen Beitrag deshalb als Duplikat eingestuft und ohne jedes Feedback gelöscht hatte.

Der Unterschied zwischen den beiden Beiträgen bestand darin das der noch bestehende Beitrag aus einer URL und einem automatisch erzeugten Titel, sowie den via DW-Webseite gezogenen Kurzinformationen besteht. Mein Beitrag bestand aus dem kompletten Anrisstext auf der Webseite, entsprechender Formatierung, einen Link zur Webseite mit dem Video, einem Link direkt zur MP4 Version des Videos und einen Link zu weiteren Formaten des Videos. Dazu das Video selbst in eingebetteter Form und dann noch die entsprechenden Hashtags. Also doch zwei recht unterschiedlichen Varianten.

Aber mir geht es dabei gar nicht mal so sehr um diesen speziellen Beitrag. Mir geht es darum das wenn willkürlich und ohne jedes Feedback Inhalte gelöscht werden, Lemmy nicht kompatibel zum Rest des Fediverse ist. Das Lemmy Communitys nicht geeignet sind um darüber von anderen Fediverse Instanzen Inhalte zu teilen, da man sich nie sicher sein kann ob diese auf der betreffenden Lemmy Instanz nicht einfach sang und klanglos gelöscht werden.

Was ist Eure Meinung dazu?

Der Beitrag kann gerne weitergesagt werden, um eine größere Meinungsvielfalt zu erreichen.

#Frage #Fediverse #Lemmy #Communities #Community #Gruppe #Gruppen #Federation #2025-12-23 @dach

0

2025 Fedecan Instance Census is now open

preview

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6


The census will close on January 15th, 2026.

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey. You do not need to be located in Canada, and you do not need to have an account on one of our platforms. If you do have an account on lemmy.ca, sh.itjust.works, piefed.ca, and/or pixelfed.ca, you can indicate that on the census in order to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank. Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on:

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year :)

Link: survey.fedecan.ca//s/cmjcnqzgd0002th01dh6naqm6


The census will close on January 15th, 2026.

A lot has changed since our last census in 2023! We would like to take another opportunity to learn about our growing community.

Everyone is welcome to fill out this survey. You do not need to be located in Canada, and you do not need to have an account on one of our platforms. If you do have an account on lemmy.ca, sh.itjust.works, piefed.ca, and/or pixelfed.ca, you can indicate that on the census in order to be included in those separate graphs/visualizations.

No question is mandatory. You may skip any question by either selecting “no answer (skip this question)”, or by leaving the question blank. Some questions will be hidden depending on your selections. For example, the Pixelfed specific questions will be hidden if you don’t select that as one of the platforms you use.

Sections:

  • Section 1: Location
  • Section 2: Demographics
  • Section 3a: Instance Usage (Forum/Threadiverse)
  • Section 3b: Instance Usage (Pixelfed)
  • Section 4: Feedback / Closing questions

When results are ready, we will share them on our website and with posts on:

The questions were created with help from @Dave@lemmy.nz, based on the questions from their census this year :)

0

is there a way to transfer a ban list from one community to another?

preview

i love banning people, especially with tesh’s option to ‘ban from all moderated communities’, but i noticed that when i make a new community the ban list starts empty again. is there a way to import my full ban list from my oldest community?

i love banning people, especially with tesh’s option to ‘ban from all moderated communities’, but i noticed that when i make a new community the ban list starts empty again. is there a way to import my full ban list from my oldest community?

0

I have just joined. Seems nice. Captcha is extremely difficult though

preview

I signed up on computer, using jerboa on my phone to access Lemmy. The app seems nice :)

Unfortunately the captcha is unreasonably difficult. It took me a very long time and I had to refresh it 8-10 times (it only plays the audio one time?). Admittedly it is partially due to me having audio and visual processing issues, but even if my brain functioned perfectly I imagine it would still be difficult?

I signed up on computer, using jerboa on my phone to access Lemmy. The app seems nice :)

Unfortunately the captcha is unreasonably difficult. It took me a very long time and I had to refresh it 8-10 times (it only plays the audio one time?). Admittedly it is partially due to me having audio and visual processing issues, but even if my brain functioned perfectly I imagine it would still be difficult?

0

Not receiving replies from .world

preview

I can comment on .world posts when logged in to sh.itjust.works, but I don’t receive replies or even see there is a reply unless I view the page from the .world instance.

I can comment on .world posts when logged in to sh.itjust.works, but I don’t receive replies or even see there is a reply unless I view the page from the .world instance.

0

Bekomme in Summit 403 für Feddit Bilder

preview

Ich bekomme in Summit jetzt beim Versuch Bilder zu sehen die auf feddit.org gehostet werden einen 403.

Client error. Code: 403. Message:  url: https://feddit.org/pictrs/image/9e7c9612-f6e2-4922-bde8-7b69895bc1a7.jpeg.

Wenn ich diese URL in Firefox Mobile aufrufe dann kann ich das Bild sehen.

Mal gucken was passiert, wenn ich das Bild hier einbinde.

Edit: Kann es in diesem Beitrag hier auch nicht sehen.

Ich bekomme in Summit jetzt beim Versuch Bilder zu sehen die auf feddit.org gehostet werden einen 403.

Client error. Code: 403. Message:  url: https://feddit.org/pictrs/image/9e7c9612-f6e2-4922-bde8-7b69895bc1a7.jpeg.

Wenn ich diese URL in Firefox Mobile aufrufe dann kann ich das Bild sehen.

Mal gucken was passiert, wenn ich das Bild hier einbinde.

Edit: Kann es in diesem Beitrag hier auch nicht sehen.

0

[GELÖST] Ban von u/Azrael

preview

Im DACH post über Udo Kier wurde der user “Azrael” wegen “Spam/Pornografie” gebannt nachdem er auf einen meiner Kommentare geantwortet hat.

Ich bin mir ziemlich sicher das ist nur ein Missverständnis, da eher den Twitter URL Umleiter “girlcockx.com” benutzt hat.

Die URL sieht nur wie Pornografie aus führt aber zu einem relevanten tweet zum Thema.

Im DACH post über Udo Kier wurde der user “Azrael” wegen “Spam/Pornografie” gebannt nachdem er auf einen meiner Kommentare geantwortet hat.

Ich bin mir ziemlich sicher das ist nur ein Missverständnis, da eher den Twitter URL Umleiter “girlcockx.com” benutzt hat.

Die URL sieht nur wie Pornografie aus führt aber zu einem relevanten tweet zum Thema.

0

Fediverse Foundation: Finanzen, Fundraiser, Danksagung

preview

Hallo feddit.org!

(english version below)

Das Jahr neigt sich langsam dem Ende zu. Zeit für einen kleinen Rückblick und unseren Aufruf für den Jahresabschluss-Fundraiser.


Was ist 2025 passiert?

📸 Pixelfed launch: instapix.org

🔏 CryptPad zur Verfügung gestellt: docs.fediverse.foundation

💶 PayPal Konto wurde geschlossen

👪 @baum@norden.social verstärkt das Infrastruktur-Team!

🗨 Diverse Upgrades, Wartungen und anderes Tech bla bla

📚 Mehr im Blog: fediverse.foundation/blog/


💰 Wie steht es um die Finanzen? Mit Ende Oktober fehlen noch ca. 1500€ um am Jahresende in den schwarzen Zahlen zu bleiben. Das sollte sich knapp ausgehen. Wer beim Fundraiser mitmacht, hilft uns, dass es nicht so knapp wird, und wir einen kleinen Polster aufbauen können.

🙏 Fundraiser Ab sofort könnt ihr bei Spenden (fediverse.foundation/spenden/) in den Verwendungszweck schreiben, wieso ihr es wichtig findet, die Fediverse Foundation und das Fediverse zu unterstützen. Wir werden die gesammelten Nachrichten gegen Jahresende anonymisiert auf unserem Blog veröffentlichen.

💌 Danke an alle, die mitmachen, die unsere Instanzen nutzen und mit Leben füllen und überhaupt an alle, die das Fediverse zu dem machen, was es ist. Ihr seid die besten, ohne Euch wäre das hier alles nichts.

Eure

Fediverse Foundation


Hello feddit.org!

The year is slowly drawing to a close. Time for a brief review and our call for the year-end fundraiser.

2025 - what went down?

📸 Pixelfed launched: instapix.org

🔏 CryptPad started: docs.fediverse.foundation

💶 Closed our PayPal account

👪 @baum@norden.social bolstering the infrastructure team!

🗨 Various upgrades, maintenance, and other tech mubo-jumbo

📚 An much more, check out: fediverse.foundation/blog/


💰 How are the finances looking? As of the end of October, we still need about €1500 to stay in the black by the end of the year. That should just about work out. Anyone who participates in the fundraiser helps us ensure it’s not so tight and that we can build a small buffer.

🙏 Fundraiser From now on, when you donate (fediverse.foundation/spenden/), you can write in the purpose of payment why you think it’s important to support the Fediverse Foundation and the Fediverse. We will publish the collected messages anonymously on our blog towards the end of the year.

💌 Thanks to everyone who participates, who uses and fills our instances with life, and indeed to everyone who makes the Fediverse what it is. You’re the best, without you all of this would mean nothing.

All the best

Fediverse Foundation


#feddit #fedditorg #FediverseFoundation #JahresRückblick #fundraiser #instapix #pixelfed #cryptpad #spenden #JahresAbschluss #FediverseUnterstützen

Hallo feddit.org!

(english version below)

Das Jahr neigt sich langsam dem Ende zu. Zeit für einen kleinen Rückblick und unseren Aufruf für den Jahresabschluss-Fundraiser.


Was ist 2025 passiert?

📸 Pixelfed launch: instapix.org

🔏 CryptPad zur Verfügung gestellt: docs.fediverse.foundation

💶 PayPal Konto wurde geschlossen

👪 @baum@norden.social verstärkt das Infrastruktur-Team!

🗨 Diverse Upgrades, Wartungen und anderes Tech bla bla

📚 Mehr im Blog: fediverse.foundation/blog/


💰 Wie steht es um die Finanzen? Mit Ende Oktober fehlen noch ca. 1500€ um am Jahresende in den schwarzen Zahlen zu bleiben. Das sollte sich knapp ausgehen. Wer beim Fundraiser mitmacht, hilft uns, dass es nicht so knapp wird, und wir einen kleinen Polster aufbauen können.

🙏 Fundraiser Ab sofort könnt ihr bei Spenden (fediverse.foundation/spenden/) in den Verwendungszweck schreiben, wieso ihr es wichtig findet, die Fediverse Foundation und das Fediverse zu unterstützen. Wir werden die gesammelten Nachrichten gegen Jahresende anonymisiert auf unserem Blog veröffentlichen.

💌 Danke an alle, die mitmachen, die unsere Instanzen nutzen und mit Leben füllen und überhaupt an alle, die das Fediverse zu dem machen, was es ist. Ihr seid die besten, ohne Euch wäre das hier alles nichts.

Eure

Fediverse Foundation


Hello feddit.org!

The year is slowly drawing to a close. Time for a brief review and our call for the year-end fundraiser.

2025 - what went down?

📸 Pixelfed launched: instapix.org

🔏 CryptPad started: docs.fediverse.foundation

💶 Closed our PayPal account

👪 @baum@norden.social bolstering the infrastructure team!

🗨 Various upgrades, maintenance, and other tech mubo-jumbo

📚 An much more, check out: fediverse.foundation/blog/


💰 How are the finances looking? As of the end of October, we still need about €1500 to stay in the black by the end of the year. That should just about work out. Anyone who participates in the fundraiser helps us ensure it’s not so tight and that we can build a small buffer.

🙏 Fundraiser From now on, when you donate (fediverse.foundation/spenden/), you can write in the purpose of payment why you think it’s important to support the Fediverse Foundation and the Fediverse. We will publish the collected messages anonymously on our blog towards the end of the year.

💌 Thanks to everyone who participates, who uses and fills our instances with life, and indeed to everyone who makes the Fediverse what it is. You’re the best, without you all of this would mean nothing.

All the best

Fediverse Foundation


#feddit #fedditorg #FediverseFoundation #JahresRückblick #fundraiser #instapix #pixelfed #cryptpad #spenden #JahresAbschluss #FediverseUnterstützen

0

Wartung am Samstag 22.11. 14:00-16:00 CET | Maintenance on saturday 22.11. 14:00-16:00 CET

preview

English below.

Wir planen diesen Samstag 22.11. zwischen 14:00 und 16:00 CET ein Update eines Routers. Das Update erfordert einen Reboot, wodurch feddit.org in der Zeit für ca. 5 Minuten nicht erreichbar sein wird.

Dank der persistenten Föderationswarteschlange von Lemmy gehen uns keine Aktivitäten von anderen Lemmy-Instanzen verloren. Es kann jedoch einige Minuten länger dauern, bis wir wieder mit allen Instanzen synchronisiert sind. Bei anderer Fediverse-Software könnten möglicherweise Posts, Kommentare oder Votes verloren gehen, wenn diese nicht mit der Downtime auf der Empfängerseite umgehen können.


We are planning to update a router this Saturday, November 22, between 2:00 p.m. and 4:00 p.m. CET. The update requires a reboot, which means that feddit.org will be unavailable for approximately 5 minutes during this time.

Thanks to Lemmy’s persistent federation queue, we will not lose any activity from other Lemmy instances. However, it may take a few minutes longer until we are synchronized with all instances again. Other Fediverse software may lose posts, comments or votes if they cannot handle the downtime on the receiving end.

English below.

Wir planen diesen Samstag 22.11. zwischen 14:00 und 16:00 CET ein Update eines Routers. Das Update erfordert einen Reboot, wodurch feddit.org in der Zeit für ca. 5 Minuten nicht erreichbar sein wird.

Dank der persistenten Föderationswarteschlange von Lemmy gehen uns keine Aktivitäten von anderen Lemmy-Instanzen verloren. Es kann jedoch einige Minuten länger dauern, bis wir wieder mit allen Instanzen synchronisiert sind. Bei anderer Fediverse-Software könnten möglicherweise Posts, Kommentare oder Votes verloren gehen, wenn diese nicht mit der Downtime auf der Empfängerseite umgehen können.


We are planning to update a router this Saturday, November 22, between 2:00 p.m. and 4:00 p.m. CET. The update requires a reboot, which means that feddit.org will be unavailable for approximately 5 minutes during this time.

Thanks to Lemmy’s persistent federation queue, we will not lose any activity from other Lemmy instances. However, it may take a few minutes longer until we are synchronized with all instances again. Other Fediverse software may lose posts, comments or votes if they cannot handle the downtime on the receiving end.

0

Infinite scroll still not working on 0.19.13

preview

Infinite scrolling not working was reported here (sh.itjust.works/post/48482678) and a few other places. It seemed like upgrading to 0.19.13 would be a potential fix for the issue.

Well, the footer says we’re on 0.19.13 and infinite scrolling still isn’t working for the Active or Hot filters when browsing All.

What’s the next step?

Infinite scrolling not working was reported here (sh.itjust.works/post/48482678) and a few other places. It seemed like upgrading to 0.19.13 would be a potential fix for the issue.

Well, the footer says we’re on 0.19.13 and infinite scrolling still isn’t working for the Active or Hot filters when browsing All.

What’s the next step?