0

The Ground We Build On (CYOA)

preview

I hear feet shuffling and the voices get louder as I walk into the hall. Everyone finding their clique. Which group will let me get close enough?

His smile fades as I look toward his group, his eyes narrowing before he turns away. She pulls her mana crystal close to her chest as I walk by, her lips pressed together like she’s smelled something rotten. The group dressed like stoners is probably my best bet. Baggy clothes, greasy hair, and one kid with a faded Pink Floyd shirt who just looks away.

“Leech.”

I hear it from the group of jocks, followed by a few laughs. The one who said it is leaning against the wall in a blue and gray varsity jacket, grinning as he elbows his friend. It’s said under his breath, but I heard him. I always hear him. He’s humiliated me for years, and today is no different. But I keep my head high.

I join the stoners near the old corridor. The drain is wet, like someone recently mopped the floor. But the rest of the floor is dry. Nobody wants to stand closest to it. They’ll let me stay as long as I’m between them and the drain.

The corridor is a straight shot to the workshop, but today nobody is using it. Any change, even small ones spooks us. Nobody says anything.

The crowd starts walking.

  1. Stay with the group until the workshop.

  2. I’ve had enough of him. I’m taking the longer maintenance passage.

  3. It’s just a little water, and I might actually get a decent seat for once if I take the corridor.

Or start over.

I hear feet shuffling and the voices get louder as I walk into the hall. Everyone finding their clique. Which group will let me get close enough?

His smile fades as I look toward his group, his eyes narrowing before he turns away. She pulls her mana crystal close to her chest as I walk by, her lips pressed together like she’s smelled something rotten. The group dressed like stoners is probably my best bet. Baggy clothes, greasy hair, and one kid with a faded Pink Floyd shirt who just looks away.

“Leech.”

I hear it from the group of jocks, followed by a few laughs. The one who said it is leaning against the wall in a blue and gray varsity jacket, grinning as he elbows his friend. It’s said under his breath, but I heard him. I always hear him. He’s humiliated me for years, and today is no different. But I keep my head high.

I join the stoners near the old corridor. The drain is wet, like someone recently mopped the floor. But the rest of the floor is dry. Nobody wants to stand closest to it. They’ll let me stay as long as I’m between them and the drain.

The corridor is a straight shot to the workshop, but today nobody is using it. Any change, even small ones spooks us. Nobody says anything.

The crowd starts walking.

  1. Stay with the group until the workshop.

  2. I’ve had enough of him. I’m taking the longer maintenance passage.

  3. It’s just a little water, and I might actually get a decent seat for once if I take the corridor.

Or start over.

150

Surveillance company Flock cuts staff as privacy backlash grows

TechCrunch Surveillance company Flock cuts staff as privacy backlash grows | TechCrunch techcrunch.com
preview

Surveillance camera maker Flock is cutting its workforce as the company faces ongoing and growing backlash to its license plate readers and people-tracking technology.

News of the staff cuts comes from Reuters, which reported that Flock is reducing its staff by 18%, or around 270 employees, across the board. The publication said the employees are leaving at the end of October following a voluntary buyout program.

Wired reported last month that Flock was asking some of its employees to leave, citing the need to shrink its staff to avoid mandatory layoffs.

Flock spokesperson Paris Lewbel told TechCrunch in a statement on Friday: “Flock recently offered current employees a generous Voluntary Separation Program as part of our efforts to position the company for its next phase of growth. This was a voluntary program, not a layoff, and reflects our continued focus on building a strong, sustainable business for the future.”

Surveillance camera maker Flock is cutting its workforce as the company faces ongoing and growing backlash to its license plate readers and people-tracking technology.

News of the staff cuts comes from Reuters, which reported that Flock is reducing its staff by 18%, or around 270 employees, across the board. The publication said the employees are leaving at the end of October following a voluntary buyout program.

Wired reported last month that Flock was asking some of its employees to leave, citing the need to shrink its staff to avoid mandatory layoffs.

Flock spokesperson Paris Lewbel told TechCrunch in a statement on Friday: “Flock recently offered current employees a generous Voluntary Separation Program as part of our efforts to position the company for its next phase of growth. This was a voluntary program, not a layoff, and reflects our continued focus on building a strong, sustainable business for the future.”

12

[Episode] Hello, I am a Witch and my Crush Wants me to Make a Love Potion! • Doumo, Suki na Hito ni Horegusuri wo Irai Sareta Majo desu. - Episode 2 discussion

preview

Doumo, Suki na Hito ni Horegusuri wo Irai Sareta Majo desu., episode 2

banner image

Alternative Names

Hi, I’m a Witch, and My Crush Wants Me to Make a Love Potion, Horemajo, I’m a witch who’s crush requested a love potion, Love Potion, la sorcière mal-aimée, 惚れ魔女


Additional Links

- Info - AniList - Info - Kitsu - Info - MyAnimeList - Info - Official Site (Japanese) - Social - Twitter (Japanese) - Streaming - Crunchyroll


Reminder: Please do not discuss plot points not yet seen or skipped in the show. Failing to follow the rules may result in a ban.


All discussions

Episode Link
1 Link
2 Link
3 Link

This post was created by a bot. Message the mod team for feedback and comments. The original source code can be found on GitHub.

Doumo, Suki na Hito ni Horegusuri wo Irai Sareta Majo desu., episode 2

banner image

Alternative Names

Hi, I’m a Witch, and My Crush Wants Me to Make a Love Potion, Horemajo, I’m a witch who’s crush requested a love potion, Love Potion, la sorcière mal-aimée, 惚れ魔女


Additional Links

- Info - AniList - Info - Kitsu - Info - MyAnimeList - Info - Official Site (Japanese) - Social - Twitter (Japanese) - Streaming - Crunchyroll


Reminder: Please do not discuss plot points not yet seen or skipped in the show. Failing to follow the rules may result in a ban.


All discussions

Episode Link
1 Link
2 Link
3 Link

This post was created by a bot. Message the mod team for feedback and comments. The original source code can be found on GitHub.

0

I wanted to remember exactly when it happened

preview

It began starting in 1970 through to the 1980s.

fred.stlouisfed.org/…/when-comparing-wages-and-wo…

Then in the 1990s is when it flipped.

economicshelp.org/…/the-two-speed-us-economy-2026…

You can clearly see in 1970 things were in the much more balanced productive state, and we are in an upside down economy. This will not last much longer with AI.

It began starting in 1970 through to the 1980s.

fred.stlouisfed.org/…/when-comparing-wages-and-wo…

Then in the 1990s is when it flipped.

economicshelp.org/…/the-two-speed-us-economy-2026…

You can clearly see in 1970 things were in the much more balanced productive state, and we are in an upside down economy. This will not last much longer with AI.

0

Happy Thanksgiving

Thanksgiving (Canada) - Wikipedia en.wikipedia.org
preview

The first Thanksgiving meal in North America was after Martin Frobisher’s safe landing in Newfoundland in 1579. Canadians celebrate Thanksgiving at the end of harvest in gratitude for the harvest.

The first Thanksgiving meal in North America was after Martin Frobisher’s safe landing in Newfoundland in 1579. Canadians celebrate Thanksgiving at the end of harvest in gratitude for the harvest.

0

Language learning musing messing with features from the fediverse

preview

Language learning musing messing with features from the fediverse

Rambling post, but for #languagelearning, something I like is to check social media posts in the given language. But in the #fediverse posts are unknown until federated, and #RSSfeeds are hard to come by since algorithimic platforms seem to prefer to get users stuck, perhaps even addicted, to their own UI and UX, and thus either / both not having means to follow externally, or pushing stuff that’s more likely to engage instead of nicher stuff like learning.

But leveraging mastodon.social’s size to follow its RSS feeds for hashtags, I’m slowly seeing more and more posts in different languages appearing, including for the ones I’m learning. Also these posts often come with more hashtags, some that I may be interested in to, and also likely to be a language-specific hashtag.

Added to a redirect script since my instance’s software’s searches have a hardcoded pattern (domain + /search?search[q]= + what’s to be searched), I can even get these posts locally. Mastodon, Piefed and Lemmy have hardcoded searched patterns too, though I mostly use Mastodon of these latter 3 so can’t comment much on the others.

And some times in this routine (I think that’s the word?), I even find someone or some group I get interested in following. Even Spanish’s starting to become more common to find, and I always had trouble finding places in that language. "<.<

And with bridging and RSS-tracking tools, even posts from external platforms can be brought to my feed.

Also, I’d even imagine that doing so helps setting the place in case others interested in language learning but not as crazy patient join in.

It’s being a fun ride. =D

Language learning musing messing with features from the fediverse

Rambling post, but for #languagelearning, something I like is to check social media posts in the given language. But in the #fediverse posts are unknown until federated, and #RSSfeeds are hard to come by since algorithimic platforms seem to prefer to get users stuck, perhaps even addicted, to their own UI and UX, and thus either / both not having means to follow externally, or pushing stuff that’s more likely to engage instead of nicher stuff like learning.

But leveraging mastodon.social’s size to follow its RSS feeds for hashtags, I’m slowly seeing more and more posts in different languages appearing, including for the ones I’m learning. Also these posts often come with more hashtags, some that I may be interested in to, and also likely to be a language-specific hashtag.

Added to a redirect script since my instance’s software’s searches have a hardcoded pattern (domain + /search?search[q]= + what’s to be searched), I can even get these posts locally. Mastodon, Piefed and Lemmy have hardcoded searched patterns too, though I mostly use Mastodon of these latter 3 so can’t comment much on the others.

And some times in this routine (I think that’s the word?), I even find someone or some group I get interested in following. Even Spanish’s starting to become more common to find, and I always had trouble finding places in that language. "<.<

And with bridging and RSS-tracking tools, even posts from external platforms can be brought to my feed.

Also, I’d even imagine that doing so helps setting the place in case others interested in language learning but not as crazy patient join in.

It’s being a fun ride. =D

0

Book Publishers Are Quietly Using More AI. Staff Are Revolting

WIRED Book Publishers Are Quietly Using More AI. Staff Are Revolting www.wired.com
preview

According to interviews with more than two dozen workers, all of whom spoke under the condition of anonymity to avoid jeopardizing their employment, publishers are now using LLMs like Claude and ChatGPT to email literary agents, write publicity and back-cover copy, design cover art, and generate marketing materials, often at the direction of their executives.

At the same time, multiple editorial staffers say the widely publicized cases of authors accused of using LLMs to help write their books—like Hachette’s horror novel Shy Girl or Macmillan’s crime thriller Call Me, I’ll Hide the Body—are just the tip of the iceberg. “Every single imprint has a story of someone very esteemed who had a book canceled because of blatant AI use” without ever making the news, one editor says.

At HarperCollins senior leaders purchased Claude licenses from Anthropic months ago “but very quickly realized they didn’t know how to implement them,” according to a current employee. Dozens of junior- and senior-level staff were then “voluntold” to become “AI Champions” and were tasked with discovering use cases in monthly brainstorming sessions with staff across the company.

According to interviews with more than two dozen workers, all of whom spoke under the condition of anonymity to avoid jeopardizing their employment, publishers are now using LLMs like Claude and ChatGPT to email literary agents, write publicity and back-cover copy, design cover art, and generate marketing materials, often at the direction of their executives.

At the same time, multiple editorial staffers say the widely publicized cases of authors accused of using LLMs to help write their books—like Hachette’s horror novel Shy Girl or Macmillan’s crime thriller Call Me, I’ll Hide the Body—are just the tip of the iceberg. “Every single imprint has a story of someone very esteemed who had a book canceled because of blatant AI use” without ever making the news, one editor says.

At HarperCollins senior leaders purchased Claude licenses from Anthropic months ago “but very quickly realized they didn’t know how to implement them,” according to a current employee. Dozens of junior- and senior-level staff were then “voluntold” to become “AI Champions” and were tasked with discovering use cases in monthly brainstorming sessions with staff across the company.

0

Le Libé des historien·nes Populations animales : le WWF veut «nourrir l’espoir» sur la biodiversité

preview

Si la taille des populations animales étudiées a baissé de 73 % entre 1970 et 2022, 50 % d’entre elles sont stables ou en hausse, relativise l’ONG, qui publie son rapport «Planète vivante» ce jeudi.

#libération #libé #biodiversité #BonneNouvelle #BonnesNouvelles

Si la taille des populations animales étudiées a baissé de 73 % entre 1970 et 2022, 50 % d’entre elles sont stables ou en hausse, relativise l’ONG, qui publie son rapport «Planète vivante» ce jeudi.

#libération #libé #biodiversité #BonneNouvelle #BonnesNouvelles

0

Pueblo of Jemez purchases Rancho Del Chaparral from Girl Scouts of New Mexico Trails

preview

Crossposted from slrpnk.net/post/43707994

Transcript:

Dear volunteers and troop leaders, I’m writing to share that Girl Scouts of New Mexico Trails has completed the sale of Rancho del Chaparral to the Pueblo of Jemez. We wanted you to hear directly from us before this news is shared more broadly with families and the public.

Rancho holds decades of memories for many in our Girl Scout community. This sale is also significant because of who will steward the land next. We are grateful that the Pueblo of Jemez will shape its future.

In language provided for the announcement, the Pueblo of Jemez shared: “The land will give tribal members the opportunity to rediscover and explore the cultural landscape that is mentioned in the Pueblo’s tribal history.”

The sale creates a one-time opportunity to invest in the council’s long-term sustainability. It will also help put the Every Girl Strategy into action, with better support for the troops and volunteers serving girls today and new ways for girls to participate.

It was announced earlier this year that GSNMT was unable to maintain their Rancho Del Chaparral Scout Camp and was having to sell it. I was very worried some rich asshole would buy it and turn it into some commercial hunting grounds.

I am very happy to hear that it was purchased by the Pueblo of Jemez.

Crossposted from slrpnk.net/post/43707994

Transcript:

Dear volunteers and troop leaders, I’m writing to share that Girl Scouts of New Mexico Trails has completed the sale of Rancho del Chaparral to the Pueblo of Jemez. We wanted you to hear directly from us before this news is shared more broadly with families and the public.

Rancho holds decades of memories for many in our Girl Scout community. This sale is also significant because of who will steward the land next. We are grateful that the Pueblo of Jemez will shape its future.

In language provided for the announcement, the Pueblo of Jemez shared: “The land will give tribal members the opportunity to rediscover and explore the cultural landscape that is mentioned in the Pueblo’s tribal history.”

The sale creates a one-time opportunity to invest in the council’s long-term sustainability. It will also help put the Every Girl Strategy into action, with better support for the troops and volunteers serving girls today and new ways for girls to participate.

It was announced earlier this year that GSNMT was unable to maintain their Rancho Del Chaparral Scout Camp and was having to sell it. I was very worried some rich asshole would buy it and turn it into some commercial hunting grounds.

I am very happy to hear that it was purchased by the Pueblo of Jemez.

0

Building a bike from "scratch" - part 2

preview

cross-posted from: feddit.org/post/36603267

This is part 2, check out part 1 first!

Building

I expected this to be easier (or at least more fun) than the buying process, but sadly it was mostly very annoying. In particular because it turned into another shopping experience, and a worse one for that matter.

The parts

Other than the frame, the groupset seems most relevant here. I opted for a non-electric Shimano 105. Thought about going electric and maybe even Chinese OEM as well here, but it didn’t seem like the right thing for me. Biking is primarily leisure time fun, and I don’t want to mess with another app and think about charging batteries when I’m getting ready to ride. Rather I’ll be turning some screws and fiddle with my shifter for a bit. For the wheels I got TPU tubes from RideNow and Continental Grand Prix 5000S (30 wide). Both with no deeper knowledge, but just based on a good review or two I had seen online.

That’s it for the obvious parts (from my POV). My groupset order did not come with discs (which I could have deduced from the images), so I got some 160mm ones. It did not come with sleeves for shifter cables either. And my frame could only handle 140 discs in the rear by default, so I had to get an adapter (now while writing this I’m wondering: Do bikes usually come with smaller rear disks? Some do, some run an adapter. I just checked… ). All of these things I realized when trying to assemble, which got frustrating really quick. I had to stop every time and start ordering AGAIN. I don’t blame anyone but myself for not checking my orders better, but this made for a very unpleasant building experience. And that was only half of the annoyance…

The tools

You will have heard about the EUs push towards unified cables for electronic hardware producers. They should look into bike parts next if you ask me!

I knew ahead of time, that I would need a tool for the Shimano centerlock and the bottom bracket. I managed to order 3 wrong tools for the bottom bracket and the wrong centerlock tool. Naive me just counted the notches on the bottom bracket and ordered the first bottom bracket tool with “Shimano” somewhere in the description. I’ll spare you the details, but to get the right one I measured across my bottom bracket and then checked the manufacturers site to find infos about the diameters (shops did not really list these). Just like with the parts, this stopped me in my tracks multiple times and was very unpleasant. Also you might want 1 or 2 torque wrenches, some grease, carbon assembly paste, oil and a bleeding kit for the break lines (which also didn’t fit the first time). Some of this I already had, but now I almost feel like a bike shop. Still I’m 100% certain, that the three bottom bracket tools I now own will not be sufficient to service the next bike rolling into my “shop”.

bike tools

The assembly

With the right tools (and parts) at hand, the actual assembly was mostly straight forward. Getting the cables and break lines into the handlebars was a proper pain though. Other than that: Apply the proper torque, mind the directions, grease up a little and listen to your gut. If something sounds, feels or looks wrong, it probably is. Take a step back and think for a minute. A quick internet search will likely help you in finding everything you would want to know.

Even though the mechanical shifting was a concious and deliberate choice, I’m still convinced: Adjusting your gears properly is sorcery. I spent quite some time on it, the bike strapped up in my power rack, youtube videos left an right. Then I did some more adjusting while out on the road and that’s were it finally felt like I achieved something decent. Cheers to the two fellow bikers who stopped while I was fiddling with my bike and asked if everything was all right!

Resume

I did not enjoy this project very much. And this has nothing to do with the ordering or the OEM frame. But the special tooling and all the tiny bits and bobs is what really got me. With many other projects, I feel like you can work around lacking tools or material. But in particular the wrenches and nuts are just so specialized (and I didn’t want to attack my new gear with a pipe wrench), that I just had to get more and more stuff. Also it didn’t help that I’m impatient and apparently bad at reading. When ordering parts and tools, just take some time. This would have saved me at least some of the pain. All the proprietary wrenches and fittings should still be forbidden though.

Now don’t get me wrong: I’m glad I did this and I’m very happy with the result. The frame, the wheels, the paint job - everything there worked out like I imagined and I would order one again. I really love the frame! I’m also happy with all the new knowledge and tools, which will help me maintain my bikes in the future. Like bleeding the breaks or changing the bottom bracket was nothing I had done before, and this just pushed me to do it (it’s not hard btw). But I guess I had this romantic image in my head where the frame arrived and then I just assemble it in one or two days and then get to go on a ride. Which maybe could have happened, if I had spent more time on checking what I needed. Anyhow: frame good, ordering good, bike tooling and bike parts bad.

the bike

The money

This will be split into two parts:

  • Cost of the bike
  • Everything I actually got/had to get

In neither case I went hunting for the best price or product for that matter.

Cost of the bike

Money that went into making this a functional, rideable bike.

  • Light carbon order: ~1.490 €, split up into:
    • Frame, handlebars, seat post, bottom bracket: 840€
    • Carbon wheels: 320€
    • Bottle cages: 26€
    • Shipping and fees: 300€
  • 105 group set: 430€
  • Discs + spacer + pads: 100€
  • Tubes: 8€
  • Tires: 92€
  • Handlebar tape: 8€
  • Pre waxed Chain: 36€
  • Outer shifting cable: 10€

Makes ~2200€ in total. I had a saddle and pedals at hand, so consider this, but these would not come with a store bought bike either…

Cost of building the bike

This will be everything I had to get, to go from “doing some maintenance on a gravel bike” to “assembling a bike”.

  • Chain pliers: 10€
  • Chain wrench: 32€
  • Bleed kit & oil: 32€
  • Centerlock tool: 20€
  • 3* bottom bracket tool: ~100€
  • Carbon paste: 10€

So at least 200€ more, while all of these could have been borrowed. The torque wrench I had gotten (a little ahead of time) would almost double that, since I’m seemingly unable to go cheap. The second torque wrench is a friends. This really is individual and mostly relevant to myself.

Was it worth it?

This is hard to judge, since this bike does not exist on the market. So I started thinking about it this way:

  • Would I have gotten a road bike, if not building it? Yes. Maybe not this year, but within the next 1-3 years for sure.
  • Would I have least a bike? No. I believe in owning stuff, and my job doesn’t offer it anyway.
  • How much would I have spent on a bike? I’m in love with the Canyon Aeroad ever since I saw it, which ain’t cheap.

I don’t think I would have dropped 4-8k on an Aeroad, even used they are a little too pricey for me atm. Also, even when not considering differences in frame and wheels (that I can’t judge), I have cheaper components than any version of the Aeroad. That said, I have a hard time finding a carbon frame (and wheels) for around 2k new. So I like to imagine that I did indeed save some money (not billing my time ofc). A highly subjective verdict obviously.

If you are looking for guidance and the above is not enough: I would not recommend doing this for your first bike. Rather get a “complete” bike, go out riding, enjoy summer, learn something about bikes first. If you already have a bike, some tools, friends with tools, an open bike shop close by, this might be something for you. You can learn a lot, and I feel a lot more confident in maintaining bikes now.

cross-posted from: feddit.org/post/36603267

This is part 2, check out part 1 first!

Building

I expected this to be easier (or at least more fun) than the buying process, but sadly it was mostly very annoying. In particular because it turned into another shopping experience, and a worse one for that matter.

The parts

Other than the frame, the groupset seems most relevant here. I opted for a non-electric Shimano 105. Thought about going electric and maybe even Chinese OEM as well here, but it didn’t seem like the right thing for me. Biking is primarily leisure time fun, and I don’t want to mess with another app and think about charging batteries when I’m getting ready to ride. Rather I’ll be turning some screws and fiddle with my shifter for a bit. For the wheels I got TPU tubes from RideNow and Continental Grand Prix 5000S (30 wide). Both with no deeper knowledge, but just based on a good review or two I had seen online.

That’s it for the obvious parts (from my POV). My groupset order did not come with discs (which I could have deduced from the images), so I got some 160mm ones. It did not come with sleeves for shifter cables either. And my frame could only handle 140 discs in the rear by default, so I had to get an adapter (now while writing this I’m wondering: Do bikes usually come with smaller rear disks? Some do, some run an adapter. I just checked… ). All of these things I realized when trying to assemble, which got frustrating really quick. I had to stop every time and start ordering AGAIN. I don’t blame anyone but myself for not checking my orders better, but this made for a very unpleasant building experience. And that was only half of the annoyance…

The tools

You will have heard about the EUs push towards unified cables for electronic hardware producers. They should look into bike parts next if you ask me!

I knew ahead of time, that I would need a tool for the Shimano centerlock and the bottom bracket. I managed to order 3 wrong tools for the bottom bracket and the wrong centerlock tool. Naive me just counted the notches on the bottom bracket and ordered the first bottom bracket tool with “Shimano” somewhere in the description. I’ll spare you the details, but to get the right one I measured across my bottom bracket and then checked the manufacturers site to find infos about the diameters (shops did not really list these). Just like with the parts, this stopped me in my tracks multiple times and was very unpleasant. Also you might want 1 or 2 torque wrenches, some grease, carbon assembly paste, oil and a bleeding kit for the break lines (which also didn’t fit the first time). Some of this I already had, but now I almost feel like a bike shop. Still I’m 100% certain, that the three bottom bracket tools I now own will not be sufficient to service the next bike rolling into my “shop”.

bike tools

The assembly

With the right tools (and parts) at hand, the actual assembly was mostly straight forward. Getting the cables and break lines into the handlebars was a proper pain though. Other than that: Apply the proper torque, mind the directions, grease up a little and listen to your gut. If something sounds, feels or looks wrong, it probably is. Take a step back and think for a minute. A quick internet search will likely help you in finding everything you would want to know.

Even though the mechanical shifting was a concious and deliberate choice, I’m still convinced: Adjusting your gears properly is sorcery. I spent quite some time on it, the bike strapped up in my power rack, youtube videos left an right. Then I did some more adjusting while out on the road and that’s were it finally felt like I achieved something decent. Cheers to the two fellow bikers who stopped while I was fiddling with my bike and asked if everything was all right!

Resume

I did not enjoy this project very much. And this has nothing to do with the ordering or the OEM frame. But the special tooling and all the tiny bits and bobs is what really got me. With many other projects, I feel like you can work around lacking tools or material. But in particular the wrenches and nuts are just so specialized (and I didn’t want to attack my new gear with a pipe wrench), that I just had to get more and more stuff. Also it didn’t help that I’m impatient and apparently bad at reading. When ordering parts and tools, just take some time. This would have saved me at least some of the pain. All the proprietary wrenches and fittings should still be forbidden though.

Now don’t get me wrong: I’m glad I did this and I’m very happy with the result. The frame, the wheels, the paint job - everything there worked out like I imagined and I would order one again. I really love the frame! I’m also happy with all the new knowledge and tools, which will help me maintain my bikes in the future. Like bleeding the breaks or changing the bottom bracket was nothing I had done before, and this just pushed me to do it (it’s not hard btw). But I guess I had this romantic image in my head where the frame arrived and then I just assemble it in one or two days and then get to go on a ride. Which maybe could have happened, if I had spent more time on checking what I needed. Anyhow: frame good, ordering good, bike tooling and bike parts bad.

the bike

The money

This will be split into two parts:

  • Cost of the bike
  • Everything I actually got/had to get

In neither case I went hunting for the best price or product for that matter.

Cost of the bike

Money that went into making this a functional, rideable bike.

  • Light carbon order: ~1.490 €, split up into:
    • Frame, handlebars, seat post, bottom bracket: 840€
    • Carbon wheels: 320€
    • Bottle cages: 26€
    • Shipping and fees: 300€
  • 105 group set: 430€
  • Discs + spacer + pads: 100€
  • Tubes: 8€
  • Tires: 92€
  • Handlebar tape: 8€
  • Pre waxed Chain: 36€
  • Outer shifting cable: 10€

Makes ~2200€ in total. I had a saddle and pedals at hand, so consider this, but these would not come with a store bought bike either…

Cost of building the bike

This will be everything I had to get, to go from “doing some maintenance on a gravel bike” to “assembling a bike”.

  • Chain pliers: 10€
  • Chain wrench: 32€
  • Bleed kit & oil: 32€
  • Centerlock tool: 20€
  • 3* bottom bracket tool: ~100€
  • Carbon paste: 10€

So at least 200€ more, while all of these could have been borrowed. The torque wrench I had gotten (a little ahead of time) would almost double that, since I’m seemingly unable to go cheap. The second torque wrench is a friends. This really is individual and mostly relevant to myself.

Was it worth it?

This is hard to judge, since this bike does not exist on the market. So I started thinking about it this way:

  • Would I have gotten a road bike, if not building it? Yes. Maybe not this year, but within the next 1-3 years for sure.
  • Would I have least a bike? No. I believe in owning stuff, and my job doesn’t offer it anyway.
  • How much would I have spent on a bike? I’m in love with the Canyon Aeroad ever since I saw it, which ain’t cheap.

I don’t think I would have dropped 4-8k on an Aeroad, even used they are a little too pricey for me atm. Also, even when not considering differences in frame and wheels (that I can’t judge), I have cheaper components than any version of the Aeroad. That said, I have a hard time finding a carbon frame (and wheels) for around 2k new. So I like to imagine that I did indeed save some money (not billing my time ofc). A highly subjective verdict obviously.

If you are looking for guidance and the above is not enough: I would not recommend doing this for your first bike. Rather get a “complete” bike, go out riding, enjoy summer, learn something about bikes first. If you already have a bike, some tools, friends with tools, an open bike shop close by, this might be something for you. You can learn a lot, and I feel a lot more confident in maintaining bikes now.

0

Wealth inequality will destroy America.

preview

This cartoon from The Seattle Times illustrates how America’s economic pizza is actually sliced per capita, highlighting the massive disparity between the Top 1%, the merely wealthy, the upper middle class, and the lower 50%.

This cartoon from The Seattle Times illustrates how America’s economic pizza is actually sliced per capita, highlighting the massive disparity between the Top 1%, the merely wealthy, the upper middle class, and the lower 50%.

487

'Unprecedented' Cyberattack cripples supermarket fridges across Europe as hackers activate automatic defrosting — delivery and store prices also impacted by incident

Tom's Hardware 'Unprecedented' Cyberattack cripples supermarket fridges across Europe as hackers activate automatic defrosting&nbsp; &mdash; delivery and store prices also impacted by incident www.tomshardware.com
55

*Rule*dium vs *rule*mium

preview
Explanation

Indium is an extremely soft metal. You can literally chew it like gum. Marin is cute, I guess soft (?) and just…precious 💜 Chromium is a very hard metal. Astolfo is hard. No explanation needed.

Explanation

Indium is an extremely soft metal. You can literally chew it like gum. Marin is cute, I guess soft (?) and just…precious 💜 Chromium is a very hard metal. Astolfo is hard. No explanation needed.

0

Agata Mamoń Prokop - wywiad z uczestniczką Ruchu Wolność i Pokój

play · youtube.com
YouTube Agata Mamoń Prokop - wywiad z uczestniczką Ruchu Wolność i Pokój www.youtube.com
preview

Kolejna ciekawa kobieta.

Dla kontekstu: Wolność i pokój to anarchistyczna grupa z lat '80. Kobiety ciekawie opowiadają m.in. o tym, że męscy działacze tej grupy już sami się zareklamowali lata temu.

WiP to w pewnym sensie początek anarchizmu, który teraz, 40 lat później, jest w Polsce.

Kolejna ciekawa kobieta.

Dla kontekstu: Wolność i pokój to anarchistyczna grupa z lat '80. Kobiety ciekawie opowiadają m.in. o tym, że męscy działacze tej grupy już sami się zareklamowali lata temu.

WiP to w pewnym sensie początek anarchizmu, który teraz, 40 lat później, jest w Polsce.