0

La SNCB envisage de redonner vie à l'espace de l'ancienne gare Saint-Lambert #abandonnée

TodayInLiege La SNCB envisage de redonner vie à l'espace de l'ancienne gare Saint-Lambert #abandonnée www.todayinliege.be
preview

Son accès est condamné depuis un an et la mise en service de la nouvelle gare en surface le rend actuellement inutile. La SNCB lance une phase exploratoire afin d’identifier des projets capables de valoriser l’ancien bâtiment de gare de Liège-Saint-Lambert (ex-gare de Liège-Palais ), situé en sous-sol. Il serait en effet dommage de laisser inoccupée […]

Son accès est condamné depuis un an et la mise en service de la nouvelle gare en surface le rend actuellement inutile. La SNCB lance une phase exploratoire afin d’identifier des projets capables de valoriser l’ancien bâtiment de gare de Liège-Saint-Lambert (ex-gare de Liège-Palais ), situé en sous-sol. Il serait en effet dommage de laisser inoccupée […]

0

Is this a big deal?

preview

So I went to the gas station to get a drink and some candy. The drink I got was a Sprite zero in a bottle. And then for the candy, I got four of those miniature Mike and Ike boxes. On the box of Mike and Ike it says you can get three for $.99. I got four. So I went up to the counter to pay for everything and I noticed the guy at the register scanned only three of the Mike and Ike boxes. Because they were all the same thing, all he had to do was scan one of them four times. But he only scanned it three times, And I noticed it, but I didn’t say anything. And it wasn’t necessarily because I was trying to benefit from getting anything that I didn’t pay for, but it was because sometimes I tend to hesitate to say things immediately or speak up on things, and so I just decided to just go with whatever. And the total amount for everything was $5.14. I wanted to know what everybody else thought of this? And is this a big deal?

So I went to the gas station to get a drink and some candy. The drink I got was a Sprite zero in a bottle. And then for the candy, I got four of those miniature Mike and Ike boxes. On the box of Mike and Ike it says you can get three for $.99. I got four. So I went up to the counter to pay for everything and I noticed the guy at the register scanned only three of the Mike and Ike boxes. Because they were all the same thing, all he had to do was scan one of them four times. But he only scanned it three times, And I noticed it, but I didn’t say anything. And it wasn’t necessarily because I was trying to benefit from getting anything that I didn’t pay for, but it was because sometimes I tend to hesitate to say things immediately or speak up on things, and so I just decided to just go with whatever. And the total amount for everything was $5.14. I wanted to know what everybody else thought of this? And is this a big deal?

0

Dlaczego nie uprawiamy? - Warszawa, 15.11.2026

preview

cross-posted from: szmer.info/post/17044079

cross-posted from: szmer.info/post/17044078

🗓️ 13 listopada, 18.00 📌 pufy pod żółtymi schodami w budynku WLS, Dobra 55

🏀 Sport na uczelni to dla większości z nas tylko obowiązkowy WF, który trzeba odklepać. Tymczasem UW i inne uczelnie dysponują świetną infrastrukturą sportową, która często stoi pusta. Korzystanie z sal sportowych i siłowni poza zajęciami graniczy z niemożliwością. Równocześnie na niemal każdym wydziale znajdziemy plakaty reklamujące zniżki na drogi karnet na siłownie jednej z dużych sieci fitness.

🗣️ Spotkamy się, żeby wspólnie zdiagnozować problemy ze sportem na uczelni. Zastanowimy się, jak powinien wyglądać dostęp do infrastruktury sportowej i czego musimy wymagać w tej kwestii od władz uczelni.

🗞️ Spotkanie nawiązuje do tekstu „Jak nie promować kultury fizycznej: sport na uczelniach” Filipa Bijaka i Stanisława Sieniawskiego z najnowszego numeru Alarmu Studenckiego. Możecie go przeczytać na mlodzi.ozzip.pl/alarm.

👋 Do zobaczenia!

cross-posted from: szmer.info/post/17044079

cross-posted from: szmer.info/post/17044078

🗓️ 13 listopada, 18.00 📌 pufy pod żółtymi schodami w budynku WLS, Dobra 55

🏀 Sport na uczelni to dla większości z nas tylko obowiązkowy WF, który trzeba odklepać. Tymczasem UW i inne uczelnie dysponują świetną infrastrukturą sportową, która często stoi pusta. Korzystanie z sal sportowych i siłowni poza zajęciami graniczy z niemożliwością. Równocześnie na niemal każdym wydziale znajdziemy plakaty reklamujące zniżki na drogi karnet na siłownie jednej z dużych sieci fitness.

🗣️ Spotkamy się, żeby wspólnie zdiagnozować problemy ze sportem na uczelni. Zastanowimy się, jak powinien wyglądać dostęp do infrastruktury sportowej i czego musimy wymagać w tej kwestii od władz uczelni.

🗞️ Spotkanie nawiązuje do tekstu „Jak nie promować kultury fizycznej: sport na uczelniach” Filipa Bijaka i Stanisława Sieniawskiego z najnowszego numeru Alarmu Studenckiego. Możecie go przeczytać na mlodzi.ozzip.pl/alarm.

👋 Do zobaczenia!

0

«C’est le meilleur métier du monde, mais je suis fatigué de venir travailler et de ne plus avoir de vie»: aux CFF, les mécaniciens tirent la sonnette d’alarme - Le Temps

«C’est le meilleur métier du monde, mais je suis fatigué de venir travailler et de ne plus avoir de vie»: aux CFF, les mécaniciens tirent la sonnette d’alarme - Le Temps www.letemps.ch
preview

Comme c’est souvent le cas, la fin d’année s’annonce particulièrement crispante pour les mécaniciens de locomotive des CFF. Entre des heures supplémentaires qui s’accumulent, un planning 2027 contesté et une fatigue chronique, employés et syndicats demandent plus de reconnaissance.

https://archive.is/Dwdib

Comme c’est souvent le cas, la fin d’année s’annonce particulièrement crispante pour les mécaniciens de locomotive des CFF. Entre des heures supplémentaires qui s’accumulent, un planning 2027 contesté et une fatigue chronique, employés et syndicats demandent plus de reconnaissance.

https://archive.is/Dwdib

0

Jensen Huang: The Spy Who Shagged Me (allegedly)

preview

and everyone’s known it since 2025

www.youtube.com/watch?v=JdiHDQe0_U4&list=UU9rJrMV… - video
…libsyn.com/20261110-jensen-huang-the-spy-who-sha… - podcast

time: 7 min 35 sec

and everyone’s known it since 2025

www.youtube.com/watch?v=JdiHDQe0_U4&list=UU9rJrMV… - video
…libsyn.com/20261110-jensen-huang-the-spy-who-sha… - podcast

time: 7 min 35 sec

0

Space Launch Now - Launch Database

Space Launch Now Space Launch Now - Launch Database spacelaunchnow.app
preview

cross-posted from: lemmy.ca/post/73673384

This is a nearly complete collection of orbital spaceflight, we’re working diligently to get to 100% coverage. We’ve collected all of manned spaceflight and are working to collect unmanned spaceflight’s.

also see

spacelaunchnow.app/launch/upcoming/

spacelaunchnow.app/launch/previous/

cross-posted from: lemmy.ca/post/73673384

This is a nearly complete collection of orbital spaceflight, we’re working diligently to get to 100% coverage. We’ve collected all of manned spaceflight and are working to collect unmanned spaceflight’s.

also see

spacelaunchnow.app/launch/upcoming/

spacelaunchnow.app/launch/previous/

0

Tow New Warhammer: The Horus Heresy Battle Groups March Into Action

Tabletop Sentinel Two New Warhammer: The Horus Heresy Battle Groups March Into Action www.tabletopsentinel.com
preview

Tow New Warhammer: The Horus Heresy Battle Groups March Into Action. Recently we’ve looked at the new Battleforce Boxes for Warhammer Age of Sigmar and Warhammer 40,000, but they aren’t the only new limited sets. Today we look at two new Battle Groups being released for Warhammer: The Horus Heresy. tabletopsentinel.com/…/tow-new-warhammer-the-horu…

Tow New Warhammer: The Horus Heresy Battle Groups March Into Action. Recently we’ve looked at the new Battleforce Boxes for Warhammer Age of Sigmar and Warhammer 40,000, but they aren’t the only new limited sets. Today we look at two new Battle Groups being released for Warhammer: The Horus Heresy. tabletopsentinel.com/…/tow-new-warhammer-the-horu…

0

The Banking Oligopoly We Deserve? (Peter Nowak)

The Banking Oligopoly We Deserve? shareapod.com
preview

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

0

As You Wake, Break the Shell - Becky Chambers

preview

Just bought the ebook. There are a gazillion good reviews on Internet, so I have high hopes. I’m finishing a book right now, then I’ll read it and post my thoughts here.

Anybody here already read it?

Just bought the ebook. There are a gazillion good reviews on Internet, so I have high hopes. I’m finishing a book right now, then I’ll read it and post my thoughts here.

Anybody here already read it?

0

The Banking Oligopoly We Deserve? (Peter Nowak)

The Banking Oligopoly We Deserve? shareapod.com
preview

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

0

The Banking Oligopoly We Deserve? (Peter Nowak)

The Banking Oligopoly We Deserve? shareapod.com
preview

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

Peter Nowak of donotpassgo.ca podcast interviews Globe and Mail personal finance columnist Rob Carrick regarding new measures in the industry, Mark Carney’s approach to banking, and why Canadians’ reluctance to switch banks helps maintain the oligopoly.

also feel free to join our recently-launched discord: discord.gg/pFZWSdMxn

0

[Feature Request] Show crosspost count info during new post flow (PieFed?)

preview

IDK about Lemmy, but PieFed shows cross post info in article posts that have a common link (e.g., “Crossposted 3 times” - e.g., piefed.zip/post/1980772)

Summit already shows this information once an article has been posted. Requesting, like in the PieFed web UI, this information get added to the new post flow once a link is pasted.

This helps to identify before posting if a URL has already been shared pretty broadly, and if discussions are happening elsewhere in the fediverse.

IDK about Lemmy, but PieFed shows cross post info in article posts that have a common link (e.g., “Crossposted 3 times” - e.g., piefed.zip/post/1980772)

Summit already shows this information once an article has been posted. Requesting, like in the PieFed web UI, this information get added to the new post flow once a link is pasted.

This helps to identify before posting if a URL has already been shared pretty broadly, and if discussions are happening elsewhere in the fediverse.

0

Q&A: 'AI has become a major force shaping our world,' says ""expert""

Phys.org Q&A: 'AI has become a major force shaping our world,' says expert phys.org
preview

One of the key insights that led to the recent explosive advancement in AI capability is this: to build better AI, just give it more data and more computational power (i.e., larger neural networks, longer training time, etc.). In other words, simply scaling up produces qualitatively new capabilities: you use the same data, but make the neural network larger, and all of a sudden the AI can do all sorts of things it couldn’t do before; you give the model more data, and all of a sudden it can do advanced mathematics.

In the past, AI scientists thought we needed new scientific insights in order to build smarter machines. But during the “scaling era,” AI scientists realized they just needed to scale up existing ideas.

This is PURE GOLD 10/10 must read, every sentence is accidental poetry.

Link to the full dosage ai100.stanford.edu/sites/…/ai100_report_2026.pdf

This kind of thing just puts hardworking comedy and satire writers out of business, it is cruel and it needs to stop!

A growing body of work demonstrates that improvements in data quality—through deduplication, pruning, and prioritization—can reduce the need for larger datasets while maintaining or improving performance.237 These findings suggest a shift from treating data as a quantity to be maximized toward treating it as a resource to be optimized, with carefully curated datasets often yielding greater value than continued expansion of raw data volume.23

One of the key insights that led to the recent explosive advancement in AI capability is this: to build better AI, just give it more data and more computational power (i.e., larger neural networks, longer training time, etc.). In other words, simply scaling up produces qualitatively new capabilities: you use the same data, but make the neural network larger, and all of a sudden the AI can do all sorts of things it couldn’t do before; you give the model more data, and all of a sudden it can do advanced mathematics.

In the past, AI scientists thought we needed new scientific insights in order to build smarter machines. But during the “scaling era,” AI scientists realized they just needed to scale up existing ideas.

This is PURE GOLD 10/10 must read, every sentence is accidental poetry.

Link to the full dosage ai100.stanford.edu/sites/…/ai100_report_2026.pdf

This kind of thing just puts hardworking comedy and satire writers out of business, it is cruel and it needs to stop!

A growing body of work demonstrates that improvements in data quality—through deduplication, pruning, and prioritization—can reduce the need for larger datasets while maintaining or improving performance.237 These findings suggest a shift from treating data as a quantity to be maximized toward treating it as a resource to be optimized, with carefully curated datasets often yielding greater value than continued expansion of raw data volume.23

0

Do dogs produce snot?

preview

My dog had a sneezing fit all over my shirt and while it got wet, I realized I never see boogers from her like I would produce. Got me wondering whether dogs even have mucous production like us, and whether dog snot is a thing.

(And yes, I changed my shirt.)

My dog had a sneezing fit all over my shirt and while it got wet, I realized I never see boogers from her like I would produce. Got me wondering whether dogs even have mucous production like us, and whether dog snot is a thing.

(And yes, I changed my shirt.)

0

Canadian Made Rubber Boot

preview

I’m looking for a good Canadian made rubber boot or gum boot. Baffin are poor unless you need steel toes or insulation which I don’t. I’ve had three pairs of Original Muck Boots (I don’t know if they are Canadian), all three lasted a couple of months before leaking. The XtraTuf boot is good but American.

Any ideas?

I’m looking for a good Canadian made rubber boot or gum boot. Baffin are poor unless you need steel toes or insulation which I don’t. I’ve had three pairs of Original Muck Boots (I don’t know if they are Canadian), all three lasted a couple of months before leaking. The XtraTuf boot is good but American.

Any ideas?

0

Coffy (1973) Dir. Jack Hill, Starring Pam Grier, Booker Bradshaw, Robert DoQui, Sid Haig - TRAILER - Pam Grier stars as Coffy, nurse by day, vigilante by night

preview

Nurse Flower Child Coffin, aka Coffy (Pam Grier), poses as a honeypot by night, gets herself into the intimate spaces of drug pushers, and dispatches them with a shotgun as revenge for what happened to her sister, who is in a coma from doing bad drugs. Among the top tier 70s era “blaxploitation” movies, with lots of sleazy sexuality, brutal kills, and campy racism. Probably not a great movie for a first date, but still lots of fun.

This was successful enough in its own time that Jack Hill wanted to make a sequel, but was unable to get the rights to do so. So he created a Spiritual Successor, Foxy Brown (1974) (not to be confused for the hip hop musician), which also stars Pam Grier and has a similar plot.

Trigger warning because some of the violence and sex is uncomfortable, although I don’t recall there being any straight-up sexual assault. Still, watch with caution if that sort of thing distresses you.

The soundtrack is funky, found it on Youtube: https://www.youtube.com/watch?v=XiD0772uRNg&list=PLnZWaoAQiQcDcplYxr9KgdTdD9vv-ERJP

fR3u2bcZfx3h98c.jpg

Nurse Flower Child Coffin, aka Coffy (Pam Grier), poses as a honeypot by night, gets herself into the intimate spaces of drug pushers, and dispatches them with a shotgun as revenge for what happened to her sister, who is in a coma from doing bad drugs. Among the top tier 70s era “blaxploitation” movies, with lots of sleazy sexuality, brutal kills, and campy racism. Probably not a great movie for a first date, but still lots of fun.

This was successful enough in its own time that Jack Hill wanted to make a sequel, but was unable to get the rights to do so. So he created a Spiritual Successor, Foxy Brown (1974) (not to be confused for the hip hop musician), which also stars Pam Grier and has a similar plot.

Trigger warning because some of the violence and sex is uncomfortable, although I don’t recall there being any straight-up sexual assault. Still, watch with caution if that sort of thing distresses you.

The soundtrack is funky, found it on Youtube: https://www.youtube.com/watch?v=XiD0772uRNg&list=PLnZWaoAQiQcDcplYxr9KgdTdD9vv-ERJP

fR3u2bcZfx3h98c.jpg

0

My linocut block printing experiment with PLA

Imgur 3d printed stamps /linocut imgur.com
preview

imgur.com/a/oGgJsQq (Photos)

So firstly I’ll explain the photos then the process.

The molotov cocktail was basic PLA. The ink was printed on printer paper with speedball fabric block ink.

The cat stamp. There are 3 versions. The small one (with a missing line on the teeth) was tpu glued to pla backing.

I tried both stamp ink (teal) and speedball ink (black).

The two larger ones printed in lime green are both PLA. I just tried one with ironing on and ironing off and slightly adjusted the design to remove smooth edges because traditional lino carving has sharper edges on the positive parts.

Okay so now I’ll explain my method.

I sketched both design ideas on paper and scanned them. I then used Adobe illustrator to make a vector drawing.

I imported into Blender but the vector was all messed up. Artifacts and such.

So I went back to illustrator. Exported the vector image as a png file. Loaded that into a vector tracer program. Had a new vector svg file made.

Loaded that into blender. That worked. Extruded (as a curve object). Then converted to mesh object.

The molotov needed additional work to prepare for printing. I used Photoshop to help divide and make masks for the areas that would be printed with different colors. Determined the appropriate order.

Decided to print them all with the same size backplate for easy positioning.

When I imported the svg files into Blender and made the “stamp” I added ovals to the ends of the plates with excess negative space to make them balanced when pressing down on the paper.

Mounted to a surface. Oval for cats. Rectangle for molotov.

I made it so the extruded pattern was 2mm thick and the bottom 1mm for the TPU print (one of the cats) and 1.5mm-2mm thick for the full PLA prints. (Ish). I can’t remember the exact thicknesses.

Total thickness for molotov (full PLA) was ~3.5mm.

The one cat I printed in TPU (95a) was glued to an oval of PLA for support.

All 3d prints were solid. No infill. 3 walls. Both for pla and tpu.

All surfaces of the stamp / linocut were sanded. The regular PLA sanded down easy with 220m The TPU was harder to smooth. I used 100 to start with and it still took forever. And then a little with 220 once I was satisfied.

As mentioned, I tried both stamp ink and block printing ink on the cats.

Usually with linocut printing the paper goes on to the stamp/block/linocut, but I did this old school stamp style. Putting the stamp on the paper and pressing down. I used a hard brayer to help with this part.

For the molotov, I used a pencil to trace a rectangle on the paper and used this as a guide to position the stamp plate from each color. I also let each color dry for 2 hours between them.

It seemed like the block ink looked considerably better on the TPU (the tooth missing cat stamp) but I also did make another TPU print of a different design (not in photos) and the quality was not better with the TPU for block ink (speedball). So I no longer am experimenting with it. Though I do plan to try Petg since it’s more flexible than pla.

TPU is better with stamp ink than PLA but I’m not planning on using stamp ink. That was just to see if it worked. But if that’s what you plan to use, make the stamps out of TPU.

The speedball inks aren’t the best but I only use my good expensive inks on “prints”.

So you will notice the quality isn’t super great. Plus my old blue was nearly dried up.

The black usually prints decent but didn’t look great on the molotov.

Anyway. I think that’s all the details.

I have experience in the arts and do make actual linocut prints. So I already had all of those tools and some printing ink.

I think there are limits on 3d printing linocut designs. But honestly it was considerably less time than making real ones. And since I made uniform rectangles for the molotov , I was able to get pretty good alignment without a bunch of additional work that is usually required for multicolor prints.

I do have a rolling press, and I’m sure I could get better results with that.

I’d also like to try 3d printing the designs in a smaller nozzle for better detail.

imgur.com/a/oGgJsQq (Photos)

So firstly I’ll explain the photos then the process.

The molotov cocktail was basic PLA. The ink was printed on printer paper with speedball fabric block ink.

The cat stamp. There are 3 versions. The small one (with a missing line on the teeth) was tpu glued to pla backing.

I tried both stamp ink (teal) and speedball ink (black).

The two larger ones printed in lime green are both PLA. I just tried one with ironing on and ironing off and slightly adjusted the design to remove smooth edges because traditional lino carving has sharper edges on the positive parts.

Okay so now I’ll explain my method.

I sketched both design ideas on paper and scanned them. I then used Adobe illustrator to make a vector drawing.

I imported into Blender but the vector was all messed up. Artifacts and such.

So I went back to illustrator. Exported the vector image as a png file. Loaded that into a vector tracer program. Had a new vector svg file made.

Loaded that into blender. That worked. Extruded (as a curve object). Then converted to mesh object.

The molotov needed additional work to prepare for printing. I used Photoshop to help divide and make masks for the areas that would be printed with different colors. Determined the appropriate order.

Decided to print them all with the same size backplate for easy positioning.

When I imported the svg files into Blender and made the “stamp” I added ovals to the ends of the plates with excess negative space to make them balanced when pressing down on the paper.

Mounted to a surface. Oval for cats. Rectangle for molotov.

I made it so the extruded pattern was 2mm thick and the bottom 1mm for the TPU print (one of the cats) and 1.5mm-2mm thick for the full PLA prints. (Ish). I can’t remember the exact thicknesses.

Total thickness for molotov (full PLA) was ~3.5mm.

The one cat I printed in TPU (95a) was glued to an oval of PLA for support.

All 3d prints were solid. No infill. 3 walls. Both for pla and tpu.

All surfaces of the stamp / linocut were sanded. The regular PLA sanded down easy with 220m The TPU was harder to smooth. I used 100 to start with and it still took forever. And then a little with 220 once I was satisfied.

As mentioned, I tried both stamp ink and block printing ink on the cats.

Usually with linocut printing the paper goes on to the stamp/block/linocut, but I did this old school stamp style. Putting the stamp on the paper and pressing down. I used a hard brayer to help with this part.

For the molotov, I used a pencil to trace a rectangle on the paper and used this as a guide to position the stamp plate from each color. I also let each color dry for 2 hours between them.

It seemed like the block ink looked considerably better on the TPU (the tooth missing cat stamp) but I also did make another TPU print of a different design (not in photos) and the quality was not better with the TPU for block ink (speedball). So I no longer am experimenting with it. Though I do plan to try Petg since it’s more flexible than pla.

TPU is better with stamp ink than PLA but I’m not planning on using stamp ink. That was just to see if it worked. But if that’s what you plan to use, make the stamps out of TPU.

The speedball inks aren’t the best but I only use my good expensive inks on “prints”.

So you will notice the quality isn’t super great. Plus my old blue was nearly dried up.

The black usually prints decent but didn’t look great on the molotov.

Anyway. I think that’s all the details.

I have experience in the arts and do make actual linocut prints. So I already had all of those tools and some printing ink.

I think there are limits on 3d printing linocut designs. But honestly it was considerably less time than making real ones. And since I made uniform rectangles for the molotov , I was able to get pretty good alignment without a bunch of additional work that is usually required for multicolor prints.

I do have a rolling press, and I’m sure I could get better results with that.

I’d also like to try 3d printing the designs in a smaller nozzle for better detail.

0

Farm cat converted

preview

This cat appeared on the farm we live on early 2023, we started feeding her and she became a regular visitor but would only feed outside.

We tried to coax her in but she was having none of it. June 25 we got our own cat and slowly she started to trust us. Fast forward to the last two days when she’s finally ventured upstairs and now rarely leaves our bed.

In the last three weeks she has shown no sign of wanting to even go outside again despite us leaving the door wide open for her. Guess she’s an indoor cat now.

Edit: Btw, her name is Fraggle. Yes because of Fraggle Rock 🤣 we’re both in our 50s and watched it growing up

This cat appeared on the farm we live on early 2023, we started feeding her and she became a regular visitor but would only feed outside.

We tried to coax her in but she was having none of it. June 25 we got our own cat and slowly she started to trust us. Fast forward to the last two days when she’s finally ventured upstairs and now rarely leaves our bed.

In the last three weeks she has shown no sign of wanting to even go outside again despite us leaving the door wide open for her. Guess she’s an indoor cat now.

Edit: Btw, her name is Fraggle. Yes because of Fraggle Rock 🤣 we’re both in our 50s and watched it growing up

0

Eo-jjeol su-ga eop-da, Park Chan-wook (2025)

wide shot of a modern house in the countryside, a garden and trees to the left. A suspicious character enters the frame quietly from the left, trying not to be seen by another character sitting on the garage's stairs to the right. The construcion is concrete grey, nature appears in shades of green, red and yellow.
preview

Notice the guy walking crouched on the left side, suspicious AF, and the other character sitting on the stairs to the other side. They’re small in the frame, but give it a lot of tension. Everything about it screams dark comedy.

In English: No Other Choice.

Notice the guy walking crouched on the left side, suspicious AF, and the other character sitting on the stairs to the other side. They’re small in the frame, but give it a lot of tension. Everything about it screams dark comedy.

In English: No Other Choice.

0

AppleTV has terrible opening credits.

preview

They are nearly all bad, or ripping off a similar vibe. Severance is great, dark.matter too if I hadn’t seen severance first.

Off the top: * Severance - Great * Dark Matter - Good but derivative of severance * Silo - Good but style is common now * Nocturne - Boring boring nonsense cuts of nothing. Temu credits. * Your Friends and Neighbours - Looks weird, why couldn’t it have been live action? * Blackbird - Terrible, random cuts of shite. Looks like a ps2 teaser trailer. Nonsensical. You could take any of the pieces and swap with Nocturne and no one would notice.

They are nearly all bad, or ripping off a similar vibe. Severance is great, dark.matter too if I hadn’t seen severance first.

Off the top: * Severance - Great * Dark Matter - Good but derivative of severance * Silo - Good but style is common now * Nocturne - Boring boring nonsense cuts of nothing. Temu credits. * Your Friends and Neighbours - Looks weird, why couldn’t it have been live action? * Blackbird - Terrible, random cuts of shite. Looks like a ps2 teaser trailer. Nonsensical. You could take any of the pieces and swap with Nocturne and no one would notice.

0

Pour suspendre la plateforme des pétitions de l’Assemblée nationale ou lui donner enfin une véritable portée démocratique

Pour suspendre la plateforme des pétitions de l’Assemblée nationale ou lui donner enfin une véritable portée démocratique - Pour suspendre la plateforme des pétitions de l’Assemblée nationale ou lui donner enfin une véritable portée démocratique - Plateforme des pétitions de l’Assemblée nationale petitions.assemblee-nationale.fr