0

HID Remapper

preview

This clever gizmo turns any USB input devices - or combination of input devices - into any other HID device. Different versions also accept individual switches as inputs.

This means if you have trouble using a mouse, you can turn a joystick or a gamepad into a mouse.

Or if you can use a mouse but you can’t click, you can remap the button to some other switch, like a foot pedal.

The possibilities seem endless, but it is a bit on the geeky side. If you’re not the technical type, you might want to get some help from a computer or electronics engineer to put together your ideal setup with that one.

Check out the manual’s section on accessibility:

www.remapper.org/manual/#accessibility-applicatio…

This clever gizmo turns any USB input devices - or combination of input devices - into any other HID device. Different versions also accept individual switches as inputs.

This means if you have trouble using a mouse, you can turn a joystick or a gamepad into a mouse.

Or if you can use a mouse but you can’t click, you can remap the button to some other switch, like a foot pedal.

The possibilities seem endless, but it is a bit on the geeky side. If you’re not the technical type, you might want to get some help from a computer or electronics engineer to put together your ideal setup with that one.

Check out the manual’s section on accessibility:

www.remapper.org/manual/#accessibility-applicatio…

0

Atkinson Hyperlegible Font - Braille Institute

Braille Institute Atkinson Hyperlegible Font - Braille Institute www.brailleinstitute.org
preview

This font is awesome!

I’m not blind but my eyesight isn’t what it used to be, like all men my age, and this font really is legible at a much smaller size even for me.

This font is awesome!

I’m not blind but my eyesight isn’t what it used to be, like all men my age, and this font really is legible at a much smaller size even for me.

0

Let PETG 3D-printed parts cool down slowly on the bed of the printer to avoid warping

preview

I’ve been printing quite a few registration plates to hold parts in place in production that need to sit as flat as possible on the production jigs.

I’ve noticed that taking the finished parts off the bed of the printer too soon causes them to warp: they come off the bed looking nicely set and straight, but as they finish cooling down unsupported, they slowly warp until they finally fully reach room temperature after 10 or 15 minutes.

So now I let them cool down slowly on the bed of the printer after the print is done. Ideally I let the bed cool down to room temperature: then the parts readily separate naturally as they shrink. If I’m in a hurry, I’ll still wait until the parts release with very little force, around 35C - but no hotter than that, to avoid warping - as in this video.

I’ve been printing quite a few registration plates to hold parts in place in production that need to sit as flat as possible on the production jigs.

I’ve noticed that taking the finished parts off the bed of the printer too soon causes them to warp: they come off the bed looking nicely set and straight, but as they finish cooling down unsupported, they slowly warp until they finally fully reach room temperature after 10 or 15 minutes.

So now I let them cool down slowly on the bed of the printer after the print is done. Ideally I let the bed cool down to room temperature: then the parts readily separate naturally as they shrink. If I’m in a hurry, I’ll still wait until the parts release with very little force, around 35C - but no hotter than that, to avoid warping - as in this video.

0

[SOLVED] Why is FreeCAD symmetry-stupid?

preview

Maybe there’s something I don’t understand here. I’d love it if someone told me how to do the following.

Let’s say I have some really complex shape in a sketch left of the Y axis: it takes me forever to get it just right. Then I need to mirror it on the right side of the Y axis and connect the two halves.

In SolidWorks, it’s trivial: mirror the stuff, done. If you change the master shape on the left, the change is reflected on the right.

In FreeCAD, the best you can do is make a mirror copy of the left-hand side elements - which also makes copies of the constraints which are completely independent from the original constraints on the left-hand side - delete the stupid new right-hand side constraints and slowly, painfully constrain the right-hand side copies to the original left-hand side elements, trying to dodge the dreaded orange over-constraints all the time. It’s long, it’s painful, and the end-result is usually so fragile that if you change anything significant on the left-hand side, the sketch turns orange and then it’s back to hunting broken constraints again.

Surely it can’t be that painful. Am I missing something obvious?

Maybe there’s something I don’t understand here. I’d love it if someone told me how to do the following.

Let’s say I have some really complex shape in a sketch left of the Y axis: it takes me forever to get it just right. Then I need to mirror it on the right side of the Y axis and connect the two halves.

In SolidWorks, it’s trivial: mirror the stuff, done. If you change the master shape on the left, the change is reflected on the right.

In FreeCAD, the best you can do is make a mirror copy of the left-hand side elements - which also makes copies of the constraints which are completely independent from the original constraints on the left-hand side - delete the stupid new right-hand side constraints and slowly, painfully constrain the right-hand side copies to the original left-hand side elements, trying to dodge the dreaded orange over-constraints all the time. It’s long, it’s painful, and the end-result is usually so fragile that if you change anything significant on the left-hand side, the sketch turns orange and then it’s back to hunting broken constraints again.

Surely it can’t be that painful. Am I missing something obvious?

0

MNT Reform laptop ordered

preview

You might recall that I was considering a MNT Reform laptop to replace my crappy HP laptop a few months ago.

Well, I got no answer or information of any kind anywhere (not just here on Lemmy), but the idea kept going round and round in the back of my head. And now, 5 months later, I find myself having to upgrade Mint to Wilma on my hateful HP laptop soon, and I already dread rebooting to the console because Xorg is dead again, having to downgrade to a working version of the kernel again, fighting the AMDGPU driver again, making the super-flaky and completely terrible wifi-cum-bluetooth Realtek 8821CE adapter work halfway decently again…

I hate this laptop. In fact, I hate it so much that I finally pulled the trigger on the MNT Reform laptop. Hopefully it’ll get here before the need to upgrade becomes too pressing.

Stay tuned 🙂

You might recall that I was considering a MNT Reform laptop to replace my crappy HP laptop a few months ago.

Well, I got no answer or information of any kind anywhere (not just here on Lemmy), but the idea kept going round and round in the back of my head. And now, 5 months later, I find myself having to upgrade Mint to Wilma on my hateful HP laptop soon, and I already dread rebooting to the console because Xorg is dead again, having to downgrade to a working version of the kernel again, fighting the AMDGPU driver again, making the super-flaky and completely terrible wifi-cum-bluetooth Realtek 8821CE adapter work halfway decently again…

I hate this laptop. In fact, I hate it so much that I finally pulled the trigger on the MNT Reform laptop. Hopefully it’ll get here before the need to upgrade becomes too pressing.

Stay tuned 🙂

0

Rectangular selection in the sketcher in the way of 3D navigation

preview

Hey everybody,

After a few months without using FreeCAD (but keeping up with the daily updates) I need to model a quick something today.

And I realize there seems to be a new feature in the 0.22.0-dev version that prevents me from orbiting around the model when I’m in the sketcher:

I use OpenSCAD-style 3D navigation, which means I left-click to rotate the model. In the sketcher, left-clicking is used to do a rectangular lasso selection, and that prevents me from orbiting around the model. I tried with shift, ctrl, alt and all combinations thereof, but there seems to be no way to disable that selection feature.

Fortunately I also use a 3DConnexion Spacemouse, so I’m not completely stuck, but it’s kind of annoying to have to use that thing when I’d rather not move my hand away from the keyboard.

Anybody knows how to disable the lasso thing?

Hey everybody,

After a few months without using FreeCAD (but keeping up with the daily updates) I need to model a quick something today.

And I realize there seems to be a new feature in the 0.22.0-dev version that prevents me from orbiting around the model when I’m in the sketcher:

I use OpenSCAD-style 3D navigation, which means I left-click to rotate the model. In the sketcher, left-clicking is used to do a rectangular lasso selection, and that prevents me from orbiting around the model. I tried with shift, ctrl, alt and all combinations thereof, but there seems to be no way to disable that selection feature.

Fortunately I also use a 3DConnexion Spacemouse, so I’m not completely stuck, but it’s kind of annoying to have to use that thing when I’d rather not move my hand away from the keyboard.

Anybody knows how to disable the lasso thing?

0

Any MNT Reform laptop owner out there for a few questions?

preview

I have a terrible el-cheapo 14" HP laptop that I bought from a big-box store a few years ago as an emergency replacement for a laptop that died on me on the road while visiting a customer. I literally went to the store 5 minutes before it closed, bought any laptop they had, loaded Linux on it at the hotel and transferred my files from the dead laptop overnight, then did my presentation the next morning.

The trouble is, that laptop is VERY Linux unfriendly. I’ve put up with it for years because I don’t like to throw things away, but I just can’t stand the regular AMDGPU driver crashes and the broke-ass wifi-cum-bluetooth Realtek chipset anymore.

So I’m on the market for a good Linux laptop. I’m not a demanding user - I use that HP laptop to edit videos and do CAD and I’m okay with it - I’m very comfortable with anything Linux and I can code my way around problems.

I’m really tempted to get a MNT Reform laptop: I like the LiFePo4 battery cells a lot, it’s solid, it’s open hardware, it has a trackball and I love trackballs, it’s highly hackable, and I’d like to support the MNT Research guys. And I’m old enough and the kids have been out of the house long enough that money is no object.

But a couple of things are holding me back. Maybe there are MNT Reform owners here who could shed some light on the following questions:

  • I don’t know much of the ARM ecosystem, and what to expect from what processor / SoC. So I’m thinking of going with the highest end RK3588 32GB / 256GB CPU module offered by MNT. Would this at least match the performances of my stupid HP laptop’s Ryzen 5 CPU in terms of real-world performances?

    Or put another way: should I expect to take a hit when encoding my videos or doing big CAD models compared to this already slow laptop, or can I reasonably expect the MNT Reform to at least not be a regression.

    Side question (yes, I know it should be obvious, but asking is better than guessing): I assume the “32GB / 256GB” in the CPU module’s denomination is for 32GB of RAM and 256GB of onboard flash. Meaning I’d have that much disk space without needing to add a NVMe SSD card. Correct?

  • The keyboard layout looks all shades of terrible. I’m flexible with anything but not keyboard layouts - and especially those keyboard that don’t put the left SHIFT and CTRL at the bottom where they belong, or have a split space bar.

    The Reform’s keyboard ticks all the wrong boxes for me in that respect: I can tell rightaway that it’s going to fight my typing muscle memory all the time and forever, because I sure ain’t gonna get used to it.

    Can I remap the keys so I can at least I can swap CTRL and whatever that key is at the bottom left, and make the 3 buttons that replace the space bar act as a space bar? Then it’s just a matter of putting a sticker on the keys and gluing the space bar keycaps together somehow.

  • I seem to recall some years ago that if the laptop was left off and unplugged for long enough - like 2 weeks IIRC - it would drain the cells and kill them because there was no under-voltage protection. Less dramatically but equally annoyingly, you couldn’t leave it unplugged for a few days and expect to find it fully charged when you needed it most.

    Does it still do that? Or has the hardware been fixed - or maybe there’s a “Turn really off” option in the little side computer that runs the mini OLED display?

    Mind you, I can always drill a hole and add a physical switch to disconnect the cells, but I’d rather not do that.

  • Is there an option to limit the charge? Keeping Li-ion cells constantly at 100% (or worse, charging all the time) when the laptop is plugged in isn’t ideal. I’d rather it kept the cells charged around 80% . And I mostly use my laptops plugged in.

  • Can I remove the cells and use the laptop plugged in? I might eschew the cells altogether, because I really never need them: I’m plugged in at home, I’m plugged in on the train, I’m plugged in at the hotel, I’m plugged in at the customer’s. I can’t remember a time when I needed to run this particular laptop on battery. If I can use the laptop as a luggable computer, I wouldn’t need to carry the weight of the cells around.

  • Has anybody tried to install Cinnamon? Does it work well on Debian ARM? I see no reason why it shouldn’t, but maybe there are issues.

Well that’s pretty much it. Sorry for the long post 🙂 There’s precious little information about the MNT Reform out there - probably a good indication that there are precious few such machines in the wild, sadly - so I would welcome any real-world user feedback!

I have a terrible el-cheapo 14" HP laptop that I bought from a big-box store a few years ago as an emergency replacement for a laptop that died on me on the road while visiting a customer. I literally went to the store 5 minutes before it closed, bought any laptop they had, loaded Linux on it at the hotel and transferred my files from the dead laptop overnight, then did my presentation the next morning.

The trouble is, that laptop is VERY Linux unfriendly. I’ve put up with it for years because I don’t like to throw things away, but I just can’t stand the regular AMDGPU driver crashes and the broke-ass wifi-cum-bluetooth Realtek chipset anymore.

So I’m on the market for a good Linux laptop. I’m not a demanding user - I use that HP laptop to edit videos and do CAD and I’m okay with it - I’m very comfortable with anything Linux and I can code my way around problems.

I’m really tempted to get a MNT Reform laptop: I like the LiFePo4 battery cells a lot, it’s solid, it’s open hardware, it has a trackball and I love trackballs, it’s highly hackable, and I’d like to support the MNT Research guys. And I’m old enough and the kids have been out of the house long enough that money is no object.

But a couple of things are holding me back. Maybe there are MNT Reform owners here who could shed some light on the following questions:

  • I don’t know much of the ARM ecosystem, and what to expect from what processor / SoC. So I’m thinking of going with the highest end RK3588 32GB / 256GB CPU module offered by MNT. Would this at least match the performances of my stupid HP laptop’s Ryzen 5 CPU in terms of real-world performances?

    Or put another way: should I expect to take a hit when encoding my videos or doing big CAD models compared to this already slow laptop, or can I reasonably expect the MNT Reform to at least not be a regression.

    Side question (yes, I know it should be obvious, but asking is better than guessing): I assume the “32GB / 256GB” in the CPU module’s denomination is for 32GB of RAM and 256GB of onboard flash. Meaning I’d have that much disk space without needing to add a NVMe SSD card. Correct?

  • The keyboard layout looks all shades of terrible. I’m flexible with anything but not keyboard layouts - and especially those keyboard that don’t put the left SHIFT and CTRL at the bottom where they belong, or have a split space bar.

    The Reform’s keyboard ticks all the wrong boxes for me in that respect: I can tell rightaway that it’s going to fight my typing muscle memory all the time and forever, because I sure ain’t gonna get used to it.

    Can I remap the keys so I can at least I can swap CTRL and whatever that key is at the bottom left, and make the 3 buttons that replace the space bar act as a space bar? Then it’s just a matter of putting a sticker on the keys and gluing the space bar keycaps together somehow.

  • I seem to recall some years ago that if the laptop was left off and unplugged for long enough - like 2 weeks IIRC - it would drain the cells and kill them because there was no under-voltage protection. Less dramatically but equally annoyingly, you couldn’t leave it unplugged for a few days and expect to find it fully charged when you needed it most.

    Does it still do that? Or has the hardware been fixed - or maybe there’s a “Turn really off” option in the little side computer that runs the mini OLED display?

    Mind you, I can always drill a hole and add a physical switch to disconnect the cells, but I’d rather not do that.

  • Is there an option to limit the charge? Keeping Li-ion cells constantly at 100% (or worse, charging all the time) when the laptop is plugged in isn’t ideal. I’d rather it kept the cells charged around 80% . And I mostly use my laptops plugged in.

  • Can I remove the cells and use the laptop plugged in? I might eschew the cells altogether, because I really never need them: I’m plugged in at home, I’m plugged in on the train, I’m plugged in at the hotel, I’m plugged in at the customer’s. I can’t remember a time when I needed to run this particular laptop on battery. If I can use the laptop as a luggable computer, I wouldn’t need to carry the weight of the cells around.

  • Has anybody tried to install Cinnamon? Does it work well on Debian ARM? I see no reason why it shouldn’t, but maybe there are issues.

Well that’s pretty much it. Sorry for the long post 🙂 There’s precious little information about the MNT Reform out there - probably a good indication that there are precious few such machines in the wild, sadly - so I would welcome any real-world user feedback!