0

Anybody else hooked on Wow Forever?

preview

Lemmy has seemed a little quieter this week. I know my posting has been affected. Curious if anybody else has been paying more than they should.

Just hit 26 on my mage today.

Lemmy has seemed a little quieter this week. I know my posting has been affected. Curious if anybody else has been paying more than they should.

Just hit 26 on my mage today.

0

Daily bunny no.3503 is waiting for more leaves to fall

preview

A bunny stands outside in their overgrown garden, on a stone path with maple trees all around. Holding a broom in their hand, they watch the boughs of the maple trees patiently, waiting to sweep the leaves as they fall.

Source: Bluesky

A bunny stands outside in their overgrown garden, on a stone path with maple trees all around. Holding a broom in their hand, they watch the boughs of the maple trees patiently, waiting to sweep the leaves as they fall.

Source: Bluesky

0

Has anyone tried fighting the Vanduul yet?

preview

I spent some time last night fighting against the Vanduul, solo. The ships weren’t too difficult when using a ballistic Corsair.

I had my Nursa loaded up in the back and found that I could park on the landing pad next to the Polaris for the FPS portion of the mission. I burned through some Pancea MedGel, but luckily one of the medical lootboxes had some more.

Unfortunately, I missed one of the bosses with a keycard. By the time I went back to check, all the bodies he had probably despawned. So, I probably locked myself out of completing the mission.

I’m going to try again soon and make sure to check all bodies with heavy armor. At the very least, I did walk away with 2 boomtube rocket launchers and some testudo armor.

I spent some time last night fighting against the Vanduul, solo. The ships weren’t too difficult when using a ballistic Corsair.

I had my Nursa loaded up in the back and found that I could park on the landing pad next to the Polaris for the FPS portion of the mission. I burned through some Pancea MedGel, but luckily one of the medical lootboxes had some more.

Unfortunately, I missed one of the bosses with a keycard. By the time I went back to check, all the bodies he had probably despawned. So, I probably locked myself out of completing the mission.

I’m going to try again soon and make sure to check all bodies with heavy armor. At the very least, I did walk away with 2 boomtube rocket launchers and some testudo armor.

0

Text clear button in Link Post title text box is difficult to press

preview

See screenshot.

I’m on Android v17, Samsung OneUI v9.0

Compared to how easy the link text box’s clear text button is to press, the clear text button in the title text box is difficult to press.

I can eventually press it, but it feels like the area to activate the button is very small and off center.

Maybe the word count display is getting in the way?

See screenshot.

I’m on Android v17, Samsung OneUI v9.0

Compared to how easy the link text box’s clear text button is to press, the clear text button in the title text box is difficult to press.

I can eventually press it, but it feels like the area to activate the button is very small and off center.

Maybe the word count display is getting in the way?

0

Linux Mint Installation Issues on a Lenovo Yoga C930

preview

I have attempted to install Mint 22.3 on my old laptop (Lenovo Yoga C930) which was previously running Windows 11 and seem to have no operating system present on the laptop now and can not boot from my USB drive.

I started by downloading Mint 22.3 “Zena” on to a USB drive via Rufus, booted into Mint via the BiOS, and attempted to “Erase Disk and Install Linux Mint” by following the prompts. The install process gave some error messages as it proceeded and took significantly longer than the help videos I had watched beforehand suggested. I left it running over night and came back to it still attempting to install in the morning.

I pressed the power button on the laptop to stop it and when I turned it back on was met with a message along the lines of “remove bootable drive”. The next message I got was “Default Boot Device Missing or Boot Failed”, I hit OK and now there appears to be no OS on the Boot Manager.

When I put the bootable USB back in, the boot manager finds it but when I select it I receive: Failed to open \EFI\BOOT\mmx64.efi - Not Found Failed to load image (blank square): Not Found Failed to start MokManager: Not Found Something has gone seriously wrong: import_mok_state() failed: Not Found

This is my first time attempting to install an operating system so I really am not sure what went wrong or where to go from here, any help would be greatly appreciated.

Edit: successful install! Thank you very much to everyone who took the time to help me out with this :)

I have attempted to install Mint 22.3 on my old laptop (Lenovo Yoga C930) which was previously running Windows 11 and seem to have no operating system present on the laptop now and can not boot from my USB drive.

I started by downloading Mint 22.3 “Zena” on to a USB drive via Rufus, booted into Mint via the BiOS, and attempted to “Erase Disk and Install Linux Mint” by following the prompts. The install process gave some error messages as it proceeded and took significantly longer than the help videos I had watched beforehand suggested. I left it running over night and came back to it still attempting to install in the morning.

I pressed the power button on the laptop to stop it and when I turned it back on was met with a message along the lines of “remove bootable drive”. The next message I got was “Default Boot Device Missing or Boot Failed”, I hit OK and now there appears to be no OS on the Boot Manager.

When I put the bootable USB back in, the boot manager finds it but when I select it I receive: Failed to open \EFI\BOOT\mmx64.efi - Not Found Failed to load image (blank square): Not Found Failed to start MokManager: Not Found Something has gone seriously wrong: import_mok_state() failed: Not Found

This is my first time attempting to install an operating system so I really am not sure what went wrong or where to go from here, any help would be greatly appreciated.

Edit: successful install! Thank you very much to everyone who took the time to help me out with this :)

0

SpaceX’s Starship nails a smooth return with historic catch

Al Jazeera SpaceX’s Starship nails a smooth return with historic catch www.aljazeera.com
preview

SpaceX Starship made a triumphant return to Earth, caught midair by giant mechanical ‘chopsticks’. Pretty crazy how they do it in mid-air instead of having it land on the ground.

SpaceX Starship made a triumphant return to Earth, caught midair by giant mechanical ‘chopsticks’. Pretty crazy how they do it in mid-air instead of having it land on the ground.

0

Starter Shop, day 5: a clearnet front door that doesn't expose the server, and a wallet that froze

preview

Five days into running an onion-only Monero download shop. Two things worth sharing since the last update, plus the numbers.

1. Giving an onion-only shop a clearnet page without linking it to the server

I tried to list the shop on Monerica and got rejected: the main link must be clearnet, and the proof that you accept Monero has to be on the site itself. Fair rule, but the whole point of the shop is that it has no public IP.

What I did instead:

  • A separate static page on a free static host, under its own pseudonymous account. It never touches the shop’s server, so the page can’t leak the server’s IP.
  • Plain HTML only: no JavaScript, no cookies, no analytics, no external requests (a strict CSP enforces it). It describes the product, shows a free preview of the guide and the onion address.
  • Links in both directions: the page shows the onion, and every page of the onion shop now links back to the clearnet page in its footer. That lets a visitor check that the two belong together, so a fake copy of either is easier to spot.
  • You can’t buy on the clearnet page. Checkout stays on the onion.

If you run an onion service and want to be findable: don’t put the clearnet page on the same server, and don’t reverse-proxy the onion to a clearnet domain. Either one ties the onion to a public IP.

Page: starter-xmr-shop.surge.sh

2. Wallet RPCs can freeze while their nodes are fine

On day 4, two of the three view-only wallets stopped answering for about half an hour, while their remote nodes answered normally the whole time. With only 1 of 3 wallets up, payment checking stalled for about 27 minutes (a payment would simply have waited; nothing is ever recorded without 2 agreeing wallets). One wallet came back on its own; the other stayed stuck until I restarted its monero-wallet-rpc.

Lessons:

  • Monitor the wallet RPC itself, not just the node behind it. A healthy node doesn’t mean a healthy wallet.
  • A wallet that hasn’t answered for, say, 10 minutes while its node is fine is a good candidate for an automatic restart. That, and the automatic node swap suggested here last time, are on my list but not built yet.

Numbers since the last update (~70 hours)

  • Failed payment checks (fewer than 2 of 3 wallets answering): three episodes: the freeze above (~27 minutes), a minute while the wallets were still starting after a server reboot, and one stray minute where Tor was slow for everything.
  • Since the stuck wallet was restarted ~36 hours ago: zero failed checks and zero wallet timeouts.

Unchanged

The guide plus full Go source and setup script, 0.052 XMR, XMR only. No accounts, no email, no JavaScript.

Shop (Tor Browser): 2puqu7h2c6nr447zun3t6kdanhaq2xaq5xybnge7ivx4nrfid…

Happy to answer questions about running a view-only, 2-of-3 setup over Tor.

Five days into running an onion-only Monero download shop. Two things worth sharing since the last update, plus the numbers.

1. Giving an onion-only shop a clearnet page without linking it to the server

I tried to list the shop on Monerica and got rejected: the main link must be clearnet, and the proof that you accept Monero has to be on the site itself. Fair rule, but the whole point of the shop is that it has no public IP.

What I did instead:

  • A separate static page on a free static host, under its own pseudonymous account. It never touches the shop’s server, so the page can’t leak the server’s IP.
  • Plain HTML only: no JavaScript, no cookies, no analytics, no external requests (a strict CSP enforces it). It describes the product, shows a free preview of the guide and the onion address.
  • Links in both directions: the page shows the onion, and every page of the onion shop now links back to the clearnet page in its footer. That lets a visitor check that the two belong together, so a fake copy of either is easier to spot.
  • You can’t buy on the clearnet page. Checkout stays on the onion.

If you run an onion service and want to be findable: don’t put the clearnet page on the same server, and don’t reverse-proxy the onion to a clearnet domain. Either one ties the onion to a public IP.

Page: starter-xmr-shop.surge.sh

2. Wallet RPCs can freeze while their nodes are fine

On day 4, two of the three view-only wallets stopped answering for about half an hour, while their remote nodes answered normally the whole time. With only 1 of 3 wallets up, payment checking stalled for about 27 minutes (a payment would simply have waited; nothing is ever recorded without 2 agreeing wallets). One wallet came back on its own; the other stayed stuck until I restarted its monero-wallet-rpc.

Lessons:

  • Monitor the wallet RPC itself, not just the node behind it. A healthy node doesn’t mean a healthy wallet.
  • A wallet that hasn’t answered for, say, 10 minutes while its node is fine is a good candidate for an automatic restart. That, and the automatic node swap suggested here last time, are on my list but not built yet.

Numbers since the last update (~70 hours)

  • Failed payment checks (fewer than 2 of 3 wallets answering): three episodes: the freeze above (~27 minutes), a minute while the wallets were still starting after a server reboot, and one stray minute where Tor was slow for everything.
  • Since the stuck wallet was restarted ~36 hours ago: zero failed checks and zero wallet timeouts.

Unchanged

The guide plus full Go source and setup script, 0.052 XMR, XMR only. No accounts, no email, no JavaScript.

Shop (Tor Browser): 2puqu7h2c6nr447zun3t6kdanhaq2xaq5xybnge7ivx4nrfid…

Happy to answer questions about running a view-only, 2-of-3 setup over Tor.

101

whining rule. [OC, brainmade]

digital drawing with two panels. first, someone is using a laptop with a trackpoint but the device is making fan whining noises like "weeeeee". the person using the laptop says "hey now. what did i say about whining?". in the second panel, the laptop calms down with its sound and the user pets the top right corner of the screen and circles the trackpoint a bit, saying "there you go". the laptop appears excited and a bit shaky. bottom right text says "by maria on lemmy"
preview

i felt like making this. so i did.

alt image

at first i left out the trackpoint bit. then i thought that someone in the comments would absolutely make a joke about it and so i put that in too. very funny.

i wish you a wonderful day in which you feel no need to whine ~

i felt like making this. so i did.

alt image

at first i left out the trackpoint bit. then i thought that someone in the comments would absolutely make a joke about it and so i put that in too. very funny.

i wish you a wonderful day in which you feel no need to whine ~

0

Scheifele makes history as Jets rally for wild shootout win

Scheifele makes history as Jets rally for wild shootout win | Winnipeg Jets www.nhl.com
preview

Another crazy come from well behind game!

It was also a historic afternoon for Mark Scheifele, who put together a four-point performance and made franchise history in two different categories. His 930th career point moved him past Dale Hawerchuk as the franchise’s all-time leading scorer, while his third assist of the afternoon gave him 554 for his career, moving him past Thomas Steen for the most assists in franchise history. Scheifele now stands alone atop both franchise leaderboards after a memorable afternoon in Chicago.

Most goals and most assists in franchise history with the milestone coming in the same game. That’s a pretty rare achievement!

Another crazy come from well behind game!

It was also a historic afternoon for Mark Scheifele, who put together a four-point performance and made franchise history in two different categories. His 930th career point moved him past Dale Hawerchuk as the franchise’s all-time leading scorer, while his third assist of the afternoon gave him 554 for his career, moving him past Thomas Steen for the most assists in franchise history. Scheifele now stands alone atop both franchise leaderboards after a memorable afternoon in Chicago.

Most goals and most assists in franchise history with the milestone coming in the same game. That’s a pretty rare achievement!

0

Voyager Has Proven ... We really do live in the Boonies

preview

In 1977 we launched Voyager 1. On November 18, 2026, it reaches one light-day from Earth, after 49 years of travel at about 61,000 km/h.

And it’s still nowhere.

Nearest star: Proxima Centauri, about 1,550 light-days away

Nearest big galaxy: Andromeda, about 2.5 million light-years away

Our fastest, farthest machine has barely left the driveway. We are a very long way from anything.

*My disclaimer: I calculated none of this. Everything here was gathered. Thought inspired by the article below. *

reuters.com/…/nasas-voyager-1-probe-poised-achiev…

In 1977 we launched Voyager 1. On November 18, 2026, it reaches one light-day from Earth, after 49 years of travel at about 61,000 km/h.

And it’s still nowhere.

Nearest star: Proxima Centauri, about 1,550 light-days away

Nearest big galaxy: Andromeda, about 2.5 million light-years away

Our fastest, farthest machine has barely left the driveway. We are a very long way from anything.

*My disclaimer: I calculated none of this. Everything here was gathered. Thought inspired by the article below. *

reuters.com/…/nasas-voyager-1-probe-poised-achiev…

0

Philo brings it

preview

I have to give it to him, with injuries right and left, Aaron Philo put the game on his back and pulled this thing out.

You can argue about him vs. Jones but this kid has heart and brought it out tonight. Damn fine performance

I have to give it to him, with injuries right and left, Aaron Philo put the game on his back and pulled this thing out.

You can argue about him vs. Jones but this kid has heart and brought it out tonight. Damn fine performance

0

A coordinate system for a tidally locked planet

preview

Without a natural magnetic field and with such a slow rotation rate, the “equator” is the grayline and the “poles” are the substellar point and its corresponding antipode.

Some related notes on vulpithecine mathematics: Angles don’t use degrees but duodecimal fractions of a full circle (tau). Historically, yinrih had no words for ‘north’ and ‘south’ but only ‘toward the equator’ and ‘away from the equator’. This is still the case in at least Commonthroat. Hearthsider, being the language spoken on the planet pictured, likely uses ‘sunward’ and such.

Travelers who get lost in the Nightless Desert surrounding the substellar point are told to measure the elevation of the sun, which will tell them their latitude. Alternatively, that their shadow points to the green belt surrounding the terminator. Practically though, your best bet if you get lost out there is to either look for one of the many monasteries dotted across the desert, or failing that, find and sever a long-haul data cable and wait for the repair crew.

Without a natural magnetic field and with such a slow rotation rate, the “equator” is the grayline and the “poles” are the substellar point and its corresponding antipode.

Some related notes on vulpithecine mathematics: Angles don’t use degrees but duodecimal fractions of a full circle (tau). Historically, yinrih had no words for ‘north’ and ‘south’ but only ‘toward the equator’ and ‘away from the equator’. This is still the case in at least Commonthroat. Hearthsider, being the language spoken on the planet pictured, likely uses ‘sunward’ and such.

Travelers who get lost in the Nightless Desert surrounding the substellar point are told to measure the elevation of the sun, which will tell them their latitude. Alternatively, that their shadow points to the green belt surrounding the terminator. Practically though, your best bet if you get lost out there is to either look for one of the many monasteries dotted across the desert, or failing that, find and sever a long-haul data cable and wait for the repair crew.

0

Burnout

preview

I finally arrived at the point where I can’t avoid burning out unless I seek professional help, and it made me realize that I spent all my life with very imperfect coping mechanisms. I feel like all this time, I prevented my emotional well-being and from falling apart by keeping it together with tie wraps and twine. It was sturdy enough to withstand most storms, but the wind has been too strong lately, and it’s all falling apart. Now, I’m afraid to crumble if I don’t seek help. Turns out I was only strong on account of how much tie wraps and twine I used, but you can’t last forever with only that, cobtrary to what I thought. Of you think my situation also applies to you, don’t hesitate to seek help. Don’t wait for when you’re to crack because it’s way easier to change how we cope when we’re younger rather than older. I just turned 45, and I somehow managed to get through life relatively intact, but the accumulated pressure eventually got to me, and it hit hard.

I finally arrived at the point where I can’t avoid burning out unless I seek professional help, and it made me realize that I spent all my life with very imperfect coping mechanisms. I feel like all this time, I prevented my emotional well-being and from falling apart by keeping it together with tie wraps and twine. It was sturdy enough to withstand most storms, but the wind has been too strong lately, and it’s all falling apart. Now, I’m afraid to crumble if I don’t seek help. Turns out I was only strong on account of how much tie wraps and twine I used, but you can’t last forever with only that, cobtrary to what I thought. Of you think my situation also applies to you, don’t hesitate to seek help. Don’t wait for when you’re to crack because it’s way easier to change how we cope when we’re younger rather than older. I just turned 45, and I somehow managed to get through life relatively intact, but the accumulated pressure eventually got to me, and it hit hard.

0

Any tips for obtaining flying pets?

preview

I’ve been able to tame some flying pets that occassionally land, but do you have any tips for taming creatures that fly somewhat low to the ground and never land?

I’ve been able to tame some flying pets that occassionally land, but do you have any tips for taming creatures that fly somewhat low to the ground and never land?

0

Had to go back to Android

preview

Back in February, I bought an FLX1s (new). It had its share of issues, but because I have the luxury of working around them, I’ve been using it as a daily driver. A couple of weeks ago, the USB port started going out[^1], and now the connector is so bad I’m lucky if I can jerry-rig positioning where it’ll charge. As it continues to slowly degrade (because every time I charge it, I stress the port a little more), I expect that before the end of the year I’ll own a very expensive brick.

I’ve spent the past week casting around for a new Linux phone, and any of you on the same journey will have experienced the same thing: every phone that is reported to have decent hardware support and works in the US is either no longer being sold new, or is eye-wateringly expensive ($1700) for mediocre hardware – and the best phones are only available in Europe.

In the end, I had to go back to Android for the time being, and chose a FairPhone 6+. It has decent specs and runs /e/os which at least is deGoogled. It’s not Linux, but nearly all the hardware is user-replaceable without soldering or special tools, so despite the fact that it also has no wireless charging, the USB-C port is easily replaced, so when it craps out it doesn’t brick the phone. I’m hoping I can still be using it by the time one of the mobile Linux distributions comes to it.

It’s a sad day for me: even though the software was far from polished, and even with all of the problems of FuriOS, I loved having Linux on the phone, and it’s going to be painful to go back to Android. I can only cross my fingers that it’ll only be for a couple of years.

Anyway, I know we love success stories, but whatever the state of mobile Linux, it’s frustratingly hard to acquire a new phone[^2] that’ll run Linux and work in the US.

[^1]: An inevitable consequence of the FLX1s supporting neither BlueTooth calls nor wireless charging, so I was having to plug and unplug cables several times a day to swap between the wired USBC headset and the power cable
[^2]: I’m not interested in buying a used phone which is even more likely to have the battery crap out so I can spend more money and risk fat-fingering the replacement; or have an already weakened USB port.

Back in February, I bought an FLX1s (new). It had its share of issues, but because I have the luxury of working around them, I’ve been using it as a daily driver. A couple of weeks ago, the USB port started going out[^1], and now the connector is so bad I’m lucky if I can jerry-rig positioning where it’ll charge. As it continues to slowly degrade (because every time I charge it, I stress the port a little more), I expect that before the end of the year I’ll own a very expensive brick.

I’ve spent the past week casting around for a new Linux phone, and any of you on the same journey will have experienced the same thing: every phone that is reported to have decent hardware support and works in the US is either no longer being sold new, or is eye-wateringly expensive ($1700) for mediocre hardware – and the best phones are only available in Europe.

In the end, I had to go back to Android for the time being, and chose a FairPhone 6+. It has decent specs and runs /e/os which at least is deGoogled. It’s not Linux, but nearly all the hardware is user-replaceable without soldering or special tools, so despite the fact that it also has no wireless charging, the USB-C port is easily replaced, so when it craps out it doesn’t brick the phone. I’m hoping I can still be using it by the time one of the mobile Linux distributions comes to it.

It’s a sad day for me: even though the software was far from polished, and even with all of the problems of FuriOS, I loved having Linux on the phone, and it’s going to be painful to go back to Android. I can only cross my fingers that it’ll only be for a couple of years.

Anyway, I know we love success stories, but whatever the state of mobile Linux, it’s frustratingly hard to acquire a new phone[^2] that’ll run Linux and work in the US.

[^1]: An inevitable consequence of the FLX1s supporting neither BlueTooth calls nor wireless charging, so I was having to plug and unplug cables several times a day to swap between the wired USBC headset and the power cable
[^2]: I’m not interested in buying a used phone which is even more likely to have the battery crap out so I can spend more money and risk fat-fingering the replacement; or have an already weakened USB port.

0

Tom waits / cookie monster mashup, God's Away On Buisness

play · youtube.com
YouTube Tom Waits/Cookie Monster mashup - God's Away On Business youtu.be
preview

Tom Waits sometimes sounds eerily like Cookie Monster. Not that I mind! Here’s Cookie Monster’s rendition of “God’s Away On Business”. Please check out the sequel “Hell Broke Luce” (won’t work on mobile, thanks to copyright issues!)

Tom Waits sometimes sounds eerily like Cookie Monster. Not that I mind! Here’s Cookie Monster’s rendition of “God’s Away On Business”. Please check out the sequel “Hell Broke Luce” (won’t work on mobile, thanks to copyright issues!)

0

how to diagnose if my problems are due to loose internal connections in the computer?

preview

My purely debian-family Linux Chromebook has been acting weird lately. I suspect that maybe when I replaced the internal battery a while ago, some of the connections inside might not have been put back properly because it was very difficult to reassemble. I was very careful but totally possible I made an error because I’m not too experienced with that. All the little ribbons and clips were so fiddly.

Is there a way to monitor for loose connections from the terminal? Some kind of log entries that would be clues? I just am looking for the basic info here, don’t feel anything is too obvious!

Problems I’m having are like pauses of unresponsiveness, and a lot of confusion about the power (battery vs ac, full vs empty, plugged vs unplugged). Bluetooth has become less reliable also. Generalized poltergeist type behavior.

Edit: I have confirmed a hardware problem. Pressing the keyboard and the bottom plate together around the power-in helps. So something is loose in there.

My purely debian-family Linux Chromebook has been acting weird lately. I suspect that maybe when I replaced the internal battery a while ago, some of the connections inside might not have been put back properly because it was very difficult to reassemble. I was very careful but totally possible I made an error because I’m not too experienced with that. All the little ribbons and clips were so fiddly.

Is there a way to monitor for loose connections from the terminal? Some kind of log entries that would be clues? I just am looking for the basic info here, don’t feel anything is too obvious!

Problems I’m having are like pauses of unresponsiveness, and a lot of confusion about the power (battery vs ac, full vs empty, plugged vs unplugged). Bluetooth has become less reliable also. Generalized poltergeist type behavior.

Edit: I have confirmed a hardware problem. Pressing the keyboard and the bottom plate together around the power-in helps. So something is loose in there.

0

Some back-of-the-envelope math regarding Mary Peltola in the Senate race in Alaska (she's going to win)

preview

As of the latest results:

  • Peltola (D): 49.94% (140,637)
  • Big Sullivan ®: 45.96% (129,424)
  • Heikes ®: 2.13% (6002)
  • Smol Sullivan (I): 1.65% (4652)
  • Write-in: 0.31% (872)

  • An estimated 97% of votes are in.
  • There are currently 281,587 votes counted.
  • Thus, a 97% vote count (if accurate) implies the total is about 290,296.
  • A difference of 8709 estimated outstanding votes.
  • And implying Peltola needs to reach 145,149 votes to obtain an outright majority.
  • Thus, Peltola needs about 4512 more votes, or only 51.8% of the remaining ballots, to reach said outright majority.

Keeping in mind that districts are of roughly equal population and that late-arriving votes are likely to disproportionately favor Peltola, the districts with >5% estimated outstanding votes are:

  • District 5 (85% reporting; Peltola 53%, Big Sullivan 43%)
  • District 2 (90% reporting; Peltola 59%, Big Sullivan 36%)
  • District 1 (91% reporting; Big Sullivan 49%, Peltola 46%)
  • District 18 (94% reporting; Peltola 59%, Big Sullivan 37%)

This is so over. I wouldn’t be surprised if a decision desk calls it tonight, and I’d be fairly surprised at this point if it goes to ranked-choice at all.

I’m not going to get into what would happen with ranked-choice on November 18, because the NYT already published this article on November 5 going into detail about why Sullivan was already unlikely to prevail with what we knew then. Without getting into specifics, I would call it “virtually impossible” at this point – if not even “mathematically impossible” presuming the 97% figure is accurate.


Edit: Notably, Decision Desk HQ has the same vote count but a more conservative reporting vote estimate of only 92% (with districts marked accordingly). This is plausibly even more generous to Peltola, because it would mean that she would need to win only 50.64% of the remaining vote for the outright majority.

As of the latest results:

  • Peltola (D): 49.94% (140,637)
  • Big Sullivan ®: 45.96% (129,424)
  • Heikes ®: 2.13% (6002)
  • Smol Sullivan (I): 1.65% (4652)
  • Write-in: 0.31% (872)

  • An estimated 97% of votes are in.
  • There are currently 281,587 votes counted.
  • Thus, a 97% vote count (if accurate) implies the total is about 290,296.
  • A difference of 8709 estimated outstanding votes.
  • And implying Peltola needs to reach 145,149 votes to obtain an outright majority.
  • Thus, Peltola needs about 4512 more votes, or only 51.8% of the remaining ballots, to reach said outright majority.

Keeping in mind that districts are of roughly equal population and that late-arriving votes are likely to disproportionately favor Peltola, the districts with >5% estimated outstanding votes are:

  • District 5 (85% reporting; Peltola 53%, Big Sullivan 43%)
  • District 2 (90% reporting; Peltola 59%, Big Sullivan 36%)
  • District 1 (91% reporting; Big Sullivan 49%, Peltola 46%)
  • District 18 (94% reporting; Peltola 59%, Big Sullivan 37%)

This is so over. I wouldn’t be surprised if a decision desk calls it tonight, and I’d be fairly surprised at this point if it goes to ranked-choice at all.

I’m not going to get into what would happen with ranked-choice on November 18, because the NYT already published this article on November 5 going into detail about why Sullivan was already unlikely to prevail with what we knew then. Without getting into specifics, I would call it “virtually impossible” at this point – if not even “mathematically impossible” presuming the 97% figure is accurate.


Edit: Notably, Decision Desk HQ has the same vote count but a more conservative reporting vote estimate of only 92% (with districts marked accordingly). This is plausibly even more generous to Peltola, because it would mean that she would need to win only 50.64% of the remaining vote for the outright majority.

0

The BIG List of Video Game Randomizers

The BIG List of Video Game Randomizers The BIG List of Video Game Randomizers randomizers.debigare.com
preview

Here’s a BIG list.

Randomizers are game modifications and utilities that randomly arranges original game data in a way that significantly increase their replayability. Their randomization are applied before or when starting a new game in order to effectively generate many different games to experience based off the originals. They are also designed to prevent new unwinnable states to the game, or at the very least make such issues extremely unlikely or have easily-applicable non-destructive workarounds.

We’re also looking for more contributors, It’s mostly as easy as reading peoples’ submissions and editing a text file. Let me know if you want to help!

Here’s a BIG list.

Randomizers are game modifications and utilities that randomly arranges original game data in a way that significantly increase their replayability. Their randomization are applied before or when starting a new game in order to effectively generate many different games to experience based off the originals. They are also designed to prevent new unwinnable states to the game, or at the very least make such issues extremely unlikely or have easily-applicable non-destructive workarounds.

We’re also looking for more contributors, It’s mostly as easy as reading peoples’ submissions and editing a text file. Let me know if you want to help!

0

The BIG List of Video Game Randomizers

The BIG List of Video Game Randomizers The BIG List of Video Game Randomizers randomizers.debigare.com
preview

Here’s a BIG list.

Randomizers are game modifications and utilities that randomly arranges original game data in a way that significantly increase their replayability. Their randomization are applied before or when starting a new game in order to effectively generate many different games to experience based off the originals. They are also designed to prevent new unwinnable states to the game, or at the very least make such issues extremely unlikely or have easily-applicable non-destructive workarounds.

We’re also looking for more contributors, It’s mostly as easy as reading peoples’ submissions and editing a text file. Let me know if you want to help!

Here’s a BIG list.

Randomizers are game modifications and utilities that randomly arranges original game data in a way that significantly increase their replayability. Their randomization are applied before or when starting a new game in order to effectively generate many different games to experience based off the originals. They are also designed to prevent new unwinnable states to the game, or at the very least make such issues extremely unlikely or have easily-applicable non-destructive workarounds.

We’re also looking for more contributors, It’s mostly as easy as reading peoples’ submissions and editing a text file. Let me know if you want to help!