Since these are pretty acidic beans, I’ve ground them relatively fine (1.6.0 on 1zpresso Q Air), which is a wee bit coarser than what I grind for moka pot (1.4-1.5). I use Hoffmann’s “better 1 cup V60 recipe”.
It tastes fine, I think, I still don’t have a good reference point for V60. Its just that it takes a good 3-4 minutes after the last pour for final drawdown to be complete.
Sorry for the external link, i wanted to include multiple images.
Since these are pretty acidic beans, I’ve ground them relatively fine (1.6.0 on 1zpresso Q Air), which is a wee bit coarser than what I grind for moka pot (1.4-1.5). I use Hoffmann’s “better 1 cup V60 recipe”.
It tastes fine, I think, I still don’t have a good reference point for V60. Its just that it takes a good 3-4 minutes after the last pour for final drawdown to be complete.
Sorry for the external link, i wanted to include multiple images.
My house is really small and quite awkwardly shaped. Downstairs is only about 60 square meters and upstairs I basically just have my bedroom as it’s not very practical space due to the low ceiling.
The obvious choice here would be to just have the couch on one wall and TV on the opposing one but that just feels like a waste of space for a house this small. The two doorways also heavily limit where I can place furniture. However the room is also not large enough to be turned into two rooms so I figured a semi-open partition like this could be a viable compromise and it would then also allow me to create a little office space for myself which I currently lack entirely.
The only other option I can come up with is to block the left doorway and move it to my kitchen instead (the right doorway leads there) so then I could move the TV set onto that wall and put the sofa where my desk is here.
I guess I’m just looking for any thoughts or suggestions. I don’t feel like I have much of an “artistic eye” so I find it quite difficult to figure out a coherent interior decoration. The building part is my speciality, not so much the design.
This picture is based on a SketchUp model that I did so it’s to scale and based mostly on existing furniture.
My house is really small and quite awkwardly shaped. Downstairs is only about 60 square meters and upstairs I basically just have my bedroom as it’s not very practical space due to the low ceiling.
The obvious choice here would be to just have the couch on one wall and TV on the opposing one but that just feels like a waste of space for a house this small. The two doorways also heavily limit where I can place furniture. However the room is also not large enough to be turned into two rooms so I figured a semi-open partition like this could be a viable compromise and it would then also allow me to create a little office space for myself which I currently lack entirely.
The only other option I can come up with is to block the left doorway and move it to my kitchen instead (the right doorway leads there) so then I could move the TV set onto that wall and put the sofa where my desk is here.
I guess I’m just looking for any thoughts or suggestions. I don’t feel like I have much of an “artistic eye” so I find it quite difficult to figure out a coherent interior decoration. The building part is my speciality, not so much the design.
This picture is based on a SketchUp model that I did so it’s to scale and based mostly on existing furniture.
for all you autistic people out there
for all you autistic people out there
Nvidia’s security chief quietly left in August, and now that CEO Jensen Huang has stepped down over his relationships, including one with an executive at a company suspected of funneling chips to China, a former intelligence officer says it’s the kind of leak that runs everyday conversations, which most corporate security teams are poorly equipped to catch.
Nvidia’s security chief quietly left in August, and now that CEO Jensen Huang has stepped down over his relationships, including one with an executive at a company suspected of funneling chips to China, a former intelligence officer says it’s the kind of leak that runs everyday conversations, which most corporate security teams are poorly equipped to catch.
Share your Shave of the Day for Sunday!
Share your Shave of the Day for Sunday!
Long post warning.
This was going to be a reply to an earlier thread, however as the question comes up from time to time in photography discussions, I figured having direct comparisons would be of benefit to the community. That other thread was talking about telephoto (birds/wildlife) so that’s the example I’m using.
First off, I’m not comparing convenience, and I’m in no way rubbishing mobile phone cameras. They are ridiculously good, particularly given their on-paper specs, and in many situations they’re the better option if for no other reason than that you have it with you. With the many tricks they employ, from taking multiple shots and layering them for noise reduction, to simulated bokeh, auto-applied sky optimisations etc the point-and-shoot results are incredible. For a spur of the moment pic of friends, an interesting thing you see on the way home from work, making a note of something you’ve seen at the shops, taking a look at that thing behind the cupboard you can’t quite get your eyes at the right angle to see - they are unbeatable. A lot of people are just after pics to look back fondly on, which they might post up on social media where they’ll be heavily compressed and only seen on small screens by people who don’t know or care what SLR stands for. For those people, pics from a phone camera do the job just fine.
But for this post we’re talking about outright quality of the resulting image, and in that regard it’s important to acknowledge that phone cameras do have their limitations. Beefy processors and incredibly smart software can only do so much to get around the physics of short focal lengths and tiny sensors. There are reasons that National Geographic and ESPN aren’t saving themselves a fortune and just issuing their photographers with a phone.
I am not a professional, I won’t even claim to be particularly good, but I hope this is of some value to someone. And if not it was a good way to kill a bit of time on a rainy day.
So with all that out of the way - I was bored and thought I’d take a couple of example pictures. The weather was crap, and the pics are by no means showcasing anything special, but I’m hoping they’re enough to help visualise the difference between two devices that can do broadly the same job, but with wildly different compromises.
First up, pics from the Samsung Galaxy S23 Ultra. Not top of the pile I’m sure, but it’s what I have, and I’m comparing it against a body released a year earlier so I reckon it’s fair enough, particularly given the S23U was a flagship at the time and its camera was a marketing point. Aside from zoom and resolution I left the settings alone as that’s what the vast majority of users will do, and I dare say the defaults would give the best results anyway.
At 200MP. EXIF says it was at 6mm, ISO 10, f/1.7, 1/583s, though with the software trickery I’m not sure how comparable those figures are. Zoom isn’t available in this mode, this is a 1:1 crop:

At 50MP. EXIF suggests the same settings as above except 1/580s. As with 200MP there’s no zoom in this mode, another 1:1 crop:

And in its regular 12MP pixel binning mode, which does allow zooming, at 10x (its max optical zoom IIRC). These next few are full uncropped images, resized down for posting:

12MP at 30x, heavily software-assisted:

12MP at 100x, its max magnification:

For comparison, standing in the exact same spot, I took the pics below within a minute of the above. Canon R7, 70-200 f/2.8 IS USM Z + 2x TC. 400mm, 1/800, f/6.3, ISO 500. Near-zero processing effort has gone into this, just the auto-applied optical corrections and colour profile in DxO Photolab, then denoise and cropping/resizing for posting. It took longer to export and rename the files than to edit. And before it’s mentioned, yes I’m aware that apparently the TC does affect image quality, though in my experience it’s minimal, and there aren’t too many ways to get 400 5.6 without spending a fortune and/or losing versatility. That said if anyone wants to buy me a 400 f/2.8 I’d happily reshoot the photos!
Anyway, as shot, just resized for posting, showing the framing at 400mm (+ crop factor giving 640mm FF equiv):

Tighter framing (via cropping):

And a 1:1 crop of the main subject. It was windy af and the power line in front was moving quite a lot:

There you have it.
I’m sure someone can pick holes in my method but IMHO the difference is obvious. And if you read all the way down to the end, I hereby award you a virtual fist bump.
(Edit: text formatting)
Long post warning.
This was going to be a reply to an earlier thread, however as the question comes up from time to time in photography discussions, I figured having direct comparisons would be of benefit to the community. That other thread was talking about telephoto (birds/wildlife) so that’s the example I’m using.
First off, I’m not comparing convenience, and I’m in no way rubbishing mobile phone cameras. They are ridiculously good, particularly given their on-paper specs, and in many situations they’re the better option if for no other reason than that you have it with you. With the many tricks they employ, from taking multiple shots and layering them for noise reduction, to simulated bokeh, auto-applied sky optimisations etc the point-and-shoot results are incredible. For a spur of the moment pic of friends, an interesting thing you see on the way home from work, making a note of something you’ve seen at the shops, taking a look at that thing behind the cupboard you can’t quite get your eyes at the right angle to see - they are unbeatable. A lot of people are just after pics to look back fondly on, which they might post up on social media where they’ll be heavily compressed and only seen on small screens by people who don’t know or care what SLR stands for. For those people, pics from a phone camera do the job just fine.
But for this post we’re talking about outright quality of the resulting image, and in that regard it’s important to acknowledge that phone cameras do have their limitations. Beefy processors and incredibly smart software can only do so much to get around the physics of short focal lengths and tiny sensors. There are reasons that National Geographic and ESPN aren’t saving themselves a fortune and just issuing their photographers with a phone.
I am not a professional, I won’t even claim to be particularly good, but I hope this is of some value to someone. And if not it was a good way to kill a bit of time on a rainy day.
So with all that out of the way - I was bored and thought I’d take a couple of example pictures. The weather was crap, and the pics are by no means showcasing anything special, but I’m hoping they’re enough to help visualise the difference between two devices that can do broadly the same job, but with wildly different compromises.
First up, pics from the Samsung Galaxy S23 Ultra. Not top of the pile I’m sure, but it’s what I have, and I’m comparing it against a body released a year earlier so I reckon it’s fair enough, particularly given the S23U was a flagship at the time and its camera was a marketing point. Aside from zoom and resolution I left the settings alone as that’s what the vast majority of users will do, and I dare say the defaults would give the best results anyway.
At 200MP. EXIF says it was at 6mm, ISO 10, f/1.7, 1/583s, though with the software trickery I’m not sure how comparable those figures are. Zoom isn’t available in this mode, this is a 1:1 crop:

At 50MP. EXIF suggests the same settings as above except 1/580s. As with 200MP there’s no zoom in this mode, another 1:1 crop:

And in its regular 12MP pixel binning mode, which does allow zooming, at 10x (its max optical zoom IIRC). These next few are full uncropped images, resized down for posting:

12MP at 30x, heavily software-assisted:

12MP at 100x, its max magnification:

For comparison, standing in the exact same spot, I took the pics below within a minute of the above. Canon R7, 70-200 f/2.8 IS USM Z + 2x TC. 400mm, 1/800, f/6.3, ISO 500. Near-zero processing effort has gone into this, just the auto-applied optical corrections and colour profile in DxO Photolab, then denoise and cropping/resizing for posting. It took longer to export and rename the files than to edit. And before it’s mentioned, yes I’m aware that apparently the TC does affect image quality, though in my experience it’s minimal, and there aren’t too many ways to get 400 5.6 without spending a fortune and/or losing versatility. That said if anyone wants to buy me a 400 f/2.8 I’d happily reshoot the photos!
Anyway, as shot, just resized for posting, showing the framing at 400mm (+ crop factor giving 640mm FF equiv):

Tighter framing (via cropping):

And a 1:1 crop of the main subject. It was windy af and the power line in front was moving quite a lot:

There you have it.
I’m sure someone can pick holes in my method but IMHO the difference is obvious. And if you read all the way down to the end, I hereby award you a virtual fist bump.
(Edit: text formatting)
J’ai beaucoup de misère à me sentir heureux depuis un bout. Me semble que le monde va câlicement mal.
Dès que tu portes quelque chose en support à la Palestine, tu te fais harceler dans la rue par des sionistes. On a un gouvernement municipal (Montréal), provincial et fédéral qui supporte ouvertement Israël sans aucune honte. On se fait gaslight à tour de bras sur ce sujet là. Je trouve ça écoeurant au plus haut degré.
On voit en France et ailleurs en Europe comment la population se fait agresser par la police impunément pour manifester contre le coût de la vie qui est rendu bien trop cher. C’est d’une violence inouïe. Et on voit que les policiers ont un malin plaisir à faire mal à la population et à enfreindre les lois pour le faire. Et ça commence à déborder jusqu’ici. On a vu ça en 2012 avec les manifs des carrés rouges. Eh ben ça recommence et je crois que la police d’ici va être inspirée par la police française. Préparez vous à avoir vos droits bafoués pendant que vous mangez des coups de matraques et que vous perdez vos dents, vos yeux et d’autre membres de votre corp.
Et on ne parlera même pas de l’environnement qu’on voit se transformer à vue d’oeil en accéléré et que tout le monde a l’air de s’en crisser. Et de l’AI qui est en train de tout foutre en l’air et menace toutes les jobs en informatique et tous les artistes. J’ai mis tant d’effort dans mon éducation pour me faire remplacer par un osti de AI con comme de la marde qui n’est pas capable de faire rien comme du monde, mais dont les patrons continuent à nous forcer à utiliser.
Et les gens en général sont rendus tellement villains, tellement irrespectueux, ingrats, effrontés. On dirait que les gens ne savent plus comment se comporter avec les autres. Le sens de la communauté est en train de se désagréger complètement.
Chu pu capable. Tout le monde entier m’écoeure. Je n’ai plus envie de continuer sur cette planète ni dans cette société.
J’ai beaucoup de misère à me sentir heureux depuis un bout. Me semble que le monde va câlicement mal.
Dès que tu portes quelque chose en support à la Palestine, tu te fais harceler dans la rue par des sionistes. On a un gouvernement municipal (Montréal), provincial et fédéral qui supporte ouvertement Israël sans aucune honte. On se fait gaslight à tour de bras sur ce sujet là. Je trouve ça écoeurant au plus haut degré.
On voit en France et ailleurs en Europe comment la population se fait agresser par la police impunément pour manifester contre le coût de la vie qui est rendu bien trop cher. C’est d’une violence inouïe. Et on voit que les policiers ont un malin plaisir à faire mal à la population et à enfreindre les lois pour le faire. Et ça commence à déborder jusqu’ici. On a vu ça en 2012 avec les manifs des carrés rouges. Eh ben ça recommence et je crois que la police d’ici va être inspirée par la police française. Préparez vous à avoir vos droits bafoués pendant que vous mangez des coups de matraques et que vous perdez vos dents, vos yeux et d’autre membres de votre corp.
Et on ne parlera même pas de l’environnement qu’on voit se transformer à vue d’oeil en accéléré et que tout le monde a l’air de s’en crisser. Et de l’AI qui est en train de tout foutre en l’air et menace toutes les jobs en informatique et tous les artistes. J’ai mis tant d’effort dans mon éducation pour me faire remplacer par un osti de AI con comme de la marde qui n’est pas capable de faire rien comme du monde, mais dont les patrons continuent à nous forcer à utiliser.
Et les gens en général sont rendus tellement villains, tellement irrespectueux, ingrats, effrontés. On dirait que les gens ne savent plus comment se comporter avec les autres. Le sens de la communauté est en train de se désagréger complètement.
Chu pu capable. Tout le monde entier m’écoeure. Je n’ai plus envie de continuer sur cette planète ni dans cette société.
A war correspondent who survived grenades in Ukraine, bombs in Beirut and being held at gunpoint in Libya - only to be hospitalised after slipping on spilt food at London’s trendy Borough Market - is suing for £1.6million compensation.
He crashed to the ground, sustaining a bad fracture of his ankle, which he says left him with ongoing pain and forced him to move to the UK from his Moscow base, which he says has impacted on his earning power.
The trustees, which run the market as a non-profit organisation, have admitted liability for the accident, but are set to contest the amount in damages Mr Chance is due.
A war correspondent who survived grenades in Ukraine, bombs in Beirut and being held at gunpoint in Libya - only to be hospitalised after slipping on spilt food at London’s trendy Borough Market - is suing for £1.6million compensation.
He crashed to the ground, sustaining a bad fracture of his ankle, which he says left him with ongoing pain and forced him to move to the UK from his Moscow base, which he says has impacted on his earning power.
The trustees, which run the market as a non-profit organisation, have admitted liability for the accident, but are set to contest the amount in damages Mr Chance is due.
A Isar–Marvinci, vicino a Valandovo, gli archeologi scoprono una monumentale piscina termale con rivestimento marmoreo, impermeabilizzazione e un impianto ad aria calda eccezionalmente
A Isar–Marvinci, vicino a Valandovo, gli archeologi scoprono una monumentale piscina termale con rivestimento marmoreo, impermeabilizzazione e un impianto ad aria calda eccezionalmente
On Instagram: www.instagram.com/p/DfsEh8FG61l/
Text:
J’appuie Pierre Céré dans Rosemont-La Petite-Patrie!
Des élections partielles sont en cours dans le quartier et je suis fier de soutenir la candidature de Pierre. Militant infatigable des droits des travailleurs et travailleuses, il saura maintenir la voix progressiste de Rosemont-La Petite-Patrie. Pierre a œuvré pendant des années pour les chômeurs et chômeuses mais également pour la défense de l’environnement, la santé publique et la solidarité internationale. Il a une compréhension profonde des enjeux et une vision ambitieuse en faveur de la justice sociale.
Dans un monde qui glisse de plus en plus à droite, où les enjeux climatiques sont écartés, nous avons besoin de voix fortes qui vont défendre nos valeurs et nos principes.
Pierre Céré porte cette voix et va maintenir Rosemont-La Petite-Patrie comme quartier progressiste et solidaire!
Je vous encourage donc à l’appuyer également et de l’élire le 7 décembre prochain!
On Instagram: www.instagram.com/p/DfsEh8FG61l/
Text:
J’appuie Pierre Céré dans Rosemont-La Petite-Patrie!
Des élections partielles sont en cours dans le quartier et je suis fier de soutenir la candidature de Pierre. Militant infatigable des droits des travailleurs et travailleuses, il saura maintenir la voix progressiste de Rosemont-La Petite-Patrie. Pierre a œuvré pendant des années pour les chômeurs et chômeuses mais également pour la défense de l’environnement, la santé publique et la solidarité internationale. Il a une compréhension profonde des enjeux et une vision ambitieuse en faveur de la justice sociale.
Dans un monde qui glisse de plus en plus à droite, où les enjeux climatiques sont écartés, nous avons besoin de voix fortes qui vont défendre nos valeurs et nos principes.
Pierre Céré porte cette voix et va maintenir Rosemont-La Petite-Patrie comme quartier progressiste et solidaire!
Je vous encourage donc à l’appuyer également et de l’élire le 7 décembre prochain!
edit: I decreased swappiness and increased vfs cache pressure to reduce the amount of swapping in general.
I’m noticing that a very intended behavior of Zswap is to write pages to disk when they don’t cleanly compress (or for some other reason). How can I configure it to act kind of like Zram but only writeback when the system is actually out of RAM?
grep -R . /sys/kernel/debug/zswap/ /sys/kernel/debug/zswap/stored_incompressible_pages:8224 /sys/kernel/debug/zswap/stored_pages:218538 /sys/kernel/debug/zswap/pool_total_size:229318656 /sys/kernel/debug/zswap/written_back_pages:251371 /sys/kernel/debug/zswap/decompress_fail:0 /sys/kernel/debug/zswap/reject_compress_poor:0 /sys/kernel/debug/zswap/reject_compress_fail:0 /sys/kernel/debug/zswap/reject_kmemcache_fail:0 /sys/kernel/debug/zswap/reject_alloc_fail:0 /sys/kernel/debug/zswap/reject_reclaim_fail:0 /sys/kernel/debug/zswap/pool_limit_hit:0
My parameters: zswap.enabled=1 zswap.compressor=zstd zswap.shrinker_enabled=0 zswap.max_pool_percent=20. Swappiness is at default value.
edit: I decreased swappiness and increased vfs cache pressure to reduce the amount of swapping in general.
I’m noticing that a very intended behavior of Zswap is to write pages to disk when they don’t cleanly compress (or for some other reason). How can I configure it to act kind of like Zram but only writeback when the system is actually out of RAM?
grep -R . /sys/kernel/debug/zswap/ /sys/kernel/debug/zswap/stored_incompressible_pages:8224 /sys/kernel/debug/zswap/stored_pages:218538 /sys/kernel/debug/zswap/pool_total_size:229318656 /sys/kernel/debug/zswap/written_back_pages:251371 /sys/kernel/debug/zswap/decompress_fail:0 /sys/kernel/debug/zswap/reject_compress_poor:0 /sys/kernel/debug/zswap/reject_compress_fail:0 /sys/kernel/debug/zswap/reject_kmemcache_fail:0 /sys/kernel/debug/zswap/reject_alloc_fail:0 /sys/kernel/debug/zswap/reject_reclaim_fail:0 /sys/kernel/debug/zswap/pool_limit_hit:0
My parameters: zswap.enabled=1 zswap.compressor=zstd zswap.shrinker_enabled=0 zswap.max_pool_percent=20. Swappiness is at default value.
Tsuihou Sareta Tensei Juukishi wa Game Chishiki de Musou Suru, episode 20
Juukishi, Kesatria Kelas Berat Tereinkarnasi yang Diasingkan Jadi Tanpa Tanding Dengan Pengetahuan Gimnya, The Exiled Reincarnated Heavy Knight Is Unrivaled in Game Knowledge, เกิดใหม่เป็นอัศวินเกราะหนักผู้ถูกขับไล่แต่ใช้ความรู้จากเกมจนไร้เทียมทาน
- Info - AniList - Info - Kitsu - Info - MyAnimeList - Info - Official Site (Japanese) - Social - Twitter (Japanese) - Streaming - Bilibili TV - Streaming - Crunchyroll - Streaming - YouTube - Streaming - iQ
Reminder: Please do not discuss plot points not yet seen or skipped in the show. Failing to follow the rules may result in a ban.
All discussions
| Episode | Link | Episode | Link |
|---|---|---|---|
| 1 | Link | 14 | Link |
| 2 | Link | 15 | Link |
| 3 | Link | 16 | Link |
| 4 | Link | 17 | Link |
| 5 | Link | 18 | Link |
| 6 | Link | 19 | Link |
| 7 | Link | 20 | Link |
| 8 | Link | 21 | Link |
| 9 | Link | ||
| 10 | Link | ||
| 11 | Link | ||
| 12 | Link | ||
| 13 | Link |
This post was created by a bot. Message the mod team for feedback and comments. The original source code can be found on GitHub.
Tsuihou Sareta Tensei Juukishi wa Game Chishiki de Musou Suru, episode 20
Juukishi, Kesatria Kelas Berat Tereinkarnasi yang Diasingkan Jadi Tanpa Tanding Dengan Pengetahuan Gimnya, The Exiled Reincarnated Heavy Knight Is Unrivaled in Game Knowledge, เกิดใหม่เป็นอัศวินเกราะหนักผู้ถูกขับไล่แต่ใช้ความรู้จากเกมจนไร้เทียมทาน
- Info - AniList - Info - Kitsu - Info - MyAnimeList - Info - Official Site (Japanese) - Social - Twitter (Japanese) - Streaming - Bilibili TV - Streaming - Crunchyroll - Streaming - YouTube - Streaming - iQ
Reminder: Please do not discuss plot points not yet seen or skipped in the show. Failing to follow the rules may result in a ban.
All discussions
| Episode | Link | Episode | Link |
|---|---|---|---|
| 1 | Link | 14 | Link |
| 2 | Link | 15 | Link |
| 3 | Link | 16 | Link |
| 4 | Link | 17 | Link |
| 5 | Link | 18 | Link |
| 6 | Link | 19 | Link |
| 7 | Link | 20 | Link |
| 8 | Link | 21 | Link |
| 9 | Link | ||
| 10 | Link | ||
| 11 | Link | ||
| 12 | Link | ||
| 13 | Link |
This post was created by a bot. Message the mod team for feedback and comments. The original source code can be found on GitHub.
Holy fuck! I can’t believe a thing like this happened! How did this happen in a civilized society in the current year? It’s unbelievable! There should be riots in the streets! I don’t know how we allowed this sort of thing to happen! Everyone involved should be fired, arrested, and sued! I’m gonna need a vacation to get over this! Holy fuck! We’ve learned nothing from the past! Unbelievable! An absolute disgrace!
Holy fuck! I can’t believe a thing like this happened! How did this happen in a civilized society in the current year? It’s unbelievable! There should be riots in the streets! I don’t know how we allowed this sort of thing to happen! Everyone involved should be fired, arrested, and sued! I’m gonna need a vacation to get over this! Holy fuck! We’ve learned nothing from the past! Unbelievable! An absolute disgrace!
pink floyd: “sheep” (original radio edit)
https://slowforward.net/2026/11/15/pink-floyd-sheep-original-radio-edit/
pink floyd: “sheep” (original radio edit)
https://slowforward.net/2026/11/15/pink-floyd-sheep-original-radio-edit/


cross-posted from: lemmy.ca/post/73868602
cross-posted from: lemmy.ca/post/73868602
Artist: Childe Hassam
Year: 1913
Medium: Oil on canvas
Hassam spent many summers on Appledore Island off the coast of Maine. Every year, he and a circle of musicians, writers and other artists made an informal colony based at the home of his friend, the poet Celia Thaxter. In Thaxter’s gardens and on the rocky beaches, Hassam used the flickering brushwork and brilliant colors he had adopted in France to capture the spangled light of Appledore’s brief summer. This painting evokes the leisurely, seasonal rhythms of America’s priveleged families in the last years before the Great War. A beautifully dressed woman shields her face from the sun; she looks down and away, as if absorbed in the song of a sandpiper, the island bird that inspired Celia Thaxter’s most famous children’s poem.
Artist: Childe Hassam
Year: 1913
Medium: Oil on canvas
Hassam spent many summers on Appledore Island off the coast of Maine. Every year, he and a circle of musicians, writers and other artists made an informal colony based at the home of his friend, the poet Celia Thaxter. In Thaxter’s gardens and on the rocky beaches, Hassam used the flickering brushwork and brilliant colors he had adopted in France to capture the spangled light of Appledore’s brief summer. This painting evokes the leisurely, seasonal rhythms of America’s priveleged families in the last years before the Great War. A beautifully dressed woman shields her face from the sun; she looks down and away, as if absorbed in the song of a sandpiper, the island bird that inspired Celia Thaxter’s most famous children’s poem.
cross-posted from: lemmy.world/post/54392985
KDE is hiring a developer with a focus for Plasma Mobile!
I figure this could also be a place for discussing what are some things you’d like to see in Plasma Mobile? Frankly, hoping to organize ideas to formulate possible work items or goals to suggest to KDE.
cross-posted from: lemmy.world/post/54392985
KDE is hiring a developer with a focus for Plasma Mobile!
I figure this could also be a place for discussing what are some things you’d like to see in Plasma Mobile? Frankly, hoping to organize ideas to formulate possible work items or goals to suggest to KDE.
Things between the Liga MX and MLS sides escalated incredibly quickly
Things between the Liga MX and MLS sides escalated incredibly quickly
Centerback will miss Wild Card game and one more after that.
Centerback will miss Wild Card game and one more after that.
Clara Luvanga scored the winner as Washington Spirit beat Utah Royals 2-1 to reach a third straight NWSL final, which they will host at Audi Field
Clara Luvanga scored the winner as Washington Spirit beat Utah Royals 2-1 to reach a third straight NWSL final, which they will host at Audi Field
There is a link in the article to the full stream
There is a link in the article to the full stream
On Friday, I was told to sit down for a phone call from my boss, and he proceeded to tell me that someone reported that I said “KILL EM ALL!” while working, and interpreted that as a threat on the workplace.
I don’t know what he thought he heard, but I never said that. So I’m guessing he misheard something I said to myself.
Anyway he told the head of security.
I’ve been suspended from work, my work ID’s been confiscated, and I’ve been told they’ll wait for an investigation to end before deciding if I’m fired or re-assigned to a different building.
Someone will call me on monday for questioning.
So I’ve never done this before. How likely is it that I’m fired?
And worse still, what are the chances that they’ll end up pressing charges for “making death threats”? I’m trans in a state that doesn’t let you take hormones while in jail (Really bad considering I’m post-op and need hormones to not be menopausal) I REALLY don’t wanna go to jail and get V-Coded.
On Friday, I was told to sit down for a phone call from my boss, and he proceeded to tell me that someone reported that I said “KILL EM ALL!” while working, and interpreted that as a threat on the workplace.
I don’t know what he thought he heard, but I never said that. So I’m guessing he misheard something I said to myself.
Anyway he told the head of security.
I’ve been suspended from work, my work ID’s been confiscated, and I’ve been told they’ll wait for an investigation to end before deciding if I’m fired or re-assigned to a different building.
Someone will call me on monday for questioning.
So I’ve never done this before. How likely is it that I’m fired?
And worse still, what are the chances that they’ll end up pressing charges for “making death threats”? I’m trans in a state that doesn’t let you take hormones while in jail (Really bad considering I’m post-op and need hormones to not be menopausal) I REALLY don’t wanna go to jail and get V-Coded.
Après près de deux mois d’enquête, Cyberattaque.org a obtenu la confirmation officielle du vol des données personnelles de 22 millions de personnes chez Maileva, une marque de Docaposte, filiale du groupe La Poste faisant ainsi de cette fuite l’une des plus importante fuite de données en France. Noms, prénoms et adresses postales ont été dérobés.
Après près de deux mois d’enquête, Cyberattaque.org a obtenu la confirmation officielle du vol des données personnelles de 22 millions de personnes chez Maileva, une marque de Docaposte, filiale du groupe La Poste faisant ainsi de cette fuite l’une des plus importante fuite de données en France. Noms, prénoms et adresses postales ont été dérobés.
Undercover cameras paint a bleak portrait of the situation. Plus, it’s sea lion v black neck swan in Blue Planet III. Here’s what to watch this evening
10pm, ITV1
Undercover cameras paint a bleak portrait of the situation. Plus, it’s sea lion v black neck swan in Blue Planet III. Here’s what to watch this evening
10pm, ITV1
cross-posted from: ani.social/post/39478958
[Slow Start]
cross-posted from: ani.social/post/39478958
[Slow Start]
next page tomorrow
full comic: kamiokan.de/entropysrotoscope/issue2
all issues: kamiokan.de/entropysrotoscope
RSS: kamiokan.de/entropysrotoscope/rss.xml
draw me something if you like this.
CC0 / Public Domain
if you have ever donated me money, you can have your nick/name on the last page of printed version of thiss, just send me an email (er2 <at> kamiokan <dot> de) with nick you want to be printed and info how did you donate (i won’t be checking that, just don’t lie ok.)
next page tomorrow
full comic: kamiokan.de/entropysrotoscope/issue2
all issues: kamiokan.de/entropysrotoscope
RSS: kamiokan.de/entropysrotoscope/rss.xml
draw me something if you like this.
CC0 / Public Domain
if you have ever donated me money, you can have your nick/name on the last page of printed version of thiss, just send me an email (er2 <at> kamiokan <dot> de) with nick you want to be printed and info how did you donate (i won’t be checking that, just don’t lie ok.)
still havent heard a bad sleepy brown chorus
playlist link:
still havent heard a bad sleepy brown chorus
playlist link:
I picked up this 767GX at a local fest with the 2m and 6m modules. 80 USD.
This is my first non-HT radio, so I’m very much in the learn-by-putting-my-fingers-in-the-mains-socket mode.
I have some soldering experience and recapped a few hi-fi recievers, so I’m only hugely intimidated by this puzzlebox of cable bundles and dense parts rather than paralyzed intimidated. The closest hi-fi analog I have is a ~1972 Kenwood KR-6200 with tiny PCBs and loose cables.
So far, experimenting with scrap wire off the main HF socket in RX mode (need to wire up a compatible mic and get some adapters to try appropriate antennae before transmitting), I’ve determined the following:
It tunes and emits audio. It’s the world’s most absurd way to pick up 620kHz AM.
My office equipment is a RF noise nightmare.
The battery memory is shot. CR2032 holders are on order already. Annoying that without memory, it defaults to 7MHz exactly, which is Extra-only.
It mechanically clatters and rattles like Dad’s old Toyota. People mentioned lubing the fan but not how to safely dismantle it TO lube it.
The encoder is shot, it just shakes the last digit erratically. Apparently common for the type. I don’t know how to dismantle the unit futher than this to jab at it. A few buttons (tune up, band down) were initially unresponsive but worked open. The knobs are a bit scratchy-- I’d try Deoxiting it but it seems to be improving through rework, and opening the front panel once was enough. :p
But here’s a zesty one: there’s a cable harness that’s unplugged inside the unit. It’s ziptied to one of the four big wires on the PCB that provides connectors for the 2m/6m/70cm modules. The cables look to short to reach much nearby, and I don’t see matching sockets nearby. It appears to be a 2-pin (brown, red) and 6-pin (two blank, orange, yellow, grey heatshrinked, white)
Does this support another option or has someone been monkeying around with it? It seemed one or two screws short when I started to follow the disassembly manual.
I picked up this 767GX at a local fest with the 2m and 6m modules. 80 USD.
This is my first non-HT radio, so I’m very much in the learn-by-putting-my-fingers-in-the-mains-socket mode.
I have some soldering experience and recapped a few hi-fi recievers, so I’m only hugely intimidated by this puzzlebox of cable bundles and dense parts rather than paralyzed intimidated. The closest hi-fi analog I have is a ~1972 Kenwood KR-6200 with tiny PCBs and loose cables.
So far, experimenting with scrap wire off the main HF socket in RX mode (need to wire up a compatible mic and get some adapters to try appropriate antennae before transmitting), I’ve determined the following:
It tunes and emits audio. It’s the world’s most absurd way to pick up 620kHz AM.
My office equipment is a RF noise nightmare.
The battery memory is shot. CR2032 holders are on order already. Annoying that without memory, it defaults to 7MHz exactly, which is Extra-only.
It mechanically clatters and rattles like Dad’s old Toyota. People mentioned lubing the fan but not how to safely dismantle it TO lube it.
The encoder is shot, it just shakes the last digit erratically. Apparently common for the type. I don’t know how to dismantle the unit futher than this to jab at it. A few buttons (tune up, band down) were initially unresponsive but worked open. The knobs are a bit scratchy-- I’d try Deoxiting it but it seems to be improving through rework, and opening the front panel once was enough. :p
But here’s a zesty one: there’s a cable harness that’s unplugged inside the unit. It’s ziptied to one of the four big wires on the PCB that provides connectors for the 2m/6m/70cm modules. The cables look to short to reach much nearby, and I don’t see matching sockets nearby. It appears to be a 2-pin (brown, red) and 6-pin (two blank, orange, yellow, grey heatshrinked, white)
Does this support another option or has someone been monkeying around with it? It seemed one or two screws short when I started to follow the disassembly manual.
cross-posted from: lemmy.ca/post/73673850
FYI the abandoned text editor, markdown editor and overall tool Atom had an open source fork called Pulsar that is on Flathub which is what Steam OS uses for the Discover “app store”. Pulsar is also supported on Mac and Windows as well as the below package managers pulsar-edit.dev/download/#latest-version -AUR -GURU -Homebrew -FlatPak -Nixpkgs -AM/AppMan -Pacstall
flathub.org/en/apps/dev.pulsar_edit.Pulsar
docs.pulsar-edit.dev/using-pulsar/
docs.pulsar-edit.dev/using-pulsar/packages/
Check it out!
docs.pulsar-edit.dev/…/what-is-pulsar/#title
packages.pulsar-edit.dev/packages
Back in 2014, GitHub launched a cross-platform, free, and open-source text editor called Atom. To accomplish the tall task of supporting several operating systems from a single codebase, the Atom developers created an application framework that joined the Chromium browser engine onto Node.js. At the time, they called it Atom Shell.
Over time, the functionality of Atom Shell would expand, eventually becoming its own project called Electron. Electron would surpass Atom itself in popularity, becoming the platform of choice for software like GitHub Desktop, Visual Studio Code, Discord, and Slack.
Atom’s momentum slowed somewhat in 2018 when GitHub was purchased by Microsoft. Releases continued, but no new major features followed, and the editor entered a long twilight period before its official sunset at the end of 2022.
Atom’s official sunset day was the same day as the first beta release of Pulsar. The Pulsar core team largely consisted of former contributors to the atom-community organization. The team grew a new community and attracted new maintainers in order to turn Pulsar into the editor it is today: a successor to Atom that shares its philosophy of being a community-led, hyper-hackable text editor.
Atom was a really nice tool that was abandoned, and it is pretty damn cool to be able to get it on a Steam Device so easy!
cross-posted from: lemmy.ca/post/73673850
FYI the abandoned text editor, markdown editor and overall tool Atom had an open source fork called Pulsar that is on Flathub which is what Steam OS uses for the Discover “app store”. Pulsar is also supported on Mac and Windows as well as the below package managers pulsar-edit.dev/download/#latest-version -AUR -GURU -Homebrew -FlatPak -Nixpkgs -AM/AppMan -Pacstall
flathub.org/en/apps/dev.pulsar_edit.Pulsar
docs.pulsar-edit.dev/using-pulsar/
docs.pulsar-edit.dev/using-pulsar/packages/
Check it out!
docs.pulsar-edit.dev/…/what-is-pulsar/#title
packages.pulsar-edit.dev/packages
Back in 2014, GitHub launched a cross-platform, free, and open-source text editor called Atom. To accomplish the tall task of supporting several operating systems from a single codebase, the Atom developers created an application framework that joined the Chromium browser engine onto Node.js. At the time, they called it Atom Shell.
Over time, the functionality of Atom Shell would expand, eventually becoming its own project called Electron. Electron would surpass Atom itself in popularity, becoming the platform of choice for software like GitHub Desktop, Visual Studio Code, Discord, and Slack.
Atom’s momentum slowed somewhat in 2018 when GitHub was purchased by Microsoft. Releases continued, but no new major features followed, and the editor entered a long twilight period before its official sunset at the end of 2022.
Atom’s official sunset day was the same day as the first beta release of Pulsar. The Pulsar core team largely consisted of former contributors to the atom-community organization. The team grew a new community and attracted new maintainers in order to turn Pulsar into the editor it is today: a successor to Atom that shares its philosophy of being a community-led, hyper-hackable text editor.
Atom was a really nice tool that was abandoned, and it is pretty damn cool to be able to get it on a Steam Device so easy!
So 2 days ago I was getting back on my family desktop, but I noticed that Windows was slow, like VERY slow. I hear the hardware making decently loud noises all the time
No! You see, it’s a family desktop and it’s been there for 10+ years, which means if I install another operating system, 10 years of familiarity will be vanished! Even if I choose a distro with a Windows-like UI, the apps supported there aren’t garenteed to be recognized by my parents! Maybe they could tolerate Firefox and mayyyybe Ungoogled Chromium, but that’s about it
I told them I thought about it. My mom doesn’t use it for personal stuff at all and my dsd uses it for YouTube, word, excel, etc, so nothing too crazy. OnlyOffice (and LibreOffice from what I heard of) does support Microsoft’s file types. I asked them if they could toleratebthe alternative software. My dad said he would think about it. Currently, he said that we don’t have a USB with big enough storage space to fit all the data in to backup and restore on the new OS. But my parents are surprisngly open when it comes to my personal discsions. So, hope isn’t yet lost
It’s a gray area for now. Idk if my parents could tolerate Linux Mint, but if they could, that’s a massive win. If I could figure out how to dual-boot, then it’s a possible middle ground. Another possible middle ground is running Windows within Virtual Box for my parents. Best case scenario: The open-source alternatives are good enough for my parents’ use cases
So 2 days ago I was getting back on my family desktop, but I noticed that Windows was slow, like VERY slow. I hear the hardware making decently loud noises all the time
No! You see, it’s a family desktop and it’s been there for 10+ years, which means if I install another operating system, 10 years of familiarity will be vanished! Even if I choose a distro with a Windows-like UI, the apps supported there aren’t garenteed to be recognized by my parents! Maybe they could tolerate Firefox and mayyyybe Ungoogled Chromium, but that’s about it
I told them I thought about it. My mom doesn’t use it for personal stuff at all and my dsd uses it for YouTube, word, excel, etc, so nothing too crazy. OnlyOffice (and LibreOffice from what I heard of) does support Microsoft’s file types. I asked them if they could toleratebthe alternative software. My dad said he would think about it. Currently, he said that we don’t have a USB with big enough storage space to fit all the data in to backup and restore on the new OS. But my parents are surprisngly open when it comes to my personal discsions. So, hope isn’t yet lost
It’s a gray area for now. Idk if my parents could tolerate Linux Mint, but if they could, that’s a massive win. If I could figure out how to dual-boot, then it’s a possible middle ground. Another possible middle ground is running Windows within Virtual Box for my parents. Best case scenario: The open-source alternatives are good enough for my parents’ use cases
Credit: u/FutureMartian97
Credit: u/FutureMartian97
Credit: u/Jwalker221b
Credit: u/Jwalker221b