preview
Well, it’s finally happened. At long last I’ve devolved or, perhaps, succumbed to making my contribution to the One True Purpose of the Internet.
You know. Cats.
What did you think I was going to suggest?

Verily, the CIVIVI Purr has a certain design philosophy. A multitude of variants are available, although alas none of them fully match the colorways of any of my household’s furry tripping hazards. Since you can’t have everything, I went with this grey and white number. In addition to the obvious, it doesn’t half look like a certain someone, doesn’t it? That certainly helped my decision.

Just look at him face. It’s got two front kickers for ears, the eyes are a pair of Torx screws, and it’s even complete with a tail made of accessory cord. The tail could even be unwound into a lanyard, but it’s just so twee as it is that I can’t bring myself to do it. And not least of which because then I’d have to learn how to tie it up like that again.
The CIVIVI Purr has precisely two buyers, to wit: Complete and utter dweebs like me, and men (universally men) who are hoping to get their girlfriends, wives, or sundry significant others into knives. Thus I suspect this is aiming to be a “friendly” pocketknife, and in addition to the cutesy aesthetic also offers simplified operation without any locks or latches and a much easier opening action than, say, your garden variety Swiss Army Knife.

It’s quite diminutive. By my measure it’s basically exactly 4-5/8" long open (117.5mm) and the blade is a mere 1-13/16" (46mm). Its footprint isn’t that much bigger than the obligatory Swiss Classic and while it doesn’t offer scissors or a nail file, it certainly does offer a lot more knife. The blade is only 0.098" thick or 2.5mm and is flat ground for much of its length. The edge just barely hangs down below the bottom of the handle so you can get all but the tiniest bit of it against a flat surface if you have to. The total weight is a mere yet suspiciously exact 1.5 ounces or 42.4 grams including the lanyard.
Two other things the Purr offers are real-deal scales with at least some modicum of grip texture and concession to ergonomics thanks to the scallops in the edges, and…

…An honest to goodness pocket clip, which is certainly a rarity with this kind of thing. It’s even reversible, slotting into a pair of channels on either side of the scales in a very Spyderco-esque fashion with a single central screw.
CIVIVI certainly could have phoned this entire thing in and probably gotten away with it. But they didn’t, somehow and this makes me highly suspicious. This kind of cutesy micro-knife is normally supposed to be a mere novelty, the kind of token stocking stuffer that doesn’t have to be undertaken seriously because nobody is intended to take it seriously in the first place. There it will languish at the bottom of her stationery drawer for all eternity, except in the case of the Purr it probably shouldn’t because it’s actually remarkably competent.

It’s even made of a real steel. Nitro-V is not too far away from 14C28N in the grand scheme of things and possesses far more toughness than this tiny little thing has any business needing. In any world where anybody more cynical than CIVIVI made this thing it’d surely be hewn out of some low-rent junk like 3cr or 420A or something. It’s positively baffling, but I’m not complaining.

It’s a slip joint folder. You won’t find a back lock or a liner lock, because there isn’t a lock at all. It does click positively into either of its positions with a pair of ball detents, though. Opening and closing it ought to be perfectly intuitive for just about anybody, and the lack of a liner lock removes the evergreen temptation to have your fingers between the blade and the handle while you struggle with closing it, neatly obviating that whole chestnut.
This also has the side effect of leaving the Purr with absolutely zero tactical appeal. I suggest that’s the entire point, really.

The blade’s got this vaguely triangular drop pointed profile with jimping all up and down the back of it. It’s got a nice satiny finish and is deceptively sharp out of the box. The Purr’s cutting ability is very good despite its diminutive size due to its blade geometry. Being thin in cross section and having a shape that’s snag-free on material passing by always makes a blade a good cutter.
Opening it feels slick, and you can use either of the ears to do so. I prefer the rearward one, personally. The detents are pretty strong but once you overcome them the blade flies open with a satisfying click. The only complaint I really have is that given that the thing is completely outwardly symmetrical it’s not exactly intuitive to figure out which side you ought to open it from. You can tell if you look at it hard but there’s not much indicator if you’re going by feel. Your best bet is to remember which way it goes relative to the clip.

The Purr also comes with a ludicrous array of feelies. You get a hugely superfluous fleece lined zipper pouch that’s about nine times larger than it needs to be, several bits of promotional bumf, a microfiber cleaning cloth, and I was pleased to discover that the knife shaped card in there is actually a sticker.
I know there are a select two or three of you, and you know who you are, who have been perched on the edge of your computer chairs for the last five minutes wondering when I’m finally going to get around to revealing just how the Purr works mechanically. Because charming though they may be, it’s obvious to anyone paying attention that neither of those cat’s-eye screws could possibly be where the pivot is.

And you’re right, they aren’t.
Popping the scales off requires nothing more than undoing those two plus the tail screw on whichever side, optionally dropping the clip off in the process as well. They’re all T8 Torx heads. The actual pivot screw is concealed beneath, right in the center.

This reveals the detent action, which obviously isn’t quite the traditional slip joint arrangement because the Purr hasn’t got any kind of backspacer. You’ll also notice that the detent balls are ceramic. Swanky.

What’s also ceramic are the Purr’s tiny ball bearings, which are a luxury that have absolutely no business being in here. And yet, here they are anyway. This goes some way towards explaining the pivot action. I’m down for it.

It turns out there’s a detent in both sides of the liners. The endstop is provided by a captive pin which is hidden in a channel in the blade.
It is at this juncture I must regretfully advise you that the above spread of parts is minus the Purr’s swanky machined tail spacer, into which the clip is screwed. This is because I completely forgot to transfer it from my parts tray to the photo booth.

By way of apology please accept this macro shot of the same, which I took upon discovery of my blunder when reassembling the knife. It is with a heavy heart that I tell you I could not, alas, be bothered to take it all apart again just to rearrange that photo.

Beets dubs, the inner faces of the scales also make a face at you. It’s either very surprised, or possibly a Sniffit.
The Inevitable Conclusion
Among the Purr’s pack-ins you also get what would normally be the perfunctory instructions leaflet that always comes with this sort of thing. Don’t use this as a screwdriver, don’t use it to pry the lid off of a coffin, don’t bury it in your front yard or stick it in your dishwasher or drop it in the ocean. You know how it is.

Well, no. I submit to you that in fact CIVIVI know exactly how it is. I have never in all my years seen a mere piece of instructional literature hit the nail on the head so squarely.
This is threatening to launch me on my usual rant about knives and their role in society, one that I’m sure I’ve inflicted upon all of you in this very space many times in the past. I would do so while swirling the brandy around in my glass and gesticulating pointedly with my pipe now and again, if I had either a brandy glass or a pipe.
The rarely spoken out loud but pervasive notion that you must be kind of a nut if you carry a knife on a daily basis is stupid. And anyone who thinks that way is stupid, too. You can tell them I said so.
Everyone should have a knife. It doesn’t have to be some kind of Tacticool Black Blade Serrated Taliban Skewer XRZ-9000. It really doesn’t — I think the Purr proves this perfectly. It’s time we as a society were less down on mankind’s second oldest tool. Cut the little knife a break. There is absolutely no need to freak out if someone shows up with a sub 2" cat shaped pocketknife at the office as if they’d just unlatched their briefcase over the conference room table and out thudded nine pounds of enriched plutonium.
Relax. It’ll be okay, trust me.
In fact, in every social circle I’ve traveled in it’s always amused me how the cycle so quickly and reliably progresses from, “I can’t believe you carry that thing around with you, what could you possibly need that for?” To, “Do you have your knife on you today?” And inevitably, “Hey, can I borrow your knife for a sec?”
The ideal end to that trail of conversation is, of course, “So, you’re the knife guy. What first knife do you think I should buy?”

Right now at this exact second, it feels like this one might be the right answer.
Well, it’s finally happened. At long last I’ve devolved or, perhaps, succumbed to making my contribution to the One True Purpose of the Internet.
You know. Cats.
What did you think I was going to suggest?

Verily, the CIVIVI Purr has a certain design philosophy. A multitude of variants are available, although alas none of them fully match the colorways of any of my household’s furry tripping hazards. Since you can’t have everything, I went with this grey and white number. In addition to the obvious, it doesn’t half look like a certain someone, doesn’t it? That certainly helped my decision.

Just look at him face. It’s got two front kickers for ears, the eyes are a pair of Torx screws, and it’s even complete with a tail made of accessory cord. The tail could even be unwound into a lanyard, but it’s just so twee as it is that I can’t bring myself to do it. And not least of which because then I’d have to learn how to tie it up like that again.
The CIVIVI Purr has precisely two buyers, to wit: Complete and utter dweebs like me, and men (universally men) who are hoping to get their girlfriends, wives, or sundry significant others into knives. Thus I suspect this is aiming to be a “friendly” pocketknife, and in addition to the cutesy aesthetic also offers simplified operation without any locks or latches and a much easier opening action than, say, your garden variety Swiss Army Knife.

It’s quite diminutive. By my measure it’s basically exactly 4-5/8" long open (117.5mm) and the blade is a mere 1-13/16" (46mm). Its footprint isn’t that much bigger than the obligatory Swiss Classic and while it doesn’t offer scissors or a nail file, it certainly does offer a lot more knife. The blade is only 0.098" thick or 2.5mm and is flat ground for much of its length. The edge just barely hangs down below the bottom of the handle so you can get all but the tiniest bit of it against a flat surface if you have to. The total weight is a mere yet suspiciously exact 1.5 ounces or 42.4 grams including the lanyard.
Two other things the Purr offers are real-deal scales with at least some modicum of grip texture and concession to ergonomics thanks to the scallops in the edges, and…

…An honest to goodness pocket clip, which is certainly a rarity with this kind of thing. It’s even reversible, slotting into a pair of channels on either side of the scales in a very Spyderco-esque fashion with a single central screw.
CIVIVI certainly could have phoned this entire thing in and probably gotten away with it. But they didn’t, somehow and this makes me highly suspicious. This kind of cutesy micro-knife is normally supposed to be a mere novelty, the kind of token stocking stuffer that doesn’t have to be undertaken seriously because nobody is intended to take it seriously in the first place. There it will languish at the bottom of her stationery drawer for all eternity, except in the case of the Purr it probably shouldn’t because it’s actually remarkably competent.

It’s even made of a real steel. Nitro-V is not too far away from 14C28N in the grand scheme of things and possesses far more toughness than this tiny little thing has any business needing. In any world where anybody more cynical than CIVIVI made this thing it’d surely be hewn out of some low-rent junk like 3cr or 420A or something. It’s positively baffling, but I’m not complaining.

It’s a slip joint folder. You won’t find a back lock or a liner lock, because there isn’t a lock at all. It does click positively into either of its positions with a pair of ball detents, though. Opening and closing it ought to be perfectly intuitive for just about anybody, and the lack of a liner lock removes the evergreen temptation to have your fingers between the blade and the handle while you struggle with closing it, neatly obviating that whole chestnut.
This also has the side effect of leaving the Purr with absolutely zero tactical appeal. I suggest that’s the entire point, really.

The blade’s got this vaguely triangular drop pointed profile with jimping all up and down the back of it. It’s got a nice satiny finish and is deceptively sharp out of the box. The Purr’s cutting ability is very good despite its diminutive size due to its blade geometry. Being thin in cross section and having a shape that’s snag-free on material passing by always makes a blade a good cutter.
Opening it feels slick, and you can use either of the ears to do so. I prefer the rearward one, personally. The detents are pretty strong but once you overcome them the blade flies open with a satisfying click. The only complaint I really have is that given that the thing is completely outwardly symmetrical it’s not exactly intuitive to figure out which side you ought to open it from. You can tell if you look at it hard but there’s not much indicator if you’re going by feel. Your best bet is to remember which way it goes relative to the clip.

The Purr also comes with a ludicrous array of feelies. You get a hugely superfluous fleece lined zipper pouch that’s about nine times larger than it needs to be, several bits of promotional bumf, a microfiber cleaning cloth, and I was pleased to discover that the knife shaped card in there is actually a sticker.
I know there are a select two or three of you, and you know who you are, who have been perched on the edge of your computer chairs for the last five minutes wondering when I’m finally going to get around to revealing just how the Purr works mechanically. Because charming though they may be, it’s obvious to anyone paying attention that neither of those cat’s-eye screws could possibly be where the pivot is.

And you’re right, they aren’t.
Popping the scales off requires nothing more than undoing those two plus the tail screw on whichever side, optionally dropping the clip off in the process as well. They’re all T8 Torx heads. The actual pivot screw is concealed beneath, right in the center.

This reveals the detent action, which obviously isn’t quite the traditional slip joint arrangement because the Purr hasn’t got any kind of backspacer. You’ll also notice that the detent balls are ceramic. Swanky.

What’s also ceramic are the Purr’s tiny ball bearings, which are a luxury that have absolutely no business being in here. And yet, here they are anyway. This goes some way towards explaining the pivot action. I’m down for it.

It turns out there’s a detent in both sides of the liners. The endstop is provided by a captive pin which is hidden in a channel in the blade.
It is at this juncture I must regretfully advise you that the above spread of parts is minus the Purr’s swanky machined tail spacer, into which the clip is screwed. This is because I completely forgot to transfer it from my parts tray to the photo booth.

By way of apology please accept this macro shot of the same, which I took upon discovery of my blunder when reassembling the knife. It is with a heavy heart that I tell you I could not, alas, be bothered to take it all apart again just to rearrange that photo.

Beets dubs, the inner faces of the scales also make a face at you. It’s either very surprised, or possibly a Sniffit.
The Inevitable Conclusion
Among the Purr’s pack-ins you also get what would normally be the perfunctory instructions leaflet that always comes with this sort of thing. Don’t use this as a screwdriver, don’t use it to pry the lid off of a coffin, don’t bury it in your front yard or stick it in your dishwasher or drop it in the ocean. You know how it is.

Well, no. I submit to you that in fact CIVIVI know exactly how it is. I have never in all my years seen a mere piece of instructional literature hit the nail on the head so squarely.
This is threatening to launch me on my usual rant about knives and their role in society, one that I’m sure I’ve inflicted upon all of you in this very space many times in the past. I would do so while swirling the brandy around in my glass and gesticulating pointedly with my pipe now and again, if I had either a brandy glass or a pipe.
The rarely spoken out loud but pervasive notion that you must be kind of a nut if you carry a knife on a daily basis is stupid. And anyone who thinks that way is stupid, too. You can tell them I said so.
Everyone should have a knife. It doesn’t have to be some kind of Tacticool Black Blade Serrated Taliban Skewer XRZ-9000. It really doesn’t — I think the Purr proves this perfectly. It’s time we as a society were less down on mankind’s second oldest tool. Cut the little knife a break. There is absolutely no need to freak out if someone shows up with a sub 2" cat shaped pocketknife at the office as if they’d just unlatched their briefcase over the conference room table and out thudded nine pounds of enriched plutonium.
Relax. It’ll be okay, trust me.
In fact, in every social circle I’ve traveled in it’s always amused me how the cycle so quickly and reliably progresses from, “I can’t believe you carry that thing around with you, what could you possibly need that for?” To, “Do you have your knife on you today?” And inevitably, “Hey, can I borrow your knife for a sec?”
The ideal end to that trail of conversation is, of course, “So, you’re the knife guy. What first knife do you think I should buy?”

Right now at this exact second, it feels like this one might be the right answer.
preview
cross-posted from: piefed.ca/…/when-you-type-peifed-ca-instead-of-pi…
My first time making that typo: peifed.ca
cross-posted from: piefed.ca/…/when-you-type-peifed-ca-instead-of-pi…
My first time making that typo: peifed.ca
preview
preview
I came across this website. I’m on the other side of the country, and so I can’t check out the store in person, but the video they have on the site makes it look pretty cool.
Representing exclusively Canadian artists, artisans, and small businesses.
Alongside a handful of our own Spruce Moose Original products, we feature work from more than 50 talented Canadian artists & artisans, including exclusive Spruce Moose collaborations!
Apparel, accessories, home décor, greeting cards, & gifts by Canadian artists
Beautiful, quality, unique, & functional goods by Canadian artists, priced accessibly!
Location:
Find us every Sat 8-3 & Sun 10-2 at The Market at Western Fair District
You can see their list of artists here: smoose.ca/pages/artists
Their other initiatives: smoose.ca/pages/initiatives
I came across this website. I’m on the other side of the country, and so I can’t check out the store in person, but the video they have on the site makes it look pretty cool.
Representing exclusively Canadian artists, artisans, and small businesses.
Alongside a handful of our own Spruce Moose Original products, we feature work from more than 50 talented Canadian artists & artisans, including exclusive Spruce Moose collaborations!
Apparel, accessories, home décor, greeting cards, & gifts by Canadian artists
Beautiful, quality, unique, & functional goods by Canadian artists, priced accessibly!
Location:
Find us every Sat 8-3 & Sun 10-2 at The Market at Western Fair District
You can see their list of artists here: smoose.ca/pages/artists
Their other initiatives: smoose.ca/pages/initiatives
preview
Starlink Group 15-15 launch out of SLC-4E at Vandenberg Space Force Base in California is currently scheduled for 2026-10-23 22:48:44 UTC, or 2026-10-23 15:48:44 local time (PDT). Booster 1063-36 to land on Of Course I Still Love You.
Webcasts:
- Space Affairs: www.youtube.com/watch?v=zGZUw70ASg0 (scrub)
- Spaceflight Now: www.youtube.com/watch?v=hANSUkrKDwQ (scrub)
- International Rocket Launches: www.youtube.com/watch?v=ijVrwExARhc (scrub)
- NASASpaceflight: None
- The Launch Pad: None
- SpaceX: x.com/SpaceX/status/2113761872264712327 (scrub)
- The Space Devs: www.youtube.com/watch?v=cyJtopOtMZA
Starlink Group 15-15 launch out of SLC-4E at Vandenberg Space Force Base in California is currently scheduled for 2026-10-23 22:48:44 UTC, or 2026-10-23 15:48:44 local time (PDT). Booster 1063-36 to land on Of Course I Still Love You.
Webcasts:
- Space Affairs: www.youtube.com/watch?v=zGZUw70ASg0 (scrub)
- Spaceflight Now: www.youtube.com/watch?v=hANSUkrKDwQ (scrub)
- International Rocket Launches: www.youtube.com/watch?v=ijVrwExARhc (scrub)
- NASASpaceflight: None
- The Launch Pad: None
- SpaceX: x.com/SpaceX/status/2113761872264712327 (scrub)
- The Space Devs: www.youtube.com/watch?v=cyJtopOtMZA
preview
It’s an old meme, but EA operated very slowly here, so I hope it checks out
It’s an old meme, but EA operated very slowly here, so I hope it checks out
preview
Very very well, actually. Much easier than I thought. I got my hands on a phone that was suitable for LineageOS, installed it (smooth experience - so nice to be able to install your own OS, gives you the sensation to really own the phone, and not the other way around) and only installed degoogled apps. On the personal space there is no Google Play Services nor MicroG. Only apps that if I lose my phone and someone access it it wouldn’t be a problem. On the private space, the apps that have sensitive data or need Google Play Services (MicroG, actually)
So far, I hadn’t much problems. There is only one banking app that did not work (so I changed bank :D). There is an alternative for nearly anything you want. The one and only app that I miss is Maps, I’m using CoMaps, and although the navigation works fine and i like the feeling of it, it doesn’t have traffic info (which makes me lose so much time), takes you to a random number of the street you searched and you can’t find most stores and places only by the name. Anyway, I’m adapting, searching for the places somewhere else, leaving with spare time and trying to have a healthier life in which I’m not in a hurry.
My setup:
- Tuta Mail
- Proton Drive
- Signal
- Aurora Store
- F-Droid (included Izzy on Droid repo)
- FUTO Keyboard
- Vivaldi Browser
- CoMaps
- Kagi Search
- NewPipe (youtube)
- Tidal
- LibreOffice
- Summit (for Lemmy)
Hope it helps those who are considering taking the leap. Once you do it, it’s hard to imagine going back and being monitored 24/7 by the big tech companies
Very very well, actually. Much easier than I thought. I got my hands on a phone that was suitable for LineageOS, installed it (smooth experience - so nice to be able to install your own OS, gives you the sensation to really own the phone, and not the other way around) and only installed degoogled apps. On the personal space there is no Google Play Services nor MicroG. Only apps that if I lose my phone and someone access it it wouldn’t be a problem. On the private space, the apps that have sensitive data or need Google Play Services (MicroG, actually)
So far, I hadn’t much problems. There is only one banking app that did not work (so I changed bank :D). There is an alternative for nearly anything you want. The one and only app that I miss is Maps, I’m using CoMaps, and although the navigation works fine and i like the feeling of it, it doesn’t have traffic info (which makes me lose so much time), takes you to a random number of the street you searched and you can’t find most stores and places only by the name. Anyway, I’m adapting, searching for the places somewhere else, leaving with spare time and trying to have a healthier life in which I’m not in a hurry.
My setup:
- Tuta Mail
- Proton Drive
- Signal
- Aurora Store
- F-Droid (included Izzy on Droid repo)
- FUTO Keyboard
- Vivaldi Browser
- CoMaps
- Kagi Search
- NewPipe (youtube)
- Tidal
- LibreOffice
- Summit (for Lemmy)
Hope it helps those who are considering taking the leap. Once you do it, it’s hard to imagine going back and being monitored 24/7 by the big tech companies
preview
Extremely useful for games that only run in full screen. There are many tweaks you can apply to them, such as hooking XInput or mapping a X360 controller to specific keys, force screen size and several other things
Extremely useful for games that only run in full screen. There are many tweaks you can apply to them, such as hooking XInput or mapping a X360 controller to specific keys, force screen size and several other things
preview
preview
Signed up a couple of days ago, went to check it this morning, offline, and it’s been down all day. Did they close up shop?
Signed up a couple of days ago, went to check it this morning, offline, and it’s been down all day. Did they close up shop?
preview
“Our language is one of the biggest things that most First Nations across the country are losing,” said Wiikwemkoong Chief Tim Ominika. “We will have our knowledge keepers, our language speakers who may be moving on to the spirit world, but their legacy is still going to be protected for many years to come by having our own data systems in place and protecting that.”
The idea of digital sovereignty has gained momentum in places like Europe, where leaders are wary of the widespread influence of American Big Tech. For the Wiikwemkoong First Nation and other Indigenous communities, it is also about asserting authority over their own information after historically being excluded from its collection and use by colonizers.
“Our language is one of the biggest things that most First Nations across the country are losing,” said Wiikwemkoong Chief Tim Ominika. “We will have our knowledge keepers, our language speakers who may be moving on to the spirit world, but their legacy is still going to be protected for many years to come by having our own data systems in place and protecting that.”
The idea of digital sovereignty has gained momentum in places like Europe, where leaders are wary of the widespread influence of American Big Tech. For the Wiikwemkoong First Nation and other Indigenous communities, it is also about asserting authority over their own information after historically being excluded from its collection and use by colonizers.
preview
preview
Features
- Added a setting that marks crossposts as read when you read a post. Not yet compatible with mark read on scroll
- When crossposting, the included link now uses the community instance where possible, and your own instance otherwise
- You can now report private messages on PieFed
- The resizable sidebar on iPad can now get even smaller and larger
Bug Fixes
- Fixed the feed sometimes failing to load on PieFed
- Instance uptime has been disabled completely (for now), to prevent errors occurring. The service we were using for uptime has shut down.
- Fixed image uploading on Lemmy 1.0
- Fixed the “Saved” feed on Lemmy 1.0
- Fixed some glitchiness with the search sheet on iOS 27
- Fixed Lemmy links not opening in-app when an instance is not in the instance list
- Fixed the mod mail loading slowly when “unread only” is on
- Fixed connecting to a PieFed instance over LAN
- The “remove administrator” swipe action is now only displayed if you have not configured any user swipe actions
- Made performance improvements to account switching
Features
- Added a setting that marks crossposts as read when you read a post. Not yet compatible with mark read on scroll
- When crossposting, the included link now uses the community instance where possible, and your own instance otherwise
- You can now report private messages on PieFed
- The resizable sidebar on iPad can now get even smaller and larger
Bug Fixes
- Fixed the feed sometimes failing to load on PieFed
- Instance uptime has been disabled completely (for now), to prevent errors occurring. The service we were using for uptime has shut down.
- Fixed image uploading on Lemmy 1.0
- Fixed the “Saved” feed on Lemmy 1.0
- Fixed some glitchiness with the search sheet on iOS 27
- Fixed Lemmy links not opening in-app when an instance is not in the instance list
- Fixed the mod mail loading slowly when “unread only” is on
- Fixed connecting to a PieFed instance over LAN
- The “remove administrator” swipe action is now only displayed if you have not configured any user swipe actions
- Made performance improvements to account switching
preview
preview
I like lemon ginger or whatever its called, sometimes it has a “touch” of honey in the tea 🤷🏻
Also any time of the year Davids Tea earl grey Altho i kinda wanna get into english breakfast each morning to go with my famous breakfast sandwich
Robust af
I like lemon ginger or whatever its called, sometimes it has a “touch” of honey in the tea 🤷🏻
Also any time of the year Davids Tea earl grey Altho i kinda wanna get into english breakfast each morning to go with my famous breakfast sandwich
Robust af
preview
Gunter was born in October 1789 near present-day Guntersville, Alabama, the son of John Gunter, a white trader, and Catherine, a Cherokee woman. He died at his home northwest of Tahlequah on April 17, 1842, after a prolonged illness. He was only fifty-two years old and had lived in the new Cherokee Nation for just over three years. He was laid to rest in the family cemetery.
Heather Vanderzee traveled from Columbus, Ohio, to honor her fourth great-grandfather.
“He helped lead during a very painful turning point in the Cherokee Nation. I’m grateful for the opportunity to honor him today,” she said. “My great-grandmother was very proud of her Cherokee heritage, and she wrote lots of letters, so we always heard her stories, and I grew up reading them, and it caught on with my mother and I. It’s a passion of ours too.”
Gunter was born in October 1789 near present-day Guntersville, Alabama, the son of John Gunter, a white trader, and Catherine, a Cherokee woman. He died at his home northwest of Tahlequah on April 17, 1842, after a prolonged illness. He was only fifty-two years old and had lived in the new Cherokee Nation for just over three years. He was laid to rest in the family cemetery.
Heather Vanderzee traveled from Columbus, Ohio, to honor her fourth great-grandfather.
“He helped lead during a very painful turning point in the Cherokee Nation. I’m grateful for the opportunity to honor him today,” she said. “My great-grandmother was very proud of her Cherokee heritage, and she wrote lots of letters, so we always heard her stories, and I grew up reading them, and it caught on with my mother and I. It’s a passion of ours too.”
preview
Can Tracy convince black americans to vote Republican?
Can Tracy convince black americans to vote Republican?
preview
From the description:
When spooky season rolls around, I like to play spooky games. But what about spooky shmups? Undeadline Is here to strut its Halloween stuff.
From the description:
When spooky season rolls around, I like to play spooky games. But what about spooky shmups? Undeadline Is here to strut its Halloween stuff.
preview
“I have always tried to look at ways that the Cherokee Nation could bridge gaps, and this is something that I feel like not a lot of people talk about,” Glory said. “Period poverty is a very real thing that affects students and women alike. It’s something that we don’t talk about enough, and I also think that this will help students bring this into a conversation more.”
“I have always tried to look at ways that the Cherokee Nation could bridge gaps, and this is something that I feel like not a lot of people talk about,” Glory said. “Period poverty is a very real thing that affects students and women alike. It’s something that we don’t talk about enough, and I also think that this will help students bring this into a conversation more.”
preview
cross-posted from: news.abolish.capital/post/87571
Democratic US congressional candidate Brad Lander said Wednesday that he was released by Israeli forces with a “warning” after he and dozens of others were detained while helping Palestinians harvest olives in the illegally occupied West Bank.
“Several dozen rabbis and participants harvesting olives with me are still in detention,” Lander, who is Jewish, wrote on social media. “They should all be released immediately. To be clear: Palestinians face far worse consequences every day. These detentions by the IDF are one more attempt to undermine Palestinians’ right to harvest their olive groves, travel on their roads, and live in their homes.”
Prior to his release, Lander posted a video from a bus that he said was “taking us away for processing” after settler security called the Israel Defense Forces (IDF) on the group harvesting olives.
“Let’s be clear: Occupation is a crime under international law,” said Lander, who is running to represent New York’s 10th Congressional District in the US House of Representatives. “Harvesting olives is not a crime under any law.”
I’ve been released from IDF custody with a “warning,” apparently because of my public profile (I told them I wasn’t even a congressmember yet, just a nominee).But several dozen rabbis & participants harvesting olives with me are still in detention.
[image or embed]
— Brad Lander (@bradlander.bsky.social) 9:34 AM · Oct 21, 2026Lander was part of a group of around 80 American and Israeli rabbis and activists who were detained by the IDF on Wednesday as they helped Palestinians harvest olives from a grove near an Israeli settlement in the West Bank. Israeli lawyers told NPR that the incident marked “the largest mass detention of activists in the occupied West Bank in at least a decade.”
Jeremy Ben-Ami, president of the US-based advocacy group J Street, said in response to the detentions that “when the government of Israel and its military and law enforcement are arresting rabbis and volunteers who have journeyed 6000 miles to protect Palestinian farmers harvesting olives and not the violent terrorists harassing and attacking the farmers—it tells you all you need to know about this government’s moral compass.”
“This illegal and immoral occupation must end,” he added.
The mass detention came after several recent instances of horrific Israeli settler violence against Palestinian olive harvesters, European diplomats, and an American journalist.
Heba Morayef, Amnesty International’s regional director for the Middle East and North Africa, said in a statement earlier this week that “Israel’s apartheid system is turning the olive harvest into a season of horror for Palestinian families across the occupied West Bank.”
“States must recognize that settler attacks are not isolated acts, but a central policy of the Israeli state," said Morayef, calling on nations to “take concrete measures to respect their obligations under international law and to avoid complicity in Israeli violations and crimes against Palestinians by halting all trade, investment, and cooperation that contribute to maintaining the unlawful occupation, apartheid, and the ongoing campaign of ethnic cleansing.”
“Hiding behind empty rhetoric is not only cowardly, it is enabling further abuses,” she added. "For Palestinians, it continues to be deadly.”
From Common Dreams via This RSS Feed.
cross-posted from: news.abolish.capital/post/87571
Democratic US congressional candidate Brad Lander said Wednesday that he was released by Israeli forces with a “warning” after he and dozens of others were detained while helping Palestinians harvest olives in the illegally occupied West Bank.
“Several dozen rabbis and participants harvesting olives with me are still in detention,” Lander, who is Jewish, wrote on social media. “They should all be released immediately. To be clear: Palestinians face far worse consequences every day. These detentions by the IDF are one more attempt to undermine Palestinians’ right to harvest their olive groves, travel on their roads, and live in their homes.”
Prior to his release, Lander posted a video from a bus that he said was “taking us away for processing” after settler security called the Israel Defense Forces (IDF) on the group harvesting olives.
“Let’s be clear: Occupation is a crime under international law,” said Lander, who is running to represent New York’s 10th Congressional District in the US House of Representatives. “Harvesting olives is not a crime under any law.”
I’ve been released from IDF custody with a “warning,” apparently because of my public profile (I told them I wasn’t even a congressmember yet, just a nominee).But several dozen rabbis & participants harvesting olives with me are still in detention.
[image or embed]
— Brad Lander (@bradlander.bsky.social) 9:34 AM · Oct 21, 2026Lander was part of a group of around 80 American and Israeli rabbis and activists who were detained by the IDF on Wednesday as they helped Palestinians harvest olives from a grove near an Israeli settlement in the West Bank. Israeli lawyers told NPR that the incident marked “the largest mass detention of activists in the occupied West Bank in at least a decade.”
Jeremy Ben-Ami, president of the US-based advocacy group J Street, said in response to the detentions that “when the government of Israel and its military and law enforcement are arresting rabbis and volunteers who have journeyed 6000 miles to protect Palestinian farmers harvesting olives and not the violent terrorists harassing and attacking the farmers—it tells you all you need to know about this government’s moral compass.”
“This illegal and immoral occupation must end,” he added.
The mass detention came after several recent instances of horrific Israeli settler violence against Palestinian olive harvesters, European diplomats, and an American journalist.
Heba Morayef, Amnesty International’s regional director for the Middle East and North Africa, said in a statement earlier this week that “Israel’s apartheid system is turning the olive harvest into a season of horror for Palestinian families across the occupied West Bank.”
“States must recognize that settler attacks are not isolated acts, but a central policy of the Israeli state," said Morayef, calling on nations to “take concrete measures to respect their obligations under international law and to avoid complicity in Israeli violations and crimes against Palestinians by halting all trade, investment, and cooperation that contribute to maintaining the unlawful occupation, apartheid, and the ongoing campaign of ethnic cleansing.”
“Hiding behind empty rhetoric is not only cowardly, it is enabling further abuses,” she added. "For Palestinians, it continues to be deadly.”
From Common Dreams via This RSS Feed.
preview

Mroooooooule.

Mroooooooule.
preview
“Dan Aykroyd, John Candy, Gilda Radner and Cheech and Chong present this compilation of classic bad films from the 50’s, 60’s and 70’s. Special features on gorilla pictures, anti-marijuana films and a special tribute to the worst film maker of all-time, Ed Wood.”
Featuring clips from everything from APE (1976) to Zombies of the Stratosphere (1952), a lot of films shown in or worthy of the #Monsterdon watch party.
“Dan Aykroyd, John Candy, Gilda Radner and Cheech and Chong present this compilation of classic bad films from the 50’s, 60’s and 70’s. Special features on gorilla pictures, anti-marijuana films and a special tribute to the worst film maker of all-time, Ed Wood.”
Featuring clips from everything from APE (1976) to Zombies of the Stratosphere (1952), a lot of films shown in or worthy of the #Monsterdon watch party.
preview
The latest forecast from the Dallas Fed projects the state will add jobs at a rate of less than 1% this year, well below Texas’ historical average.
Texas lost nearly 19,000 jobs in September, according to figures published this week by the Federal Reserve Bank of Dallas, representing the state’s largest monthly net jobs decrease since June 2025. The rough month also helped push the Reserve Bank’s 2026 Texas employment growth forecast downward to less than 1% — a significant drop from recent months and far below the state’s historical average.
September’s weak job numbers come as the country faces numerous economic headwinds, including high energy costs, interest rates that continue to weigh on homebuilding and an immigration crackdown restricting hiring in some key industries.
“Texas employment declined in September, slowing year-to-date job growth to 0.8%, well below the state’s long-running average of 2%,” Luis Torres, a Dallas Fed senior business economist, said in a statement. “The moderation in job growth is consistent with current labor supply constraints that partly result from sharply lower immigration.”
The latest forecast from the Dallas Fed projects the state will add jobs at a rate of less than 1% this year, well below Texas’ historical average.
Texas lost nearly 19,000 jobs in September, according to figures published this week by the Federal Reserve Bank of Dallas, representing the state’s largest monthly net jobs decrease since June 2025. The rough month also helped push the Reserve Bank’s 2026 Texas employment growth forecast downward to less than 1% — a significant drop from recent months and far below the state’s historical average.
September’s weak job numbers come as the country faces numerous economic headwinds, including high energy costs, interest rates that continue to weigh on homebuilding and an immigration crackdown restricting hiring in some key industries.
“Texas employment declined in September, slowing year-to-date job growth to 0.8%, well below the state’s long-running average of 2%,” Luis Torres, a Dallas Fed senior business economist, said in a statement. “The moderation in job growth is consistent with current labor supply constraints that partly result from sharply lower immigration.”
preview
USA Today owns seven daily newspapers in the state, but its latest list of the nation’s best taco places completely omits Texas restaurants. Why tear out the heart of taco country?
This year has seen a myriad of taco lists, including our own roundup of the top 25 new or improved taquerias in Texas, but the latest, from USA Today, is perhaps the most flabbergasting. Texas-based Mexican restaurants, taquerias, and trucks are absent. Allow me to repeat that: Texas has zero representation on the list. I couldn’t let this stand without commentary.
Each recommended taco restaurant is in a city with a USA Today–owned paper, but Texas has seven such newspapers—the Abilene Reporter-News, the Amarillo Globe-News, the Corpus Christi Caller-Times, the El Paso Times, the Lubbock Avalanche-Journal, the San Angelo Standard-Times, and the Wichita Falls Times Record News—with no corresponding taquerias on the list. There is no excuse for leaving out taco spots like El Paso’s El Cometa, Taquería Elemi, and Taconeta. The absence of Jiménez y Friends Barbecue y Taqueria, in Lubbock, is a mistake. And Corpus Christi’s Southside Barbacoa deserves consideration, for not only its barbacoa but also its carne guisada.
USA Today owns seven daily newspapers in the state, but its latest list of the nation’s best taco places completely omits Texas restaurants. Why tear out the heart of taco country?
This year has seen a myriad of taco lists, including our own roundup of the top 25 new or improved taquerias in Texas, but the latest, from USA Today, is perhaps the most flabbergasting. Texas-based Mexican restaurants, taquerias, and trucks are absent. Allow me to repeat that: Texas has zero representation on the list. I couldn’t let this stand without commentary.
Each recommended taco restaurant is in a city with a USA Today–owned paper, but Texas has seven such newspapers—the Abilene Reporter-News, the Amarillo Globe-News, the Corpus Christi Caller-Times, the El Paso Times, the Lubbock Avalanche-Journal, the San Angelo Standard-Times, and the Wichita Falls Times Record News—with no corresponding taquerias on the list. There is no excuse for leaving out taco spots like El Paso’s El Cometa, Taquería Elemi, and Taconeta. The absence of Jiménez y Friends Barbecue y Taqueria, in Lubbock, is a mistake. And Corpus Christi’s Southside Barbacoa deserves consideration, for not only its barbacoa but also its carne guisada.
